 |
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
| Datasheet File OCR Text: |
| heet4U.com AM1 (MN101) Series AM1 (MN101) Series The AM1 Series of 8-bit microcomputers is the realization of developments in C programming. Because of the 8-bit architecture, which allows half-byte instruction sets and offers other advantages, assembler ROM code size can be reduced. They are compact and consume little power, but feature a shortest instruction processing time of 63 ns (5 V). They can be used in a wide variety of applications where cost performance is a demand. Features q Efficiency of C-based ROM code: Assembler rate 1 or less q High-speed instruction processing: 63 ns (32 MHz) q Linear address space: 1 MB q Identical architecture for 32- and 16-bit microcomputers q Option functions Hardware task switching (Max. 4 task) 16-bit multiplication ROM collection s Application www..com MN101C28A , MN101C28C , MN101C28D , MN101C28F , MN101C28L Type ROM (x 8-bit) x External memory can be expanded MN101C28A 32 K MN101C28C 48 K MN101C28D 64 K MN101C28F 96 K MN101C28L 96 K RAM (x 8-bit) x External memory can be expanded 1.5 K 2K 2K 4K 10 K Package (Conventional Package) Minimum Instruction Execution Time [All lead-free] LQFP080-P-1414A, TQFP080-P-1212D, QFP084-P-1818E (TQFP080-P-1212C) 0.10 s (at 4.5 V to 5.5 V, 20 MHz) 0.238 s (at 2.6 V to 5.5 V, 8.39 MHz) 0.333 s (at 2.3 V to 5.5 V, 6 MHz) 1.00 s (at 2.0 V to 5.5 V, 2 MHz)* 125 s (at 2.0 V to 5.5 V, 32.768 kHz)* * The lower limit for operation guarantee for EPROM built-in type is 2.3 V. LQFP080-P-1414A *Lead-free Interrupts * RESET * Watchdog * External 0 * External 1 * External 2 * External 3 * External 4 * Timer 0 * Timer 1 * Timer 2 * Timer 3 * Timer 4 * Timer 5 * Time base * Serial 0 * Serial 1 * Serial 2 * Automatic transfer finish * A/D conversion finish Timer counter 0 : 8-bit x 1 (square-wave/8-bit PWM output, event count, generation of remote control carrier) Clock source ********************* 1/1, 1/4 of system clock frequency; 1/1 of OSC oscillation clock frequency; external clock input Interrupt source **************** coincidence with compare register 0 Timer counter 1 : 8-bit x 1 (square-wave output, event count, synchronous output event) Clock source ********************* 1/16, 1/64 of system clock frequency; 1/1 of XI oscillation clock frequency; external clock input Interrupt source **************** coincidence with compare register 1 Timer counter 0, 1 can be cascade-connected. Timer counter 2 : 8-bit x 1 (square-wave/8-bit PWM output, event count, synchronous output event) Clock source ********************* 1/1, 1/4 of system clock frequency; 1/1 of XI oscillation clock frequency; external clock input Interrupt source **************** coincidence with compare register 2 Timer counter 3 : 8-bit x 1 (square-wave output, event count, generation of remote control carrier, serial 0 baud rate timer) Clock source ********************* 1/4, 1/16 of system clock frequency; 1/1 of OSC oscillation clock frequency; external clock input Interrupt source **************** coincidence with compare register 3 Timer counter 2, 3 can be cascade-connected. Timer counter 4 : 16-bit x 1 (square-wave/16-bit PWM output, event count, synchronous output event, input capture) Clock source ********************* 1/4, 1/16 of system clock frequency; 1/1 of OSC oscillation clock frequency; external clock input Interrupt source **************** coincidence with compare register 4 Time base timer (one-minute count setting, independently operable 8-bit timer counter 5) Clock source ********************* 1/4 of system clock frequency; 1/1, 1/8192 of OSC oscillation clock frequency; 1/1, 1/8192 of XI oscillation clock frequency Interrupt source **************** coincidence with compare register 5; 1/8192 prescaler overflow Watchdog timer Interrupt source **************** 1/65536, 1/262144, 1/1048576 of system clock frequency (ROM option) MAD00006EEM Timer Counter 12 www..com MN101C28A , MN101C28C , MN101C28D MN101C28F , MN101C28L Serial Interface Serial 0 : synchronous type/simple UART (half-duplex) x 1 Clock source ********************* 1/2, 1/4, 1/16 of system clock frequency; output of timer counter 3 Serial 1 : synchronous type x 1 Clock source ********************* 1/2, 1/8, 1/64 of system clock frequency; output of timer counter 3 Serial 2 : synchronous type/single-master I 2C x 1 Clock source ********************* 1/4, 1/8, 1/16, 1/32 of system clock frequency; 1/4 of timer counter 0 frequency I/O Pins A/D Inputs Special Ports I/O Input 57 13 * Common use * Specified pull-up resistor available * Input/output selectable (bit unit) * Common use * Specified pull-up resistor available 10-Bit x 8-ch. (with S/H) Buzzer output, remote control carrier signal output, high-current drive port Electrical Characteristics Supply current Limit Parameter Symbol IDD1 Operating supply current IDD2 Supply current at HALT IDD3 fx = 32.768 kHz, VDD = 3 V, Ta = 85C VDD = 5 V, Ta = 25C Supply current at STOP IDD4 VDD = 5 V, Ta = -40C to +85C 20 1 30 fx = 32.768 kHz, VDD = 3 V fx = 32.768 kHz, VDD = 3 V, Ta = 25C 40 4 120 8 Condition min fosc = 20 MHz, VDD = 5 V typ 25 max 50 mA A A A A A Unit See the next page for pin assignment and support tool. MAD00006EEM 13 www..com Pin Assignment P37,DKDMA P35,LDDMA P36,STDMA ( P37,NDKDMA 45 ) : Conventional Package P35,NLDDMA 43 P47,KEY7 P46,KEY6 P45,KEY5 P44,KEY4 P43,KEY3 P42,KEY2 P41,KEY1 P40,KEY0 P54,A17 P53,A16 P50,WE P51,RE P52,CS P63,A3 P62,A2 P61,A1 P60,A0 63 62 61 60 59 58 57 56 55 54 53 52 51 50 49 48 47 46 60 59 58 57 56 55 54 53 52 51 50 49 48 47 46 45 44 43 42 P64,A4 P65,A5 P66,A6 P67,A7 SDO0,P70,A8 SDO1,P71,A9 SDO2,P72,A10 SDO3,P73,A11 SDO4,P74,A12 SDO5,P75,A13 SDO6,P76,A14 SDO7,P77,A15 P87,LED7,D7 P86,LED6,D6 P85,LED5,D5 P84,LED4,D4 P83,LED3,D3 P82,LED2,D2 P81,LED1,D1 P80,LED0,D0 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 10 11 12 13 14 15 16 17 18 19 1 2 3 4 5 6 7 8 9 41 40 39 38 37 36 35 34 BT,P34 BR,P33 SBT2,P32 SBI2,P31 SBO2,P30 IRQ4,P24 IRQ3,P23 IRQ2,P22 SENS,IRQ1,P21 IRQ0,P20 TM4IO,P14 TM3IO,P13 TM2IO,P12 TM1IO,P11 RMOUT,TM0IO,P10 RST,P27 DK,BUZZER,P06 SBT1,P05 SBI1,P04 SBO1,P03 P64,A4 P65,A5 P66,A6 P67,A7 SDO0,P70,A8 SDO1,P71,A9 SDO2,P72,A10 SDO3,P73,A11 SDO4,P74,A12 SDO5,P75,A13 SDO6,P76,A14 SDO7,P77,A15 N.C. P87,LED7,D7 P86,LED6,D6 P85,LED5,D5 P84,LED4,D4 P83,LED3,D3 P82,LED2,D2 P81,LED1,D1 P80,LED0,D0 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 10 11 12 13 14 15 16 17 18 19 20 1 2 3 4 5 6 7 8 9 44 P36,NSTDMA P47,KEY7 P46,KEY6 P45,KEY5 P44,KEY4 P43,KEY3 P42,KEY2 P41,KEY1 P40,KEY0 P50,NWE P51,NRE P52,NCS P54,A17 P53,A16 P63,A3 P62,A2 P61,A1 P60,A0 N.C. 42 41 40 39 38 37 36 35 NBT,P34 NBR,P33 SBT2,P32 SBI2,P31 SBO2,P30IRQ4,P24 IRQ4,P24 IRQ3,P23 IRQ2,P22 SENS,IRQ1,P21 IRQ0,P20 N.C. TM4IO,P14 TM3IO,P13 TM2IO,P12 TM1IO,P11 RMOUT,TM0IO,P10 NRST,P27 NDK,BUZZER,P06 SBT1,P05 SBI1,P04 SBO1,P03 MN101C28A MN101C28C MN101C28D MN101C28F MN101C28L 33 32 31 30 29 28 27 26 25 24 23 22 21 20 MN101C28A MN101C28C MN101C28D 34 33 32 31 30 29 28 27 26 25 24 23 22 21 XI VDD OSC2 OSC1 VSS XO AN0,PA0 AN1,PA1 AN2,PA2 AN3,PA3 AN4,PA4 AN5,PA5 AN6,PA6 AN7,PA7 MMOD VREF+ VREF- TXD,SBO0,P00 RXD,SBI0,P01 SBT0,P02 RXD,SBI0,P01 LQFP080-P-1414A *Lead-free TQFP080-P-1212D *Lead-free [MN101C28A/28C/28D] (TQFP080-P-1212C) QFP084-P-1818E *Lead-free Support Tool In-circuit Emulator PX-ICE101C/D+PX-PRB101C28-TQFP080-P-1212 PX-ICE101C/D+PX-PRB101C28-QFP084-P-1818E PX-ICE101C/D+PX-PRB101C28-LQFP080-P-1414A Type MN101CP28DBF , MN101CP28DAL , MN101CP28DHT , MN101CP28LAL ROM (x 8-bit) RAM (x 8-bit) Minimum instruction execution time 64 K / 64 K / 64 K / 96 K 2 K / 2 K / 2 K / 10 K 0.10 s (at 4.5 V to 5.5 V, 20 MHz) 0.238 s (at 2.6 V to 5.5 V, 8.39 MHz) 0.333 s (at 2.3 V to 5.5 V, 6 MHz) Package (Conventional Package) [All lead-free] LQFP080-P-1414A, TQFP080-P-1212D, QFP084-P-1818E (TQFP080-P-1212C) EPROM Built-in Type TXD,SBO0,P00 SBT0,P02 XI VDD N.C. OSC2 OSC1 VSS XO AN0,PA0 AN1,PA1 AN2,PA2 AN3,PA3 AN4,PA4 AN5,PA5 AN6,PA6 AN7,PA7 MMOD VREF- VREF+ MAD00006DEM 14 www..com MN101C28A , MN101C28C , MN101C28D MN101C28F , MN101C28L MAD00006DEM 15 www..com MN101C309 , MN101C30A Type ROM (x 8-bit) x External memory can be expanded MN101C309 24 K MN101C30A 32 K RAM (x 8-bit) x External memory can be expanded 1K 1.5 K Package Minimum Instruction Execution Time LQFP064-P-1414 *Lead-fre 0.10 s (at 4.5 V to 5.5 V, 20 MHz) 0.238 s (at 2.7 V to 5.5 V, 8.39 MHz) 1.00 s (at 2.0 V to 5.5 V, 2 MHz)* 125 s (at 2.0 V to 5.5 V, 32.768 kHz)* * The lower limit for operation guarantee for EPROM built-in type is 2.7 V. * RESET * Watchdog * External 0 * External 1 * External 2 * External 3 * External 4 * Timer 0 * Timer 1 * Timer 2 * Timer 3 * Timer 4 * Timer 5 * Time Base * Serial 0 * Serial 1 * Automatic transfer finish * A/D conversion finish Timer counter 0 : 8-bit x 1 (square-wave/8-bit PWM output, event count, generation of remote control carrier) Clock source ********************* 1/1, 1/4 of system clock frequency; 1/1 of OSC oscillation clock frequency; external clock input Interrupt source ***************** coincidence with compare register 0 Timer counter 1 : 8-bit x 1 (square-wave output, event count, synchronous output event) Clock source ********************* 1/16, 1/64 of system clock frequency; 1/1 of XI oscillation clock frequency; external clock input Interrupt source ***************** coincidence with compare register 1 Timer counter 0, 1 can be cascade-connected. Timer counter 2 : 8-bit x 1 (square-wave/8-bit PWM output, event count, synchronous output event) Clock source ********************* 1/1, 1/4 of system clock frequency; 1/1 of XI oscillation clock frequency; external clock input Interrupt source ***************** coincidence with compare register 2 Timer counter 3 : 8-bit x 1 (square-wave output, event count, generation of remote control carrier, serial 0 baud rate timer) Clock source ********************* 1/4, 1/16 of system clock frequency; 1/1 of OSC oscillation clock frequency; external clock input Interrupt source ***************** coincidence with compare register 3 Timer counter 2, 3 can be cascade-connected. Timer counter 4 : 16-bit x 1 (square-wave/16-bit PWM output, event count, synchronous output event, input capture) Clock source ********************* 1/4, 1/16 of system clock frequency; 1/1 of OSC oscillation clock frequency; external clock input Interrupt source ***************** coincidence with compare register 4 Time base timer (one-minute count setting, independently operable 8-bit timer counter 5) Clock source ********************* 1/4 of system clock frequency; 1/1, 1/8192 of OSC oscillation clock frequency; 1/1, 1/8192 of XI oscillation clock frequency Interrupt source ***************** coincidence with compare register 5; 1/8192 prescaler overflow Watchdog timer Interrupt source ***************** 1/65536, 1/262144, 1/1048576 of system clock frequency (ROM option) Interrupts Timer Counter MAD00005EEM 16 www..com MN101C309 , MN101C30A Serial Interface Serial 0 : synchronous type/simple UART (half-duplex) x 1 Clock source ********************* 1/2, 1/4, 1/16 of system clock frequency; 1/2 of timer counter 3 frequency Serial 1 : synchronous type x 1 Clock source ********************* 1/2, 1/8, 1/64 of system clock frequency; output of timer counter 3 I/O Pins A/D Inputs Special Ports I/O Input 41 13 * Common use * Specified pull-up resistor available * Input/output selectable (bit unit) * Common use * Specified pull-up resistor available 10-bit x 8-ch. (with S/H) Buzzer output, remote control carrier signal output, high-current drive port Electrical Characteristics Supply current Limit Parameter Symbol IDD1 IDD2 Supply current at HALT IDD3 fx = 32.768 kHz, VDD = 3 V, Ta = 85C VDD = 5 V, Ta = 25C Supply current at STOP IDD4 VDD = 5 V, Ta = -40C to +85C 18 2 20 Condition min Operating supply current fosc = 20 MHz, VDD = 5 V fx = 32.768 kHz, VDD = 3 V fx = 32.768 kHz, VDD = 3 V, Ta = 25C typ 25 30 4 max 60 100 8 mA A A A A A Unit See the next page for pin assignment and support tool. MAD00005EEM 17 www..com Pin Assignment A11,P73,SDO3 A10,P72,SDO2 A9,P71,SDO1 A8,P70,SDO0 P54,A17 P53,A16 35 48 47 46 45 44 43 42 41 40 39 38 37 36 34 SDO4,A12,P74 SDO5,A13,P75 SDO6,A14,P76 SDO7,A15,P77 LED7,D7,P87 LED6,D6,P86 LED5,D5,P85 LED4,D4,P84 LED3,D3,P83 LED2,D2,P82 LED1,D1,P81 LED0,D0,P80 VREFAN0,PA0 AN1,PA1 AN2,PA2 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 33 P51,RE P52,CS P67,A7 P66,A6 P65,A5 P64,A4 P63,A3 P62,A2 P61,A1 P60,A0 32 31 30 29 28 27 P50,WE P24,IRQ4 P23,IRQ3 P22,IRQ2 P21,IRQ1,SENS P20,IRQ0 P14,TM4IO P13,TM3IO P12,TM2IO P11,TM1IO P10,TM0IO,RMOUT P27,RST P06,BUZZER,DK SBT1,P05 SBI1,P04 SBO1,P03 MN101C309 MN101C30A 26 25 24 23 22 21 20 19 18 10 11 12 13 14 15 XI VDD OSC2 OSC1 VSS XO AN3,PA3 AN4,PA4 AN5,PA5 AN6,PA6 AN7,PA7 MMOD VREF+ LQFP064-P-1414 *Lead-free Support Tool In-circuit Emulator EPROM Built-in Type PX-ICE101C/D+PX-PRB101C30-LQFP064-P-1414 Type ROM (x 8-bit) RAM (x 8-bit) Minimum instruction execution time MN101CP30ABL 32 K 1.5 K 0.10 s (at 4.5 V to 5.5 V, 20 MHz) 0.238s (at 2.7 V to 5.5 V, 8 MHz) Package LQFP064-P-1414 *Lead-free P00,SBO0,TXD P01,SBI0,RXD P02,SBT0 16 17 1 2 3 4 5 6 7 8 9 MAD00005EEM 18 www..com MN101C309 , MN101C30A MAD00005EEM 19 www..com MN101C425 , MN101C427 Type ROM (x 8-bit) x RAM (x 8-bit) x Package (Conventional Package) Minimum Instruction Execution Time MN101C425 8K 0.25 K MN101C427 16 K 0.5 K SDIP042-P-0600C *Lead-free, TQFP048-P-0707B *Lead-free , QFP044-P-1010F *Lead-free (SDIP042-P-0600) 0.10 s (at 4.5 V to 5.5 V, 20 MHz) 0.238 s (at 2.7 V to 5.5 V, 8.39 MHz) 0.477 s (at 2.0 V to 5.5 V, 4.19 MHz)* 125 s (at 2.0 V to 5.5 V, 32.768 kHz)* * The lower limit for operation guarantee for EPROM built-in type is 2.7 V. * RESET * Watchdog * External 0 * External 1 * External 2 * External 3 (only 48-pin package) * Timer 2 * Timer 3 * Timer 4 * Timer 5 * Time base * Serial 0 * A/D conversion finish Timer counter 2 : 8-bit x 1 (square-wave/8-bit PWM output, event count, synchronous output event) Clock source ********************* 1/1, 1/4 of system clock frequency; 1/1 of XI oscillation clock frequency (only 48pin package); external clock input Interrupt source ***************** coincidence with compare register 2 Timer counter 3 : 8-bit x 1 (square-wave output, event count, generation of remote control carrier, serial 0 baud rate timer) Clock source ********************* 1/4, 1/16 of system clock frequency; 1/1 of OSC oscillation clock frequency; external clock input Interrupt source ***************** coincidence with compare register 3 Timer counter 2, 3 can be cascade-connected. Timer counter 4 : 16-bit x 1 (square-wave/16-bit PWM output, event count, synchronous output event, input capture) Clock source ********************* 1/4, 1/16 of system clock frequency; 1/1 of OSC oscillation clock frequency; external clock input Interrupt source ***************** coincidence with compare register 4 Time base timer (one-minute count setting, independently operable 8-bit timer counter 5) Clock source ********************* 1/4 of system clock frequency; 1/1, 1/8192 of OSC oscillation clock frequency; 1/1, 1/8192 of XI oscillation clock frequency (only 48-pin package) Interrupt source ***************** coincidence with compare register 5; 1/8192 prescaler overflow Watchdog timer Interrupt source ***************** 1/65536, 1/262144, 1/1048576 of system clock frequency (ROM option) Interrupts Timer Counter Serial Interface I/O Pins I/O Input A/D Inputs Special Ports Serial 0 : synchronous type/simple UART (half-duplex) x 1 Clock source ********************* 1/2, 1/4, 1/16 of system clock frequency; output of timer counter 3 27 12 * Common use: 16 * Specified pull-up resistor available * Input/output selectable (bit unit): 26 (for 44-pin), 25 (for 42-pin) * Common use * Specified pull-up resistor available 10-bit x 8-ch. (with S/H) Buzzer output, remote control carrier signal output, high-current drive port MAD00002EEM 20 www..com MN101C425 , MN101C427 Electrical Characteristics Supply current Limit Parameter Symbol IDD1 Operating supply current IDD2 IDD3 Supply current at HALT IDD4 IDD5 Supply current at STOP IDD6 Condition min fosc = 20 MHz, VDD = 5 V fosc = 8.39 MHz, VDD = 5 V fx = 32.768 kHz, VDD = 3 V fx = 32.768 kHz, VDD = 3 V, Ta = 25C fx = 32.768 kHz, VDD = 3 V, Ta = -40C to +85C VDD = 5 V, Ta = 25C VDD = 5 V, Ta = -40C to +85C ( P63 P62 P61 P60 P22,IRQ2 P21,IRQ1 P20,IRQ0 P14,TMIO4 P13,TMIO3 P12,TMIO2 P11 Unit typ 15 6 max 40 18 100 8 18 2 20 mA mA A A A A A Pin Assignment ) : Conventional Package TXD,SBO0,P00 RXD,SBI0,P01 SBT0,P02 BUZZER,P06 RMOUT,P10 P11 TMIO2,P12 TMIO3,P13 TMIO4,P14 IRQ0,P20 IRQ1,P21 IRQ2,P22 P60 P61 P62 P63 P64 P65 P66 P67 NRST,P27 MN101C425 MN101C427 SDIP042-P-0600C *Lead-free LED3,P83 LED2,P82 LED1,P81 LED0,P80 AN0,PA0 AN1,PA1 AN2,PA2 AN3,PA3 AN4,PA4 AN5,PA5 AN6,PA6 QFP044-P-1010F *Lead-free TQFP048-P-0707B (SDIP042-P-0600) Support Tool In-circuit Emulator PX-ICE101C/D+PX-PRB101C42-QFP044-P-1010 PX-ICE101C/D+PX-PRB101C42-TQFP048-P-0707B PX-ICE101C/D+PX-PRB101C42-SDIP042-P-0600 Type ROM (x 8-bit) RAM (x 8-bit) Minimum instruction execution time MN101CP427DP , MN101CP427BF , MN101CP427HT 16 K 0.5 K 0.10 s (at 4.5 V to 5.5 V, 20 MHz) 0.238 s (at 2.7 V to 5.5 V, 8.39 MHz) Package (Conventional Package) [All lead-free] SDIP042-P-0600C, TQFP048-P-0707B, QFP044-P-1010F (SDIP042-P-0600) EPROM Built-in Type MAD00002EEM LED3,P83 LED2,P82 LED1,P81 LED0,P80 N.C. AN0,PA0 AN1,PA1 AN2,PA2 AN3,PA3 AN4,PA4 AN5,PA5 AN6,PA6 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 42 41 40 39 38 37 36 35 34 33 32 31 30 29 28 27 26 25 24 23 22 VSS OSC1 OSC2 VDD PA7,AN7 PA6,AN6 PA5,AN5 PA4,AN4 PA3,AN3 PA2,AN2 PA1,AN1 PA0,AN0 P80,LED0 P81,LED1 P82,LED2 P83,LED3 P84,LED4 P85,LED5 P86,LED6 P87,LED7 MMOD 33 32 31 30 29 28 27 26 25 24 23 1 2 3 4 5 6 7 8 9 10 11 1 2 3 4 5 6 7 8 9 10 11 12 P64 P65 P66 P67 P70 NRST,P27 MMOD LED7,P87 LED6,P86 LED5,P85 LED4,P84 34 35 36 37 38 39 40 41 42 43 44 MN101C425 MN101C427 22 21 20 19 18 17 16 15 14 13 12 P10,RMOUT P06,BUZZER P02,SBT0 P01,SBI0,RXD P00,SBO0,TXD N.C. VSS OSC1 OSC2 VDD PA7,AN7 P64 P65 P66 P67 P70 P71 NRST,P27 MMOD LED7,P87 LED6,P86 LED5,P85 LED4,P84 36 35 34 33 32 31 30 29 28 27 26 25 P63 P62 P61 P60 P23,IRQ3 P22,IRQ2 P21,IRQ1,SENS P20,IRQ0 P14,TMIO4 P13,TMIO3 P12,TMIO2 P11 37 38 39 40 41 42 43 44 45 46 47 48 MN101C425 MN101C427 24 23 22 21 20 19 18 17 16 15 14 13 P10,RMOUT P06,BUZZER P02,SBT0 P01,SBI0,RXD P00,SBO0,TXD XO XI VSS OSC1 OSC2 VDD PA7,AN7 *Lead-free 21 www..com MN101C457 Type ROM (x 8-bit) x RAM (x 8-bit) x Package Minimum Instruction Execution Time Interrupts Timer Counter MN101C457 16 K 0.5 K QFP044-P-1010F *Lead-free 0.10 s (at 4.5 V to 5.5 V, 20 MHz) 0.238 s (at 2.7 V to 5.5 V, 8.39 MHz) 0.477 s (at 2.0 V to 5.5 V, 4.19 MHz) * RESET * Watchdog * External 0 * External 1 * External 2 * Timer 2 * Timer 3 * Timer 4 * Timer 5 * Time base * Serial 0 * A/D conversion finish Timer counter 2 : 8-bit x 1 (square-wave/8-bit PWM output, event count, synchronous output event) Clock source ********************* 1/1, 1/4 of system clock frequency; external clock input Interrupt source ***************** coincidence with compare register 2 Timer counter 3 : 8-bit x 1 (square-wave output, event count, generation of remote control carrier, serial 0 baud rate timer) Clock source ********************* 1/4, 1/16 of system clock frequency; 1/1 of OSC oscillation clock frequency; external clock input Interrupt source ***************** coincidence with compare register 3 Timer counter 2, 3 can be cascade-connected. Timer counter 4 : 16-bit x 1 (square-wave/16-bit PWM output, event count, synchronous output event, input capture) Clock source ********************* 1/4, 1/16 of system clock frequency; 1/1 of OSC oscillation clock frequency; external clock input Interrupt source ***************** coincidence with compare register 4 Time base timer (one-minute count setting, independently