 |
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
| Datasheet File OCR Text: |
| BNC Series BNC Type Connectors www..com BNC series is most widely used as 50 coaxial cable connectors. This series is used specially for interface of fre- quent fit-in/pull-out instruments by small size/ light weight bayonet lock mechanism. Note: BNC series is intermateable with BNC75 series. (75 group) If 75 cable is used for this series, the frequency to be applied must be below 200MHz. For more than 200MHz, BNC75 series must be used. CONFORMING STANDARD JIS-C-5412 MIL-C-39012 DSP-C-6202 NTTSpec No.2095 SPECIFICATION Characteristic Impedance Dielectric withstanding voltage Insulation resistance Contact resistance VSWR 50 1500V AC (rms) for 1 minute 1000Mmin. at 500V DC 3m max. 1.3max. at DC2GHz Specifications depends on each connector although these are basic specifications. MATERIAL/FINISH Shell (Body) Contact (male) Contact (female) Insulators Gaskets Copper alloy/Silver or Nickel plating Copper alloy/Silver or Gold plating Copper alloy/Silver or Gold plating PTFE Silicone rubber Please ask us for the cable assemblies to assure its performance. 1 BNC Series Plug Clamp Type 14.5 A www..com Unit : mm P/N BNC-P-3 Applicable Cable 3D-2V 3C-2V 3D-2V 3C-2V 3D-2V 3C-2V RG-55/U RG-58/U RG-55/U RG-58/U RG-62/U RG-62/U RG-59/U RG-62/U RG-59/U RG-62/U A 6.4 6.4 6.4 5.4 5.4 6.6 6.6 6.55 6.55 L 25.0 25.0 25.0 27.0 27.0 26.2 26.2 24.6 24.6 Finish Shell Ag Ni Ni Ag Ni Ag Ni Ag Ni Contact Ag Ag Au Ag Ag Ag Ag Ag Ag L BNC-P-3-Ni BNC-P-3-NiCAu BNC-P-58U BNC-P-58U-Ni BNC-P-62U BNC-P-62U-Ni UG-260/U UG-260/U-Ni P/N 14.5 A Applicable Cable 3D-2W 3C-2W 3D-2W 3C-2W 3C-2T 3C-2T A 7.1 7.1 8.0 8.0 (L) 29.1 29.1 30.0 30.0 Finish Shell Ag Ni Ag Ni Finish Shell Ag Ni Ag Ni Ni Ni Ag Ag Ni Contact Ag Ag Ag Ag Ag Ag Ag Ag Ag Contact Ag Ag Ag Ag BNC-P-3W BNC-P-3W-Ni-1 BNC-P-3CT BNC-P-3CT-Ni (L) 17.5 14.5 P/N BNC-P-5 A Applicable Cable 5D-2V 5C-2V 5D-2V 5C-2V 5D-2W 5C-2W 5D-2W 5C-2W 5C-FB 5D-FB 5C-2T 7C-2V 7C-2V A 8.6 8.6 9.2 9.2 8.6 8.1 10.1 11.25 11.25 (L) 37.0 37.0 37.0 37.0 37.0 39.0 37.0 37.0 37.0 (L) BNC-P-5-Ni BNC-P-5W BNC-P-5W-Ni BNC-P-5CFB BNC-SP-5DFB BNC-P-5C2T BNC-P-7 BNC-P-7-Ni 2 BNC Series Plug Crimp Type Applicable Cable 1.5D-2V 1.5C-2V 1.5D-2V 1.5C-2V 2.5D-2V 2.5C-2V 2.5D-2V 2.5C-2V RG-179/U RG-179/U 1.5D-2V 1.5C-2V 2.5D-2V 2.5C-2V RG-188A/U RG-174/U Finish Shell Ag Ni Ag Ni Ag Ni Ni Ni Ni Ni Contact Ag Ag Ag Ag Ag Ag Au Au