 |
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
| Datasheet File OCR Text: |
| December 2003 For General-Purpose Remote Controllers 6rixs Se e 3.5 to 4.5 MHz ceramic oscillation 20 SSOP, 56 keys PD69A PD68B PD67B ROM: 4074 x 10 bits, RAM: 128 x 4 bits High-speed instruction execution can be selected (mask option). VDD = 2.0 to 3.6 V, 1.8 to 3.6 V (mask option) 20 SSOP, 56 keys ROM: 2026 x 10 bits, RAM: 32 x 4 bits Low-voltage operation version of PD68A. VDD = 1.65 to 3.6 V 20 SSOP, 56 keys ROM: 1002 x 10 bits, RAM: 32 x 4 bits Low-voltage operation version of PD67A. VDD = 1.65 to 3.6 V 2 Pamphlet U14372EJ5V0PF For Preset Remote Controllers 2s 17erie4x S PD17246 PD17245 30 SSOP ROM: 32 KB, RAM: 447 x 4 bits 30 SSOP ROM: 24 KB, RAM: 447 x 4 bits PD17244 PD17243 30 SSOP ROM: 20 KB, RAM: 447 x 4 bits 30 SSOP ROM: 16 KB, RAM: 447 x 4 bits PD17242 PD17241 30 SSOP ROM: 12 KB, RAM: 447 x 4 bits 30 SSOP ROM: 8 KB, RAM: 447 x 4 bits PD17240 30 SSOP ROM: 4 KB, RAM: 447 x 4 bits 78u9s0ri8s8 Sbee PD789088 PD789086 30 SSOP ROM: 32 KB, RAM: 576 bytes 30 SSOP ROM: 16 KB, RAM: 384 bytes Pamphlet U14372EJ5V0PF 3 For LCD Remote Controllers 8b e e 7Su9s3ri2s7 PD789327 52 LQFP ROM: 24 KB, RAM: 512 bytes PD789326 52 LQFP ROM: 16 KB, RAM: 512 bytes PD789324 52 LQFP ROM: 8 KB, RAM: 256 bytes PD789322 52 LQFP ROM: 4 KB, RAM: 256 bytes 8b e e 7Su9s4ri6s7 PD789467 52 LQFP ROM: 24 KB, RAM: 512 bytes PD789466 52 LQFP ROM: 16 KB, RAM: 512 bytes PD789464 52 LQFP ROM: 8 KB, RAM: 256 bytes PD789462 52 LQFP ROM: 4 KB, RAM: 256 bytes 4 Pamphlet U14372EJ5V0PF PD6x Series For infrared remote control transmitters/ general-purpose applications PD68B 2026 x 10 bits Mask ROM 32 x 4 bits PD69A 4074 x 10 bits One-time PROM 128 x 4 bits PD6P9 Part Number Major applications ROM size PD67B 1002 x 10 bits Remote controllers for AV and household electric appliances RAM size Number of supported keys Operation clock frequency Instruction execution time Modulation carrier frequency Timer POC circuit RAM retention detector Power supply voltage Package Development tools 32 (standard)/56 (when using key expansion pin) 3.5 to 4.5 MHz (ceramic oscillation) 16 s (@ 4 MHz operation) 16 s or 8 s Note 1 (@ 4 MHz operation) Each high-/low-level width can be set from 250 ns to 64 s (@ 4 MHz operation) via modulo registers 9-bit programmable timer: 1 channel On chip None 1.65 to 3.6 V 2.0 to 3.6 V or 1.8 to 3.6 V 20-pin plastic SSOP (7.62 mm (300)) Assembler On chip Note 2 2.2 to 3.6 V Notes 1. Selectable by mask option in the PD69A. Fixed in each product of the PD6P9. 2. Selectable by mask option Pamphlet U14372EJ5V0PF 5 PD1724x Series For preset remote controllers/ small-scale general-purpose applications PD17242 PD17243 PD17244 PD17245 PD17246 PD17P246 Part Number Major applications ROM size PD17240 PD17241 Preset remote controllers, toys, portable systems 2048 x 16 bits 4096 x 16 bits 6144 x 16 bits 8192 x 16 bits 10240 x 16 bits 12288 x 16 bits Mask ROM 447 x 4 bits On chip Input: 5, I/O: 19 1 Basic interval timer/watchdog timer: 1 channel Mask option On chip High-speed mode: 4 s/Normal mode: 8 s (@ 4 MHz operation) 2.0 to 3.6 V 30-pin plastic SSOP (7.62 mm (300)) Assembler, device file, integrated debugger, in-circuit emulator 2.2 to 3.6 V On chip 16384 x 16 bits One-time PROM RAM size Carrier generator for infrared remote controller I/O ports External interrupt Timer Low voltage detector RAM retention detector Instruction execution time Power supply voltage Package Development tools 6 Pamphlet U14372EJ5V0PF PD789088 Subseries