operable 8-bit timer counter 5) Clock source ********************* 1/4 of system clock frequency; 1/1, 1/8192 of OSC oscillation clock frequency Interrupt source ***************** coincidence with compare register 5; 1/8192 prescaler overflow Watchdog timer Interrupt source ***************** 1/65536, 1/262144, 1/1048576 of system clock frequency (ROM option) Serial Interface I/O Pins I/O Input A/D Inputs Special Ports Serial 0 : synchronous type/simple UART (half-duplex) x 1 Clock source ********************* 1/2, 1/4, 1/16 of system clock frequency; pulse output of timer counter 3 26 11 * Common use: 16 * Specified pull-up resistor available * Input/output selectable (bit unit): 26 * Common use * Specified pull-up resistor available 10-bit x 8-ch. (with S/H) Buzzer output, remote control carrier signal output, high-current drive port MAD00003GEM 22 www..com MN101C457 Electrical Characteristics Supply current Limit Parameter Symbol IDD1 IDD2 Supply current at STOP IDD3 IDD4 Condition min Operating supply current fosc = 20 MHz, VDD = 5 V fosc = 8.39 MHz, VDD = 5 V VDD = 5 V, Ta = 25C VDD = 5 V, Ta = -40C to +85C typ 15 6 max 40 18 2 20 mA mA A A Unit Support Tool In-circuit Emulator EPROM Built-in Type PX-ICE101C/D+PX-PRB101C42-QFP044-P-1010 Type ROM (x 8-bit) RAM (x 8-bit) Minimum instruction execution time MN101CP427BF 16 K 0.5 K 0.10 s (at 4.5 V to 5.5 V, 20 MHz) 0.238 s (at 2.7 V to 5.5 V, 8.39 MHz) Package QFP044-P-1010F *Lead-free MAD00003GEM LED3,P83 LED2,P82 LED1,P81 LED0,P80 AN0,PA0 AN1,PA1 AN2,PA2 AN3,PA3 AN4,PA4 AN5,PA5 AN6,PA6 1 2 3 4 5 6 7 8 9 10 11 P64 P65 P66 P67 P70 NRST,P27 MMOD LED7,P87 LED6,P86 LED5,P85 LED4,P84 33 32 31 30 29 28 27 26 25 24 23 P63 P62 P61 P60 P22,IRQ2 P21,IRQ1 P20,IRQ0 P14,TMIO4 P13,TMIO3 P12,TMIO2 P11 Pin Assignment 34 35 36 37 38 39 40 41 42 43 44 MN101C457 22 21 20 19 18 17 16 15 14 13 12 P10,RMOUT P06,BUZZER P02,SBT0 P01,SBI0,RXD P00,SBO0,TXD N.C. VSS OSC1 OSC2 VDD PA7,AN7 QFP044-P-1010F *Lead-free 23 www..com MN101C539 Type ROM (x8-bit) x RAM (x 8-bit) x Package Minimum Instruction Execution Time MN101C539 24 K (External memory can not be expanded) 0.5 K (External memory can not be expanded) TQFP048-P-0707B *Lead-free High speed mode: 0.10 s (at 4.5 V to 5.5 V, 20 MHz) 0.238 s (at 2.7 V to 5.5 V, 8.39 MHz) 1.00 s (at 2.0 V to 5.5 V, 4 MHz)* Low speed mode: 61.04 s (at 2.0 V to 5.5 V, 32.768 kHz)* * The lower limit for operation guarantee for EPROM built-in type is 2.7 V. * RESET * Watchdog * External 0 * External 1 * External 2 * External 3 * Timer 2 * Timer 3 * Timer 6 * Time Base * Serial 0 (2 systems) * A/D conversion finish * Timer 7 (2 systems) Timer counter 2 : 8-bit x 1 (square-wave/8-bit PWM output, event count, synchronous output event, pulse width measurement) Clock source ********************* 1/2, 1/4 of system clock frequency; 1/1, 1/4, 1/16, 1/32, 1/64 of OSC oscillation clock frequency; 1/1 of XI oscillation clock frequency; external clock input Interrupt source **************** coincidence with compare register 2 Timer counter 3 : 8-bit x 1 (square-wave output, event count, generation of remote control carrier) Clock source ********************* 1/2, 1/8 of system clock frequency; 1/1, 1/4, 1/16, 1/64, 1/128 of OSC oscillation clock frequency; 1/1 of XI oscillation clock frequency; external clock input Interrupt source **************** coincidence with compare register 3 Timer counter 2, 3 can be cascade-connected. Timer counter 6 : 8-bit freerun timer Clock source ********************* 1/1 of system clock frequency; 1/1, 1/4096, 1/8192 of OSC oscillation clock frequency; 1/1, 1/4096, 1/8192 of XI oscillation clock frequency Interrupt source **************** coincidence with compare register 6 Timer counter 7 : 16-bit x 1 (square-wave/16-bit PWM output, cycle / duty continuous variable, event count, synchronous output evevt, pulse width measurement, input capture) Clock source ********************* 1/1, 1/2, 1/4, 1/16 of system clock frequency; 1/1, 1/2, 1/4, 1/16 of OSC oscillation clock frequency; 1/1, 1/2, 1/4, 1/16 of external clock input frequency Interrupt source **************** coincidence with compare register 7 (2 lines) Time base timer (one-minute count setting) Clock source ********************* 1/1 of OSC oscillation clock frequency; 1/1 of XI oscillation clock frequency Interrupt source **************** 1/128, 1/256, 1/512, 1/1024, 1/8192, 1/32768 of clock source frequency Watchdog timer Interrupt source **************** 1/65536, 1/262144, 1/1048576 of system clock frequency Interrupts Timer Counter Serial Interface Serial 0 : synchronous type/UART (full-duplex) x 1 Clock source ********************* 1/2, 1/4 of system clock frequency; pulse output of timer counter 2, 3; 1/2, 1/4, 1/16, 1/64 of OSC oscillation clock frequency I/O Pins I/O Input 36 4 * Common use * Specified pull-up resistor available * Input/output selectable (bit unit) * Common use * Specified pull-up resistor available MAD00004DEM 24 www..com MN101C539 A/D Inputs Special Ports Electrical Characteristics Supply current 10-bit x 8-ch. (with S/H) Buzzer output, remote control carrier signal output, high-current drive port Limit Parameter Symbol IDD1 Operating supply current IDD2 IDD3 IDD4 Supply current at HALT IDD5 Supply current at STOP IDD6 Condition min fosc = 20 MHz, VDD = 5 V fosc = 8.39 MHz, VDD = 5 V fx = 32.768 kHz, VDD = 3 V fx = 32.768 kHz, VDD = 3 V, Ta = 25C fx = 32.768 kHz, VDD = 3 V, Ta = -40C to +85C VDD = 5 V, Ta = 25C VDD = 5 V, Ta = -40C to +85C typ 20 10 20 2 max 50 20 70 6 15 2 20 mA mA A A A A A Unit Support Tool In-circuit Emulator EPROM Built-in Type PX-ICE101C/D+PX-PRB101C53-TQFP048-P-0707B-M Type ROM (x 8-bit) RAM (x 8-bit) Minimum instruction execution time MN101CP539HT 24 K 0.5 K High speed mode: 0.10 s (at 4.5 V to 5.5 V, 20 MHz) 0.238 s (at 2.7 V to 5.5 V, 8.39 MHz) 1.00 s (at 2.7 V to 5.5 V, 4 MHz) Low speed mode:61.04 s (at 2.7 V to 5.5 V, 32.768 kHz) Package MAD00004DEM LED3/P83 LED2/P82 LED1/P81 LED0/P80 PC0 AN0/PA0 AN1/PA1 AN2/PA2 AN3/PA3 AN4/PA4 AN5/PA5 AN6/PA6 1 2 3 4 5 6 7 8 9 10 11 12 KEY4/P64 KEY5/P65 KEY6/P66 KEY7/P67 P70 P71 NRST/P27 MMOD LED7/P87 LED6/P86 LED5/P85 LED4/P84 36 35 34 33 32 31 30 29 28 27 26 25 P63/KEY3 P62/KEY2 P61/KEY1 P60/KEY0 P23/IRQ3 P22/IRQ2 P21/IRQ1/SENS P20/IRQ0 P14/TM7IO P13/TM3IO P12/TM2IO P11/TM7O Pin Assignment 37 38 39 40 41 42 43 44 45 46 47 48 MN101C539 24 23 22 21 20 19 18 17 16 15 14 13 P10/RMOUT/TM7PWM P06/BUZZER P02/SBT0 P01/SBI0/RXD P00/SBO0/TXD XO XI VSS OSC1 OSC2 VDD PA7/AN7 TQFP048-P-0707B *Lead-free TQFP048-P-0707B *Lead-free 25 www..com MN101C61D, MN101C61G Type ROM (x 8-bit) x RAM (x 8-bit) x Package Minimum Instruction Execution Time Standard: MN101C61D 64 K 3K TQFP080-P-1212D *Lead-free MN101C61G 128 K 12 K 0.1 s (at 2.5 V to 3.6 V, 20 MHz) 0.2 s (at 2.1 V to 3.6 V, 10 MHz) 0.5 s (at 1.8 V to 3.6 V, 4 MHz)* 125 s (at 1.8 V to 3.6 V, 32 kHz)* Double speed: 0.1 s (at 2.5 V to 3.6 V, 10 MHz) 0.2 s (at 2.1 V to 3.6 V, 5 MHz) 0.5 s (at 1.8 V to 3.6 V, 2 MHz)* 62.5 s (at 1.8 V to 3.6 V, 32 kHz)* * The operation guarantee range for flash memory built-in type is 2.2V to 3.0 V or 2.7V to 3.6 V. * RESET * Watchdog * External 0 * External 1 * External 2 * External 3 * External 4 * External 5 * Timer 0 * Timer 1 * Timer 2 * Timer 3 * Timer 4 * Timer 5 * Timer 6 * Time base * Serial 0 reception * Serial 0 transmission * Serial 1 reception * Serial 1 transmission * Serial 2 * Serial 3 * Automatic transfer finish * A/D conversion finish * Timer 7 (2 systems) * Key interrupts (8 lines) Timer counter 0 : 8-bit x 1 (square-wave/8-bit PWM output, event count, generation of remote control carrier, pulse width measurement) Clock source ********************* 1/2, 1/4 of system clock frequency; 1/1, 1/4, 1/16, 1/32, 1/64 of OSC oscillation clock frequency; 1/1 of XI oscillation clock frequency; external clock input Interrupt source **************** coincidence with compare register 0 Timer counter 1 : 8-bit x 1 (square-wave output, event count, synchronous output event) Clock source ********************* 1/2, 1/8 of system clock frequency; 1/1, 1/4, 1/16, 1/64, 1/128 of OSC oscillation clock frequency; 1/1 of XI oscillation clock frequency; external clock input Interrupt source **************** coincidence with compare register 1 Timer counter 0, 1 can be cascade-connected. Timer counter 2 : 8-bit x 1 (square-wave/8-bit PWM output, event count, synchronous output event, pulse width measurement) Clock source ********************* 1/2, 1/4 of system clock frequency; 1/1, 1/4, 1/16, 1/32, 1/64 of OSC oscillation clock frequency; 1/1 of XI oscillation clock frequency; external clock input Interrupt source **************** coincidence with compare register 2 Timer counter 3 : 8-bit x 1 (square-wave output, event count, generation of remote control carrier) Clock source ********************* 1/2, 1/8 of system clock frequency; 1/1, 1/4, 1/16, 1/64, 1/128 of OSC oscillation clock frequency; 1/1 of XI oscillation clock frequency; external clock input Interrupt source **************** coincidence with compare register 3 Timer counter 2, 3 can be cascade-connected. Timer counter 4 : 8-bit x 1 (square-wave/8-bit PWM output, event count, pulse width measurement, serial 1 baud rate timer) Clock source ********************* 1/2, 1/4 of system clock frequency; 1/1, 1/4, 1/16, 1/32, 1/64 of OSC oscillation clock frequency; 1/1 of XI oscillation clock frequency; 1/1 of external clock input frequency Interrupt source **************** coincidence with compare register 4 Timer counter 5 : 8-bit x 1 (square-wave/8-bit PWM output, event count, pulse width measurement, serial 0 baud rate timer) Clock source ********************** 1/2, 1/4 of system clock frequency; 1/1, 1/4, 1/16, 1/32, 1/64 of OSC oscillation clock frequency; 1/1 of XI oscillation clock frequency; 1/1 of external clock input frequency Interrupt source ****************** coincidence with compare register 5 MAD00009FEM Interrupts Timer Counter 26 www..com MN101C61D, MN101C61G Timer Counter (Continue) Timer counter 6 : 8-bit freerun timer Clock source ********************* 1/1 of system clock frequency; 1/1, 1/4096, 1/8192 of OSC oscillation clock frequency; 1/1, 1/4096, 1/8192 of XI oscillation clock frequency Interrupt source ***************** coincidence with compare register 6 Timer counter 7 : 16-bit x 1 (square-wave/16-bit PWM output, cycle / duty continuous variable, event count, synchronous output evevt, pulse width measurement, input capture) Clock source ********************* 1/1, 1/2, 1/4, 1/16 of system clock frequency; 1/1, 1/2, 1/4, 1/16 of OSC oscillation clock frequency; 1/1, 1/2, 1/4, 1/16 of external clock input frequency Interrupt source ***************** coincidence with compare register 7 (2 lines) Time base timer (one-minute count setting) Clock source ********************* 1/1 of OSC oscillation clock frequency; 1/1 of XI oscillation clock frequency Interrupt source ***************** 1/128, 1/256, 1/512, 1/1024, 1/8192, 1/32768 of clock source frequency Watchdog timer Interrupt source ***************** 1/65536, 1/262144, 1/1048576 of system clock frequency DMA Controller (Automatic Data Transfer) Serial Interface Max. Transfer cycles : 255 Starting factor : external request, various types of interrupt, software Transfer mode : 1-byte transfer, word transfer, burst transfer Serial 0 : synchronous type / UART (full-duplex) x 1 Clock source ********************* 1/2, 1/4 of system clock frequency; pulse output of timer counter 5; 1/2, 1/4, 1/16, 1/64 of OSC oscillation clock frequency Serial 1 : synchronous type / UART (full-duplex) x 1 Clock source ********************* 1/2, 1/4 of system clock frequency; pulse output of timer counter 4; 1/2, 1/4, 1/16, 1/64 of OSC oscillation clock frequency Serial 2 : synchronous type x 1 Clock source ********************* 1/2, 1/4 of system clock frequency; pulse output of timer counter 3; 1/2, 1/4, 1/16, 1/32 of OSC oscillation clock frequency Serial 3 : synchronous type/single-master I 2C x 1 Clock source ********************* 1/2, 1/4 of system clock frequency; pulse output of timer counter 3; 1/2, 1/4, 1/16, 1/32 of OSC oscillation clock frequency I/O Pins A/D Inputs Special Ports ROM Correction I/O Input 62 6 * Common use * Specified pull-up resistor available * Input/output selectable (bit unit) * Common use * Specified pull-up resistor available 10-Bit x 6-ch. (with S/H) Buzzer output, remote control carrier signal output, high-current drive port Correcting address designation : up to 3 addresses possible See the next page for electrical characteristics, pin assignment and support tool. MAD00009FEM 27 www..com Electrical Characteristics Supply current Limit Parameter Symbol IDD1 Operating supply current IDD2 IDD3 IDD4 Supply current at HALT IDD5 IDD6 Supply current at STOP IDD7 VDD = 3 V 20 fx = 32.768 kHz, VDD = 3 V VDD = 3 V, Ta = 25C 30 2 Condition min fosc = 20 MHz, VDD = 3 V, (fs = fosc/2) fosc = 8.39 MHz, VDD = 3 V, (fs = fosc/2) fx = 32.768 kHz, VDD = 3 V, (fs = fx/2) fx = 32.768 kHz, VDD = 3 V, Ta = 25C 4 typ 5 2 max 12 5 40 8 mA mA A A A A A Unit Ta = -40C to +85C, VDD = 1.8 V to 3.6 V, VSS = 0 V Note) Ta = - 20C to +70 C for a flash memory built-in version. Supply voltage range ans supply current ratings are also different from the values mentioned above. Refer to Chapter 18 "Flash EEPROM" for detailes P40/TXD0/SBO0/KEY0 Pin Assignment P41/RXD0/SBI0/KEY1 P43/TCIO5/KEY3 P42/SBT0/KEY2 P47/KEY7/A15 P46/KEY6/A14 P52/IRQ5/NCS P45/KEY5/A9 P44/KEY4/A8 P50/NWE P37/TCIO4/NDKDMA 43 60 59 58 57 56 55 54 53 52 51 50 49 48 47 46 45 44 42 P64/A4 P65/A5 P66/A6 P67/A7 P70/SDO0 P71/SDO1 P72/A10/SDO2 P73/A11/SDO3 P74/A12/SDO4 P75/A13/SDO5 P76/SDO6 P77/SDO7 P87/LED7,D7 P86/LED6,D6 P85/LED5,D5 P84/LED4,D4 P83/LED3,D3 P82/LED2,D2 P81/LED1,D1 P80/LED0,D0 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 10 11 12 13 14 15 16 17 18 19 20 41 P35/NLDDMA P36/NSTDMA P51/NRE P54/A17 P53/A16 P63/A3 P62/A2 P61/A1 P60/A0 40 39 38 37 36 35 34 33 NBT/P34 NBR/P33 SBT3/P32 SYSCLK/SBI3/P31 SBO3/P30 IRQ4/P24 IRQ3/P23 IRQ2/P22 ACZ/IRQ1/P21 IRQ0/P20 TCIO7/P14 TCIO3/P13 TCIO2/P12 TCIO1/P11 RMOUT/TCIO0/P10 NRST/P27 NDK/BUZZER/P06 SBT2/P05 SBI2/P04 SBO2/P03 MN101C61D MN101C61G 32 31 30 29 28 27 26 25 24 23 22 21 1 2 3 4 5 6 7 8 AN0/PA0 AN1/PA1 AN2/PA2 AN3/PA3 AN4/PA4 AN5/PA5 9 TXD1/SBO1/P00 VREF- OUTC NC VREF+ OSC2 OSC1 VSS XI RXD1/SBI1/P01 TQFP080-P-1212D *Lead-free NC serves as the VPP pin in the MN101CF61G, and cannot be used as a user pin. SBT1/P02 VDD XO MMOD MAD00009FEM 28 www..com MN101C61D, MN101C61G Support Tool In-circuit Emulator Flash Memory Built-in Type PX-ICE101C / D + PX-PRB101C61-TQFP080-P-1212-M Type ROM (x 8-bit) RAM (x 8-bit) Minimum instruction execution time MN101CF61G 128 K 12 K 0.1 s (at 2.7 V to 3.6 V, 20 MHz) 0.2 s (at 2.7 V to 3.6 V, 10 MHz) 0.5 s (at 2.7 V to 3.6 V, 4 MHz) 125 s (at 2.7 V to 3.6 V, 32 kHz) Package Type ROM (x 8-bit) RAM (x 8-bit) Minimum instruction execution time TQFP080-P-1212D *Lead-free MN101CF60G 128 K 12 K 0.1 s (at 2.5 V to 3.0 V, 20 MHz) 0.2 s (at 2.2 V to 3.0 V, 10 MHz) 0.5 s (at 2.2 V to 3.0 V, 4 MHz) 125 s (at 2.2 V to 3.0 V, 32 kHz) Package TQFP080-P-1212D *Lead-free MAD00009FEM 29 www..com MN101C62D , MN101C62F Type ROM (x 8-bit) x RAM (x 8-bit) x Package Minimum Instruction Execution Time MN101C62D 64 K 2K LQFP080-P-1414A *Lead-free Standard: 0.10 s (at 4.5 V to 5.5 V, 20 MHz) 0.25 s (at 2.7 V to 5.5 V, 8 MHz) 1.00 s (at 2.0 V to 5.5 V, 2 MHz)* 125 s (at 2.0 V to 5.5 V, 32 kHz)* Double speed: 0.125 s (at 4.5 V to 5.5 V, 8 MHz) 0.25 s (at 3.0 V to 5.5 V, 4 MHz) 62.5 s (at 2.0 V to 5.5 V, 32 kHz)* MN101C62F 96 K 4K * The lower limit for operation guarantee for flash memory built-in type is 2.5 V. Interrupts * Watchdog * External 0 * External 1 * External 2 * External 3 * External 4 * Timer 0 * Timer 1 * Timer 2 *Timer 3 * Timer 4 * Timer 6 * Time base * Timer 7 (2 systems) * Timer 8 (2 systems) * Automatic transfer completion * Serial 0 (2 systems) * Serial 1 (2 systems) * Serial 2 * A/D conversion finish * Key interrupt Timer Counter Timer counter 0 : 8-bit x 1 (square-wave/8-bit PWM output, event count, generation of remote control carrier, simple pulse width measurement) Clock source ********************* 1/2, 1/4 of system clock frequency; 1/1, 1/4, 1/16, 1/32, 1/64 of OSC oscillation clock frequency; 1/1 of XI oscillation clock frequency; external clock input Interrupt source **************** coincidence with compare register 0 Timer counter 1 : 8-bit x 1 (square-wave output, event count, synchronous output event, serial baud rate timer) Clock source ********************* 1/2, 1/8 of system clock frequency; 1/1, 1/4, 1/16, 1/64, 1/128 of OSC oscillation clock frequency; 1/1 of XI oscillation clock frequency; external clock input Interrupt source **************** coincidence with compare register 1 Timer counter 0, 1 can be cascade-connected. Timer counter 2 : 8-bit x 1 (square-wave output, event count, sychronous output event, simple pulse width measurement, generation of real time, serial baud rate timer) Clock source ********************* 1/2, 1/4 of system clock frequency; 1/1, 1/4, 1/16, 1/32, 1/64 of OSC oscillation clock frequency; 1/1 of XI oscillation clock frequency; external clock input Interrupt source **************** coincidence with compare register 2 Timer counter 3 : 8-bit x 1 (square-wave output, event count, generation of remote control carrier, serial baud rate timer) Clock source ********************* 1/2, 1/8 of system clock frequency; 1/1, 1/4, 1/16, 1/64, 1/128 of OSC oscillation clock frequency; 1/1 of XI oscillation clock frequency; external clock input Interrupt source **************** coincidence with compare register 3 Timer counter 2, 3 can be cascade-connected. Timer counter 4 : 8-bit x 1 (square-wave/8-bit PWM output, event count, generation of remote control carrier, simple pulse width measurement) Clock source ********************* 1/2, 1/4 of system clock frequency; 1/1, 1/4, 1/16, 1/32, 1/64 of OSC oscillation clock frequency; 1/1 of XI oscillation clock frequency; external clock input Interrupt source **************** coincidence with compare register 0 Timer counter 6 : 8-bit freerun timer Clock source ********************* 1/1 of system clock frequency; 1/1, 1/128, 1/8192 of OSC oscillation clock frequency; 1/1, 1/4096, 1/8192 of XI oscillation clock frequency Interrupt source **************** coincidence with compare register 6 MAD00020GEM 30 www..com MN101C62D, MN101C62F Timer Counter (Continue) Timer counter 7 : 16-bit x 1 (square-wave output, 16-bit PWM output (cycle / duty continuous variable), event count, synchronous output evevt, pulse width measurement, input capture, generation of real time) Clock source ********************* 1/1, 1/2, 1/4, 1/16 of system clock frequency; 1/1, 1/2, 1/4, 1/16 of OSC oscillation clock frequency; 1/1, 1/2, 1/4, 1/16 of external clock input frequency Interrupt source **************** coincidence with compare register 7 (2 lines) Watchdog timer Interrupt source **************** 1/65536, 1/262144, 1/1048576 of system clock frequency Timer counter 8 : 16-bit x 1 (square-wave output, 16-bit PWM output (cycle / duty continuous variable), event count, synchronous output evevt, pulse width measurement, input capture, generation of real time) Clock source ********************* 1/1, 1/2, 1/4, 1/16 of system clock frequency; 1/1, 1/2, 1/4, 1/16 of OSC oscillation clock frequency; 1/1, 1/2, 1/4, 1/16 of external clock input frequency Interrupt source **************** coincidence with compare register 7 (2 lines) Watchdog timer Interrupt source **************** 1/65536, 1/262144, 1/1048576 of system clock frequency Serial Interface Serial 0 : synchronous type/UART (full-duplex) x 1 Clock source ********************* 1/2, 1/4 of system clock frequency; pulse output of timer counter 1 or 2; 1/2, 1/4, 1/16, 1/64 of OSC oscillation clock frequency Serial 1 : synchronous type/UART (full-duplex) x 1 Clock