|
If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
Datasheet File OCR Text: |
om .c 4U ENGINEERING SPECIFICATIONS et he TFT COLOR LCD MODULE S ta a TM070WA-22L01 D . 18cm (7 inch) diagonal w Resolution (480 x R G B x 234 dots) w w With CFL backlight unit * * * * * * m o .c U t4 e e h S ta a .D w w w Nonglare surface type (TENTATIVE) Ver. 2 Oct.12, 2000 Tottori SANYO Electric Co., Ltd. Electronic Device Business Headquarters LCD Division 3-201, Minami-yoshikata, Tottori, 680-8634 Japan TEL: 81-857-21-2941 FAX: 81-857-21-2162 om .c 4U et he aS at .D w w w s REVISION HISTORY DATE REVISION NO. PAGE DESCRIPTIONS Sep.8,00 Sep.19,00 Ver.0 Ver.1 2 4 7 8 10 Initial release ABSOLUTE MAXIMUM RATINGS : Lamp current Max.(4.0) (4.5) Measurement condition Change BACKLIGHT CHARACTERISTICS Change RELATIONSHIP BETWEEN INPUT DATA AND DISPLAY POSITION Change DISPLAY METHOD AND CHARACTERISTICS Change VCOM AC VCOM P-P 9-12 Page Change Oct.12,00 Ver.2 2 Active viewing area Change : 87.08(H) 87.05(H) ABSOLUTE MAXIMUM RATINGS:Humidity CONDITION Ta 40C Ta 60C MECHANICAL ENVIRONMENT Note1) Change 4 3 8 10 Backlight power supply add Viewing angle range Change Cinema mode Vertical/Display area/PAL : S = 20/22 20/21 Power Supply currentAEPower Supply Change Tottori SANYO Electric Co., Ltd. TM070WA-22L01 Ver.2 Page s NOTICES 1. Please carefully treat this spec since it includes the copyright-related contents. It is strictly prohibited to copy or reprint this spec regardless of partially or whole, without our prior written approval. 2. Content in this spec shall not guarantee any of the third party's intellectual property right or other patents. Tottori SANYO will not be liable for the industrial property issue arising between user and the third party. 3. This product is designed and manufactured only for general AV instruments usage. It is not suitable for the purpose or equipment that required extremely high reliability or safety. Ex: Aerospace instrument, control equipment for nuclear power, lifes. 4. Please use this product correctly according to operating conditions and precautions for use stated in this document. Please install safety proof in your designing to avoid human accident, fire accident and social damage which may be resulted from malfunction of this product. 5. Radiation proof design is not applied on this product. 6. Tottori SANYO will not be liable for any damages or disadvantages caused by our product in the event that user does not follow condition or precaution stated in our spec. 7. Separate inspection standard spec is applied for cosmetic criteria. 8. If you should have questions on this product, please kindly contact our sales section. Tottori SANYO Electric Co., Ltd. TM070WA-22L01 Ver.2 Page 1/20 s MECHANICAL CHARACTERISTICS Ta=25C ITEM Module size Resolution Dot pitch Pixel pitch Active viewing area Bezel opening area Weight SPECIFICATION 167.0 (W) X 102.0 (H) X 11.0typ (t) 480 X R * G * B (W) X 234 (H) 0.107 (W) X 0.372 (H) 0.321 (W) X 0.372 (H) 154.1 (W) X 87.05 (H) 158.1(W) X 91.1(H) 220 TYP. UNIT mm pixel mm mm mm mm g s ABSOLUTE MAXIMUM RATINGS ITEM Logic/Source power supply voltage