For preset remote controllers/ small-scale general-purpose applications PD789088 Preset remote controllers PD78F9088 Part Number Major applications ROM size PD789086 16 KB Mask ROM 32 KB Flash memory 320 bytes 256 bytes 1.0 to 5.0 MHz (ceramic/crystal oscillation) 0.4 s/0.8 s/1.6 s (@ 5.0 MHz operation) 8 bits x 8 registers * 16-bit operations * Bit manipulation (set, reset, test) etc. 24 * 16-bit timer: 1 channel * 8-bit timer: 3 channels * Watchdog timer: 1 channel RAM size High-speed RAM Low-speed RAM 256 bytes 128 bytes Operation clock frequency Instruction execution time General-purpose registers Instruction set I/O ports Timers Timer outputs Serial interface Key return detection Vectored interrupt sources Reset Maskable Nonmaskable 1 UART/3-wire serial I/O mode: 1 channel 8 pins Internal: 8, External: 2 Internal: 1 * Reset by RESET signal input * Internal reset by watchdog timer * Reset via power-on-clear circuit Power supply voltage Package Development tools 1.8 to 5.5 V 30-pin plastic SSOP (7.62 mm (300)) Assembler, C compiler, device file, integrated debugger, system simulator, in-circuit emulator, automatic program generation tool Pamphlet U14372EJ5V0PF 7 PD789327 Subseries For infrared remote control transmitters/ LCD drive PD789324 PD789326 PD789327 PD78F9328 Part Number Major applications ROM size PD789322 Remote controllers for AV and air conditioners 4 KB 8 KB Mask ROM 16 KB 24 KB 32 KB Flash memory 512 bytes 24 x 4 bits * 1.0 to 5.0 MHz (Main system clock: Ceramic/crystal oscillation) * 32.768 kHz (Subsystem clock) * 0.4 s/1.6 s (@ 5.0 MHz operation with main system clock) * 122 s (@ 32.768 kHz operation with subsystem clock) 8 bits x 8 registers * 16-bit operations * Bit manipulation (set, reset, test) etc. RAM size High-speed RAM LCD display RAM frequency 256 bytes Operation clock Instruction execution time General-purpose registers Instruction set I/O ports Timers 21 * 8-bit timer: 2 channels * Watch timer: 1 channel * Watchdog timer: 1 channel Timer outputs POC circuit Serial interface LCD controller/driver Mask option 1 On chip 3-wire serial I/O mode: 1 channel * Segment signal outputs: 24 * Common signal outputs: 4 Key return detection Vectored interrupt sources Reset Maskable Nonmaskable 4 pins Internal: 6, External: 2 Internal: 1 * Reset by RESET signal input * Internal reset by watchdog timer * Reset via power-on-clear circuit Power supply voltage Package Development tools 1.8 to 5.5 V 52-pin plastic LQFP (10 x 10) Assembler, C compiler, device file, integrated debugger, system simulator, in-circuit emulator 8 Pamphlet U14372EJ5V0PF PD789467 Subseries For infrared remote control transmitters/ LCD drive PD789464 PD789466 PD789467 PD78F9468 Part Number Major applications ROM size PD789462 Remote controllers for AV and air conditioners 4 KB 8 KB Mask ROM 16 KB 24 KB 32 KB Flash memory 512 bytes 23 x 4 bits * 1.0 to 5.0 MHz (Main system clock: Ceramic/crystal oscillation) * 32.768 kHz (Subsystem clock) * 0.4 s/1.6 s (@ 5.0 MHz operation with main system clock) * 122 s (@ 32.768 kHz operation with subsystem clock) 8 bits x 8 registers * 16-bit operations * Bit manipulation (set, reset, test) etc. RAM size High-speed RAM LCD display RAM 256 bytes Operation clock frequency Instruction execution time General-purpose registers Instruction set I/O ports Timers 18 * 8-bit timer: 2 channels * Watch timer: 1 channel * Watchdog timer: 1 channel Timer outputs POC circuit A/D converter LCD controller/driver Mask option 1 On chip 8-bit resolution x 1 channel * Segment