source ********************* 1/2, 1/4 of system clock frequency; pulse output of timer counter 2 or 3; 1/2,1/8 of timer counter 2 output; 1/2, 1/4, 1/16, 1/64 of OSC oscillation clock frequency Serial 2 : synchronous type / single-master I 2C Clock source ********************* 1/2, 1/4 of system clock frequency; pulse output of timer counter 2 or 3; 1/2, 1/4, 1/8, 1/32 of OSC oscillation clock frequency I/O Pins A/D Inputs Special Ports ROM Correction I/O 68 * Common use * Specified pull-up resistor available * Input/output selectable (bit unit) 10-bit x 8-ch. (with S/H) Buzzer output, remote control carrier signal output, high-current drive port Correcting address designation: up to 3 addresses possible See the next page for pin assignment and support tool. MAD00020GEM 31 www..com Electrical Characteristics Supply current Limit Parameter Symbol IDD1 Operating supply current IDD2 IDD3 Supply current at HALT IDD4 Supply current at STOP IDD5 IDD6 fx = 32 kHz, VDD = 3 V, Ta = 85C VDD = 5 V, Ta = 25C VDD = 5 V, Ta = 85C 30 2 50 fx = 32 kHz, VDD = 3 V fx = 32 kHz, VDD = 3 V, Ta = 25C 30(50) 60(120) 6 8 Condition min fosc = 20 MHz, VDD = 5 V typ max mA A A A A A 15(20) 30(40) Unit ( ) : Flash memory built-in type Pin Assignment P35/SBT0B 41 P47/KEY7 P46/KEY6 P45/KEY5 P44/KEY4 P43/KEY3 P42/KEY2 44 P41/KEY1 43 60 59 58 57 56 55 54 53 52 51 50 49 48 47 46 45 P64/A04 P65/A05 P66/A06 P67/A07 P70SD00/A08 P71/SD01/A09 P72/SD02/A10 P73/SD03/A11 P74/SD04/A12 P75/SD05/A13 P76/SD06/A14 P77/SD07/A15 P87/LED7/D7 P86/LED6/D6 P85/LED5/D5 P84/LED4/D4 P83/LED3/D3 P82/LED2/D2 P81/LED1/D1 P80/LED0/D0 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 10 11 12 13 14 15 16 17 18 19 20 42 P40/KEY0 P50/NWE P51/NRE P52/NCS P63/A03 P62/A02 P61/A01 P60/A00 P54/A17 P53/A16 VDD2 VSS2 40 39 38 37 36 35 34 33 TM8I0/RXD0B/SBI0B/P34 TM4I0/TXD0B/SB00B/P33 SCL/SBT2/P32 SBI2/P31 SDA/SB02/P30 IRQ4/P24 IRQ3/P23 IRQ2/P22 ACZ/IRQ1/P21 IRQ0/P20 TM7I0/P14 TM3I0/P13 TM2I0/P12 TM1I0/P11 RMOUT/TMOI0/P10 NDK/BUZZER/P06 SBT1/P05 RXD1/SBI1/P04 TXD1/SB01/P03 SBT0A/P02 MN101C62D MN101C62F 32 31 30 29 28 27 26 25 24 23 22 21 1 2 3 4 5 6 7 8 9 TXD0A/SB00A/P00 LQFP080-P-1414A *Lead-free RXD0A/SBI0A/P01 NRST/P27 AN0/PA0 AN1/PA1 AN2/PA2 AN3/PA3 AN4/PA4 AN5/PA5 AN6/PA6 AN7/PA7 VREF+ MM0D VSS3 VDD1 OSC2 OSC1 VSS1 XI X0 MAD00020GEM 32 www..com MN101C62D , MN101C62F Support Tool In-circuit Emulator Flash Memory Built-in Type PX-ICE101C / D + PX-PRB101C62-LQFP080-P-1414A-M Type ROM (x 8-bit) RAM (x 8-bit) Minimum instruction execution time MN101CF62G 128 K 10 K Standaed: 0.1 s (at 4.5 V to 5.5 V, 20 MHz) 0.25 s (at 2.7 V to 5.5 V, 8 MHz) 1.0 s (at 2.5 V to 5.5 V, 2 MHz) 125 s (at 2.5 V to 5.5 V, 32 kHz) Double speed: 0.125 s (at 4.5 V to 5.5 V, 20 MHz) 0.25 s (at 3.0 V to 5.5 V, 8 MHz) 62.5 s (at 2.5 V to 5.5 V, 32 kHz) Package LQFP080-P-1414A *Lead-free MAD00020GEM 33 www..com MN101C67D, MN101C67G Type ROM (x 8-bit) x RAM (x 8-bit) x Package Minimum Instruction Execution Time Standard: MN101C67D 64 K 6K TQFP080-P-1212D *Lead-free MN101C67G 128 K 10 K 0.1 s (at 2.5 V to 3.6 V, 20 MHz)* 0.2 s (at 2.1 V to 3.6 V, 10 MHz)* 0.5 s (at 1.8 V to 3.6 V, 4 MHz)* 62.5 s (at 1.8 V to 3.6 V, 32 kHz)* Double speed: 0.119 s (at 2.5 V to 3.6 V, 8.39 MHz)* * The operation guarantee range for flash memory built-in type is 2.7 V to 3.6 V. * RESET * Watchdog * External 0 * External 1 * External 2 * External 3 * External 4 * External 5 * Timer 0 * Timer 1 * Timer 2 * Timer 3 * Timer 4 * Timer 5 * Timer 6 * Time base * Serial 0 reception * Serial 0 transmission * Serial 1 reception * Serial 1 transmission * Serial 2 * Serial 3 * Serial 4 * Automatic transfer finish * A/D conversion finish * Timer 7 (2 systems) * Key interrupts (8 lines) Timer counter 0 : 8-bit x 1 (square-wave/8-bit PWM output, event count, generation of remote control carrier, pulse width measurement) Clock source ********************* 1/2, 1/4 of system clock frequency; 1/1, 1/4, 1/16, 1/32, 1/64 of OSC oscillation clock frequency; 1/1 of XI oscillation clock frequency; external clock input Interrupt source **************** coincidence with compare register 0 Timer counter 1 : 8-bit x 1 (square-wave output, event count, synchronous output event) Clock source ********************* 1/2, 1/8 of system clock frequency; 1/1, 1/4, 1/16, 1/64, 1/128 of OSC oscillation clock frequency; 1/1 of XI oscillation clock frequency; external clock input Interrupt source **************** coincidence with compare register 1 Timer counter 0, 1 can be cascade-connected. Timer counter 2 : 8-bit x 1 (square-wave/8-bit PWM output, event count, synchronous output event, pulse width measurement) Clock source ********************* 1/2, 1/4 of system clock frequency; 1/1, 1/4, 1/16, 1/32, 1/64 of OSC oscillation clock frequency; 1/1 of XI oscillation clock frequency; external clock input Interrupt source **************** coincidence with compare register 2 Timer counter 3 : 8-bit x 1 (square-wave output, event count, generation of remote control carrier) Clock source ********************* 1/2, 1/8 of system clock frequency; 1/1, 1/4, 1/16, 1/64, 1/128 of OSC oscillation clock frequency; 1/1 of XI oscillation clock frequency; external clock input Interrupt source **************** coincidence with compare register 3 Timer counter 2, 3 can be cascade-connected. Timer counter 4 : 8-bit x 1 (square-wave/8-bit PWM output, event count, pulse width measurement, serial 1 baud rate timer) Clock source ********************* 1/2, 1/4 of system clock frequency; 1/1, 1/4, 1/16, 1/32, 1/64 of OSC oscillation clock frequency; 1/1 of XI oscillation clock frequency; 1/1 of external clock input frequency Interrupt source **************** coincidence with compare register 4 Timer counter 5 : 8-bit x 1 (square-wave/8-bit PWM output, event count, pulse width measurement, serial 0 baud rate timer) Clock source ********************** 1/2, 1/4 of system clock frequency; 1/1, 1/4, 1/16, 1/32, 1/64 of OSC oscillation clock frequency; 1/1 of XI oscillation clock frequency; 1/1 of external clock input frequency Interrupt source ****************** coincidence with compare register 5 Interrupts Timer Counter MAD00036GEM 34 www..com MN101C67D, MN101C67G Timer Counter (Continue) Timer counter 6 : 8-bit freerun timer Clock source ********************* 1/1 of system clock frequency; 1/1, 1/4096, 1/8192 of OSC oscillation clock frequency; 1/1, 1/4096, 1/8192 of XI oscillation clock frequency Interrupt source **************** coincidence with compare register 6 Timer counter 7 : 16-bit x 1 (square-wave/16-bit PWM output, cycle / duty continuous variable, event count, synchronous output evevt, pulse width measurement, input capture) Clock source ********************* 1/1, 1/2, 1/4, 1/16 of system clock frequency; 1/1, 1/2, 1/4, 1/16 of OSC oscillation clock frequency; 1/1, 1/2, 1/4, 1/16 of external clock input frequency Interrupt source **************** coincidence with compare register 7 (2 lines) Time base timer (one-minute count setting) Clock source ********************* 1/1 of OSC oscillation clock frequency; 1/1 of XI oscillation clock frequency Interrupt source **************** 1/128, 1/256, 1/512, 1/1024, 1/8192, 1/32768 of clock source frequency Watchdog timer Interrupt source **************** 1/65536, 1/262144, 1/1048576 of system clock frequency DMA Controller (Automatic Data Transfer) Serial Interface Max. Transfer cycles : 255 Starting factor : external request, various types of interrupt, software Transfer mode : 1-byte transfer, word transfer, burst transfer Serial 0 : synchronous type / UART (full-duplex) x 1 Clock source ********************* 1/2, 1/4 of system clock frequency; pulse output of timer counter 5; 1/2, 1/4, 1/16, 1/64 of OSC oscillation clock frequency Serial 1 : synchronous type / UART (full-duplex) x 1 Clock source ********************* 1/2, 1/4 of system clock frequency; pulse output of timer counter 4; 1/2, 1/4, 1/16, 1/64 of OSC oscillation clock frequency Serial 2 : synchronous type x 1 Clock source ********************* 1/2, 1/4 of system clock frequency; pulse output of timer counter 3; 1/2, 1/4, 1/16, 1/32 of OSC oscillation clock frequency Serial 3 : synchronous type/single-master I 2C x 1 Clock source ********************* 1/2, 1/4 of system clock frequency; pulse output of timer counter 3; 1/2, 1/4, 1/16, 1/32 of OSC oscillation clock frequency Serial 4 : I2C slave x 1 Applicable for I2C high-speed transfer mode, 7 bit/10bit address setting, general call I/O Pins A/D Inputs Special Ports ROM Correction I/O Input 62 7 * Common use * Specified pull-up resistor available * Input/output selectable (bit unit) * Common use * Specified pull-up resistor available 10-bit x 7-ch. (with S/H) Buzzer output, remote control carrier signal output, high-current drive port Correcting address designation: up to 3 addresses possible See the next page for electrical characteristics, pin assignment and support tool. MAD00036GEM 35 www..com Electrical Characteristics Supply current Limit Parameter Symbol IDD1 Operating supply current IDD2 IDD3 IDD4 Supply current at HALT IDD5 IDD6 Supply current at STOP IDD7 VDD = 3 V, Ta = 85C 20 fx = 32.768 kHz, VDD = 3 V VDD = 3 V, Ta = 25C 30 2 Condition min fosc = 20 MHz, VDD = 3 V, (fs = fosc/2) fosc = 8.39 MHz, VDD = 3 V, (fs = fosc/2) fx = 32.768 kHz, VDD = 3 V, (fs = fx/2) fx = 32.768 kHz, VDD = 3 V, Ta = 25C 4 typ 5 2 max 12 5 40 8 mA mA A A A A A Unit Ta = -40C to +85C, VDD = 1.8 V to 3.6 V, VSS = 0 V P40/TXD0/SBO0/KEY0 P41/RXD0/SBI0/KEY1 P37/TCIO4/NDKDMA 43 Pin Assignment P43/TCIO5/KEY3 P42/SBT0/KEY2 P47/KEY7/A15 P46/KEY6/A14 P52/IRQ5/NCS P45/KEY5/A9 P44/KEY4/A8 P50/NWE P51/NRE P54/A17 P53/A16 P63/A3 P62/A2 P61/A1 P60/A0 P36/SDA 42 60 59 58 57 56 55 54 53 52 51 50 49 48 47 46 45 44 P64/A4 P65/A5 P66/A6 P67/A7 P70/SDO0 P71/SDO1 P72/A10/SDO2 P73/A11/SDO3 P74/A12/SDO4 P75/A13/SDO5 P76/SDO6 P77/SDO7 P87/LED7,D7 P86/LED6,D6 P85/LED5,D5 P84/LED4,D4 P83/LED3,D3 P82/LED2,D2 P81/LED1,D1 P80/LED0,D0 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 10 11 12 13 14 15 16 17 18 19 20 41 P35/SCL 40 39 38 37 36 35 34 33 32 P34 P33 P32 SYSCLK/SBI3/P31 SBO3/P30 IRQ4/P24 IRQ3/P23 IRQ2/P22 ACZ/IRQ1/P21 IRQ0/P20 TCIO7/P14 TCIO3/P13 TCIO2/P12 TCIO1/P11 RMOUT/TCIO0/P10 NRST/P27 NDK/BUZZER/P06 SBT2/P05 SBI2/P04 SBO2/P03 MN101C67D MN101C67G 31 30 29 28 27 26 25 24 23 22 21 1 2 3 4 5 6 7 8 AN0/PA0 AN1/PA1 AN2/PA2 AN3/PA3 AN4/PA4 AN5/PA5 VREF- OUTC NC 9 VREF+ VDD OSC2 OSC1 VSS XI XO MMOD TXD1/SBO1/P00 SDA/RXD1/SBI1/P01 TQFP080-P-1212D *Lead-free NC serves as the VPP pin in the MN101CF67G, and cannot be used as a user pin. SCL/SBT1/P02 MAD00036GEM 36 www..com MN101C67D, MN101C67G Support Tool In-circuit Emulator Flash Memory Built-in Type PX-ICE101C / D + PX-PRB101C67-TQFP080-P-1212-M Type ROM (x 8-bit) RAM (x 8-bit) Minimum instruction execution time Package MN101CF67G 128 K 10 K Standard: 0.1 s (at 2.7 V to 3.6 V, 20 MHz) TQFP080-P-1212D *Lead-free MAD00036GEM 37 www..com MN101CF91D Type ROM (x 8-bit) x RAM (x 8-bit) x Package Minimum Instruction Execution Time Interrupts MN101CF91D 64K (flash memory) 4K TQFP048-P-0707B *Lead-free 0.1 s (at 2.7 V to 3.6 V, 10 MHz) 62.5 s (at 2.7 V to 3.6 V, 32 kHz) * RESET * Watchdog * External 0 * External 1 * External 2 * External 3 * External 4 * External 5 * External 6 (key interrupt dedicated) * Timer 0 * Timer 1 * Timer 2 * Timer 3 * Timer 4 * Timer 6 * Time base * Timer 7 (2 systems) * Timer 8 (2 systems) * Serial 0 (2 systems) * Serial 1 (2 systems) * Serial 2 (3 systems) * A/D conversion finish Timer counter 0: 8-bit x 1 (square-wave output, PWM output, event count, simple pulse width measurement) (square-wave/PWM output to large current terminal P50 (TM0OA) or P30 (TM0OB) possible) Clock source ********************* 1/2, 1/4 of system clock frequency; 1/1, 1/4, 1/16, 1/32, 1/64 of OSC oscillation clock frequency; 1/1 of XI oscillation clock frequency; external clock input Interrupt source ***************** coincidence with compare register 0 Timer counter 1: 8-bit x 1 (square-wave output, event count, serial transfer clock) Clock source ********************* 1/2, 1/8 of system clock frequency; 1/1, 1/4, 1/16, 1/64, 1/128 of OSC oscillation clock frequency; 1/1 of XI oscillation clock frequency; external clock input Interrupt source ***************** coincidence with compare register 1 Timer counter 0, 1 can be cascade-connected. Timer counter 2: 8-bit x 1 (square-wave output, PWM output, event count, simple pulse width measurement) (serial transfer clock) (square-wave/PWM output to large current terminal P52 (TM2OA) or P32 (TM2OB) possible) Clock source ********************* 1/2, 1/4 of system clock frequency; 1/1, 1/4, 1/16, 1/32, 1/64 of OSC oscillation clock frequency; 1/1 of XI oscillation clock frequency; external clock input Interrupt source ***************** coincidence with compare register 2 Timer counter 3: 8-bit x 1 (square-wave output, event count) Clock source ********************* 1/2, 1/8 of system clock frequency; 1/1, 1/4, 1/16, 1/64, 1/128 of OSC oscillation clock frequency; 1/1 of XI oscillation clock frequency; external clock input Interrupt source ***************** coincidence with compare register 3 Timer counter 2, 3 can be cascade-connected. Timer counter 4: 8-bit x 1 (square-wave output, PWM output, event count, simple pulse width measurement) Clock source ********************* 1/2, 1/8 of system clock frequency; 1/1, 1/4, 1/16, 1/64, 1/128 of OSC oscillation clock frequency; 1/1 of XI oscillation clock frequency; external clock input Interrupt source ***************** coincidence with compare register 4 Timer Counter MAD00055BEM 38 www..com MN101CF91D Timer Counter (Continue) Timer counter 6: 8-bit freerun timer Clock source ********************* 1/1 of system clock frequency; 1/1, 1/128, 1/8192 of OSC oscillation clock frequency; 1/1, 1/128, 1/8192 of XI oscillation clock frequency Interrupt source ***************** coincidence with compare register 6 Timer counter 7: 16-bit x 1 (square-wave output, PWM output (cycle / duty continuous variable), event count, pulse width measurement, input capture) (square-wave/PWM output to large current terminal P51 (TM7O) possible) Clock source ********************* 1/1, 1/2, 1/4, 1/16 of system clock frequency; 1/1, 1/2, 1/4, 1/16 of OSC oscillation clock frequency; 1/1, 1/2, 1/4, 1/16 of external clock input frequency Interrupt source ***************** coincidence with compare register 7 (2 lines), input capture register Timer counter 8: 16 bit x 1 (square-wave output, PWM output (cycle / duty continuous variable), event count, pulse width measurement, input capture) (square-wave/PWM output to large current terminal P53 (TM8O) possible) Clock source ********************* 1/1, 1/2, 1/4, 1/16 of system clock frequency; 1/1, 1/2, 1/4, 1/16 of OSC oscillation clock frequency; 1/1, 1/2, 1/4, 1/16 of external clock input frequency Interrupt source ***************** coincidence with compare register 8 (2 lines), input capture register Time base timer (one-minute count setting) Clock source ********************* 1/1 of OSC oscillation clock frequency; 1/1 of XI oscillation clock frequency Interrupt source ***************** 1/128, 1/256, 1/512, 1/1024, 1/4096, 1/8192, 1/16384, 1/32768 of clock source frequency Watchdog timer Interrupt source ***************** 1/65536, 1/262144, 1/1048576 of system clock frequency Serial Interface Serial 0: synchronous type/UART (full-duplex) x 1 Clock source ********************* 1/2, 1/4 of system clock frequency; pulse output of timer counter 1 or 2; 1/2, 1/4, 1/16, 1/64 of OSC oscillation clock frequency, external clock Serial 1: synchronous type/UART (full-duplex) x 1 Clock source ********************* 1/2, 1/4 of system clock frequency; pulse output of timer counter 1 or 2; 1/2, 1/4, 1/16, 1/64 of OSC oscillation clock frequency, external clock Serial 2: synchronous type/multi-master I2C x 1 (applicable for 7-bit/10-bit address setting, general call, SMBus) I/O Pins A/D Inputs Special Ports I/O 37 * Common use * Specified pull-up resistor available * Input/output selectable (bit unit) 10-bit x 6-ch. (with S/H) Buzzer output, remote control carrier signal output, high-current drive port, clock output MAD00055BEM 39 www..com Pin Assignment P35 / KEY5 / NBUZZER P36 / KEY6 / CLKOUT P34 / KEY4 / BUZZER P32 / KEY2 / TM2OB P30 / KEY0 / TM0OB P33 / KEY3 / TM3IO P31 / KEY1 / TM1IO P23 / IRQ3 P22 / IRQ2 P21 / IRQ1 26 36 35 34 33 32 31 30 29 28 27 P40 / RXD0B / SBI0B P41 / TXD0B / SBO0B P42 / SBT0B P43 / RXD1B / SBI1B P44 / TXD1B / SBO1B P45 / SBT1B P50 / LED0 / TM0OA P51 / LED1 / TM7O P52 / LED2 / TM2OA P53 / LED3 / TM8O P54 / LED4 / IRQ4 P55 / LED5 / IRQ5 37 38 39 40 41 42 43 44 45 46 47 48 25 24 23 22 21 20 19 P20 / IRQ0 DMOD SCL2 / SBT2 / P16 SDA2 / SBO2 / P15 TM4IO / SBI2 / P14 TM8IO / P13 TM7IO / P12 TM2IO / P11 RMOUT / TM0IO / P10 SBT1A / AN5 / P05 TXD1A / SBO1A / AN4 / P04 RXD1A / SBI1A / AN3 / P03 SBT0A / AN2 / P02 TXD0A / SBO0A / AN1 / P01 MN101CF91D 18 17 16 15 14 13 10 11 Vref+ TQFP048-P-0707B *Lead-free Support Tool In-circuit Emulator PX-ICE101C / D + PX-PRB101C91-TQFP048-P-0707B-CN-M RXD0A / SBI0A / AN0 / P00 VSS OSC2 OSC1 NRST / P27 XI XO MMOD OSCMOD VDD18 VDD33 12 1 2 3 4 5 6 7 8 9 MAD00055BEM 40 www..com MN101CF91D MAD00055BEM 41 www..com MN101C94A Type ROM (x 8-bit) x RAM (x 8-bit) x Package Minimum Instruction Execution Time MN101C94A 32 K 1K QFP044-P-1010F *Lead-free 0.10 s (at 4.5 V to 5.5 V, 20 MHz) 0.238 s (at 2.7 V to 5.5 V, 8.39 MHz) 0.477 s (at 2.0 V to 5.5 V, 4.19 MHz)* * The lower limit for operation guarantee for flash memory built-in type is 2.5 V. * RESET * Watchdog * External 0 * External 1 * External 2 * Timer 0 * Timer 1 * Timer 2 * Timer 3 * Timer 4 * Timer 5 * Time base * Serial 0 * A/D conversion finish Timer counter 0 : 8-bit x 1 (square-wave/8-bit PWM output, event count, generation of remote control carrier) Clock source ********************* 1/1, 1/4 of system clock frequency; 1/1 of OSC oscillation clock frequency; external clock input Interrupt source ***************** coincidence with compare register 0 Timer counter 1 : 8-bit x 1 (square-wave output, event count, synchronous output event) Clock source ********************* 1/16, 1/64 of system clock frequency; external clock input Interrupt source ***************** coincidence with compare register 1 Timer counter 0, 1 can be cascade-connected. Timer counter 2 : 8-bit x 1 (square-wave/8-bit PWM output, event count, synchronous output event) Clock source ********************* 1/1, 1/4 of system clock frequency; external clock input Interrupt source ***************** coincidence with compare register 2 Timer counter 3 : 8-bit x 1 (square-wave output, event count, generation of remote control carrier, serial 0 baud rate timer) Clock source ********************* 1/4, 1/16 of system clock frequency; 1/1 of OSC oscillation clock frequency; external clock input Interrupt source ***************** coincidence with compare register 3 Timer counter 2, 3 can be cascade-connected. Timer counter 4 : 16-bit x 1 (square-wave/16-bit PWM output, event count, synchronous output event, input capture) Clock source ********************* 1/4, 1/16 of system clock frequency; 1/1 of OSC oscillation clock frequency; external clock input Interrupt source ***************** coincidence with compare register 4 Time base timer (one-minute count setting, independently operable 8-bit timer counter 5) Clock source ********************* 1/4 of system clock frequency; 1/1, 1/8192 of OSC oscillation clock frequency Interrupt source ***************** coincidence with compare register 5; 1/8192 prescaler overflow Watchdog timer Interrupt source ***************** 1/1048576 of system clock frequency Interrupts Timer Counter MAD00052BEM 42 www..com MN101C94A Serial Interface I/O Pins I/O Input A/D Inputs Special Ports Electrical Characteristics Supply current Serial 0 : synchronous type/simple UART (half-duplex) x 1 Clock source ********************* 1/2, 