Power supply voltage for gate driver Common electrode driving signal TFT exclusive RGB Input signals Output signals Lamp current Ambient temperature SYMBOL CONDITIONS VSH H VGH H-L VGH-VGL L VGL VCOM DC P-P VR,VB,VG VI VO Ll TST Storage TOP Operation Ta 60C MIN -0.3 MAX 6.0 UNIT V NOTE Common power supply voltage of Logic Humidity -0.3 25 V 0 31 V -21.0 +0.3 V 3.0 V 0 0 6.0 V -0.3 VSH+0.3 V -0.3 VSH+0.3 V -0.3 VSH+0.3 V 3 4.5 mA 85 -30 C 85 -30 90 %RH Note 1),2) not beyond 240H Note 3) Note 1) Care should be taken so that the LCD module may not be subjected to the temperature beyond this specification. Note 2) Ambient temperature shows temperature on LCD surface. Module temperature is apt to increace while it's driving due to CFL heat etc. Please design carefully not to exceed +85 degree C on every surface of LCD that shoud come to contact with any other equipment. Temperature for operation is one which only assures LCD operation. Contrast, response time,or other LCD quality is regulated under condition of Ta=+25 degree C. Note 3) Please be advised that dew condensation level should be less than maximum wet bulb temperature 58 degree C. Dew condensation may induce leak current, and also influence LCD performance. s MECHANICAL ENVIRONMENT Vibration Shock - Storage Storage - 2.9 100 G G Note 1) XYZ 6ms/direction Note 1) Vibration frequency : 8 ~ 33.3 Hz displacement : 1.3mm Vibration frequency : 33.3 ~ 400 Hz Sweep time : 15 min./1 sweep total test time : X, Y - 2Hr Z - 4Hr Z X Y Tottori SANYO Electric Co., Ltd. TM070WA-22L01 Ver.2 Page 2/20 s OPTICAL CHARACTERISTICS (1) ITEM Viewing angle range Contrast ratio Response time Color of CIE Coordinate SYMBOL CONDITIONS = 0 K5 = 90 =180 =270 = 0 , = 0 = 0, = 0 MIN 40 60 30 60 100 - Rise Fall White K tr tf x y = 0, = 0 Ta=25C, VSH=5.3V, fV=60Hz TYP MAX UNIT NOTE deg. Note 1), 4) Note 2), 4) 30 ms. Note 3), 4) 20 Note 4) 0.300 0.298 - = 180 DATA Black 100% White Black = 90 = 270 B 90% 10% 0% = 0 Tr Tf Note 3) Response time Note 1) and are defined as above figure. Note 2) Contrast ratio "K" is defined below formula. K= Brightness at ON (White) Brightness at OFF (Black) Note 4) Measurement codition x VSH = 5.3V, VGH = 15V, VGL = -15.5V, VCOM DC = 1.8V, VCOM P-P = 5.0V y VR/VG/VB DC = VSH/2, VR/VG/VB AC = 2.0V Follow brightness measurement condition in next item. Tottori SANYO Electric Co., Ltd. TM070WA-22L01 Ver.2 Page 3/20 s OPTICAL CHARACTERISTICS (2) Ta = 25C ITEM Brightness SYM. CONDITIONS MIN TYP MAX B 400 - UNIT NOTE 2 cd/m Surface Brightness of LCD Note) The brightness shall be the following point. 1/2Hp Active area 1/2Vp Fig.1 Measurement point Vp :Total Number of Vertical pixel Hp :Total Number of horizontal pixel Measurement equipment : BM-7 (TOPCON Corp.) Measurement condition x Ambient temperature : 25 2C y LCD : All pixels are WHITE Measure after 30 minutes of CFL warm up. IL = 4.5mArms, CFL inverter: Operating TDK CXA-L0612A-VJL or equivalent inverter with capability of frequency 50kHz, Lamp current max. 4.5mA s BACKLIGHT CHARACTERISTICS Ta = 25C ITEM Lamp voltage Lamp current Operating frequency Start up voltage Start up voltage