signal outputs: 23 * Common signal outputs: 4 * On-chip booster Key return detection Vectored interrupt sources Reset Maskable Nonmaskable 4 pins Internal: 6, External: 2 Internal: 1 * Reset by RESET signal input * Internal reset by watchdog timer * Reset via power-on-clear circuit Power supply voltage Package Development tools 1.8 to 5.5 V 52-pin plastic LQFP (10 x 10) Assembler, C compiler, device file, integrated debugger, system simulator, in-circuit emulator Pamphlet U14372EJ5V0PF 9 Product Lineup 30-pin SSOP PD789088 PD789086 Functions deleted 30-pin SSOP PD179088Note 30-pin SSOP PD17246 PD17245 PD17244 PD17243 PD17242 PD17241 PD17240 PD179086Note PD179835Note Subseries PD179478Note Subseries PD179306Note Subseries PD179327Note Subseries 2304 segments 144-pin LQFP 112 segments 80-pin QFP 96 segments 64-pin TQFP PD789327 Subseries PD789467 Subseries 96 segments 52-pin LQFP Functions deleted 92 segments 52-pin LQFP 96 segments 52-pin LQFP Note These devices are under development, so the parameters for these devices may change or NEC Electronics may withdraw these devices prior to production. 10 Pamphlet U14372EJ5V0PF Application For remote control transmitter (56 keys; mode selection switch supported) PD6x Series VDD Mode select switch KI/O6 KI/O7 S0 + S1/LED REM VDD XOUT XIN Note 1 KI/O5 KI/O4 KI/O3 KI/O2 KI/O1 KI/O0 KI3 KI2 KI1 KI0 Key matrix 8 x 7 = 56 keys Note 1 GND S2 Note 2 Notes 1. When incorporation of a capacitor for oscillation has not been specified by a mask option. 2. Set so that STOP mode release is enabled. Pamphlet U14372EJ5V0PF 11 Application For remote control transmitter (72 keys supported) PD1724x Series P0D2 P0D3 P1B0/INT + 1 2 3 4 5 6 7 8 9 10 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16 P1A2 P0D1 P0D0 P0C3 P0C2 P0C1 P0C0 P0B3 P0B2 P0B1 P0B0 P0A3 P0A2 P0A1 P0A0 P0E0 P0E1 P0E2 P0E3 REM VDD XOUT 3V Jog shuttle XIN 11 4 MHz GND 12 RESET 13 P1A0 14 P1A1 15 = Key matrix 8 x 9 = 72 keys 12 Pamphlet U14372EJ5V0PF Application For remote control transmitter (72 keys supported) PD789088 Subseries P40/KR00 P41/KR01 P42/KR02 P43/KR03 P44/KR04 P45/KR05 P46/KR06/INTP0 P47/KR07/INTP1 P00 P01 P02 P03 P04 P05 P06 = Key matrix 8 x 9 = 72 keys 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16 P27 P26 P25 P24/CPT20 P23/TO600 VDD VSS X1 X2 RESET IC (VPP) P22/SI20/RxD20 P21/SO20/TxD20 P20/SCK20/ASCK20 P07 + EEPROM CS DO DI SK Pamphlet U14372EJ5V0PF 13 Development Tools The PD6x Series is developed in the following environment. Development environment: PC-9800 series, IBM PC/ATTM compatibles Assembler (AS6133) RS-232-C cable AC adapter Probe Main board Keyboard Host machine PC-9800 series IBM PC/AT compatible Emulator (EB-69, EB-69A) Target system Remarks 1. The RS-232-C cable, probe, and AC adapter are sold separately. Remark s 2. EB-69 and EB-69A are manufactured by Naito Densei Machida Mfg. Co., Ltd. Software Features Assembler (AS6133) Absolute assembler for PD6x Series. Output load module file to serve as EB-69 and EB-69A input and diagnostic lists. Hardware Features Emulator (EB-69, EB-69A) Operations such as key input and infrared LED light emission confirmation can be performed using the keyboard unit provided. Connection to target is possible using the probe (sold separately). Event functions including step execution and program execution break are included. Guard functions including stack overflow and coverage break are included. Remark EB-69 and EB-69A are manufactured by Naito Densei Machida Mfg. Co., Ltd. 14 Pamphlet U14372EJ5V0PF Development