1/4, 1/16 of system clock frequency; output of timer counter 3 26 11 * Common use: 17 * Specified pull-up resistor available * Input/output selectable (bit unit): 26 * Common use * Specified pull-up resistor available 10-bit x 8-ch. (with S/H) Buzzer output, remote control carrier signal output, high-current drive port Limit Parameter Symbol IDD1 Operating supply current Supply current at HALT Supply current at STOP IDD5 IDD2 IDD3 IDD4 Condition min fosc = 20 MHz, VDD = 5 V fosc = 8.39 MHz, VDD = 5 V ffosc = 8.39 MHz, VDD = 5 V, Ta = 25C VDD = 5 V, Ta = 25C VDD = 5 V, Ta = -40C to +85C ( typ 15 6 1.2 max 40 18 3 2 20(50) mA mA mA A A Unit ) : Flash memory built-in type Pin Assignment P63 P62 P61 P60 P22,IRQ2 P21,IRQ1 P20,IRQ0 P14,TMIO4 P13,TMIO3 P12,TMIO2 P11 P64 P65 P66 P67 P70 NRST,P27 MMOD LED7,P87 LED6,P86 LED5,P85 LED4,P84 33 32 31 30 29 28 27 26 25 24 23 MAD00052BEM LED3,P83 LED2,P82 LED1,P81 LED0,P80 AN0,PA0 AN1,PA1 AN2,PA2 AN3,PA3 AN4,PA4 AN5,PA5 AN6,PA6 1 2 3 4 5 6 7 8 9 10 11 34 35 36 37 38 39 40 41 42 43 44 MN101C94A 22 21 20 19 18 17 16 15 14 13 12 P10,RMOUT P06,BUZZER P02,SBT0 P01,SBI0,RXD P00,SBO0,TXD N.C. VSS OSC1 OSC2 VDD PA7,AN7 Q F P 0 4 4 - P - 1 0 1 0 F *Lead-free 43 www..com Support Tool In-circuit Emulator Flash memory Built-in Type PX-ICE101C/D+PX-PRB101C94-QFP044-P-1010 Type ROM (x 8-bit) RAM (x 8-bit) Minimum instruction execution time MN101CF94D [ES (Engineering Sample) available] 64 K 2K 0.10 s (at 4.5 V to 5.5 V, 20 MHz) 0.238 s (at 2.7 V to 5.5 V, 8.39 MHz) 0.477 s (at 2.5 V to 5.5 V, 4.19 MHz) Package QFP044-P-1010F *Lead-free MAD00052BEM 44 www..com MN101C94A MAD00052BEM 45 www..com MN101CF95F, MN101CF95G Type ROM (x 8-bit) x RAM (x 8-bit) x Package Minimum Instruction Execution Time Standard: MN101CF95F (under planning) 96K 4K TQFP080-P-1212D *Lead-free MN101CF95G (under development) 128K 6K 0.2 s (at 2.7 V to 3.6 V, 10 MHz)* 0.5 s (at 2.7 V to 3.6 V, 4 MHz)* 62.5 s (at 2.7 V to 3.6 V, 32 kHz)* Double speed: 0.1 s (at 2.7 V to 3.6 V, 10 MHz)* * RESET * Watchdog * External 0 * External 1 * External 2 * External 3 * External 4 * External 5 * Timer 0 * Timer 1 * Timer 2 * Timer 3 * Timer 4 * Timer 5 * Timer 6 * Timer 7 * Timer 8 * Time base * Serial 0 reception * Serial 0 transmission * Serial 1 reception * Serial 1 transmission * Serial 2 * Serial 3 * Serial 4 reception * Serial 4 transmission * Automatic transfer finish * A/D conversion finish * Key interrupts (12 lines) Timer counter 0: 8-bit x 1 (square-wave/8-bit PWM output, event count, pulse width measurement, serial clock output, real-time output control, generation of remote control carrier) Clock source ********************* 1/2, 1/4 of system clock frequency; 1/1, 1/4, 1/16, 1/32, 1/64 of OSC oscillation clock frequency; 1/1 of XI oscillation clock frequency; external clock input Interrupt source ***************** coincidence with compare register 0 Timer counter 1: 8-bit x 1 (square-wave output, event count, synchronous output event, serial clock output) Clock source ********************* 1/2, 1/8 of system clock frequency; 1/1, 1/4, 1/16, 1/64, 1/128 of OSC oscillation clock frequency; 1/1 of XI oscillation clock frequency; external clock input Interrupt source ***************** coincidence with compare register 1 Timer counter 0, 1 can be cascade-connected. Timer counter 2: 8-bit x 1 (square-wave output, PWM output, event count, pulse width measurement, synchronous timer, serial clock output) Clock source ********************* 1/2, 1/4 of system clock frequency; 1/1, 1/4, 1/16, 1/32, 1/64 of OSC oscillation clock frequency; 1/1 of XI oscillation clock frequency; external clock input Interrupt source ***************** coincidence with compare register 2 Timer counter 0, 1, 2 can be cascade-connected. Timer counter 3: 8-bit x 1 (square-wave output, event count, serial clock output) Clock source ********************* 1/2, 1/8 of system clock frequency; 1/1, 1/4, 1/16, 1/64, 1/128 of OSC oscillation clock frequency; 1/1 of XI oscillation clock frequency; external clock input Interrupt source ***************** coincidence with compare register 3 Timer counter 2, 3 can be cascade-connected. Timer counter 0, 1, 2, 3 can be cascade-connected. Timer counter 4: 8-bit x 1 (square-wave/8-bit PWM output, event count, pulse width measurement, real-time output control, serial clock output) Clock source ********************* 1/2, 1/4 of system clock frequency; 1/1, 1/4, 1/16, 1/32, 1/64 of OSC oscillation clock frequency; 1/1 of XI oscillation clock frequency; 1/1 of external clock input frequency Interrupt source ***************** coincidence with compare register 4 Interrupts Timer Counter MAD00053BEM 46 www..com MN101CF95F, MN101CF95G Timer Counter (Continue) Timer counter 5: 8-bit x 1 (square-wave/8-bit PWM output, event count, pulse width measurement, serial clock output) Clock source *********************** 1/2, 1/8 of system clock frequency; 1/1, 1/4, 1/16, 1/64, 1/128 of OSC oscillation clock frequency; 1/1 of XI oscillation clock frequency; external clock input Interrupt source ******************* coincidence with compare register 5 Timer counter 4, 5 can be cascade-connected. Timer counter 6: 8-bit freerun timer Clock source ********************* 1/1 of system clock frequency; 1/1, 1/128, 1/8192 of OSC oscillation clock frequency; 1/1, 1/128, 1/8192 of XI oscillation clock frequency Interrupt source ***************** coincidence with compare register 6 Timer counter 7: 16-bit x 1 (square-wave/16-bit PWM output, cycle / duty continuous variable, event count, synchronous output evevt, pulse width measurement, input capture, real-time output control) Clock source ********************* 1/1, 1/2, 1/4, 1/16 of system clock frequency; 1/1, 1/2, 1/4, 1/16 of OSC oscillation clock frequency; 1/1, 1/2, 1/4, 1/16 of external clock input frequency Interrupt source ***************** coincidence with compare register 7 (2 lines) Timer counter 8: 16-bit x 1 (square-wave output, PWM output (duty continuous variable), event count, pulse width measurement, input capture) Clock source ********************* 1/1, 1/2, 1/4, 1/16 of system clock frequency; 1/1, 1/2, 1/4, 1/16 of OSC oscillation clock frequency; 1/1, 1/2, 1/4, 1/16 of external clock input frequency Interrupt source ***************** coincidence with compare register 8 (2 lines) Time base timer (one-minute count setting) Clock source ********************* 1/1 of OSC oscillation clock frequency; 1/1 of XI oscillation clock frequency Interrupt source ***************** 1/128, 1/256, 1/512, 1/1024, 1/8192, 1/32768 of clock source frequency Watchdog timer Interrupt source ***************** 1/65536, 1/262144, 1/1048576 of system clock frequency DMA Controller (Automatic Data Transfer) Serial Interface Max. Transfer cycles: 255 Starting factor: various types of interrupt, software Transfer mode: 1-byte transfer, word transfer, burst transfer Serial 0: synchronous type / UART (full-duplex) x 1 Clock source ********************* 1/2, 1/4 of system clock frequency; pulse output of timer counter 1, 2; 1/2, 1/4, 1/16, 1/64 of OSC oscillation clock frequency Serial 1: synchronous type / UART (full-duplex) x 1 Clock source ********************* 1/2, 1/4 of system clock frequency; pulse output of timer counter 2, 3; 1/2, 1/4, 1/16, 1/64 of OSC oscillation clock frequency Serial 2: synchronous type / multi-master I 2C x 1 Clock source ********************* 1/2, 1/4 of system clock frequency; pulse output of timer counter 3, 4; 1/2, 1/4, 1/16, 1/32 of OSC oscillation clock frequency Serial 3: synchronous type / single-master I 2C x 1 Clock source ********************* 1/2, 1/4 of system clock frequency; pulse output of timer counter 4, 5; 1/2, 1/4, 1/16, 1/32 of OSC oscillation clock frequency Serial 4: synchronous type / UART (full-duplex) x 1 Clock source ********************* 1/2, 1/4 of system clock frequency; pulse output of timer counter 0, 5; 1/2, 1/4, 1/16, 1/64 of OSC oscillation clock frequency MAD00053BEM 47 www..com I/O Pins A/D Inputs Special Ports Pin Assignment I/O 67 * Common use * Specified pull-up resistor available * Input/output selectable (bit unit) 10-bit x 11-ch. (with S/H) Buzzer output, remote control carrier signal output, high-current drive port P70 / SDO0 / SBO1B P72 / SDO2 / SBT1B P71 / SDO1 / SBI1B P74 / SDO4 / TM7B 60 59 58 57 56 55 54 53 52 51 50 49 48 47 46 45 44 43 42 41 P53 / TM0A / RMC P54 / TM1 / TM0B P75 / SDO5 / TM8 P43 / KEY11 P42 / KEY10 P41 / KEY9 P40 / KEY8 P67 / KEY7 P66 / KEY6 P65 / KEY5 P64 / KEY4 P63 / KEY3 P62 / KEY2 P61 / KEY1 P60 / KEY0 P73 / SDO3 P76 / SDO6 / TM4 P77 / SDO7 / TM5 P87 / LED7 P86 / LED6 P85 / LED5 / SBO0A P84 / LED4 / SBI0A P83 / LED3 / SBT0A P82 / LED2 P81 / LED1 P80 / LED0 P44 / KEY12 P45 / KEY13 P46 / KEY14 P47 / KEY15 VREFPA0 / AN0 PA1 / AN1 PA2 / AN2 PA3 / AN3 PA4 / AN4 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 10 11 12 13 14 15 16 17 18 19 20 1 2 3 4 5 6 7 8 9 40 39 38 37 36 35 34 33 32 31 TM7A / IRQ5 / P25 IRQ4 / P24 IRQ3 / P23 IRQ2 / P22 IRQ1 / P21 IRQ0 / P20 P36 SBT4 / P35 SBI4 / P34 SBO4 / P33 TM3 / P32 TM2B / P31 TM2A / P30 SBT0B / SBT2 / P15 SBI0B / SBI2 / P14 SBO0B / SBO2 / P13 SBT1A / P12 SBI1A / P11 SBO1A / P10 BUZ / SBT3 / P02 MN101CF95F MN101CF95G 30 29 28 27 26 25 24 23 22 21 AN10 / PB2 AN11 / PB3 MMOD DMOD VREF+ VPP OSC2 OSC1 VSS XI XO P27 / NRST SBO3 / P00 AN5 / PA5 AN6 / PA6 AN8 / PB0 AN9 / PB1 TQFP080-P-1212D *Lead-free Support Tool In-circuit Emulator PX-ICE101C/D+PX-PRB101C95-TQFP080-P-1212D SBI3 / P01 VDD33 VDD18 MAD00053BEM 48 www..com MN101CF95F, MN101CF95G MAD00053BEM 49 www..com MN101CF96D, MN101CF96F Type ROM (x 8-bit) x RAM (x 8-bit) x Package Minimum Instruction Execution Time Standard: MN101CF96D (under planning) 64K 3K LQFP064-P-1414 *Lead-free MN101CF96F (under planning) 96K 6K 0.2 s (at 2.7 V to 3.6 V, 10 MHz)* 0.5 s (at 2.7 V to 3.6 V, 4 MHz)* 62.5 s (at 2.7 V to 3.6 V, 32 kHz)* Double speed: 0.1 s (at 2.7 V to 3.6 V, 10 MHz)* * RESET * Watchdog * External 0 * External 1 * External 2 * External 3 * External 4 * External 5 * Timer 0 * Timer 1 * Timer 2 * Timer 3 * Timer 4 * Timer 5 * Timer 6 * Timer 7 * Timer 8 * Time base * Serial 0 reception * Serial 0 transmission * Serial 1 reception * Serial 1 transmission * Serial 2 * Serial 3 * Automatic transfer finish * A/D conversion finish * Key interrupts (8 lines) Timer counter 0: 8-bit x 1 (square-wave/8-bit PWM output, event count, pulse width measurement, serial clock output, real-time output control, generation of remote control carrier) Clock source ********************* 1/2, 1/4 of system clock frequency; 1/1, 1/4, 1/16, 1/32, 1/64 of OSC oscillation clock frequency; 1/1 of XI oscillation clock frequency; external clock input Interrupt source ***************** coincidence with compare register 0 Timer counter 1: 8-bit x 1 (square-wave output, event count, synchronous output event, serial clock output) Clock source ********************* 1/2, 1/8 of system clock frequency; 1/1, 1/4, 1/16, 1/64, 1/128 of OSC oscillation clock frequency; 1/1 of XI oscillation clock frequency; external clock input Interrupt source ***************** coincidence with compare register 1 Timer counter 0, 1 can be cascade-connected. Timer counter 2: 8-bit x 1 (square-wave output, PWM output, event count, pulse width measurement, synchronous timer, serial clock output) Clock source ********************* 1/2, 1/4 of system clock frequency; 1/1, 1/4, 1/16, 1/32, 1/64 of OSC oscillation clock frequency; 1/1 of XI oscillation clock frequency; external clock input Interrupt source ***************** coincidence with compare register 2 Timer counter 0, 1, 2 can be cascade-connected. Timer counter 3: 8-bit x 1 (square-wave output, event count, serial clock output) Clock source ********************* 1/2, 1/8 of system clock frequency; 1/1, 1/4, 1/16, 1/64, 1/128 of OSC oscillation clock frequency; 1/1 of XI oscillation clock frequency; external clock input Interrupt source ***************** coincidence with compare register 3 Timer counter 2, 3 can be cascade-connected. Timer counter 0, 1, 2, 3 can be cascade-connected. Timer counter 4: 8-bit x 1 (square-wave/8-bit PWM output, event count, pulse width measurement, real-time output control, serial clock output) Clock source ********************* 1/2, 1/4 of system clock frequency; 1/1, 1/4, 1/16, 1/32, 1/64 of OSC oscillation clock frequency; 1/1 of XI oscillation clock frequency; 1/1 of external clock input frequency Interrupt source ***************** coincidence with compare register 4 Interrupts Timer Counter MAD00054BEM 50 www..com MN101CF96D MN101CF96F Timer Counter (Continue) Timer counter 5: 8-bit x 1 (square-wave/8-bit PWM output, event count, pulse width measurement, serial clock output) Clock source *********************** 1/2, 1/8 of system clock frequency; 1/1, 1/4, 1/16, 1/64, 1/128 of OSC oscillation clock frequency; 1/1 of XI oscillation clock frequency; external clock input Interrupt source ******************* coincidence with compare register 5 Timer counter 4, 5 can be cascade-connected. Timer counter 6: 8-bit freerun timer Clock source ********************* 1/1 of system clock frequency; 1/1, 1/128, 1/8192 of OSC oscillation clock frequency; 1/1, 1/128, 1/8192 of XI oscillation clock frequency Interrupt source ***************** coincidence with compare register 6 Timer counter 7: 16-bit x 1 (square-wave/16-bit PWM output, cycle / duty continuous variable, event count, synchronous output evevt, pulse width measurement, input capture, real-time output control) Clock source ********************* 1/1, 1/2, 1/4, 1/16 of system clock frequency; 1/1, 1/2, 1/4, 1/16 of OSC oscillation clock frequency; 1/1, 1/2, 1/4, 1/16 of external clock input frequency Interrupt source ***************** coincidence with compare register 7 (2 lines) Timer counter 8: 16-bit x 1 (square-wave output, PWM output (duty continuous variable), event count, pulse width measurement, input capture) Clock source ********************* 1/1, 1/2, 1/4, 1/16 of system clock frequency; 1/1, 1/2, 1/4, 1/16 of OSC oscillation clock frequency; 1/1, 1/2, 1/4, 1/16 of external clock input frequency Interrupt source ***************** coincidence with compare register 8 (2 lines) Time base timer (one-minute count setting) Clock source ********************* 1/1 of OSC oscillation clock frequency; 1/1 of XI oscillation clock frequency Interrupt source ***************** 1/128, 1/256, 1/512, 1/1024, 1/8192, 1/32768 of clock source frequency Watchdog timer Interrupt source ***************** 1/65536, 1/262144, 1/1048576 of system clock frequency DMA Controller (Automatic Data Transfer) Serial Interface Max. Transfer cycles: 255 Starting factor: various types of interrupt, software Transfer mode: 1-byte transfer, word transfer, burst transfer Serial 0: synchronous type / UART (full-duplex) x 1 Clock source ********************* 1/2, 1/4 of system clock frequency; pulse output of timer counter 1, 2; 1/2, 1/4, 1/16, 1/64 of OSC oscillation clock frequency Serial 1: synchronous type / UART (full-duplex) x 1 Clock source ********************* 1/2, 1/4 of system clock frequency; pulse output of timer counter 2, 3; 1/2, 1/4, 1/16, 1/64 of OSC oscillation clock frequency Serial 2: synchronous type / multi-master I 2C x 1 Clock source ********************* 1/2, 1/4 of system clock frequency; pulse output of timer counter 3, 4; 1/2, 1/4, 1/16, 1/32 of OSC oscillation clock frequency Serial 3: synchronous type / single-master I 2C x 1 Clock source ********************* 1/2, 1/4 of system clock frequency; pulse output of timer counter 4, 5; 1/2, 1/4, 1/16, 1/32 of OSC oscillation clock frequency MAD00054BEM 51 www..com I/O Pins A/D Inputs Special Ports Pin Assignment I/O 51 * Common use * Specified pull-up resistor available * Input/output selectable (bit unit) 10-bit x 7-ch. (with S/H) Buzzer output, remote control carrier signal output, high-current drive port P70 / SDO0 / SBO1B P72 / SDO2 / SBT1B P71 / SDO1 / SBI1B P74 / SDO4 / TM7B 48 47 46 45 44 43 42 41 40 39 38 37 36 35 34 TM4 / SDO6 / P76 TM5 / SDO7 / P77 LED7 / P87 LED6 / P86 SBO0A / LED5 / P85 SBI0A / LED4 / P84 SBT0A / LED3 / P83 LED2 / P82 LED1 / P81 LED0 / P80 VREFAN0 / PA0 AN1 / PA1 AN2 / PA2 AN3 / PA3 AN4 / PA4 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 33 P53 / TM0A / RMC P54 / TM1 / TM0B P75 / SDO5 / TM8 P67 / KEY7 P66 / KEY6 P65 / KEY5 P64 / KEY4 P63 / KEY3 P62 / KEY2 P61 / KEY1 P60 / KEY0 P73 / SDO3 32 31 30 29 28 27 26 P25 / IRQ5 / TM7A P24 / IRQ4 P23 / IRQ3 P22 / IRQ2 P21 / IRQ1 P20 / IRQ0 P32 / TM3 P31 / TM2B P30 / TM2A P15 / SBT2 / SBT0B P14 / SBI2 / SBI0B P13 / SBO2 / SBO0B P12 / SBT1A P11 / SBI1A P10 / SBO1A P02 / SBT3 / BUZ MN101CF96D MN101CF96F 25 24 23 22 21 20 19 18 17 10 11 12 13 14 15 SBO3 / P00 AN5 / PA5 AN6 / PA6 AN7 / PA7 LQFP064-P-1414 *Lead-free Support Tool In-circuit Emulator PX-ICE101C/D+PX-PRB101C96-LQFP064-P-1414 P27 / NRST SBI3 / P01 XI VPP VSS XO MMOD OSC2 VREF+ VDD33 VDD18 OSC1 16 1 2 3 4 5 6 7 8 9 MAD00054BEM 52 www..com MN101CF96D, MN101CF96F MAD00054BEM 53 www..com MN101C97A, MN101C97D Type ROM (x 8-bit) x RAM (x 8-bit) x Package Minimum Instruction Execution Time MN101C97A (under development) 32 K 1.0 K 0.25 s (at 2.2 V to 3.6 V, 8 MHz) 0.5 s (at 1.8 V to 3.6 V, 4 MHz) 62.5 s (at 1.8 V to 3.6 V, 32 kHz) * The lower limit for operation guarantee for flash memory built-in type is 2.2 V. * RESET * Watchdog * External 0 * External 1 * External 2 * External 3 * External 4 * External 5 * External 6 (key interrupt dedicated) * Timer 0 * Timer 1 * Timer 2 * Timer 3 * Timer 6 * Time base * Timer 7 (2 systems) * Serial 0 (2 systems) * Serial 3 * A/D conversion finish Timer counter 0 : 8-bit x 1 (square-wave/8-bit PWM output, event count, generation of remote control carrier, simple pulse width measurement, added pluse (2-bit) system PWM output) (square-wave/PWM output to large current terminal P51 possible) Clock source ********************* 1/2, 1/4 of system clock frequency; 1/1, 1/4, 1/16, 1/32, 1/64 of OSC oscillation clock frequency; 1/1 of XI oscillation clock frequency; external clock input Interrupt source ***************** coincidence with compare register 0 Timer counter 1 : 8-bit x 1 (square-wave output, event count, synchronous output event) Clock source ********************* 1/2, 1/8 of system clock frequency; 1/1, 1/4, 1/16, 1/64, 1/128 of OSC oscillation clock frequency; 1/1 of XI oscillation clock frequency; external clock input Interrupt source ***************** coincidence with compare register 1 Timer counter 0, 1 can be cascade-connected. Timer counter 2 : 8-bit x 1 (square-wave output, added pluse (2-bit) system PWM output, PWM output, serial transfer clock output, event count, synchronous output event, simple pulse width measurement) (square-wave/PWM output to large current terminal P52 possible) Clock source ********************* 1/2, 1/4 of system clock frequency; 1/1, 1/4, 1/16, 1/32, 1/64 of OSC oscillation clock frequency; 1/1 of XI oscillation clock frequency; external clock input Interrupt source ***************** coincidence with compare register 2 Timer counter 3 : 8-bit x 1 (square-wave output, event count, generation of remote control carrier, serial transfer clock) Clock source ********************* 1/2, 1/8 of system clock frequency; 1/1, 1/4, 1/16, 1/64, 1/128 of OSC oscillation clock frequency; 1/1 of XI oscillation clock frequency; external clock input Interrupt source ***************** coincidence with compare register 3 Timer counter 2, 3 can be cascade-connected. Timer counter 6 : 8-bit freerun timer Clock source ********************* 1/1 of system clock frequency; 1/1, 1/128, 1/8192 of OSC oscillation clock frequency; 1/1, 1/128, 1/8192 of XI oscillation clock frequency Interrupt source ***************** coincidence with compare register 6 Timer counter 7 : 16-bit x 1 (square-wave output, 16-bit PWM output (cycle / duty continuous variable), event count, synchronous output event, pulse width measurement, input capture, real time