Lamp life Backlight power supply SYM. CONDITIONS MIN TYP MAX UNIT VL 740 Vrms IL fL Vs1 Vs2 tOL WL 3.0 40 10000 48 3.3 4.5 55 1750 1800 KHz Vrms Vrms Hours W NOTE at IL=4.5mArms (Recommended value) at Ta = 25C at Ta = -30C at IL = 4.5mArms, Note 1) at IL = 4.5mArms mArms (Recommended value) Note 1) CFL Lamp life indicates time from initial Lamp brightness to half of original brightness. Note 2) Inverter GND shall be connected to LCD frame. (Please refer to outer dimension drawing) LCD frame is connected to internal circuitry GND. Tottori SANYO Electric Co., Ltd. TM070WA-22L01 Ver.2 Page 4/20 s BLOCK DIAGRAM Tottori SANYO Electric co., Ltd. TM070WA-22L01 Ver.2 Page 5/20 1F BLOCK 24 PIN SIGNAL HSYIO VSYIO CKH CSY N/P L/R U/D SWC DM1 DM2 DM3 POLC POLV PWM TEST SWV 480 X (RGB) X 234 Timing Controller TFT Panel vco TFT exclusive RGB VR VG VB VSH VCOM VGH VGL GND Power supply voltage Level Shift FPC s INTERFACE PIN CONNECTIONS LCM : CN PIN NO. 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 SYMBOL HSYIO POLC CSY VGH POLV VB VR VG GND VSH VGL VCOM N/P VSYIO L/R U/D SWC PWM TEST CKH DM1 DM2 DM3 SWV I/O I/O O I I O I I I I I I I I I/O I I I O O I/O I I I O FUNCTION Input/Output horizontal sync.signal (low active) Polarity alternating signal for common signal Composite sync.signal (high active) Power supply for gate driver (high level) Polarity alternating signal for video signal Color video signal (Blue) Color video signal (Red) Color video signal (Green) GND Positive power supply voltage Power supply for gate driver (low level) Common electrode driving signal Selection for NTSC or PAL (NTSC=VSH, PAL=GND) Input/Output vertical sync.signal (low active) Selection for horizontal scanning direction Selection for vertical scanning direction Selection for input/output direction of CKH,HSYNC,VSYNC Timinng signal for PWM dimming of backlight Open use only Input/output clock signal Selection for display mode Selection for display mode Selection for display mode Video selection timming signal I/F CN : SFR24R-1ST(FCI) Suitable FPC : Pitch 0.8mm, Width 20mm Back Light : FLCN PIN NO. SYMBOL 1 H.V 2 N.C 3 LGND FUNCTION High voltage for CFL No Connection Low voltage for CFL FLCN : BHR-03VS-1(JST) Suitable mating connector : SM02 (8.0) B-BHS-1 (JST) Tottori SANYO Electric Co., Ltd. TM070WA-22L01 Ver.2 Page 6/20 s RELATIONSHIP BETWEEN INPUT DATA AND DISPLAY POSITION 1*1 2*1 3*1 1*2 2*2 1*3 1*479 1*480 2*480 * * * * * Vp * Hp RGB * * * * 233*1 234*1 234*2 234*479 233*480 234*480 s FUNCTION,MODE AND TERMNALS Mode terminals SWC N/P DM1 DM2 DM3 HSYIO L H L Hsync H H L L H output or L L L L H L H Hsync H H or output L H H other settings Hsync or H or L output L H H H L H Hsync VSYIO CKH Vsync Lo output Vsync output Vsync output Vsync Sync. signal I/O terminals CSY SWV Remarks Test Conposite Test mode output signal sync input output Lo masking Conposite NTSC or PAL mode output signal sync input (Normal mode) output Lo Lo Conposite NTSC or PAL mode output output sync input (Full,Wide,Cinema) Pixel Lo Input Hi or External clock input input clock input output Lo fixed synchronous mode value Note 1) We recommend