Au Au Finish Shell Ni Ni Ni Ni Ni Ni Ni Ni Ni Finish Shell Ag Ni Ni Ni Contact Ag Ag Au Au Contact Au Au Au Au Au Au Ag Au Au www..com Unit : mm 14.5 P/N BNC-P-1.5V-CR A 5.5 5.5 5.5 5.5 5.5 5.5 5.5 5.5 5.5 5.5 A Hand Crimp Tool P/N CR-H-1100 CR-H-1100 CR-H-1100 CR-H-1100 CR-H-1100 CR-H-1100 CR-H-1100 CR-H-1100 CR-H-1100 CR-H-1100 (31.7) BNC-P-1.5V-CR-Ni BNC-P-2.5V-CR BNC-P-2.5V-CR-Ni BNC-P-179U-CR BNC-P-179U-CR-Ni BNC-P-1.5V-CR-NiCAu BNC-P-2.5V-CR-NiCAu BNC-P-188A/U BNC-P-174U-CR 14.5 P/N BNC-P-1.5CQEW-CR10 BNC-P-1.5D-CR10 BNC-P-3C-CR10-BOOT BNC-P-3D-CR10-BOOT BNC-P-58U-CR10 BNC-SP-1.5DW-CR1 BNC-SP-1.5D2W-CR10-1 BNC-P-1.5D2W-CR10-201 BNC-P-3D-CR10 A Applicable Cable 1.5C-QEW 1.5D-XV 1.5D-QEV 3C-2V 3D-2V RG-58/U RG-58A/U 1.5D-QEW 1.5D-QEW 1.5D-2W 1.5D-QEW 3D-2V A 5.5 4.0 7.1 7.1 6.3 4.8 5.5 5.5 7.1 L 24.3 23.3 24.3 24.3 24.3 29.2 24.0 24.3 24.3 Hand Crimp Tool P/N CR-H-1100 CR-H-1120 CR-H-1116 CR-H-1116 CR-H-1115 CR-H-1156 CR-H-1100 CR-H-1100 CR-H-1116 Note Deltamate Deltamate Deltamate Deltamate Deltamate L P/N 14.5 A Applicable Cable 3C-2V 3C-2V 5C-2V 5C-2V A 7.0 7.0 9.5 9.5 (L) 28.0 28.0 28.7 28.7 Hand Crimp Tool P/N CR-H-1102 CR-H-1102 CR-H-1130 CR-H-1130 Note boot (W) boot (B) BNC-P-3C-CR1 BNC-P-3C-CRI-Ni BNC-P-5C-CR10 BNC-P-5C-CR10-B (L) 3 BNC Series Right Angle Plug Clamp Type Applicable Cable 3D-2V 3C-2V 3D-2V 3C-2V 3D-2V 3C-2V 3D-2V 3C-2V 5D-2V 5C-2V 5D-2V 5C-2V RG-55/U RG-58/U RG-55/U RG-58/U RG-55/U RG-58/U www..com Unit : mm 25 P/N BNC-LP-3 A 33 A 6.4 6.4 6.4 6.4 8.6 8.6 5.38 5.38 5.4 Finish Shell Ag Ag Ni Ni Ag Ni Ag Ni Ag Contact Ag Au Au Ag Ag Ag Ag Ag Ag BNC-LP-3-CAu BNC-LP-3-NiCAu BNC-LP-3-Ni BNC-LP-5 BNC-LP-5-Ni BNC-LP-58U BNC-LP-58U-Ni BNC-LP-55U 27 P/N BNC-LP-5 33 Applicable Cable 5D-2V 5C-2V 5D-2V 5C-2V Finish Shell Ag Ni Contact Ag Au BNC-LP-5-Ni 33 14.3 P/N BNC-LP-5D2W Applicable Cable 5D-2V 5C-2V Finish Shell Ni Contact Au 40 17.5 4 BNC Series Jack Clamp Type www..com Unit : mm A P/N BNC-J-3 BNC-J-3-Ni BNC-J-58U BNC-J-62U UG-261/U Applicable Cable 3D-2V 3C-2V 3D-2V 3C-2V RG-55/U RG-58/U RG-59/U RG-62/U RG-59/U RG-62/U A 6.4 6.4 5.4 6.55 6.6 (L) 28.5 28.5 28.6 28.6 28.6 Finish Shell Ag Ni Ag Ag Ag Contact Ag Ag Ag Ag Ag (L) 17.5 P/N 15.8 38.0 Applicable Cable 5D-2V 5C-2V Finish Shell Ag Contact Ag BNC-J-5 Crimp Type Applicable Cable 2.5D-2V 2.5C-2V 1.5D-2V 1.5D-QEV RG-55/U RG-58/U Finish Shell Ag Ag Ag Contact Ag Ag Ag Hand Crimp Tool P/N CR-H-1100 CR-H-1100 CR-H-1105 A P/N