output control, high performance IGBT output) (square-wave/ PWM output to large current terminal P53 possible) Clock source ********************* 1/1, 1/2, 1/4, 1/16 of system clock frequency; 1/1, 1/2, 1/4, 1/16 of OSC oscillation clock frequency; 1/1, 1/2, 1/4, 1/16 of external clock input frequency Interrupt source ***************** coincidence with compare register 7 (2 lines), input capture register MN101C97D (under development) 64 K 1K TQFP048-P-0707B *Lead-free (under development), QFP044-P-1010F *Lead-free (under planning), QFN044-P-0606A *Lead-free (under planning) Interrupts Timer Counter MAD00058AEM 54 www..com MN101C97A, MN101C97D Timer Counter (Continue) Timer counters 7, 8 can be cascade-connected. (square-wave output, PWM input capture, pluse width measurement is possible as a 32-bit timer.) Time base timer (one-minute count setting) Clock source ********************* 1/1 of OSC oscillation clock frequency; 1/1 of XI oscillation clock frequency Interrupt source ***************** 1/128, 1/256, 1/512, 1/1024, 1/4096, 1/8192, 1/16384, 1/32768, of clock source frequency Watchdog timer Interrupt source ***************** 1/65536, 1/262144, 1/1048576 of system clock frequency Serial Interface Serial 0 : synchronous type/UART (full-duplex) x 1 Clock source ********************* 1/2, 1/4 of system clock frequency; pulse output of timer counter 1 or 2; 1/2, 1/4, 1/16, 1/64 of OSC oscillation clock frequency, external clock Serial 3 : synchronous type/single-master I2C x 1 Clock source ********************* 1/2, 1/4 of system clock frequency; pulse output of timer counter 2 or 3; 1/2, 1/4, 1/16, 1/32 of OSC oscillation clock frequency, external clock I/O Pins A/D Inputs Special Ports ROM Correction I/O 38 * Common use * Specified pull-up resistor available * Input/output selectable (bit unit) 10-bit x 8-ch. (with S/H) Buzzer output, remote control carrier signal output, high-current drive port Correcting address designation: up to 3 addresses possible Electrical Characteristics Supply current Limit Parameter Symbol IDD1 Operating supply current IDD2 IDD3 Supply current at HALT IDD4 IDD5 Supply current at STOP IDD6 Condition min fosc = 4 MHz, VDD = 3 V fx = 32 kHz, VDD = 3 V fx = 32 kHz, VDD = 3 V, Ta = 25C fx = 32 kHz, VDD = 3 V, Ta = -40C to +85C VDD = 3 V, Ta = 25C VDD = 3 V, Ta = -40C to +85C typ 1 4 2 max 2.2 15 10 40 2 30 mA A A A A A Unit See the next page for pin assignment and support tool. MAD00058AEM 55 www..com Pin Assignment P11/TXD0A/SBO0A 26 P25/IRQ5/CLKOUT P10/RXD0A/SBI0A 25 P31/KEY1/TM1IO P30/KEY0/TM0IO P12/SBT0A 27 P24/IRQ4 P23/IRQ3 P22/IRQ2 P21/IRQ1 P20/IRQ0 29 36 35 34 33 32 31 30 P32/ KEY2/TM2IO P33/KEY3/TM3IO P34/KEY4/TM7IO P35/KEY5/NBUZZER P36/KEY6/BUZZER P37/KEY7 P40/SBI3 P41/SBO3/SDA3 P42/SBT3/SCL3 P43/RXD0B/SBI0B P44//TXD0B/SBO0B P45/SBT0B 37 38 39 40 41 42 43 44 45 46 47 48 10 11 12 28 P13 24 23 22 21 20 AN7/P07 AN6/P06 AN5/P05 AN4/P04 AN3/P03 AN2/P02 AN1/P01 AN0/P00 Vref+ LED4/P54 TM7O/LED3/P53 TM2O/LED2/P52 MN101C97A MN101C97D 19 18 17 16 15 14 13 1 2 3 4 5 6 7 8 MMOD VDD 9 RMOUT/LED0/P50 TQFP048-P-0707B *Lead-free QFP044-P-1010F *Lead-free QFN044-P-0606A *Lead-free Support Tool In-circuit Emulator Flash Memory Built-in Type PX-ICE101C / D + PX-PRB101C97-TQFP048-P-0707B-M (under development) PX-ICE101C / D + PX-PRB101C97-QFP044-P-1010 (under planning) Type ROM (x 8-bit) RAM (x 8-bit) Minimum instruction execution time MN101CF97D 64 K 1K 0.250 s (at 2.2 V to 3.6 V, 8.0 MHz) 0.500 s (at 2.2 V to 3.6 V, 4 MHz) 62.5 s (at 2.2 V to 3.6 V, 32 kHz) Package TQFP048-P-0707B *Lead-free (under development) QFP044-P-1010F *Lead-free (under planning) QFN044-P-0606A *Lead-free (under planning) TM0O/LED1/P51 DMOD XO NRST/P27 XI OSC1 OSC2 VSS LED5/P55 MAD00058AEM 56 www..com MN101C97A, MN101C97D MAD00058AEM 57 www..com MN101E16K, MN101E16M Type ROM (x 8-bit) x External memory can be expanded MN101E16K (under planning) 256 K MN101E16M 384 K RAM (x 8-bit) x External memory can be expanded 12 K 20 K Package Minimum Instruction Execution Time Interrupts QFP100-P-1818B *Lead-free 0.0588 s (at 2.7 V to 3.6 V, 17 MHz at internal 2,4,8 times oscillation used) 0.1 s (at 2.7 V to 3.6 V, 20 MHz) 30.6 s (at 2.7 V to 3.6 V, 32.768 kHz) * RESET * Watchdog * External 0 * External 1 * External 2 * External 3 * External 4 * External 5 * Timer 0 * Timer 1 * Timer 2 * Timer 3 * Timer 4 * Timer 5 * Timer 6 * Timer 7 (2 systems) * Timer A, B, C, D, E * Time base * Serial 0 (2 systems) * Serial 1 (2 systems) * Serial 2 * Serial 3 (2 systems) * Serial 4 (2 systems) * Automatic transfer finish (2 systems) * A/D conversion finish * Key interrupts Timer counter 0 : 8-bit x 1 (square-wave/8-bit PWM output, event count, simple pulse width measurement, real time output control) Clock source ********************* 1/2, 1/4 of system clock frequency; 1/1, 1/4, 1/16, 1/32, 1/64 of OSC oscillation clock frequency; 1/1 of XI oscillation clock frequency; external clock input Interrupt source ***************** coincidence with compare register 0 Timer counter 1 : 8-bit x 1 (square-wave output, event count, synchronous output event, 16-bit timer with casscade connection (Timer 0 and connection), serial clocke output) Clock source ********************* 1/2, 1/8 of system clock frequency 1/1, 1/4, 1/16, 1/64, 1/128 of OSC oscillation clock frequency; 1/1 of XI oscillation clock frequency; external clock input Interrupt source ***************** coincidence with compare register 1 Timer counter 0, 1 can be cascade-connected. Timer counter 2 : 8-bit x 1 (square-wave/8-bit PWM output, event count, synchronous output event, pulse width measurement, real time output control, serial baud rate timer) Clock source ********************* 1/2, 1/4 of system clock frequency; 1/1, 1/4, 1/16, 1/32, 1/64 of OSC oscillation clock frequency; 1/1 of XI oscillation clock frequency; external clock input Interrupt source ***************** coincidence with compare register 2 Timer counter 0, 1, 2 can be cascade-connected. Timer counter 3 : 8-bit x 1 (square-wave output, event count, serial baud rate timer) Clock source ********************* 1/2, 1/8 of system clock frequency; 1/1, 1/4, 1/16, 1/64, 1/128 of OSC oscillation clock frequency; 1/1 of XI oscillation clock frequency; external clock input Interrupt source ***************** coincidence with compare register 3 Timer counter 2, 3 can be cascade-connected. Timer counter 0, 1, 2, 3 can be cascade-connected. Timer counter 6 : 8-bit freerun timer , time base timer Clock source ********************* 1/1 of system clock frequency; 1/1, 1/4096, 1/8192 of OSC oscillation clock frequency; 1/1, 1/4096, 1/8192 of XI oscillation clock frequency Interrupt generating cycle *** 1/128, 1/256, 1/512, 1/1024, 1/8192 1/32768 of OSC oscillation clock frequency 1/128, 1/256, 1/512, 1/1024, 1/8192, 1/32768 of XI oscillation clock frequency Interrupt source ***************** coincidence with compare register 6 Timer Counter MAD00046CEM 58 www..com MN101E16K, MN101E16M Timer Counter (Continue) Timer counter 7 : 16-bit x 1 (square-wave/16-bit PWM output, cycle / duty continuous variable, event count, synchronous output evevt, pulse width measurement, input capture) Clock source ********************* 1/1, 1/2, 1/4, 1/16 of system clock frequency; 1/1, 1/2, 1/4, 1/16 of OSC oscillation clock frequency; 1/1, 1/2, 1/4, 1/16 of external clock input frequency Interrupt source ***************** coincidence with compare register 7 (2 lines) Timer counter A, B, C, D, E : 8-bit x 5 Clock source ********************* 1/2, 1/4 of system clock frequency; 1/1, 1/2, 1/4, 1/8, 1/16. 1/32 of OSC oscillation clock frequency Interrupt source ***************** coincidence with compare register A, B, C, D, E Time base timer (one-minute count setting) Clock source ********************* 1/1 of OSC oscillation clock frequency; 1/1 of XI oscillation clock frequency Interrupt source ***************** 1/128, 1/256, 1/512, 1/1024, 1/8192, 1/32768 of clock source frequency Watchdog timer Interrupt source ***************** 1/65536, 1/262144, 1/1048576, 1/4194304 of system clock frequency DMA Controller (Automatic Data Transfer) Nomber of channels : 2 Max. Transfer cycles : 255 Starting factor : external request, various types of interrupt, software Transfer mode : 1-byte transfer, word transfer, burst transfer Serial 0 : synchronous type/UART (full-duplex) x 1 Clock source ********************* 1/2, 1/4 of system clock frequency; pulse output of timer counter 2, A; 1/2, 1/4, 1/16, 1/64 of OSC oscillation clock frequency Serial 1 : synchronous type/UART (full-duplex) x 1 Clock source ********************* 1/2, 1/4 of system clock frequency; pulse output of timer counter 3, B; 1/2, 1/4, 1/8, 1/16, 1/64 of OSC oscillation clock frequency Serial 2 : synchronous type/single-master I2Cx 1 Clock source ********************* 1/2, 1/4 of system clock frequency; pulse output of timer counter 3, C; 1/2, 1/4, 1/16, 1/32 of OSC oscillation clock frequency Serial 3 : synchronous type/ I2C x 1 Clock source ********************* 1/2, 1/4 of system clock frequency; pulse output of timer counter 2, D; 1/2, 1/4, 1/16, 1/32 of OSC oscillation clock frequency Serial 4 : synchronous type/UART (full-duplex) x 1 Clock source ********************* 1/2, 1/4 of system clock frequency; pulse output of timer counter 2, E ; 1/2, 1/4, 1/16, 1/64 of OSC oscillation clock frequency Serial Interface I/O Pins I/O 22 62 1 * (5 V IF port) Common use * Specified pull-up resistor available * Input/output selectable (bit unit) * (3 V IF port) Common use * Specified pull-up resistor available * Input/output selectable (bit unit) * (3 V IF port) Common use A/D Inputs Special Ports Electrical Characteristics Supply current ROM Correction 10-bit x 8-ch. (with S/H) Buzzer output, high-current drive port T.B.D Correcting address designation: up to 7 addresses possible See the next page for electrical characteristics, pin assignment and support tool. MAD00046CEM 59 www..com Pin Assignment P43 P42 / SBT4 P41/SBI4/RXD4 P40/SBO4/TXD4 P87/LED7/D7 P86/LED6/D6 P85/LED5/D5 P84/LED4/D4 P83/LED3/D3 P82/LED2/D2 P81/LED1/D1 P80/LED0/D0 VSS P77/SD7/NDK P76/SD6/NWE P75/SD5/NRE P74/SD4/NCS P73/SD3/A19 P72/SD2/A18 P71/SD1/A17 P70/SD0/A16 P67/KEY7/A15 P66/KEY6/A14 P65/KEY5/A13 P64/KEY4/A12 75 74 73 72 71 70 69 68 67 66 65 64 63 62 61 60 59 58 57 56 55 54 53 52 SBO0B/TXD0B/P90 SBI0B/ RXD0B/P91 SBT0B/P92 SBO3B/SDA3B/P93 SBI3B/P94 SBT3B/SCL3B/P95 SBO2B/SDA2B/PD0 SBI2B/PD1 SBT2B/SCL2B/PD2 IRQ0B/PD3 IRQ1B/PD4 IRQ2B/PD5 IRQ3B/PD6 VDD5 PD7 VSS AN0/PA0 AN1/PA1 AN2/PA2 AN3/PA3 AN4/PA4 AN5/PA5 AN6/PA6 AN7/PA7 VREF+ VDD5 = 2.7 V to 5.5 V 51 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96 97 98 99 100 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 1 2 3 4 5 6 7 8 9 50 49 48 47 46 45 44 43 42 41 40 MN101E16K MN101E16M 39 38 37 36 35 34 33 32 31 30 29 28 27 26 25 P63/KEY3/A11 P62/KEY2/A10 P61/KEY1/A9 P60/KEY0 / A8 P57/A7 P56/A6 P55/A5 P54/A4 P53/A3 P52/A2 P51/A1 VSS P50/A0 N.C. (VDD18 ) P35/SBT3A/SCL3A P34/SBI3 P33/SBO3A/SDA3A P32/SBT1 P31/SBI1/RXD1 P30/SBO1/TXD1 P25/IRQ5 P24/IRQ4 P23/IRQ3A P22/IRQ2A P21/IRQ1A SBO0A/TXD0A/P00 SBI0A/RXD0A/P01 SBT0A/P02 SBO2A/SDA2A/P03 SBI2A/P04 SBT2A/SCL2A/P05 BUZZER/P06 TM0IO/P10 TM1IO/P11 TM2IO/P12 MMOD OSC2 OSC1 VSS XI XO VDD33 N.C. (VDD18) NRST/P27 TM3IO/P13 TM7IOA/P14 TM7OB/P15 TM7OC/P16 SYSCLK/P17 IRQ0A/P20 VDD33 = 2.7 V to 3.6 V QFP100-P-1818B *Lead-free LQFP100-P-1414 *Lead-free ( ): Flash memory built-in type Support Tool In-circuit Emulator Flash Memory Built-in Type Under development Type ROM (x 8-bit) RAM (x 8-bit) Minimum instruction execution time Package MN101EF16N [ES (Engineering Sample) available] 512 K 30 K 0.0588 s (at 2.7 V to 3.6 V, 17 MHz) QFP100-P-1818B *Lead-free, LQFP100-P-1414 *Lead-free MAD00046CEM 60 www..com MN101E16K, MN101E16M MAD00046CEM 61 www..com MN101C49G , MN101C49H , MN101C49K Type ROM (x 8-bit) x External memory can be expanded MN101C49G 128 K MN101C49H 160 K MN101C49K 224 K RAM (x 8-bit) x External memory can be expanded 4K 6K 10 K Package Minimum Instruction Execution Time QFP100-P-1818B *Lead-free, LQFP100-P-1414 *Lead-free 0.10 s (at 4.5 V to 5.5 V, 20 MHz) 0.238 s (at 2.7 V to 5.5 V, 8.39 MHz) 125 s (at 2.0 V to 5.5 V, 32 kHz)* Double speed: 0.12 s (at 4.5 V to 5.5 V, 8.39 MHz) 0.25 s (at 3.0 V to 5.5 V, 4 MHz) 62.5 s (at 2.0 V to 5.5 V, 32 kHz)* * The lower limit for operation guarantee for EPROM built-in type is 2.7 V. * The lower limit for operation guarantee for flash memory built-in type is 4.5 V. Standard: * RESET * Watchdog * External 0 * External 1 * External 2 * External 3 * External 4 * External 5 * Timer 0 * Timer 1 * Timer 2 * Timer 3 * Timer 4 * Timer 6 * Timer 7 (2 systems) * Time base * Serial 0 * Serial 1 * Serial 2 * Serial 3 * Automatic transfer finish * A/D conversion finish * Key interrupts (8 lines) Timer counter 0 : 8-bit x 1 (square-wave/8-bit PWM output, event count, generation of remote control carrier, pulse width measurement) Clock source ********************* 1/2, 1/4 of system clock frequency; 1/1, 1/4, 1/16, 1/32, 1/64 of OSC oscillation clock frequency; 1/1 of XI oscillation clock frequency; external clock input Interrupt source **************** coincidence with compare register 0 Timer counter 1 : 8-bit x 1 (square-wave output, event count, synchronous output event) Clock source ********************* 1/2, 1/8 of system clock frequency; 1/1, 1/4, 1/16, 1/64, 1/128 of OSC oscillation clock frequency; 1/1 of XI oscillation clock frequency; external clock input Interrupt source **************** coincidence with compare register 1 Timer counter 0, 1 can be cascade-connected. Timer counter 2 : 8-bit x 1 (square-wave/8-bit PWM output, event count, synchronous output event, pulse width measurement) Clock source ********************* 1/2, 1/4 of system clock frequency; 1/1, 1/4, 1/16, 1/32, 1/64 of OSC oscillation clock frequency; 1/1 of XI oscillation clock frequency; external clock input Interrupt source **************** coincidence with compare register 2 Timer counter 3 : 8-bit x 1 (square-wave output, event count, generation of remote control carrier) Clock source ********************* 1/2, 1/8 of system clock frequency; 1/1, 1/4, 1/16, 1/64, 1/128 of OSC oscillation clock frequency; 1/1 of XI oscillation clock frequency; external clock input Interrupt source **************** coincidence with compare register 3 Timer counter 2, 3 can be cascade-connected. Timer counter 4 : 8-bit x 1 (square-wave/8-bit PWM output, event count, pulse width measurement, serial 1 baud rate timer) Clock source ********************* 1/2, 1/4 of system clock frequency; 1/1, 1/4, 1/16, 1/32, 1/64 of OSC oscillation clock frequency; 1/1 of XI oscillation clock frequency; 1/1 of external clock input frequency Interrupt source **************** coincidence with compare register 4 Timer counter 6 : 8-bit freerun timer Clock source ********************* 1/1 of system clock frequency; 1/1, 1/4096, 1/8192 of OSC oscillation clock frequency; 1/1, 1/4096, 1/8192 of XI oscillation clock frequency Interrupt source **************** coincidence with compare register 6 MAD00011GEM Interrupts Timer Counter 62 www..com MN101C49G , MN101C49H , MN101C49K Timer Counter (Continue) Timer counter 7 : 16-bit x 1 (square-wave/16-bit PWM output, cycle / duty continuous variable, event count, synchronous output evevt, pulse width measurement, input capture) Clock source ********************* 1/1, 1/2, 1/4, 1/16 of system clock frequency; 1/1, 1/2, 1/4, 1/16 of OSC oscillation clock frequency; 1/1, 1/2, 1/4, 1/16 of external clock input frequency Interrupt source **************** coincidence with compare register 7 (2 lines) Time base timer (one-minute count setting) Clock source ********************* 1/1 of OSC oscillation clock frequency; 1/1 of XI oscillation clock frequency Interrupt source **************** 1/128, 1/256, 1/512, 1/1024, 1/8192, 1/32768 of clock source frequency Watchdog timer Interrupt source **************** 1/65536, 1/262144, 1/1048576 of system clock frequency DMA Controller (Automatic Data Transfer) Serial Interface Max. Transfer cycles : 255 Starting factor : external request, various types of interrupt, software Transfer mode : 1-byte transfer, word transfer, burst transfer Serial 0 : synchronous type/UART (full-duplex) x 1 Clock source ********************* 1/2, 1/4 of system clock frequency; pulse output of timer counter 2, 4; 1/2, 1/4, 1/16, 1/64 of OSC oscillation clock frequency Serial 1 : synchronous type/simple UART (half-duplex) x 1 Clock source ********************* 1/2, 1/4 of system clock frequency; pulse output of timer counter 4; 1/2, 1/4, 1/16, 1/64 of OSC oscillation clock frequency Serial 2 : synchronous type x 1 Clock source ********************* 1/2, 1/4 of system clock frequency; pulse output of timer counter 3; 1/2, 1/4, 1/16, 1/32 of OSC oscillation clock frequency Serial 3 : synchronous type/single-master I 2C x 1 Clock source ********************* 1/2, 1/4 of system clock frequency; pulse output of timer counter 3; 1/2, 1/4, 1/16, 1/32 of OSC oscillation clock frequency I/O Pins I/O Input 73 (72) 15 (14) * Common use * Specified pull-up resistor available * Input/output selectable (bit unit) ( ) : Flash memory built-in type. * Common use * Specified pull-up resistor available ( ) : Flash memory built-in type. A/D Inputs D/A Outputs Special Ports ROM Correction 10-bit x 8-ch. (with S/H) 8-bit x 4-ch. Buzzer output, remote control carrier signal output, high-current drive port Correcting address designation: up to 3 addresses possible See the next page for electrical characteristics, pin assignment and support tool. MAD00011GEM 63 www..com Electrical Characteristics Supply current Limit Parameter Symbol IDD1 Operating supply current IDD2 IDD3 Supply current at HALT IDD4 IDD5 Supply current at STOP IDD6 IDD7 Condition min fosc = 20 MHz, VDD = 5 V fosc = 8.39 MHz, VDD = 5 V fx = 32.768 kHz, VDD = 3 V fx = 32 kHz, VDD = 3 V (5 V), Ta = 25C fx = 32.768 kHz, VDD = 3 V (5 V), Ta = 85C VDD = 5 V, Ta = 25C VDD = 5 V, Ta = 85C typ 30 15 40 max 70 30 120 mA mA A A A A A Unit 5 (13) 11 (30) 30 (90) 3 60 ( ) : Flash memory built-in type. Pin Assignment P74/A12 P73/A11 P72/A10 P71/A9 P70/A8 P67/A7 P66/A6 P65/A5 P64/A4 P63/A3 P62/A2 P61/A1 P60/A0 P54/A17 P53/A16 P52/NCS P51/NRE P50/NWE P47/KEY7 P46/KEY6 P45/KEY5 P44/KEY4 P43/KEY3 P42/KEY2 P41/KEY1 VREFAN0/PA0 AN1/PA1 AN2/PA2 AN3/PA3 AN4/PA4 AN5/PA5 AN6/PA6 AN7/PA7 VREF+ VDD OSC2 OSC1 VSS XI XO MMOD SBO0/P00 SBI0/P01 SBT0/P02 SBO2/P03 SBI2/P04 SBT2/P05 NDK/BUZZER/P06 SYSCLK/P07 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 A13/P75 A14/P76 A15/P77 D0,LED0/P80 D1,LED1/P81 D2,LED2/P82 D3,LED3/P83 D4,LED4/P84 D5,LED5/P85 D6,LED6/P86 D7,LED7/P87 SDO0/PD0 SDO1/PD1 SDO2/PD2 SDO3/PD3 SDO4/PD4 SDO5/PD5 SDO6/PD6 SDO7/PD7 DAVSS DA0/PC0 DA1/PC1 DA2/PC2 DA3/PC3 DAVDD 75 74 73 72 71 70 69 68 67 66 65 64 63 62 61 60 59 58 57 56 55 54 53 52 51 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96 97 98 99 100 MN101C49G MN101C49H MN101C49K 50 49 48 47 46 45 44 43 42 41 40 39 38 37 36 35 34 33 32 31 30 29 28 27 26 P40/KEY0 P37/NDKDMA P36/NSTDMA P35/NLDDMA/SCL/SBT3 P34/NBT/SBI3 P33/NBR/SDA/SBO3 P32/SBT1 P31/RXD1/SBI1 P30/TXD1/SBO1 P17(VPP) P16/TM4IO P15 P14/TM7IO P13/TM3IO P12/TM2IO P11/TM1IO P10/TM0IO/RMOUT P27/NRST P26(VDD2) P25/IRQ5 P24/IRQ4 P23/IRQ3 P22/IRQ2 P21/IRQ1/SENS P20/IRQ0 QFP100-P-1818B *Lead-free LQFP100-P-1414 *Lead-free ( ) : Flash memory built-in type. MAD00011GEM 64 www..com MN101C49G , MN101C49H , MN101C49K Support Tool In-circuit Emulator EPROM Built-in Type PX-ICE101C / D + PX-PRB101C49-QFP100-P-1818B PX-ICE101C / D + PX-PRB101C49-LQFP100-P-1414 Type ROM (x 8-bit) RAM (x 8-bit) Minimum instruction execution time MN101CP49K 224 K 10 K Standard: 0.10 s (at 4.5 V to 5.5 V, 20 MHz) 0.25 s (at 2.7 V to 5.5 V, 8.39 MHz) Double speed: 0.12 s (at 4.5 V to 5.5 V, 8.39 MHz) 0.25 s (at 3.0 V to 5.5 V, 4 MHz) Package QFP100-P-1818B *Lead-free, LQFP100-P-1414 *Lead-free MN101CF49K 