Tools The PD1724x Series is developed in the following environment. Development environment: PC-9800 series, IBM PC/AT compatibles Emulation probe Conversion adapter EM board (EM-17246) Target system RS-232-C cable In-circuit emulator (IE-17K) Host machine PC-9800 series IBM PC/AT compatible Assembler package RA17K PROM programmer SIMPLEHOSTTM Device file Software RA17K (relocatable assembler package) Device file: Available for each product SIMPLEHOST: Compatible with RA17K Hardware IE-17K or IE-17K- ET (in-circuit emulator) EM-17246 (EM board manufactured by Naito Densei Machida Mfg. Co., Ltd.) Emulation probe Conversion adapter PC-9800 series or IBM PC/AT compatible PROM programmer (for writing to one-time PROM such as AF-9706, AF-9708, AF-9709 manufactured by Ando Electric Co., Ltd.) Programmer adapter (PA-17P236 manufactured by NEC Electronics) Pamphlet U14372EJ5V0PF 15 Development Tools The PD789088, 789327, and 789467 Subseries are developed in the following environment. Development environment: PC-9800 series, IBM PC/AT compatibles Emulation board In-circuit emulator (IE-78K0S-NS) AC adapter Emulation probe For PC-9800 series PC interface board Conversion socket/ adapter For PC/AT compatible machines Host machine PC-9800 series IBM PC/AT compatible Target system Printer cable or RS-232-C cable Flash memory programmer (PG-FP3, PG-FP4) (Connection) Assembler package RA78K0S C compiler package CC78K0S C compiler library source file CC78K0S-L Integrated debugger ID78K0S-NS System simulator SM78K0S Device file 16 Pamphlet U14372EJ5V0PF Development Tools PD789088, 789327, and 789467 Subseries Software RA78K0S (relocatable assembler package) CC78K0S (C compiler package) CC78K0S-L (C compiler library source file) ID78K0S-NS (integrated debugger) SM78K0S (system simulator) Device file: Available for each product Hardware IE -78K0S-NS (in-circuit emulator) IE-70000-MC-PS-B (AC adapter) IE-70000-98-IF-C/IE-70000-PC-IF-C/IE-70000-PCI-IF-A/IE-70000-CD-IF-A (PC interface board) Emulation board: Available for each product Emulation probe Conversion socket/adapter PC-9800 series or IBM PC/AT compatible Flash memory programmer (PG-FP3/PG-FP4, FL-PR3/FL-PR4 manufactured by Naito Densei Machida Mfg. Co., Ltd.) Flash memory writing adapter (manufactured by Naito Densei Machida Mfg. Co., Ltd.) Pamphlet U14372EJ5V0PF 17 Automatic Program Generation Tool The following shows an automatic program generation tool for the PD789088 Subseries. This tool is used to automatically generate the program of the PD789088 Subseries microcontrollers for preset remote controllers. The features and functions are as follows. Features This tool includes the TV/VCR remote controller output format and code information used in many parts of the world. By selecting and setting the specifications of the remote controller on the Windows user interface, tricky program development can be completed quickly and easily. This tool realizes a troublesome program development to complete in short time. Functions The major items that can be selected or set are as follows. * Selection of machinery category/manufacturer/output format * Selection of keys to be used * Setting of key allocation on key matrix Operating Environment Host machine: PC-9800 series or IBM PC/AT compatible OS: WindowsTM 98, Windows Me, Windows 2000, Windows XP (Professional, Home Edition) CPU: For Windows 98, Windows Me: PentiumTM 150 MHz or higher is recommended For Windows 2000, Windows XP (Professional, Home Edition): IntelTM Pentium/CeleronTM series, AMD