external clock synchronize method except for TV display usage. Note 2) Please invert polarity of video signal VR,VG and VB in sync with invert timing of POLV signal. (Please refer Figure A.) Note 3) Please invert polarity of VCOM in sync with invert timing of POLC signal. (Please refer Figure B.) Note 4) Horizontal synchronized signal is output in sync with CSY signal when SWC is Hi. When SWC is Low, LCD module is operated in sync with Horizontal synchronized signal for HSYIO terminal. (Please refer Figure C,D,G and F.) Note 5) In normal mode, non-display area at both edge of display can be better screened by masking video signal following SWV output signal. (Please refer timing chart E.) Note 6) PWM signal for CFL brigtness control is output form PWM terminal. (Please refer Figure H.) But please use it when normal NTSC or PAL signals are inputted. Tottori SANYO Electric Co., Ltd. TM070WA-22L01 Ver.2 Page 7/20 s DISPLAY METHOD AND CHARACTERISTICS Horizontal H=VSH L=GND DM1 DM2 DM3 Display Mode Display method, Feature Display 4:3 image long sideways. SOURCE Display area Sampling Vertical Disply area NTSC PAL Tottori SANYO Electric co., Ltd. TM070WA-22L01 Ver.2 Page 8/20 H H H H H L Full mode 4:3 signal Navigation Signal Signal area Senter Both side Same Wide1 mode Display perfect circle around center 4:3 signal better than Full screen mode. Display perfect circle all around the screen. Both edge screen can be masked with SWV. Display 16:9 image. Display perfect circle around center better than Wide 1 mode. Top and bottom images are eliminated. Signal area Senter :Slow Botn side:Fast Senter :Slow Botn side:Fast Modulation wide1,2 Compress H L H Normal mode 4:3 signal Signal area & Blank Signal area Signal area S=1/1 S=6/7 Fig.2-3 Compress H L L H L H Cinema mode Wide 2 mode Wide signal(16:9) 4:3 signal Senter Both side Same Senter :Slow Botn side:Fast - S=4/3 S=20/21 Fig.2-4 Extend Compress S=5/4 S=10/11 Fig.2-5 Extend Compress -| - L L L H L L L H L Test mode Test mode Test mode This mode is unusable due to test mode. This mode is unusable due to test mode. This mode is unusable due to test mode. - - Fig2-1 Full mode Fig2-2 Wide1 mode Fig2-3 Normal mode Fig2-4 Chinema mode Fig2-5 Wide 2 mode xNTSC MODE (N/P=H, SWC=H) (a1) Horizontal * * * Full mode, Wide1 mode, Wide2 mode, Cinema mode From falling edge of HSYIO output to 12.8 - 63.1uS. (a2) Horizontal * * * Normal mode From falling edge of HSYIO output to 7.5 - 68.5uS. (b1) Vertical * * * Full mode, Wide2 mode, Normal mode From falling edge of VSYIO output to 20H - 253H. (b2) Vertical * * * Cinema mode From falling edge of VSYIO output to 50H - 225H. (b3) Vertical * * * Wide2 mode From falling edge of VSYIO output to 43H - 229H. xPAL MODE (N/P=L, SWC=L) (a1) Horizontal * * * Full mode, Wide1 mode, Wide2 mode, Cinema mode From falling edge of HSYIO output to 12.8 - 63.1uS. (a2) Horizontal * * * Normal mode From falling edge of HSYIO output to 7.5 - 68.5uS. (b1) Vertical * * * Full mode, Wide2 mode, Normal mode From falling edge of VSYIO output to 26H - 298H. Except for Even Number Field (14n + 13) and (14n + 21), Odd Number Field (14n + 