224 K 10 K Standard: 0.10 s (at 4.5 V to 5.5 V, 20 MHz) Flash Memory Built-in Type Type ROM (x 8-bit) RAM (x 8-bit) Minimum instruction execution time Double speed: 0.12 s (at 4.5 V to 5.5 V, 8.39 MHz) Package QFP100-P-1818B *Lead-free, LQFP100-P-1414 *Lead-free MAD00011GEM 65 www..com MN101C77A, MN101C77C, MN101C77D, MN101C77F Type ROM (x 8-bit) x RAM (x 8-bit) x Package Minimum Instruction Execution Time MN101C77A 32 K 1.5 K LQFP064-P-1414 *Lead-free MN101C77C 48 K 3K LQFP064-P-1414 TQFP064-P-1010C *Lead-free Standard: *Lead-free MN101C77D 64 K 6K LQFP064-P-1414 *Lead-free MN101C77F (under plannning) 96 K 6K LQFP064-P-1414 *Lead-free 0.1 s (at 2.5 V to 3.6 V, 20 MHz)* 0.2 s (at 2.1 V to 3.6 V, 10 MHz)* 0.5 s (at 1.8 V to 3.6 V, 4 MHz)* 62.5 s (at 1.8 V to 3.6 V, 32 kHz)* Double speed: 0.119 s (at 2.5 V to 3.6 V, 8.39 MHz)* * The operation guarantee range for flash memory built-in type is 2.7 V to 3.6 V. * RESET * Watchdog * External 0 * External 1 * External 2 * External 3 * External 4 * Timer 0 * Timer 1 * Timer 4 * Timer 5 * Timer 6 * Time base * Serial 0 reception * Serial 0 transmission * Serial 1 reception * Serial 1 transmission * Serial 3 * Serial 4 * Automatic transfer finish * A/D conversion finish * Timer 7 (2 systems) * Key interrupts (8 lines) Timer counter 0 : 8-bit x 1 (square-wave/8-bit PWM output, event count, generation of remote control carrier, pulse width measurement) Clock source ********************* 1/2, 1/4 of system clock frequency; 1/1, 1/4, 1/16, 1/32, 1/64 of OSC oscillation clock frequency; 1/1 of XI oscillation clock frequency; external clock input Interrupt source ***************** coincidence with compare register 0 Timer counter 1 : 8-bit x 1 (square-wave output, event count, synchronous output event) Clock source ********************* 1/2, 1/8 of system clock frequency; 1/1, 1/4, 1/16, 1/64, 1/128 of OSC oscillation clock frequency; 1/1 of XI oscillation clock frequency; external clock input Interrupt source ***************** coincidence with compare register 1 Timer counter 0, 1 can be cascade-connected. Timer counter 4 : 8-bit x 1 (square-wave/8-bit PWM output, event count, pulse width measurement, serial 1 baud rate timer) Clock source ********************* 1/2, 1/4 of system clock frequency; 1/1, 1/4, 1/16, 1/32, 1/64 of OSC oscillation clock frequency; 1/1 of XI oscillation clock frequency; 1/1 of external clock input frequency Interrupt source ***************** coincidence with compare register 4 Timer counter 5 : 8-bit x 1 (square-wave/8-bit PWM output, event count, pulse width measurement, serial 0 baud rate timer) Clock source *********************** 1/2, 1/4 of system clock frequency; 1/1, 1/4, 1/16, 1/32, 1/64 of OSC oscillation clock frequency; 1/1 of XI oscillation clock frequency; 1/1 of external clock input frequency Interrupt source ******************* coincidence with compare register 5 Interrupts Timer Counter MAD00038HEM 66 www..com MN101C77A, MN101C77C, MN101C77D, MN101C77F Timer Counter (Continue) Timer counter 6 : 8-bit freerun timer Clock source ********************* 1/1 of system clock frequency; 1/1, 1/4096, 1/8192 of OSC oscillation clock frequency; 1/1, 1/4096, 1/8192 of XI oscillation clock frequency Interrupt source ***************** coincidence with compare register 6 Timer counter 7 : 16-bit x 1 (square-wave/16-bit PWM output, cycle / duty continuous variable, event count, synchronous output evevt, pulse width measurement, input capture) Clock source ********************* 1/1, 1/2, 1/4, 1/16 of system clock frequency; 1/1, 1/2, 1/4, 1/16 of OSC oscillation clock frequency; 1/1, 1/2, 1/4, 1/16 of external clock input frequency Interrupt source ***************** coincidence with compare register 7 (2 lines) Time base timer (one-minute count setting) Clock source ********************* 1/1 of OSC oscillation clock frequency; 1/1 of XI oscillation clock frequency Interrupt source ***************** 1/128, 1/256, 1/512, 1/1024, 1/8192, 1/32768 of clock source frequency Watchdog timer Interrupt source ***************** 1/65536, 1/262144, 1/1048576 of system clock frequency DMA Controller (Automatic Data Transfer) Serial Interface Max. Transfer cycles : 255 Starting factor : external request, various types of interrupt, software Transfer mode : 1-byte transfer, word transfer, burst transfer Serial 0 : synchronous type / UART (full-duplex) x 1 Clock source ********************* 1/2, 1/4 of system clock frequency; pulse output of timer counter 5; 1/2, 1/4, 1/16, 1/64 of OSC oscillation clock frequency Serial 1 : synchronous type / UART (full-duplex) x 1 Clock source ********************* 1/2, 1/4 of system clock frequency; pulse output of timer counter 4; 1/2, 1/4, 1/16, 1/64 of OSC oscillation clock frequency Serial 3 : synchronous type/single-master I 2C x 1 Clock source ********************* 1/2, 1/4 of system clock frequency; pulse output of timer counter 3; 1/2, 1/4, 1/16, 1/32 of OSC oscillation clock frequency Serial 4 : I2C slave x 1 Applicable for I2C high-speed transfer mode, 7 bit/10bit address setting, general call I/O Pins A/D Inputs D/A Outputs Special Ports ROM Correction I/O 53 * Common use * Specified pull-up resistor available * Input/output selectable (bit unit) 10-bit x 7-ch. (with S/H) 8-bit x 2-ch. (Serves as AD pin, as well) Buzzer output, remote control carrier signal output, high-current drive port Correcting address designation : up to 3 addresses possible See the next page for electrical characteristics, pin assignment and support tool. MAD00038HEM 67 www..com Electrical Characteristics Supply current Limit Parameter Symbol IDD1 Operating supply current IDD2 IDD3 IDD4 Supply current at HALT IDD5 IDD6 Supply current at STOP IDD7 VDD = 3.3 V, Ta = 85C 30 fx = 32.768 kHz, VDD = 3.3 V VDD = 3.3 V, Ta = 25C 0 40 2 Condition min fosc = 20 MHz, VDD = 3.3 V, (fs = fosc/2) fosc = 8.39 MHz, VDD = 3.3 V, (fs = fosc/2) fx = 32.768 kHz, VDD = 3.3 V, (fs = fx/2) fx = 32.768 kHz, VDD = 3.3 V, Ta = 25C 5 typ 6 3 max 12 6 40 10 mA mA A A A A A Unit Ta = -40C to +85C, VDD = 1.8 V to 3.6 V, VSS = 0 V P73/SB00B/TXD0B P70/SB01B/TXD1B P71/SBI1B/RXD1B Pin Assignment P67/SD07/KEY7 P66/SD06/KEY6 P65/SD05/KEY5 P64/SD04/KEY4 P63/SD03/KEY3 P62/SD02/KEY2 P61/SD01/KEY1 P60/SD00/KEY0 48 47 46 45 44 43 42 41 40 39 38 37 36 35 34 P74/SBI0B/RXD0B P75/SBT0B P76/TCI01 P77/TCI05 P87/LED7 P86/LED6 P85/LED5 P84/LED4 P83/LED3 P82/LED2 P81/LED1 P80/LED0 AVSS PA0/AN0/DA0 PA1/AN1/DA1 PA2/AN2 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 33 P51/SB03/SDA3 P52/SBT3/SCL3 P53/SDA4B P72/SBT1B P54/SCL4B 32 31 30 29 28 27 SBI3/P50 IRQ4/P24 IRQ3/P23 IRQ2/P22 ACZ/IRQ1/P21 IRQ0/P20 TCI07/P14 TCI04B/P13 TC04A/P12 TCI00B/P11 RMOUT/TC00A/P10 BUZZER/P06 SBT0A/P05 RXD0A/SBI0A/P04 TXD0A/SB00A/P03 SCL4A/SBT1A/P02 MN101C77A MN101C77C MN101C77D MN101C77F 26 25 24 23 22 21 20 19 18 17 10 11 12 13 14 15 LQFP064-P-1414 *Lead-free TQFP064-P-1010C *Lead-free [MN101C77C] NC serves as the VPP pin in the MN101CF77G, and cannot be used as a user pin. SDA4A/RXD1A/SBI1A/P01 TXD1A/SB01A/P00 NRST/P27 AN3/PA3 AN4/PA4 AN5/PA5 AN6/PA6 NC (VPP) AVDD OSC2 OSC1 MMOD VDD VSS XI XO 16 1 2 3 4 5 6 7 8 9 MAD00038HEM 68 www..com MN101C77A, MN101C77C, MN101C77D, MN101C77F Support Tool In-circuit Emulator Flash Memory Built-in Type PX-ICE101C/D;PX-PRB101C77-TQFP064-P1010C PX-ICE101C/D;PX-PRB101C77-LQFP064-P1414 Type ROM (x 8-bit) RAM (x 8-bit) Minimum instruction execution time Package MN101CF77G 128 K 6K Standard: 0.1 s (at 2.7 V to 3.6 V, 20 MHz) LQFP064-P-1414 *Lead-free TQFP064-P-1010C *Lead-free MAD00038HEM 69 www..com MN101E01J, MN101E01K, MN101E01L, MN101E01M Type ROM (x 8-bit) x External memory can be expanded MN101E01J 192 K MN101E01K 256 K MN101E01L 320 K MN101E01M 384 K RAM (x 8-bit) x External memory can be expanded 10 K 10 K 14 K 20 K Package QFP100-P-1818B *Lead-free QFP100-P-1818B *Lead-free QFP100-P-1818B *Lead-free LQFP100-P-1414 *Lead-free QFP100-P-1818B *Lead-free LQFP100-P-1414 *Lead-free Minimum Instruction Execution Time Standard: 0.0625 s (at 3.0 V to 3.6 V, 32 MHz) 0.1 s (at 3.0 V to 3.6 V, 20 MHz) 62.5 s (at 3.0 V to 3.6 V, 32 kHz) Double speed: 0.10 s (at 3.0 V to 3.6 V, 10 MHz) Interrupts * RESET * Watchdog * External 0 * External 1 * External 2 * External 3 * External 4 * External 5 * Timer 0 * Timer 1 * Timer 2 * Timer 3 * Timer 4 * Timer 5 * Timer 6 * Timer 7 (2 systems) * Time base * Serial 0 (2 systems) * Serial 1 (2 systems) * Serial 2 * Serial 3 * Serial 4 (2 systems) * Automatic transfer finish * A/D conversion finish * Key interrupts (8 lines) Timer counter 0 : 8-bit x 1 (square-wave/8-bit PWM output, event count, generation of remote control carrier, pulse width measurement, generation of real time) Clock source ********************* 1/2, 1/4 of system clock frequency; 1/1, 1/4, 1/16, 1/32, 1/64 of OSC oscillation clock frequency; 1/1 of XI oscillation clock frequency; external clock input Interrupt source ***************** coincidence with compare register 0 Timer counter 1 : 8-bit x 1 (square-wave output, event count, synchronous output event) Clock source ********************* 1/2, 1/8 of system clock frequency; 1/1, 1/4, 1/16, 1/64, 1/128 of OSC oscillation clock frequency; 1/1 of XI oscillation clock frequency; external clock input Interrupt source ***************** coincidence with compare register 1 Timer counter 0, 1 can be cascade-connected. Timer counter 2 : 8-bit x 1 (square-wave/8-bit PWM output, event count, synchronous output event, pulse width measurement generation of real time, serial baud rate timer) Clock source ********************* 1/2, 1/4 of system clock frequency; 1/1, 1/4, 1/16, 1/32, 1/64 of OSC oscillation clock frequency; 1/1 of XI oscillation clock frequency; external clock input Interrupt source ***************** coincidence with compare register 2 Timer counter 3 : 8-bit x 1 (square-wave output, event count, generation of remote control carrier, serial baud rate timer) Clock source ********************* 1/2, 1/8 of system clock frequency; 1/1, 1/4, 1/16, 1/64, 1/128 of OSC oscillation clock frequency; 1/1 of XI oscillation clock frequency; external clock input Interrupt source ***************** coincidence with compare register 3 Timer counter 2, 3 can be cascade-connected. Timer counter 4 : 8-bit x 1 (square-wave/8-bit PWM output, event count, pulse width measurement, serial baud rate timer) Clock source ********************* 1/2, 1/4 of system clock frequency; 1/1, 1/4, 1/16, 1/32, 1/64 of OSC oscillation clock frequency; 1/1 of XI oscillation clock frequency; external clock input frequency Interrupt source ***************** coincidence with compare register 4 Timer counter 5 : 8-bit x 1 (square-wave output, event count, serial baud rate timer) Clock source ********************* 1/2, 1/4 of system clock frequency; 1/1, 1/4, 1/16, 1/64, 1/128 of OSC oscillation clock frequency; 1/1 of XI oscillation clock frequency; external clock input Interrupt source ***************** coincidence with compare register 5 Timer Counter MAD00034JEM 70 www..com MN101E01J, MN101E01K, MN101E01L, MN101E01M Timer Counter (Continue) Timer counter 4, 5 can be cascade-connected. Timer counter 6 : 8-bit freerun timer Clock source ********************* 1/1 of system clock frequency; 1/1, 1/4096, 1/8192 of OSC oscillation clock frequency; 1/1, 1/4096, 1/8192 of XI oscillation clock frequency Interrupt source ***************** coincidence with compare register 6 Timer counter 7 : 16-bit x 1 (square-wave/16-bit PWM output, cycle / duty continuous variable, event count, synchronous output evevt, pulse width measurement, input capture) Clock source ********************* 1/1, 1/2, 1/4, 1/16 of system clock frequency; 1/1, 1/2, 1/4, 1/16 of OSC oscillation clock frequency; 1/1, 1/2, 1/4, 1/16 of external clock input frequency Interrupt source ***************** coincidence with compare register 7 (2 lines) Time base timer (one-minute count setting) Clock source ********************* 1/1 of OSC oscillation clock frequency; 1/1 of XI oscillation clock frequency Interrupt source ***************** 1/128, 1/256, 1/512, 1/1024, 1/8192, 1/32768 of clock source frequency Watchdog timer Interrupt source ***************** 1/65536, 1/262144, 1/1048576, 1/4194304 of system clock frequency DMA Controller (Automatic Data Transfer) Serial Interface Max. Transfer cycles : 255 Starting factor : external request, various types of interrupt, software Transfer mode : 1-byte transfer, word transfer, burst transfer Serial 0 : synchronous type/UART (full-duplex) x 1 Clock source ********************* 1/2, 1/4 of system clock frequency; pulse output of timer counter 2, 4; 1/2, 1/4, 1/16, 1/64 of OSC oscillation clock frequency Serial 1 : synchronous type/UART (full-duplex) x 1 Clock source ********************* 1/2, 1/4 of system clock frequency; pulse output of timer counter 4, 5; 1/2, 1/4, 1/8, 1/16, 1/64 of OSC oscillation clock frequency Serial 2 : synchronous type/single-master I2Cx 1 Clock source ********************* 1/2, 1/4 of system clock frequency; pulse output of timer counter 2, 3; 1/2, 1/4, 1/8, 1/16, 1/32, 1/64, 1/128 of OSC oscillation clock frequency Serial 3 : synchronous type/single-master I2C x 1 Clock source ********************* 1/2, 1/4 of system clock frequency; pulse output of timer counter 3, 5; 1/2, 1/4, 1/8, 1/16, 1/32, 1/64, 1/128 of OSC oscillation clock frequency Serial 4 : synchronous type/UART (full-duplex) x 1 Clock source ********************* 1/2, 1/4 of system clock frequency; pulse output of timer counter 2, 5 ; 1/2, 1/4, 1/16, 1/64 of OSC oscillation clock frequency I/O Pins A/D Inputs D/A Outputs Special Ports ROM Correction I/O 34 50 * (5 V IF port) Common use * Specified pull-up resistor available * Input/output selectable (bit unit) * (3 V IF port) Common use * Specified pull-up resistor available * Input/output selectable (bit unit) 10-bit x 8-ch. (with S/H) 8-bit x 1-ch. Buzzer output, remote control carrier signal output, high-current drive port Correcting address designation : up to 3 addresses possible See the next page for electrical characteristics, pin assignment and support tool. MAD00034JEM 71 www..com Electrical Characteristics Supply current Limit Parameter Symbol IDD1 Operating supply current IDD2 IDD3 Supply current at HALT Supply current at STOP IDD6 IDD4 IDD5 Condition min fosc = 4 MHz, VDD = 3 V fx = 32 kHz, VDD = 3 V fx = 32 kHz, VDD = 3 V, Ta = 25C fx = 32 kHz, VDD = 3 V, Ta = -40C to +85C VDD = 3 V, Ta = 25C VDD = 3 V, Ta = -40C to +85C typ max mA mA A A A A 11(48) 30(80) 8(43) 22(75) Unit 30(60) 120(180) 12 0.3 30 3.0 80 ( ) : Flash memory built-in type. Pin Assignment TXD0B/SBO0B/P90 RXD0B/SBI0B/P91 SBT0B/P92 SDA3B/SBO3B/P93 SBI3B/P94 SCL3B/SBT3B/P95 IRQ2B/PD0 IRQ3B/PD1 TM4IOB/PD2 TM5IOB/PD3 TM7IOB/PD4 BUZZER/PD5 SYSCLK/PD6 VDD3 PD7 VSS3 AN0/PA0 AN1/PA1 AN2/PA2 AN3/PA3 AN4/PA4 AN5/PA5 AN6/PA6 AN7/PA7 5V I/F port VREF+ 75 74 73 72 71 70 69 68 67 66 65 64 63 62 61 60 59 58 57 56 55 54 53 52 51 P43 P42/SBT4 P41/SBI4/RXD4 P40/SBO4/TXD4 P87/LED7/D7 P86/LED6/D6 P85/LED5/D5 P84/LED4/D4 P83/LED3/D3 P82/LED2/D2 P81/LED1/D1 P80/LED0/D0 VSS2 P77/SDO7/NDK P76/SDO6/NWE P75/SDO5/NRE P74/SDO4/NCS P73/SDO3/A19 P72/SDO2/A18 P71/SDO1/A17 P70/SDO0/A16 P67/KEY7/A15 P66/KEY6/A14 P65/KEY5/A13 P64/KEY4/A12 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96 97 98 99 100 MN101E01J MN101E01K MN101E01L MN101E01M 50 49 48 47 46 45 44 43 42 41 40 39 38 37 36 35 34 33 32 31 30 29 28 27 26 P63/KEY3/A11 P62/KEY2/A10 P61/KEY1/A9 P60/KEY0/A8 P57/A7 P56/A6 P55/A5 P54/A4 P53/A3 P52/A2 P51/A1 P50/A0 P35/SBT3A/SCL3A P34/SBI3A P33/SBO3A/SDA3A P32/SBT1 P31/SBI1/RXD1 P30/SBO1/TXD1 P25/IRQ5 P24/IRQ4 P23/IRQ3A P22/IRQ2A P21/IRQ1 P20/IRQ0 P16/TM7IOA DAVDD DA0/P06 DAVSS TXD0A/SBO0A/P00 RXD0A/SBI0A/P01 SBT0A/P02 SDA2/SBO2/P03 SBI2/P04 SCL2/SBT2/P05 VDD1 MM0D OSC2 OSC1 VSS1 XI XO VDD2 MOD1 NRST/P27 RMOUT/TM0IO/P10 TM1IO/P11 TM2IO/P12 TM3IO/P13 TM4IOA/P14 TM5IOA/P15 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 QFP100-P-1818B *Lead-free LQFP100-P-1414 *Lead-free MAD00034JEM 72 www..com MN101E01J, MN101E01K, MN101E01L, MN101E01M Support Tool In-circuit Emulator Flash Memory Built-in Type PX-ICE101E9+PX-PRB101E01-QFP100-P-1818B PX-ICE101E9+PX-PRB101E01-QFP100-P-1414 Type ROM (x 8-bit) RAM (x 8-bit) Minimum instruction execution time MN101EF01M 384 K 24 K Standard: 0.0625 s (at 3.0 V to 3.6 V, 32 MHz) Double speed: 0.10 s (at 3.0 V to 3.6 V, 10 MHz) Package QFP100-P-1818B *Lead-free, LQFP100-P-1414 *Lead-free MAD00034JEM 73 www..com MN101C46F Type x ROM (x 8-bit) RAM (x 8-bit) x Package (Conventional Package) Minimum Instruction Execution Time Interrupts Timer Counter Serial Interface Caption I/O Pins A/D Inputs PWM Special Ports CRTC Notes I/O MN101C46F 96 K 3K SDIP042-P-0600C *Lead-free (SDIP042-P-0600) 279 ns (at 3.0 V to 3.6 V, 14.32 MHz) External (6 lines) Internal (12 lines) : Timer x 3, A/D, OSD, I2C, Caption x 4, Remote control, Watchdog 8-bit timer x 3 Watchdog timer: system clock fs 1/216, 1/218, 1/220 triple selection I2C x 1: for multimaster mode, bus line (output) has 2 systems * Built-in sync separator x 2 35 * Common use 5-bit x 8-ch. (with S/H) 8-bit x 6-ch. , 14-bit x 1-ch. Remote control reception 1-layer display (graphics, characters) Remote control input discriminant circuit built-in MAD00026DEM 74 www..com MN101C46F Pin Assignment IRQ0,RMIN,P00 *1 SDA1,P01 *1 SCL1,P02 IRQ1,ADIN0,P03 ADIN1,P04 ADIN2,P05 ADIN3,P06 ADIN4,P07 ADIN5,P10 ADIN6,P11 ADIN7,P12 *3 MMOD SYSCLK,P13 *1 PWM0,P14 PWM1,P15 PWM2,P16 IRQ2,PWM3,P17 IRQ3,PWM4,P20 *1 IRQ4,PWM5,P21 VDD CLL,P22 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 MN101C46F ( 42 41 40 39 38 37 36 35 34 33 32 31 30 29 28 27 26 25 24 23 22 ) : Conventional Package VSS OSC2 OSC1 VDD(VPP) *2 P42,SCL0 *1 P41,SDA0 *1 P40,PWM P37,NVSYNC,IRQ5 P36,NRST P35,YM P34,ROUT P33,GOUT P32,BOUT P31,YS FLASH *4 P30,NHSYNC P27,VREFH0 P26,CVBS0 P25,CVBS1 P24,VREFH1 P23,CLH SDIP042-P-0600C *Lead-free (SDIP042-P-0600) *1: 5 V dielectric Nch open drain output pin *2: MN101C46F (VDD), MN101CF46F (VPP) *3: MMOD = H (fixed) (Set the test mode pin to the normal mode.) Support Tool In-circuit Emulator EPROM Built-in Type Type *4: FLASH = L (fixed) (Set the flash mode pin to the normal mode.) PX-ICE101C/D+PX-PRB101C46-SDIP042-P-0600-M MN101CF46F [ES (Engineering Sample) available] 96 K 3K 279 ns (at 3.0 V to 3.6 V, 14.32 MHz) SDIP042-P-0600C *Lead-free (SDIP042-P-0600) ROM (x 8-bit) RAM (x 8-bit) Minimum instruction execution time Package (Conventional Package) MAD00026DEM 75 www..com MN101C47C, MN101C47D Type ROM (x8-bit) x RAM (x 8-bit) x Package (Conventional Package) Minimum Instruction Execution Time Interrupts Timer Counter Serial Interface Caption I/O Pins A/D Inputs PWM Special Ports CRTC Notes I/O MN101C47C 48 K 1.5 K MN101C47D 64 K 2K SDIP042-P-0600C *Lead-free, LQFP064-P-1414 *Lead-free (SDIP042-P-0600) 279 ns (at 3.0 V to 3.6 V, 14.32 MHz) External (6 lines) Internal (8 lines) : Timer x 3, A/D, OSD, I2C, Remote control, Watchdog 8-bit timer x 3 Watchdog timer: system clock fs 1/216, 1/218, 1/220 triple selection I2C x 1: for multimaster mode, bus line (output) has 2 systems * Built-in sync separator x 2 35 * Common use: 29 5-bit x 8-ch. (with S/H) 8-bit x 6-ch. , 14-bit x 1-ch. Remote control reception 1-layer display (graphics, characters) Remote control input discriminant circuit built-in Support Tool In-circuit Emulator EPROM Built-in Type PX-ICE101C/D+PX-PRB101C47-SDIP046-P-0600-M (under development) Type ROM (x 8-bit) RAM (x 8-bit) Minimum instruction execution time Package (Conventional Package) MN101CF46F (under development) 96 K 3K 279 ns (at 3.0 V to 3.6 V, 14.32 MHz) SDIP042-P-0600C *Lead-free, LQFP064-P-1414 *Lead-free (SDIP042-P-0600) MAD00027CEM 76 www..com MN101C47C, MN101C47D Pin Assignment IRQ0,RMIN,P00 *1 SDA1,P01 *1 SCL1,P02 IRQ1,ADIN0,P03 ADIN1,P04 ADIN2,P05 ADIN3,P06 ADIN4,P07 ADIN5,P10 ADIN6,P11 ADIN7,P12 *3 MMOD SYSCLK,P13 *1 PWM0,P14 PWM1,P15 PWM2,P16 IRQ2,PWM3,P17 IRQ3,PWM4,P20 *1 IRQ4,PWM5,P21 