K6/Athlon/Duron Family, or compatible processor with a clock rate of 300 MHz or higher is recommended Memory: For Windows 98, Windows Me: 32 MB min. For Windows 2000, Windows XP (Professional, Home Edition): 128 MB min. Pamphlet U14372EJ5V0PF 18 Homepage Please feel free to visit our Microcomputer homepage for more information. http://www.necel.com/micro/index_e.html Pamphlet U14372EJ5V0PF 19 Memo 20 Pamphlet U14372EJ5V0PF Memo Pamphlet U14372EJ5V0PF 21 Memo 22 Pamphlet U14372EJ5V0PF SIMPLEHOST is a trademark of NEC Electronics Corporation. PC/AT is a trademark of International Business Machines Corporation. Windows is either a registered trademark or a trademark of Microsoft Corporation in the United States and/or other countries. Intel, Pentium, and Celeron are trademarks of Intel Corporation. Other names, part numbers, etc., described in this document are trademarks or registered trademarks of each company. These commodities, technology or software, must be exported in accordance with the export administration regulations of the exporting country. Diversion contrary to the law of that country is prohibited. * The information in this document is current as of September, 2003. The information is subject to change without notice. For actual design-in, refer to the latest publications of NEC Electronics data sheets or data books, etc., for the most up-to-date specifications of NEC Electronics products. Not all products and/or types are available in every country. Please check with an NEC Electronics sales representative for availability and additional information. * No part of this document may be copied or reproduced in any form or by any means without the prior written consent of NEC Electronics. NEC Electronics assumes no responsibility for any errors that may appear in this document. * NEC Electronics does not assume any liability for infringement of patents, copyrights or other intellectual property rights of third parties by or arising from the use of NEC Electronics products listed in this document or any other liability arising from the use of such products. No license, express, implied or otherwise, is granted under any patents, copyrights or other intellectual property rights of NEC Electronics or others. * Descriptions of circuits, software and other related information in this document are provided for illustrative purposes in semiconductor product operation and application examples. The incorporation of these circuits, software and information in the design of a customer's equipment shall be done under the full responsibility of the customer. NEC Electronics assumes no responsibility for any losses incurred by customers or third parties arising from the use of these circuits, software and information. * While NEC Electronics endeavors to enhance the quality, reliability and safety of NEC Electronics products, customers agree and acknowledge that the possibility of defects thereof cannot be eliminated entirely. To minimize risks of damage to property or injury (including death) to persons arising from defects in NEC Electronics products, customers must incorporate sufficient safety measures in their design, such as redundancy, fire-containment and anti-failure features. * NEC Electronics products are classified into the following three quality grades: "Standard", "Special" and "Specific". The "Specific" quality grade applies only to NEC Electronics products developed based on a customerdesignated "quality assurance program" for a specific application. The recommended