18) and (14n + 24). n = (1, 2, 3, * * * , 20) (b2) Vertical * * * Cinema mode From falling edge of VSYIO output to 40H - 284H. Except for Even Number Field (42n + 15) and (14n + 37), Odd Number Field (42n + 1) and (42n + 23). n = (1, 2, 3, * * * ,6) (b3) Vertical * * * Wide2 mode From falling edge of VSYIO output to 35H - 289H. Except for Even Number Field (22n + 15) and (22n + 25), Odd Number Field (22n + 22) and (22n + 32). n = (1, 2, 3, * * * ,12) xEXTERNAL CLOCK MODE (N/P=H, SWC=L, DM1, 2, 3=H) (a1) Horizontal From falling edge of HSYIO output to 99 - 578CLK. CLK is indicated as external CLK number. (b3) Vertical From falling edge of VSYIO output to 20H - 253H. Tottori SANYO Electric Co., Ltd. TM070WA-22L01 Ver.2 Page 9/20 s ELECTRICAL CHARACTERISTICS VSH=5.3V, Ta=25C ITEM SYMBOL CONDITIONS MIN TYP MAX UNIT NOTE Logic/Source VSH 5.0 5.3 5.5 V Note 3) power supply voltage VGH Power supply voltage H 14.5 15.0 15.5 V VGL for gate driver L -16.0 -15.5 -15.0 V Common electrode driving DC center 1.0 1.8 2.5 V Note 1) VCOM signal P-P 4.0 5.0 6.0 V Note 2),4) TFT exclusive RGB DC center TYP-0.1 VSH/2 TYP+0.1 V Note 3) VR,VG,VB AC White pattern +1.5 2.0 +VSH/2-0.4 V POLV=H Note4),5) AC Black pattern -1.5 -2.0 -VSH/2+0.4 V POLV=H Note4),5) AC White pattern -1.5 -2.0 -VSH/2+0.4 V POLV=L Note4),5) AC Black pattern +1.5 2.0 +VSH/2-0.4 V POLV=L Note4),5) Input signals VIH High level 0.7VSH V Note 6) VIL Low level 0.3VSH V Input signals VIH High level 2.85 3.75 V Note 7) VIL Low level 1.15 V V+-VHysteresis 1.30 1.75 V IOL=-3mA VSH-0.4 Output signals VOH V Note 8) IOH=3mA VOL 0.4 V Power Supply current IVSH VSH=5.3V 80 120 mA Note 9,10) IVGH 1.4 VGH=15V 3 mA IVGL VGL=-15.5V 6 15 mA WS Power Supply 538 914 mW Note 1) Note 2) Note 3) Note 4) Note 5) Note 6) Note 7) Please adjust DC voltage on opposite electrode (VCOM) to optimum BIAS voltage in order to minimize flicker. Please optimize voltage of each module to achieve optimum contrast. Please control voltage fluctuation less than 0.1V after VCOM is adjusted. +/- amplitude shall be symmetry. In case of POLV = Low, the signal polarity inverts working with polarity of VCOM. Symmetric terminal name: HSYIO,VSYIO (CMOS INPUT) Symmetric terminal name: CSY,N/P,L/R,U/D,SWC,CKH,DM1,DM2,DM3 (CMOS Schmitt INPUT) Note 8) Symmetric terminal name: HSYIO,POLC,POLV,VSYIO Display pattern: ALL BLACK FULL MODE fv : 60Hz VCOM DC = 1.8V, VCOM P-P = 5.0V VR/VG/VB DC = VSH/2 VR/VG/VB AC = 2.0V Note10) Value for module circuitry portion (except for backlight) Tottori SANYO Electric Co., Ltd. TM070WA-22L01 Ver.2 Page 10/20 s ELECTRICAL CHARACTERISTICS AC TIMING NTSC : fH=15.73kHz, fV=60Hz, t HI=4.7s PAL : fH=15.63kHz, fV=50Hz, t HI=4.7s VSH=5.3V GND=0V, Ta=25C ITEM SYMBOL VID Input voltage t rVI Input composite sync rising time t fVI [CSY]Vertical location falling time t DV Polarity alternating delay time [POLV-VRGB] t DC Polarity alternating delay time [POLC-VCOM] t rPL Output polarty signal rising time t fPL [POLC,POLV] falling time MIN 0 TYP - - - MAX VSH 0.2 0.2 4 4 0.5 0.5 UNIT V NOTE s s s s s s VSH=5.3V GND=0V, Ta=25C ITEM SYMBOL fH(N) Input composite sync frequency NTSC