VDD P22 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 MN101C47C MN101C47D ( 42 41 40 39 38 37 36 35 34 33 32 31 30 29 28 27 26 25 24 23 22 *Lead-free ) : Conventional Package VSS OSC2 OSC1 VDD(VPP) *2 P42,SCL0 *1 P41,SDA0 *1 P40,PWM P37,NVSYNC,IRQ5 P36,NRST P35,YM P34,ROUT P33,GOUT P32,BOUT P31,YS VSS P30,NHSYNC P27 P26 P25 P24 P23 SDIP042-P-0600C (SDIP042-P-0600) *1: 5 V dielectric Nch open drain output pin *2: Mask ROM = VDD, Flash memory built-in type = VPP *3: MMOD = H (fixed) (Set the test mode pin to the normal mode.) N.C. N.C. VSS N.C. P31,YS P32,BOUT P33,GOUT P34,ROUT P35,YM P36,NRST N.C. P37,NVSYNC,IRQ5 N.C. P40,PWM N.C. N.C. 48 47 46 45 44 43 42 41 40 39 38 37 36 35 34 P30,NHSYNC N.C. N.C. P27 P26 P25 P24 P23 P22 N.C. VDD *1 P21,PWM5,IRQ4 P20,PWM4,IRQ3 P17,PWM3,IRQ2 N.C. P16,PWM2 33 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 32 31 30 29 28 27 26 MN101C47C MN101C47D 25 24 23 22 21 20 19 18 17 P41,SDA0 *1 N.C. P42, SCL0 *1 N.C. VDD(VPP) OSC1 OSC2 VSS IRQ0,RMIN,P00 SDA1,P01 *1 SCL1,P02 *1 IRQ1,ADIN0,P03 ADIN1,P04 N.C. N.C. ADIN2,P05 10 11 12 13 14 15 *1: 5 V dielectric Nch open drain output pin *2: MMOD = H (fixed) MAD00027CEM N.C. N.C. PWM1,P15 N.C. *1 PWM0,P14 SYSCLK,P13 N.C. *2 MMOD ADIN7,P12 ADIN6,P11 ADIN5,P10 N.C. ADIN4,P07 ADIN3,P06 N.C. N.C. LQFP064-P-1414 *Lead-free 16 1 2 3 4 5 6 7 8 9 77 www..com MN101E02H Type ROM (x 16-bit) x RAM (x 16-bit) x Package Minimum Instruction Execution Time Interrupts MN101E02H 160 K 16 K QFP084-P-1818E *Lead-free 100 ns (at 3.135 V to 3.465 V, normal-mode) External (5 lines) Internal (15 lines) : Timer x 4, A/D x 1, RESET x 1, OSD x 1, Serial x 2, Teletext decoder x 2, I2C x 1, Caption x 1, Remote control x 1, HSYNCx 1, VSYNCx 1 8-bit timer x 4 Watchdog timer: Time-out period is selectable. Timer Counter Serial Interface Caption/Teletext Decoder I/O Pins A/D Inputs PWM Special Ports CRTC Notes I/O I2C x 1: for multimaster mode, bus line (output) has 2 systems Sync serial / UART x 1 * Built-in sync separator x 1 35 * Common use 10-bit x 8-ch. (with S/H) 8-bit x 4-ch. , 14-bit x 1-ch. Remote control reception 1-layer display (graphics, characters, splits) Remote control input discriminant circuit built-in, build-in NTSC/PAL (BGHIDK, M, N)/SECAM/NTSC443 video signal processing circuit, built-in 3-line comb filter (NTSC) built-in adaptive 2-line comb filter (PAL), built-in teletext decoder MAD00040DEM 78 www..com MN101E02H Pin Assignment P07,ADIN7,VDAF P06,ADIN6,HDAF VDD(VPP)*2 P05,ADIN5 P04,ADIN4 P03,ADIN3 P02,ADIN2 P01,ADIN1 P00,ADIN0 63 62 61 60 59 58 57 56 55 54 53 52 51 50 49 48 47 46 45 44 43 SCOMP MMOD DVDD AVDD SIREF BOUT DVSS AVSS OSC2 OSC1 VCOI PDO P10,RMIN,IRQ0 *1 P11,SDA0 *1 P12,SCL0 *1 P13,PWM P14,VOUT0 P15,SBT0 P16,SBD0 P17,SBO0 *1 P20,SDA1 *1 P21,SCL1 *1 P22,PWM0 P23,PWM1 P24,PWM2 DVDD DVSS P25,SYSCLK *1 P26,TM0IO *1 P27,TM1IO P30,NRST P31,IRQ1 P32,IRQ2 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 42 41 40 39 38 37 36 35 34 33 GOUT ROUT VIREF VCOMP VMOUT AVDD FBPIN AVSS EW VOUT AVDD FSCOUT FSCIN FPCO AVSS FVCOI HOUT HDOWN EHTIN BEAMIN ABLIN MN101E02H 32 31 30 29 28 27 26 25 24 23 22 10 11 12 13 14 15 16 17 18 19 20 AVDD P36,PWM4 VREFH VREFL CLL P33,IRQ3 P34,IRQ4 VSYNC PIPYIN PIPVIN PIPUIN VREFM MCOMPIN MSCIN CREFH QFP084-P-1818E *Lead-free *1: 5V dielectric Nch open drain output pin *2: Mask ROM=VDD, Flash Memory built-in type=VPP Support Tool In-circuit Emulator Flash Memory Built-in Type PX-PAC101E02-4W9J Type ROM (x 8-bit) RAM (x 8-bit) Minimum instruction execution time Package MN101EF02K [ES (Engineering Sample) available] 160 K 16 K 100 ns QFP084-P-1818E *Lead-free MAD00040DEM CREFL AVSS MVIN CLH PIPYS MUIN 21 1 2 3 4 5 6 7 8 9 79 www..com MN101E04G Type x ROM (x 16-bit) RAM (x 16-bit) x Package Minimum Instruction Execution Time Interrupts MN101E04G 128 K 4K QFP084-P-1818E *Lead-free 100 ns (at 3.135 V to 3.465 V, normal-mode) External (5 lines) Internal (13 lines) : Timer x 4, A/D x 1, RESET x 1, OSD x 1, Serial x 2, I2C x 1, Caption x 1, Remote control x 1, HSYNCx 1, VSYNCx 1 8-bit timer x 4 Watchdog timer: I2C Time-out period is selectable. Timer Counter Serial Interface Caption/Teletext Decoder I/O Pins A/D Inputs PWM Special Ports CRTC Notes I/O x 1: for multimaster mode, bus line (output) has 2 systems Sync serial / UART x 1 * Built-in sync separator x 1 30 * Common use 10-bit x 8-ch. (with S/H) 8-bit x 4-ch. , 14-bit x 1-ch. Remote control reception 1-layer display (graphics, characters, splits) Remote control input discriminant circuit built-in, build-in NTSC/PAL/SECAM video signal processing circuit, built-in 3-line comb filter (NTSC) built-in adaptive 2-line comb filter (PAL) MAD00042DEM 80 www..com MN101E04G Pin Assignment P07,ADIN7,VDAF P06,ADIN6,HDAF VDD(VPP)*2 P05,ADIN5 P04,ADIN4 P03,ADIN3 P02,ADIN2 P01,ADIN1 P00,ADIN0 63 62 61 60 59 58 57 56 55 54 53 52 51 50 49 48 47 46 45 44 43 SCOMP MMOD DVDD AVDD SIREF BOUT DVSS AVSS OSC2 OSC1 VCOI PDO P10,RMIN,IRQ0 *1 P11,SDA0 *1 P12,SCL0 *1 P13,PWM P14,VOUT0 P15,SBT0 P16,SBD0 P17,SBO0 *1 P20,SDA1 *1 P21,SCL1 *1 P22,PWM0 P23,PWM1 P24,PWM2 DVDD DVSS P25,SYSCLK *1 P26,TM0IO *1 P27,TM1IO P30,NRST P31,IRQ1 P32,IRQ2 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 42 41 40 39 38 37 36 35 34 33 GOUT ROUT VIREF VCOMP VMOUT AVDD FBPIN AVSS EW VOUT AVDD FSCOUT FSCIN FPCO AVSS FVCOI HOUT HDOWN EHTIN BEAMIN ABLIN MN101E04G 32 31 30 29 28 27 26 25 24 23 22 10 11 12 13 14 15 16 17 18 19 20 AVDD P36,PWM4 VREFH VREFL CLL P33,IRQ3 P34,IRQ4 VSYNC PIPYIN PIPVIN PIPUIN VREFM MCOMPIN MSCIN CREFH QFP084-P-1818E *Lead-free *1: 5V dielectric Nch open drain output pin *2: Mask ROM=VDD, Flash Memory built-in type=VPP Support Tool In-circuit Emulator Flash Memory Built-in Type PX-PAC101E02-4W9J Type ROM (x 8-bit) RAM (x 8-bit) Minimum instruction execution time Package MN101EF04G [ES (Engineering Sample) available] 128 K 4K 100 ns QFP084-P-1818E *Lead-free MAD00042DEM CREFL AVSS MVIN CLH PIPYS MUIN 21 1 2 3 4 5 6 7 8 9 81 www..com MN101E11G Type ROM (x 16-bit) x RAM (x 16-bit) x Package Minimum Instruction Execution Time Interrupts MN101E11G 128 K 4K QFP084-P-1818E *Lead-free 100 ns (at 3.135 V to 3.465 V, normal-mode) External (5 lines) Internal (13 lines) : Timer x 4, A/D x 1, RESET x 1, OSD x 1, Serial x 2, I2C x 1, Caption x 1, Remote control x 1, HSYNCx 1, VSYNCx 1 8-bit timer x 4 Watchdog timer: Time-out period is selectable. Timer Counter Serial Interface Caption/Teletext Decoder I/O Pins A/D Inputs PWM Special Ports CRTC Notes I/O I2C x 1: for multimaster mode, bus line (output) has 2 systems Sync serial / UART x 1 * Built-in sync separator x 1 30 * Common use 10-bit x 8-ch. (with S/H) 8-bit x 4-ch. , 14-bit x 1-ch. Remote control reception 1-layer display (graphics, characters, splits) Remote control input discriminant circuit built-in, build-in NTSC video signal processing circuit, built-in 3-line comb filter PinP available MAD00044CEM 82 www..com MN101E11G Pin Assignment P07,ADIN7,VDAF P06,ADIN6,HDAF VDD(VPP)*2 P05,ADIN5 P04,ADIN4 P03,ADIN3 P02,ADIN2 P01,ADIN1 P00,ADIN0 63 62 61 60 59 58 57 56 55 54 53 52 51 50 49 48 47 46 45 44 43 SCOMP MMOD DVDD AVDD SIREF BOUT DVSS AVSS OSC2 OSC1 VCOI PDO P10,RMIN,IRQ0 *1 P11,SDA0 *1 P12,SCL0 *1 P13,PWM P14,VOUT0 P15,SBT0 P16,SBD0 P17,SBO0 *1 P20,SDA1 *1 P21,SCL1 *1 P22,PWM0 P23,PWM1 P24,PWM2 DVDD DVSS P25,SYSCLK *1 P26,TM0IO *1 P27,TM1IO P30,NRST P31,IRQ1 P32,IRQ2 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 42 41 40 39 38 37 36 35 34 GOUT ROUT VIREF VCOMP VMOUT AVDD FBPIN AVSS EW VOUT AVDD FSCOUT FSCIN FPCO AVSS FVCOI HOUT HDOWN EHTIN BEAMIN ABLIN MN101E11G 33 32 31 30 29 28 27 26 25 24 23 22 10 11 12 13 14 15 16 17 18 19 20 AVDD P36,PWM4 VREFH VREFL CLL P33,IRQ3 P34,IRQ4 VSYNC PIPYIN PIPVIN PIPUIN VREFM MCOMPIN MSCIN CREFH QFP084-P-1818E *Lead-free *1: 5V dielectric Nch open drain output pin *2: Mask ROM=VDD, Flash Memory built-in type=VPP Support Tool In-circuit Emulator Flash Memory Built-in Type PX-PAC101E02-4W9J Type ROM (x 8-bit) RAM (x 8-bit) Minimum instruction execution time Package MN101EF11G 128 K 4K 100 ns QFP084-P-1818E *Lead-free MAD00044CEM CREFL AVSS MVIN CLH PIPYS MUIN 21 1 2 3 4 5 6 7 8 9 83 www..com MN101E13G Type ROM (x 16-bit) x RAM (x 16-bit) x Package Minimum Instruction Execution Time Interrupts MN101E13G 128 K 4K QFP084-P-1818E *Lead-free 100 ns (at 3.135 V to 3.465 V, normal-mode) External (7 lines) Internal (13 lines) : Timer x 4, A/D x 1, RESET x 1, OSD x 1, Serial x 2, I2C x 1, Caption x 1, Remote control x 1, HSYNCx 1, VSYNCx 1 8-bit timer x 4 Watchdog timer: Time-out period is selectable. Timer Counter Serial Interface Caption/Teletext Decoder I/O Pins A/D Inputs PWM Special Ports CRTC Notes I/O I2C x 1: for multimaster mode, bus line (output) has 2 systems Sync serial / UART x 1 * Built-in sync separator x 1 35 * Common use 10-bit x 8-ch. (with S/H) 8-bit x 6-ch. , 14-bit x 1-ch. Remote control reception 1-layer display (graphics, characters, splits) Remote control input discriminant circuit built-in, build-in NTSC video signal processing circuit, built-in 3-line comb filter MAD00045CEM 84 www..com MN101E13G Pin Assignment P07,ADIN7,VDAF P06,ADIN6,HDAF VDD(VPP)*2 P05,ADIN5 P04,ADIN4 P03,ADIN3 P02,ADIN2 P01,ADIN1 P00,ADIN0 63 62 61 60 59 58 57 56 55 54 53 52 51 50 49 48 47 46 45 44 43 SCOMP MMOD DVDD AVDD SIREF BOUT DVSS AVSS OSC2 OSC1 VCOI PDO P10,RMIN,IRQ0 *1 P11,SDA0 *1 P12,SCL0 *1 P13,PWM P14,VOUT0 P15,SBT0 P16,SBD0 P17,SBO0 *1 P20,SDA1 *1 P21,SCL1 *1 P22,PWM0 P23,PWM1 P24,PWM2 DVDD DVSS P25,SYSCLK *1 P26,TM0IO *1 P27,TM1IO P30,NRST P31,IRQ1 P32,IRQ2 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 10 11 12 13 14 15 16 17 18 19 20 21 1 2 3 4 5 6 7 8 9 42 41 40 39 38 37 36 35 34 GOUT ROUT VIREF VCOMP VMOUT AVDD FBPIN AVSS EW VOUT AVDD FSCOUT FSCIN FPCO AVSS FVCOI HOUT HDOWN EHTIN BEAMIN ABLIN MN101E13G 33 32 31 30 29 28 27 26 25 24 23 22 P40,TM2IO AVDD P33,IRQ3 P34,IRQ4 P35,PWM3 P36,PWM4 P37,PWM5 P41,IRQ5 P42,IRQ6 AVSS VREFH VREFM MCOMPIN VREFL MSCIN MVIN MUIN CREFH QFP084-P-1818E *Lead-free *1: 5V dielectric Nch open drain output pin *2: Mask ROM=VDD, Flash Memory built-in type=VPP Support Tool In-circuit Emulator Flash Memory Built-in Type PX-PAC101E02-4W9J Type ROM (x 8-bit) RAM (x 8-bit) Minimum instruction execution time Package MN101EF13G [ES (Engineering Sample) available] 128 K 4K 100 ns QFP084-P-1818E *Lead-free MAD00045CEM CREFL CLH CLL 85 www..com MN101C93K Type ROM (x 8-bit) x RAM (x 8-bit) x Package Minimum Instruction Execution Time Interrupts MN101C93K (under development) 224 K 6K LQFP100-P-1414 *Lead-free (under development), MLGA100-L-1010 *Lead-free (under planning) 0.125 s (at 3.0 V to 3.6 V, 8 MHz) 62.5 s (at 3.0 V to 3.6 V, 32 kHz) * RESET * Watchdog * External 0 * External 1 * External 2 * External 3 * External 4 * External 5 * External 6 (key interrupt dedicated) * Timer 0 * Timer 1 * Timer 2 * Timer 3 * Timer 6 * Time base * Timer 7 (2 systems) * Timer 8 (2 systems) * Serial 0 (2 systems) * Serial 1 (2 systems) * Serial 3 * A/D conversion finish * Automatic transfer finish * USB interrupts Conforms to USB1.1. USB transceiver built-in Full-speed (12 Mbps) supported. 5 end points (FIFO built-in independently) FIFO size (EP0, 1, 2, 3, 4): 16, 128, 128, 64, 64 bytes * EP0 Control transfer IN/OUT (two ways) * EP1 to EP4 Interrupt/Bulk/Isochronous transfer supported. Settable to IN or OUT. Double Buffering function supported. When the MAXP size is set to a half or less of the MAXFIFO size for each EP, the Double Buffering function is made valid automatically. Timer counter 0: 8-bit x 1 (square-wave/8-bit PWM output, event count, generation of remote control carrier, simple pulse width measurement, added pluse (2-bit) system PWM output) (square-wave/PWM output to large current terminal PC3 possible) Clock source ********************* 1/2, 1/4 of system clock frequency; 1/1, 1/4, 1/16, 1/32, 1/64 of OSC oscillation clock frequency; 1/1 of XI oscillation clock frequency; external clock input Interrupt source ***************** coincidence with compare register 0 Timer counter 1: 8-bit x 1 (square-wave output, event count, serial transfer clock output, synchronous output event) Clock source ********************* 1/2, 1/8 of system clock frequency; 1/1, 1/4, 1/16, 1/64, 1/128 of OSC oscillation clock frequency; 1/1 of XI oscillation clock frequency; external clock input Interrupt source ***************** coincidence with compare register 1 Timer counter 0, 1 can be cascade-connected. Timer counter 2: 8-bit x 1 (square-wave output, added pluse (2-bit) system PWM output, PWM output, serial transfer clock output, event count, synchronous output event, simple pulse width measurement) (square-wave/PWM output to large current terminal PC5 possible) Clock source ********************* 1/2, 1/4 of system clock frequency; 1/1, 1/4, 1/16, 1/32, 1/64 of OSC oscillation clock frequency; 1/1 of XI oscillation clock frequency; external clock input Interrupt source ***************** coincidence with compare register 2 USB Functions Timer Counter MAD00056BEM 86 www..com MN101C93K Timer Counter (Continue) Timer counter 3: 8-bit x 1 (square-wave output, event count, generation of remote control carrier, serial transfer clock) Clock source ********************* 1/2, 1/8 of system clock frequency; 1/1, 1/4, 1/16, 1/64, 1/128 of OSC oscillation clock frequency; 1/1 of XI oscillation clock frequency; external clock input Interrupt source ***************** coincidence with compare register 3 Timer counter 2, 3 can be cascade-connected. Timer counter 6: 8-bit freerun timer Clock source ********************* 1/1 of system clock frequency; 1/1, 1/128, 1/8192 of OSC oscillation clock frequency; 1/1, 1/128, 1/8192 of XI oscillation clock frequency Interrupt source ***************** coincidence with compare register 6 Timer counter 7: 16-bit x 1 (square-wave output, 16-bit PWM output (cycle / duty continuous variable), event count, synchronous output event, pulse width measurement, input capture, real time output control, high performance IGBT output (Cycle/Duty can be changed constantly)) (square-wave/PWM output to large current terminal PC4 possible) Clock source ********************* 1/1, 1/2, 1/4, 1/16 of system clock frequency; 1/1, 1/2, 1/4, 1/16 of OSC oscillation clock frequency; 1/1, 1/2, 1/4, 1/16 of external clock input frequency Interrupt source ***************** coincidence with compare register 7 (2 lines), input capture register Timer counter 8: 16 bit x 1 (square-wave/16-bit PWM output [duty continuous variable], event count, pulse width measurement, input capture) (square-wave/PWM output to large current terminal PC6 possible) Clock source ********************* 1/1, 1/2, 1/4, 1/16 of system clock frequency; 1/1, 1/2, 1/4, 1/16 of OSC oscillation clock frequency; 1/1, 1/2, 1/4, 1/16 of external clock input frequency Interrupt source ***************** coincidence with compare register 8 (2 lines), input capture register Timer counters 7, 8 can be cascade-connected. (square-wave output, PWM is possible as a 32-bit timer.) Time base timer (one-minute count setting) Clock source ********************* 1/1 of OSC oscillation clock frequency; 1/1 of XI oscillation clock frequency Interrupt source ***************** 1/128, 1/256, 1/512, 1/1024, 1/4096, 1/8192, 1/16384, 1/32768 of clock source frequency Watchdog timer Interrupt source ***************** 1/65536, 1/262144, 1/1048576 of system clock frequency DMA Controller (Automatic Data Transfer) Serial Interface Max. Transfer cycles 255 Starting factor external request, various types of interrupt, software Transfer mode 1-byte transfer, word transfer, burst transfer Serial 0: synchronous type/UART (full-duplex) x 1 Clock source ********************* 1/2, 1/4 of system clock frequency; pulse output of timer counter 1 or 2; 1/2, 1/4, 1/16, 1/64 of OSC oscillation clock frequency, external clock Serial 1: synchronous type/UART (full-duplex) x 1 Clock source ********************* 1/2, 1/4 of system clock frequency; pulse output of timer counter 1 or 2; 1/2, 1/4, 1/16, 1/64 of OSC oscillation clock frequency, external clock Serial 3: synchronous type/single-master I2C x 1 Clock source ********************* 1/2, 1/4 of system clock frequency; pulse output of timer counter 2 or 3; 1/2, 1/4, 1/16, 1/32 of OSC oscillation clock frequency, external clock MAD00056BEM 87 www..com I/O Pins A/D Inputs LCD I/O 84 * Common use * Specified pull-up resistor available * Input/output selectable (bit unit) 10-bit x 12-ch. (with S/H) 47 segments x 4 commons (static, 1/2, 1/3, or 1/4 duty) LCD power supply separated from VDD (usable if VDD = VLCD 3.6 V) LCD power shunt resistance contained USB ports (D+, D-), buzzer output, remote control carrier signal output, high-current drive port, clock output Correcting address designation: up to 7 addresses possible Special Ports ROM Correction Pin Assignment P02/SEG44/SYSCLK/SBT3/SCL3 P03/SEG43/NDK/SBO3/SDA3 P47/SEG32/D7/KEY7/SDO7 P46/SEG33/D6/KEY6/SDO6 P45/SEG34/D5/KEY5/SDO5 P44/SEG35/D4/KEY4/SDO4 P43/SEG36/D3/KEY3/SDO3 P42/SEG37/D2/KEY2/SDO2 P41/SEG38/D1/KEY1/SDO1 P40/SEG39/D0/KEY0/SDO0 P01/SEG45/NBUZZER P04/SEG42/NCS/SBI3 P00/SEG46/BUZZER P05/SEG41/NWE P06/SEG40/NRE P56/SEG25/A6 P55/SEG26/A5 P54/SEG27/A4 P53/SEG28/A3 P52/SEG29/A2 P51/SEG30/A1 P50/SEG31/A0 P25/IRQ5 P24/IRQ4 52 75 74 73 72 71 70 69 68 67 66 65 64 63 62 61 60 59 58 57 56 55 54 53 P57/SEG24/A7 P60/SEG23/A8 P61/SEG22/A9 P62/SEG21/A10 P63/SEG20/A11 P64/SEG19/A12 P65/SEG18/A13 P66/SEG17/A14 P67/SEG16/A15 P70/SEG15/A16 P71/SEG14/A17 P72/SEG13 P73/SEG12 P74/SEG11 P75/SEG10 P76/SEG9 P77/SEG8 P80/SEG7 P81/SEG6 P82/SEG5 P83/SEG4 P84/SEG3 P85/SEG2 P86/SEG1 P87/SEG0 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96 97 98 99 100 51 P23/IRQ3 50 49 48 47 46 45 44 43 42 41 40 39 IRQ2/P22 IRQ1/P21 IRQ0/P20 TM8IO/P15 TM7IO/P14 TM3IO/P13 TM2IO/P12 TM1IO/P11 RMOUT/TM0IO/P10 RXD1/SBI1/AN11/PB7 TXD1/SBO1/AN10/PB6 SBT1/AN9/PB5 RXD0A/SBI0A/AN8/PB4 TXD0A/SBO0A/AN7/PB3 SBT0A/AN6/PB2 VSS DD+ VDD AN5/PA5 AN4/PA4 AN3/PA3 AN2/PA2 AN1/PA1 AN0/PA0 MN101C93K 38 37 36 35 34 33 32 31 30 29 28 27 26 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 DMOD RXD0B/SBI0B/LED0/PC0 TXD0B/SBO0B/LED1/PC1 COM0/P90 COM1/P91 COM2/P92 COM3/P93 VLC3/P94 VLC2 VLC1 N.C. TM0O/LED3/PC3 TM7O/LED4/PC4 TM2O/LED5/PC5 SBT0B/LED2/PC2 TM8O/LED6/PC6 VSS VDD XO MMOD OSC1 OSC2 LQFP100-P-1414 *Lead-free MLGA100-L-1010 *Lead-free NRST/P27 Vref+ XI 25 1 2 3 4 5 6 7 8 9 MAD00056BEM 88 www..com MN101C93K Support Tool In-circuit Emulator Flash Memory Built-in Type PX-ICE101C / D + PX-PRB101C93-LQFP100-P-1414-M (under development) Type ROM (x 8-bit) RAM (x 8-bit) Minimum instruction execution time MN101CF93K (under development) 224 K 6K 0.167 s (at 3.0 V to 3.6 V, 6 MHz) 62.5 s (at 3.0 V to 3.6 V, 32 kHz) Package LQFP100-P-1414 *Lead-free (under development) MLGA100-L-1010 *Lead-free (under planning) MAD00056BEM 89 www..com MN101D06F , MN101D06G , MN101D06H Type ROM (x 8-bit) x RAM (x 8-bit) x Package Minimum Instruction Execution Time Interrupts With main clock operated When sub-clock operated MN101D06F 96 K 3K MN101D06G 128 K 4K QFP100-P-1818B *Lead-free MN101D06H 160 K 5K 0.1397 s (at 4.0 V to 5.5 V, 14.32 MHz) 71.5 s (at 3.0 V to 5.5 V fixed to 14.32 MHz internal frequency division) 61 s (at 2.2 V to 5.5 V, 32.768 kHz) * RESET * Runaway * External 0 * External 1 * External 2 * External 3 * External 4 * key input (P50 to 54) * Timer 0 * Timer 1 * Timer 2 * Timer 3 * Timer 4 * Timer 6 * Capstan FG * Control * HSW * Cylinder(Drum) FG * Servo V-sync * Synchronous output * OSD * XDS * Serial 0 * Serial 1 * Serial 2 * A/D (common with PWM 4 reference frequency) * OSD V-sync Timer counter 0: 16-bit x 1 (timer function, clock function [max. 2 s or max. 36 h at cascade-connecting with timer 6]) Clock source ********************* 1/2, (1/4,) 1/8, (1/16) of system clock frequency; overflow of timer counter 6; 1/512 of XI oscillation clock or OSC oscillation clock frequency Interrupt source **************** overflow of timer