applications of an NEC Electronics product depend on its quality grade, as indicated below. Customers must check the quality grade of each NEC Electronics product before using it in a particular application. "Standard": Computers, office equipment, communications equipment, test and measurement equipment, audio and visual equipment, home electronic appliances, machine tools, personal electronic equipment and industrial robots. "Special": Transportation equipment (automobiles, trains, ships, etc.), traffic control systems, anti-disaster systems, anti-crime systems, safety equipment and medical equipment (not specifically designed for life support). "Specific": Aircraft, aerospace equipment, submersible repeaters, nuclear reactor control systems, life support systems and medical equipment for life support, etc. The quality grade of NEC Electronics products is "Standard" unless otherwise expressly specified in NEC Electronics data sheets or data books, etc. If customers wish to use NEC Electronics products in applications not intended by NEC Electronics, they must contact an NEC Electronics sales representative in advance to determine NEC Electronics' willingness to support a given application. (Note) (1) "NEC Electronics" as used in this statement means NEC Electronics Corporation and also includes its majority-owned subsidiaries. (2) "NEC Electronics products" means any product developed or manufactured by or for NEC Electronics (as defined above). M8E 02. 11-1 Pamphlet U14372EJ5V0PF 23 For further information, please contact: NEC Electronics Corporation 1753, Shimonumabe, Nakahara-ku, Kawasaki, Kanagawa 211-8668, Japan Tel: 044-435-5111 http://www.necel.com/ [North America] NEC Electronics America, Inc. 2880 Scott Blvd. Santa Clara, CA 95050-2554, U.S.A. Tel: 408-588-6000 800-366-9782 http://www.necelam.com/ [Europe] NEC Electronics (Europe) GmbH Oberrather Str. 4 40472 Dusseldorf, Germany Tel: 0211-6503-01 http://www.ee.nec.de/ Sucursal en Espana Juan Esplandiu, 15 28007 Madrid, Spain Tel: 091-504-2787 Succursale Francaise 9, rue Paul Dautier, B.P. 52 78142 Velizy-Villacoublay Cedex France Tel: 01-3067-5800 Filiale Italiana Via Fabio Filzi, 25/A 20124 Milano, Italy Tel: 02-667541 Branch The Netherlands Boschdijk 187a 5612 HB Eindhoven The Netherlands Tel: 040-2445845 Tyskland Filial P.O. Box 134 18322 Taeby, Sweden Tel: 08-6380820 United Kingdom Branch Cygnus House, Sunrise Parkway Linford Wood, Milton Keynes MK14 6NP, U.K. Tel: 01908-691-133 [Asia & Oceania] NEC Electronics Hong Kong Limited 12/F., Cityplaza 4, 12 Taikoo Wan Road, Hong Kong Tel: 2886-9318 Seoul Branch 11F., Samik Lavied'or Bldg., 720-2, Yeoksam-Dong, Kangnam-Ku, Seoul, 135-080, Korea Tel: 02-558-3737 NEC Electronics Shanghai, Ltd. 7th Floor, HSBC Tower, 101Yin Cheng East Road, Pudong New Area, Shanghai P.R. China P.C:200120 Tel: 021-6841-1138 NEC Electronics Taiwan Ltd. 7F, No. 363 Fu Shing North Road Taipei, Taiwan, R. O. C. Tel: 02-2719-2377 NEC Electronics Singapore Pte. Ltd. 238A Thomson Road, #12-08 Novena Square, Singapore 307684 Tel: 6253-8311 G03.4 Document No. U14372EJ5V0PF00 (5th edition) Date Published December 2003 N CP(K) (c) NEC Electronics Corporation 1999 Printed in Japan |
Price & Availability of UPD68
 |
|
|
|
|
All Rights Reserved © IC-ON-LINE 2003 - 2022 |
| [Add Bookmark] [Contact Us] [Link exchange] [Privacy policy] |
|
Mirror Sites : [www.datasheet.hk]
[www.maxim4u.com] [www.ic-on-line.cn]
[www.ic-on-line.com] [www.ic-on-line.net]
[www.alldatasheet.com.cn]
[www.gdcy.com]
[www.gdcy.net] |