fH (P) horizntal location PAL t HI(N) pulse wide NTSC t HI(P) PAL t rHI1 rising time t fHI1 [CSY] falling time fV (N) Input composite sync frequency NTSC fV (P) Vertical location PAL pulse wide NTSC t VI(N) t VI(P) [CSY] PAL f H0 Output horizontal frequency t H0 sync signal pulse wide t rH0 rising time t fH0 [HSYIO] falling time horizontal sync phase t pd1 rising HSY t pd2 [HSYIO-CSY] falling HSY f V0 Output vertical frequency t V0 sync signal pulse wide t VH0 Output phase t rV0 [VSYIO] rising time t fV0 falling time t DV1 Vertical sync phase ODD FIELD t DV2 [CSY-VSYIO] EVEN FIELD MIN TYP MAX 15.13 15.73 16.33 15.03 15.63 16.23 4.2 4.7 5.2 4.2 4.7 5.2 0.2 0.2 fH/284 fH/262.5 fH/258 fH/344 fH/312.5 fH/304 3 2.5 fH 4.7 0.5 0.5 2.1 2.1 fV 4 11 0.5 0.5 1 0.5 - UNIT kHz kHz s s s s Hz Hz H H kHz s s s Hz Hz Hz H s s s H H NOTE Note 1 Note 1 Note 2 1H=1/fH Sync HSYIO Note 1) Note 2) Standard complex synchronized signal [CSY] type of NTSC/PAL signal shall be inputted. It would be a factor of display quality degradation if nonstandard synchronized signal were inputted. Varied by tpd1 value. Tottori SANYO Electric Co., Ltd. TM070WA-22L01 Ver.2 Page 11/20 VSH=5.3V GND=0V, Ta=25C ITEM Input CLK sync signal frequency H pulse wide L pulse wide rising time [CKH] falling time Input horizontal sync signal frequency pulse wide rising time [HSYIO] falling time Input Vertical sync signal Data setup time Data hold time Data setup time Data hold time frequency [VSYIO] pulse wide SYMBOL fCL1 t WH t WL t rCL1 t fCL1 fHI t HI t rHI2 t fHI2 fVI t VI tSU1 tHO1 tSU2 tHO2 MIN 8.5 20.0 20.0 1 50 1 25 25 1.0 1.0 TYP 9.5 5 3 - MAX 9.8 10.0 10.0 9 0.05 0.05 5 - UNIT MHz ns ns ns ns kHz s s s Hz H ns ns s s NOTE fCLI/650 fCLI/608 fCLI/590 fHI/262 fHI/258 Note 3) Note 4) Note 3) In external clock input mode, they show input phase contrast of CKH and HSYIO signal. Data is loaded latching with CKH rising signal. Note 4) In external clock input mode, they show input phase contrast of HSYIO andVSYIO signal. Data is loaded latching with HSYIO falling signal. Tottori SANYO Electric Co., Ltd. TM070WA-22L01 Ver.2 Page 12/20 s ELECTRICAL CHARACTERISTICS AC TIMING t r PL t f PL POLV t DV WHITE BLACK VR AC VG DC(center) AC VB +2V(TYP.) -2V(TYP.) BLACK WHITE VSH/2 Fig-A t r PL t f PL POLC t DC +2.5V(TYP.) VCOM DC(center) (1.8V) -2.5V(TYP.) P-P Fig-B t rHI1 t fHI1 CSY t t t pd2 1H = 63.5 s (NTSC) 1H = 64.0 s (PAL) HSYIO t fHO t HO t rHO Fig-C Tottori SANYO Electric Co., Ltd. TM070WA-22L01 Ver.2 Page 13/20 t VI CSY t DV1 ODD FIELD t VO EVEN FIELD t DV2 VSYIO t rVI t fVI t rVO t fVO VSYIO t VHO t VHO HSYIO HSYIO 1H = 63.5 S (NTSC) 1H = 64.0 S (PAL) POLV Fig-D HSYIO 13.1s 50.1s SWV MASKING PERIOD IMAGE PERIOD MASKING PERIOD Fig-E (NORMAL MODE DM1=Hi, DM2=Low, DM3=Hi) Tottori SANYO Electric Co., Ltd. TM070WA-22L01 Ver.2 Page 14/20 t VI VSYIO t rVI t fVI VSYIO HSYIO t HI t t t fHI2 t rHI2 HSYIO 1H=63.5 S (typ.) POLV Fig-F (N/P=Hi) CKH tHO1 tSU1 t fCL1 t rCL1 t WL t WH HSYIO t fHI2 t HI t rHI2 POLV t DV WHITE BLACK VR VG DC(center) VB BLACK WHITE Fig-G (N/P=Hi, DM1=DM2=DM3=Hi) Tottori SANYO Electric Co., Ltd. TM070WA-22L01 Ver.2 Page 