BNC-J-2.5-CR 34.5 A 5.5 5.5 6.3 BNC-J-1.5V-CR BNC-J-58U-CR1 5 BNC Series Panel Jack Clamp Type 4-B www..com Unit : mm P/N 17.5 12.7 A Applicable Cable 3D-2V 3C-2V 3D-2V 3C-2V RG-55/U RG-58/U RG-55/U RG-58/U RG-55/U RG-58/U RG-55/U RG-58/U A 6.4 6.4 5.4 5.4 5.4 6.55 L 28.5 28.5 27.0 27.0 27.0 28.6 B 3.0 3.0 3.0 3.0 3.0 3.0 Finish Shell Ag Ni Ag Ni Ni Ag Contact Ag Ag Ag Ag Au Ag BNC-PJ-3 BNC-PJ-3-Ni BNC-PJ-58U BNC-PJ-58U-Ni BNC-PJ-58U-NiCAu BNC-PJ-62U 2.3 15.8 (L) 12.7 Mounting Hole 4-3.0 -0 +0.1 11.5 -0 +0.1 12.7 0.05 12.7 0.05 4-3.0 P/N 14.0 13.5 Applicable Cable 3D-2W 3C-2W 3D-2W 3C-2W Finish Shell Ag Ni Contact Ag Ag BNC-PJ-3W 2.3 15.8 (31.0) 13.5 19.0 BNC-PJ-3W-Ni-1 Mounting Hole 4-M2.6 x 0.45 14.5 -0 +0.1 13.5 0.05 13.5 0.05 4-3.2 17.5 18.2 P/N BNC-PJ-5 BNC-PJ-5D2W Applicable Cable 5D-2V 5C-2V 5D-2W 5C-2W (L) 38.0 40.6 Finish Shell Ag Ag Contact Ag Ag 2 15.77 (L) 18.2 25.3 Mounting Hole 4-3.2 -0 +0.1 11.5 -0 +0.1 18.2 0.05 18.2 0.05 6 BNC Series Panel Jack Crimp Type 4-3.0 www..com Unit : mm P/N 17.5 5.5 12.7 Applicable Cable 1.5D-2V 1.5C-2V 1.5D-2V 1.5C-2V 2.5D-2V 2.5C-2V 2.5D-2V 2.5C-2V RG-179B/U 1.5D-QEW 1.5D-QEW Finish Shell Ag Ni Ag Ni Ag Ni Ni Contact Ag Ag Ag Ag Ag Au Ag Hand Crimp Tool P/N CR-H-1100 CR-H-1100 CR-H-1100 CR-H-1100 CR-H-1100 CR-H-1100 CR-H-1100 Mounting Hole R R R R R N N BNC-PJ-1.5V-CR BNC-PJ-1.5V-CR-Ni BNC-PJ-2.5V-CR BNC-PJ-2.5V-CR-Ni 2.3 15.8 12.7 34.5 Mounting Hole R 4-3.0 -0 +0.1 12.7 0.05 11.5 -0 +0.1 BNC-PJ-179BU-CR BNC-PJ-1.5W-CR-DI BNC-PJ-1.5W-CR-Ni 12.7 0.05 Mounting Hole N 4-3.0 -0 +0.1 12.0 -0 +0.1 12.7 0.05 12.7 0.05 4-3.0 12.7 17.5 10 6 P/N BNC-PJ-1.5DW-CR1 Applicable Cable 1.5D-QEW Finish Shell Ni Contact Au Hand Crimp Tool P/N CR-H-1156 2.29 15.77 12.7 30.1 Mounting Hole 4-3.0 -0 +0.1 11.5 -0 +0.1 12.7 0.05 12.7 0.05 7 BNC Series Receptacle 4-B www..com Unit : mm P/N 1.4 12.7 B 3.1 3.1 M2.6 M2.6 Finish Shell Ag Ni Ag Ni Contact Ag Ag Ag Ag BNC-R BNC-R-Ni UG-290/U UG-290/U-Ni-1 2.3 15.8 26.3 12.7 17.5 Mounting Hole 4-3.0 +0.1 -0 9.0 +0.1 -0 12.7 0.05 12.7 12.7 0.05 P/N 4-3.0 17.5 1.1 12.7 Finish Shell Ag Ni Contact Ag Ag BNC-LR 23.4 BNC-LR-Ni 23 Mounting Hole 4-3.0 +0.1 -0 9.0 +0.1 -0 12.7 0.05 12.7 0.05 15.0 P/N 2.3 2.5 13.3 Finish Shell Ni Contact Ag Note Locating pins(4pcs):Tinlead plating Locating pins(4pcs):Ag plating Locating pins(4pcs):Tinlead plating BNC-R-PC-4 PCB Mounting Dimensions 5-1.2 +0.1 -0 0.05 BNC-R-PC-4-Ag Ni Ag BNC-R-PC-4-CAu 10.16 -0 +0.1 Ni Au 5.08 0.05 10.16 -0 +0.1 5.08 8 BNC Series Receptacle 10.16 www..com Unit : mm 15.0 10.16 P/N 23.4 Finish Shell Ni Contact Ag Note Locating pins(4pcs):Tinlead plating BNC-LR-PC-4 2.5 19.1 PCB Mounting Dimensions 5-1.2 +0.1 -0 5.08 0.05 5.08 0.05 10.16 -0 +0.1 10.16 -0 4-3.0 +0.1 P/N 1.1 12.7 Finish Shell Ag Ni Contact Ag Ag BNC-PR BNC-PR-Ni 2.3 18.0 28.5 12.7 17.5 Mounting Hole 4-3.2 +0.1 -0 9.0 +0.1 -0 12.7 0.05 12.7 0.05 9 BNC Series Bulkhead Receptacle Hex.12.7 www..com Unit : mm P/N 12.7 1.4 Finish Shell Ag Ni Ni Contact Ag Ag Au BNC-RB2 BNC-RB2-Ni BNC-RB2-NiCAu 1.5 12.6 26.3 Panel Thickness:1.2 3.5 Mounting Hole 11.3 -0 +0.1 Hex.12.7 10.3 P/N 12.7 1.4 Finish Shell Ag Ni Contact Ag Ag UG-625/U UG-625/U-Ni 1.5 12.6 26.3 Panel Thickness:1.2 3.5 Mounting Hole 11.3 -0 +0.1 Hex.12.7 10.3 P/N 14.3 1.1 Finish Shell Ag Ni Contact Ag Ag UG-604/U UG-604/U-Ni-1 1.0 13.7 26.3 Panel Thickness:0.7 2.4 Mounting Hole 9.6 -0 +0.1 8.5 -0 +0.1 10 BNC Series Bulkhead Receptacle Hex.12.7 www..com Unit : mm P/N 14.5 1.3 Finish Shell Ag Ni Contact Ag Ag Note Moisture-Proof Type with flange and O ring Moisture-Proof Type with flange and O ring UG-657/U UG-657/U-Ni 2.44 15.1 33 Panel Thickness:2.2 6.0 Mounting Hole 9.92 +0.1 -0 8.8 -0 +0.1 Hex.12.7 P/N 12.7 1.6 Finish Shell Ag Ni Contact Ag Au UG-1094/U UG-1094/U-D1 1.2 11.9 27 Panel Thickness:2.2 3.1 Mounting Hole 9.6 +0.1 -0 Hex.12.7 8.8 -0 +0.1 P/N 14.5 1.3 Finish Shell Ag Ni Contact Ag Ag Note Moisture-Proof Type with flange and O ring Moisture-Proof Type with flange and O ring BNC-RBP1 BNC-RBP1-Ni 2.5 15.2 32.6 Panel Thickness:2.6 6.4 Mounting Hole 9.6 -0 +0.1 8.5 -0 +0.1 11 BNC Series Bulkhead Receptacle Hex.12.7 www..com Unit : mm P/N 14.4 14.7 1.1 Finish Shell Ag Ni Contact Ag Ag Note with flange and O ring with flange and O ring BNC-RB BNC-RB-Ni 2.3 17.4 33 Panel Thickness:2.2 7.0 Mounting Hole 9.6 -0 +0.1 8.5 -0 +0.1 12 BNC Series Cap A www..com Unit : mm P/N BNC-C BNC-C-Ni 57 Finish Ag Ni Ag Ni Ag Ni A 17.9 17.9 18.5 18.5 17.8 17.8 CW-123A/U CW-123A/U-Ni BNC-CS BNC-CS-Ni 3. 7 P/N BNC-JC 20.5 Finish Ag Ni BNC-JC-Ni 90 13 |
Price & Availability of UG1094
 |
|
|
|
|
All Rights Reserved © IC-ON-LINE 2003 - 2022 |
| [Add Bookmark] [Contact Us] [Link exchange] [Privacy policy] |
|
Mirror Sites : [www.datasheet.hk]
[www.maxim4u.com] [www.ic-on-line.cn]
[www.ic-on-line.com] [www.ic-on-line.net]
[www.alldatasheet.com.cn]
[www.gdcy.com]
[www.gdcy.net] |