15/20 s PWM DIMMING TIMING VSYIO 525H(NTSC) 625H(PAL) PWM (NTSC) 105H Tottori SANYO Electric Co., Ltd. 525H(NTSC) 625H(PAL) nH 1H 1/2H 1/2H 105H (NTSC) 89H (PAL) PWM (PAL) 89H magnify time VSYIO TM070WA-22L01 nH Inverter oscillation HSYIO PWM Ver.2 Inverter no oscillation Fig-H Page 16/20 s POWER ON/OFF SEQUENCE REQUIREMENT VGH VSH VGH, VSH VGL VGL MIN 2V MIN 2V SIGNALS MIN 1V MIN 1V CFL i (V=1 FIELD time) Tottori SANYO Electric Co., Ltd. TM070WA-22L01 Ver.2 Page 17/20 s PRECAUTIONS Caution for designing 1. This technical spec just explains general specification of the LCD module. Please request us customer specification before you start designing. 2. Please apply waterproof design to avoid any moisture or saline matter into LCD module. 3. Long CFL wiring may result in increase of leak current. Please carefully design the wiring in order to minimize leak current, which causes reduction of inverter start-up voltage. 4. Please implement enough shielding for LCD's excess nose radiation not to interfere other peripheral device by. Caution for LCD handling 1. Disassembling or remodeling of LCD module is prohibited. 2. Please do not touch volume control no the backside of module. In the case you change it, LCD module may not achieve proper performance mentioned in the spec. 3. LCD shall be stored in same packing material during import, and under the condition of room temperature (10-30 degree C). Please do not leave LCD modules under the direct sunlight or strong infra-red radiation for a long period time to prevent liquid Tottori SANYO Electric Co., Ltd. TM070WA-22L01 Ver.2 Page 18/20 4. LCD module integrates semi-conductor components. Please handle it with static electricity protection. 5. Please turn off the power supply before plugging or unplugging LCD module. 6. Since high voltage is supplied to CFL when it's driving, please make careful treatment and design around CFL portion. And please be sure that CFL connector does not have a loose connection to prevent large risk of fire due to high voltage. 7. Please do not rub, push, or hit LCD surface with hard tool etc. Film on surface is easily scratched. When droplets of water or dirt are on the surface, please gently remove them with soft fabric. 8. Glass in LCD module is easily damaged or broken when it is dropped, strongly pinched or hit. Please be careful not to cut your hand if you break the glass. 9. In case that liquid crystal fluid runs off from broken panel, please do not swallow or handle the fluid for any reason. If liquid crystal accretes hands or clothes, please remove it with or alcohol and wash them. By any chance, liquid crystal ge. 10. Cold Cathode Lamp contains small amount of mercury. Please follow local ordinances or regulation for disposal. Tottori SANYO Electric Co., Ltd. TM070WA-22L01 Ver.2 Page 19/20 |
Price & Availability of TM070WA22L03 |
|
|
All Rights Reserved © IC-ON-LINE 2003 - 2022 |
[Add Bookmark] [Contact Us] [Link exchange] [Privacy policy] |
Mirror Sites : [www.datasheet.hk]
[www.maxim4u.com] [www.ic-on-line.cn]
[www.ic-on-line.com] [www.ic-on-line.net]
[www.alldatasheet.com.cn]
[www.gdcy.com]
[www.gdcy.net] |