counter 0 Timer counter 1: 16-bit x 1 (timer function, linear timer counter function) Clock source ********************* 1/2, (1/4,) 1/8, (1/16) of system clock frequency; CTL signal Interrupt source **************** overflow of timer counter 1 Timer counter 2: 16-bit x 1 (timer function, input capture, duty judgment of CTL signal(VISS/VASS detection function)) Clock source ********************* 1/2, (1/4,) 1/8, (1/16,) 1/12, (1/24) of system clock frequency Interrupt source **************** overflow of timer counter 2; input of CTL specified edge; underflow of timer 2 shift register 4-bit counter; coincidence of timer 2 shift register with timer 2 shift register compare register Timer counter 3: 16-bit x 1 (timer function, detection of serial indexing, generation of remote control output carrier frequency) Clock source ********************* 1/2, (1/4,) 1/8, (1/16) of system clock frequency; XI oscillation clock Interrupt source **************** overflow of timer counter 3 Timer counter 4: 16-bit x 1 (timer function, event count [P15 input], generation of serial transmission clock) Clock source ********************* 1/8, (1/16) of system clock frequency; external clock input Interrupt source **************** overflow of timer counter 4; coincidence of timer counter 4 with OCR4 Timer counter 5: 19-bit x 1 (watchdog, stable oscillation waiting function) Clock source ********************* system clock Watchdog interrupt source ** 1/216, 1/219 of timer counter 5 frequency Clear by stable oscillation ** after 256 counts by timer counter 5 (2 18 counts of OSC oscillation clock) Timer counter 6: 16-bit x 1 (clock function [max. 2 s]) Clock source ********************* 1/512 of OSC oscillation clock frequency; XI oscillation clock; 1/4, (1/8,) 1/64, (1/128) of system clock frequency Interrupt source **************** 1/213, 1/214, 1/215 overflow of timer counter 6 Timer counter 7: 8-bit x 1 or 4-bit x 2 (timer function, event count) Clock source ********************* 1/4, (1/8,) 1/16, (1/32) of system clock frequency; external clock input Interrupt source **************** overflow of timer counter 7 (although when 4-bit x 2, there is one interrupt vector. ) Timer Counter Serial Interface Serial 0: 8-bit x 1 (synchronous type/start-stop synchronous type) (transfer direction of MSB/LSB selectable) Synchronous type clock source 1/8, 1/16, 1/32, 1/64, 1/128, 1/256 of system clock frequency; 2-division timer 4 output; NSBT0 pin input Clock for UART ************** 8-division of above clock; 2-division timer 4 output; NSBT0 pin input MAD00029FEM 90 www..com MN101D06F,MN101D06G,MN101D06H Serial Interface (Continue) Serial 1: 8-bit x 1 (synchronous type/remote control transmission/simple remote control receive) (transfer direction of MSB/LSB selectable, start condition function) Clock source ********************* 1/8, 1/16, 1/32, 1/64, 1/128, 1/256 of system clock frequency; 2-division timer 4 output; NSBT1 pin input Remote control clock ****** 2-division timer 4 output Serial 2: 8-bit x 1 (I2C) (master transmission/reception, slave transmission/reception) Clock source ********************* 1/144 to 1/252 of system clock; SCK pin input OSD OSD mode: Accommodation with menu(internal synchronous) or super impose(external synchronous) display Applicable broadcasting system:NTSC, PAL, PAL-M, PAL-N Screen configuration : 24 characters x 2n rows (n = 1 to 6) Character type : max. 512 character types (variable, incude special characters) Character size : 12 x 18 dots (Vertical direction: 1 dot for 2H at not enlargement) Enlarged characters : each x 2, x 3 or x 4 settings in horizontal and vertical Character interpolation : none Line background color : 8-hue settable (settable in the row unit at menu display) Line background intensity : 8 gradations settable in the row unit (at output of composite video signal) Screen background color : 8-hue settable (at output of composite video signal) Character color : white (at output of composite video signal) Character intensity : 8 gradations settable in the row unit (at output of composite video signal) Frame function : 1-dot frame in 4 or 8 directions Frame intensity : 4 gradations settable in the row unit (at output of composite video signal) Box shade function : settable in the character unit (at output of composite video signal with 129 or more characters (character types)) Blinking : none (covered by software) Inverted character : settable in the character unit Halftone : settable in the row unit in 2 intensity gradations (at output of external synchronous composite video signal) CCD mode: Supports Closed Caption in the U.S.A. Screen configuration : 32 characters x 16 rows Character type : max. 128 character types (variable) Character size : 12 x 26 dots (Vertical direction: 1 dot for 1H, including 8 dots in the underlined area) Enlarged characters : none Character interpolation : none Line background color : 8-hue settable Line background intensity : 8 gradations settable in the screen unit (at output of composite video signal) Screen background color : 8-hue settable (at output of composite video signal) Character color : 8 colors (at RGB output) : White (at output of composite video signal) Character intensity : 8 gradations settable in the screen unit (at output of composite video signal) Frame function : none Box shade function : none Inverted character : none Halftone : settable in the row unit in 2 intensity gradations (at output of external synchronous composite video signal) Others : Underline, italic, blinking function and scroll Input : composite video signal input (output level: 1 V[p-p] / 2 V[p-p]) Clamp method : sync tip clamp, clamp level in 4 levels Output : composite video output : digital output (6 pins) Measure against image fluctuation : built-in AFC circuit Dot clock : 1/2 of OSC oscillation clock (automatic phase adjustment) See the next page for electrical characteristics, pin assignment and support tool. MAD00029FEM 91 www..com XDS ROM Correction I/O Pins A/D Inputs PWM I/O Input Built-in U.S. closed caption data slicer (optional 2 line data can be extracted.) Correcting address designation: up to 3 addresses possible Correction method: correction program being saved in internal RAM 75 2 * Common use: 66 * Common use: 2 8-bit x 13-ch. (without S/H) 13-bit x 2-ch. (at repetition cycle 572 s at 14.32 MHz), 10-bit x 2-ch. (at repetition cycle 71.5 s at 14.32 MHz), 8-bit x 1-ch. (at repetition cycle 71.5 s, 0.572 ms, 1.14 ms, 2.29 ms at 14.32 MHz) 18-bit x 6-ch. 16-bit x 2 (8-bit synchronous output; 4-bit 3-state synchronous output), 16-bit x 1 (weak electric field V-sync backup), 16-bit x 1 (Rec CTL) Buzzer output; 3-state output VLP pin; remote control receive; CTL signal input terminal; Capstan FG inputterminal; Sylinder(Durm) PG/FG input terminals; HSW output terminal; Head Amp/Rortary control output terminals; output of 1/2 OSC oscillation clock (2 V[p-p]); output of 1/4 OSC oscillation clock (1 V[p-p]) ICR OCR Special Ports Electrical Characteristics Supply current Limit Parameter Symbol IDD1 IDD2 Operating supply current Stop of 14.32 MHz oscillation, VDD = 2.7 V IDD3 32 kHz oscillation operation without load Supply current at STOP IDSP IDHT0 Supply current at HALT IDHT1 32 kHz oscillation operation without load Stop of oscillation without load, VDD = 5 V, Ta = 55 C 14.32 MHz oscillation without load, VDD = 5 V Stop of 14.32 MHz oscillation, VDD = 2.7 V 5 20 5 10 15 A mA A 50 100 A Condition min 14.32 MHz operation without load, VDD = 5 V 1/1024 of 14.32 MHz operation without load, VDD = 3.0 V typ 60 2 max 100 5 mA mA Unit (Ta = 25 C 2 C , VSS = 0 V) A/D Converter Performance Limit Parameter Conversion relative error A/D Conversion Time Analog Input Voltage Symbol NLAD tAD fosc = 14.32 MHz 8 5 Condition min typ max 3 LSB s V Unit (Ta = 25 C 2 C , VDD = 5.0 V , VSS = 0 V) MAD00029FEM 92 www..com MN101D06F , MN101D06G , MN101D06H Pin Assignment RCTLN RCTLP AVDD CTLA AVSS VRI VRO AFG FGF YPG(P91) YFG(PFG) PGMM(P92) VOW1(PA0) VOW2(PA1) VOW3(PA2) VOW4(PA3) VOB1(PA4) VOB2(PA5) PA6 SECAM(PA7) FSCLPF(PB0) FSCI(PB1) AFCLPF(PB2) AFCC(PB3) VDD2 75 74 73 72 71 70 69 68 67 66 65 64 63 62 61 60 59 58 57 56 55 54 53 52 51 Support Tool In-circuit Emulator Flash Memory Built-in Type PX-ICE101C / D + PX-PRB101D06-QFP100-P-1818B-M Type ROM (x 8-bit) RAM (x 8-bit) Minimum instruction execution time MN101DF06ZAF 224 K 6K 0.1397 s (at 4.0 V to 5.5 V, 14.32 MHz) 71.5 s (at 3.0 V to 5.5 V, fixed to 14.32 MHz internal division) 61 s (at 2.5 V to 5.5 V, 32.768 kHz) Package QFP100-P-1818B *Lead-free MAD00029FEM IRQ0(P64) IRQ1(P63) IRQ2(P62) IRQ3(P61) IRQ4(P60) KEYIRQ4(P54) KEYIRQ3(P53) KEYIRQ2(P52) KEYIRQ1(P51) KEYIRQ0(P50) NSBT1(P07) NSBI1(P06) NSBO1(P05) NSBT0(P02) NSBI0(P01) NSBO0(P00) SDA(P27) SCK(P26) HBUFD6/BUZZER(P46) HBUFD4(P44) HBUFD2/DAOUT(P42) HBUFD0(P40) HSW VLP NRST(P04) 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 CO TPZ(P90/AD12) AD11(PC3) AD10(PC2) AD9(PC1) AD8(PC0) AD7(P87) AD6(P86) AD5(P85) AD4(P84) AD3(P83) AD2(P82) AD1(P81) AD0(P80) P77 P76 P75 P74 P73 P72 P71 P70 ROTA(P67) HAMP(P66) DENV(P65) 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96 97 98 99 100 MN101D06F MN101D06G MN101D06H 50 49 48 47 46 45 44 43 42 41 40 39 38 37 36 35 34 33 32 31 30 29 28 27 26 CVIN2(PB4) CVIN(PB5) VSS2 CVOUT(PB6) HSYNC(PB7) VSYN(P20) OSCO2(P21) OSCI2(P22) SXI XO(P23) XI(P24) VSS OSCI OSCO VDD SBUFD0(P25/PWM4) PWM0 PWM1 SBUFD1(P11/PWM2) SBUFD2(P12/PWM3) SBUFD3(P13/FF15) SBUFD4(P14/TC3O) SBUFD5(P15/TC4I) SBUFD6(OSDH/P16/XDSCK) SBUFD7(OSDV/P17/OSCDIV/XDSDAT) QFP100-P-1818B *Lead-free 93 www..com MN101D07G,MN101D07H Type ROM (x 8-bit) x RAM (x 8-bit) x Package Minimum Instruction Execution Time Interrupts With main clock operated When sub-clock operated MN101D07G 128 K 4K LQFP112-P-2020 *Lead-free MN101D07H 160 K 5K 0.1397 s (at 4.0 V to 5.5 V, 14.32 MHz) 71.5 s (at 3.0 V to 5.5 V fixed to 14.32 MHz internal frequency division) 61 s (at 2.2 V to 5.5 V, 32.768 kHz) * RESET * Runaway * External 0 * External 1 * External 2 * External 3 * External 4 * key input (P50 to 54) * Timer 0 * Timer 1 * Timer 2 * Timer 3 * Timer 4 * Timer 6 * Timer 7 * Capstan FG * Control * HSW * Cylinder(Drum) FG * Servo V-sync * Synchronous output * OSD * XDS * Serial 0 * Serial 1 * Serial 2 * A/D (common with PWM 4 reference frequency) * OSD V-sync Timer counter 0: 16-bit x 1 (timer function, clock function [max. 2 s or max. 36 h at cascade-connecting with timer 6]) Clock source ********************* 1/2, (1/4,) 1/8, (1/16) of system clock frequency; overflow of timer counter 6; 1/512 of XI oscillation clock or OSC oscillation clock frequency Interrupt source ***************** overflow of timer counter 0 Timer counter 1: 16-bit x 1 (timer function, linear timer counter function) Clock source ********************* 1/2, (1/4,) 1/8, (1/16) of system clock frequency; CTL signal Interrupt source ***************** overflow of timer counter 1 Timer counter 2: 16-bit x 1 (timer function, input capture (DCTL specified edge), duty judgment of DCTL signal) Clock source ********************* 1/2, (1/4,) 1/8, (1/16,) 1/12, (1/24) of system clock frequency Interrupt source ***************** overflow of timer counter 2; input of DCTL specified edge; underflow of timer 2 shift register 4-bit counter; coincidence of timer 2 shift register with timer 2 shift register compare register Timer counter 3: 16-bit x 1 (timer function, detection of serial indexing, generation of remote control output carrier frequency) Clock source ********************* 1/2, (1/4,) 1/8, (1/16) of system clock frequency; XI oscillation clock Interrupt source ***************** overflow of timer counter 3 Timer counter 4: 16-bit x 1 (timer function, event count [P15 input], generation of serial transmission clock) Clock source ********************* 1/8, (1/16) of system clock frequency; external clock input Interrupt source ***************** overflow of timer counter 4; coincidence of timer counter 4 with OCR4 Timer counter 5: 19-bit x 1 (watchdog, stable oscillation waiting function) Clock source ********************* system clock Watchdog interrupt source *** 1/2 16, 1/219 of timer counter 5 frequency Clear by stable oscillation *** after 256 counts by timer counter 5 (2 18 counts of OSC oscillation clock) Timer counter 6: 16-bit x 1 (clock function [max. 2 s]) Clock source ********************* 1/512 of OSC oscillation clock frequency; XI oscillation clock; 1/4, (1/8,) 1/64, (1/128) of system clock frequency Interrupt source ***************** 1/213, 1/2 14, 1/215 overflow of timer counter 6 Timer counter 7: 8-bit x 1 or 4-bit x 2 (timer function, event count) Clock source ********************* 1/4, (1/8,) 1/16, (1/32) of system clock frequency; external clock input Interrupt source ***************** overflow of timer counter 7 (although when 4-bit x 2, there is one interrupt vector. ) Timer Counter Serial Interface Serial 0: 8-bit x 1 (synchronous type/start-stop synchronous type) (transfer direction of MSB/LSB selectable) Synchronous type clock source *** 1/8, 1/16, 1/32, 1/64, 1/128, 1/256 of system clock frequency; 2-division timer 4 output; NSBT0 pin input Clock for UART **************** 8-division of above clock; 2-division timer 4 output; NSBT0 pin input MAD00030FEM 94 www..com MN101D07G,MN101D07H Serial Interface (Continue) Serial 1: 8-bit x 1 (synchronous type/remote control transmission/simple remote control receive) (transfer direction of MSB/LSB selectable, start condition function) Clock source ********************* 1/8, 1/16, 1/32, 1/64, 1/128, 1/256 of system clock frequency; 2-division timer 4 output; NSBT1 pin input Remote control clock ******* 2-division timer 4 output Serial 2: 8-bit x 1 (I 2C) (master transmission/reception, slave transmission/reception) Clock source ********************* 1/144 to 1/252 of system clock, SCK pin input OSD OSD mode: Accommodation with menu(internal synchronous) or super impose(external synchronous) display Applicable broadcasting system : NTSC, PAL, PAL-M, PAL-N Screen configuration : 24 characters x 2n rows (n = 1 to 6) Character type : max. 512 character types (variable) Character size : 12 x 18 dots Enlarged characters : each x 2, x 3 or x 4 settings in horizontal and vertical Character interpolation : none Line background color : 8-hue settable (settable in the row unit at menu display) Line background intensity : 8 gradations settable in the row unit(at output of composite video signal) Screen background color : 8-hue settable (at output of composite video signal) Character color : white (at output of composite video signal) Character intensity : 8 gradations settable in the row unit Frame function : 1-dot frame in 4 or 8 directions (at output of composite video signal) Frame intensity : 4 gradations settable in the row unit Box shade function : settable in the character unit (at output of composite video signal with 129 or more characters (character types)) Blinking : none (covered by software) Inverted character : settable in the character unit Halftone : settable in the row unit in 2 intensity gradations (at output of external synchronous composite video signal) CCD mode:Supports Closed Caption in the U.S.A. Screen configuration : 32 characters x 16 rows Character type : max. 128 character types (variable) Character size : 12 x 26 dots (including 8 dots in the underlined area) Enlarged characters : none Character interpolation : none Line background color : 8-hue settable Line background intensity : 8 gradations settable in the screen unit (at output of composite video signal) Screen background color : 8-hue settable (at output of composite video signal) Character color : 8 colors (at RGB output) : White (at output of composite video signal) Character intensity : 8 gradations settable in the screen unit(at output of composite video signal) Frame function : none Box shade function : none Inverted character : none Halftone : settable in the row unit in 2 intensity gradations (at output of external synchronous composite video signal) Others : Underline, italic, blinking function and scroll Input : composite video signal input (output level: 1 V[p-p] / 2 V[p-p]) Clamp method : sync tip clamp, clamp level in 4 levels Output : composite video output : output of Y/C split video signal : digital output (6 pins) Measure against image fluctuation : built-in AFC circuit Dot clock : 1/2 of OSC oscillation clock (automatic phase adjustment) See the next page for electrical characteristics, pin assignment and support tool. MAD00030FEM 95 www..com XDS ROM Correction I/O Pins A/D Inputs PWM I/O Input Built-in U.S. closed caption data slicer (optional 2 line data can be extracted.) Correcting address designation: up to 3 addresses possible Correction method: correction program being saved in internal RAM 85 2 * Common use: 71 * Common use: 2 8-bit x 14-ch. (without S/H) 13-bit x 2-ch. (at repetition cycle 572 s at 14.32 MHz), 10-bit x 2-ch. (at repetition cycle 71.5 s at 14.32 MHz), 8-bit x 1-ch. (at repetition cycle 71.5 s, 0.572 ms, 1.14 ms, 2.29 ms at 14.32 MHz) 18-bit x 6-ch. 16-bit x 2 (8-bit synchronous output; 4-bit 3-state synchronous output), 16-bit x 1 (weak electric field V-sync backup), 16-bit x 1 (Rec CTL) Buzzer output; 3-state output VLP pin; remote control receive; CTL signal input terminal; Capstan FG inputterminal; Sylinder(Durm) PG/FG input terminals; HSW output terminal; Head Amp/Rortary control output terminals; output of 1/2 OSC oscillation clock (2 V[p-p]); output of 1/4 OSC oscillation clock (1 V[p-p]) ICR OCR Special Ports Electrical Characteristics Supply current Limit Parameter Symbol IDD1 IDD2 Operating supply current Stop of 14.32 MHz oscillation, VDD = 2.7 V IDD3 32 kHz oscillation operation without load Supply current at STOP IDSP IDHT0 Supply current at HALT IDHT1 32 kHz oscillation operation without load Stop of oscillation without load, VDD = 5 V, Ta = 55 C 14.32 MHz oscillation without load, VDD = 5 V Stop of 14.32 MHz oscillation, VDD = 2.7 V 5 20 5 20 15 50 100 A A mA A Condition min 14.32 MHz operation without load, VDD = 5 V 1/1024 of 14.32 MHz operation without load, VDD = 3.0 V typ 60 2 max 100 5 mA mA Unit (Ta = 25 C 2 C , VSS = 0 V) A/D Converter Performance Limit Parameter Conversion relative error A/D Conversion Time Analog Input Voltage Symbol NLAD tAD fosc = 14.32 MHz 8 5 Condition min typ max 3 LSB s V Unit (Ta = 25 C 2 C ,VSS = 0 V) MAD00030FEM 96 www..com MN101D07G,MN101D07H Pin Assignment RCTLN RCTLP AVDD CTLA AVSS VRI VRO AFG FGF YPG(P91) YFG(PFG) PGMM(P92) VOW1(PA0) VOW2(PA1) VOW3(PA2) VOW4(PA3) VOB1(PA4) VOB2(PA5) PA6 SCOUT(P93) SECAM(PA7) SYOUT(P94) FSCLPF(PB0) FSCI(PB1) AFCLPG(PB2) AFCC(PB3) VDD2 SCIN(P95) CO TPZ(P90/AD12) AD13(PC4) AD11(PC3) AD10(PC2) AD9(PC1) AD8(PC0) AD7(P87) AD6(P86) AD5(P85) AD4(P84) AD3(P83) AD2(P82) AD1(P81) AD0(P80) VDD P77 P76 P75 P74 P73 P72 P71 P70 VSS ROTA(P67) HAMP(P66) DENV(P65) 84 86 82 81 80 79 78 77 76 75 74 73 72 71 70 69 68 67 66 65 64 63 62 61 60 59 58 57 85 86 87 88 89 90 91 92 93 94 95 96 97 98 99 100 101 102 103 104 105 106 107 108 109 110 111 112 MN101D07G MN101D07H 56 55 54 53 52 51 50 49 48 47 46 45 44 43 42 41 40 39 38 37 36 35 34 33 32 31 30 29 SYIN(P96) CVIN2(PB4) CVIN(PB5) VSS2 CVOUT(PB6) P97 HSYNC(PB7) VSYNC(P20) OSCO2(P21) OSCI2(P22) SXI XO(P23) XI(P24) VSS OSCI OSCO VDD SBUFD0/PWM4(P25) PWM0 PWM1 P57 SBUFD1(P11/PWM2) SBUFD2(P12/PWM3) SBUFD3(P13/FF15) SBUFD4(P14/TC3O) SBUFD5(P15/TC4I) SBUFD6(XDSCK/OSDH/P16) SBUFD7(XDSDAT/OSDV/OSCDIV/P17) Support Tool In-circuit Emulator Flash Memory Built-in Type PX-ICE101C / D + PX-PRB101D07-LQFP112-P-2020-M Type ROM (x 8-bit) RAM (x 8-bit) Minimum instruction execution time MN101DF07ZAL 224 K 6K 0.1397 s (at 4.0 V to 5.5 V, 14.32 MHz) 71.5 s (at 3.0 V to 5.5 V, fixed to 14.32 MHz internal division) 61 s (at 2.5 V to 5.5 V, 32.768 kHz) Package LQFP112-P-2020 *Lead-free MAD00030FEM IRQ0(P64) IRQ1(P63) IRQ2(P62) IRQ3(P61) IRQ4(P60) P56 P55 KEYIRQ4(P54) KEYIRQ3(P53) KEYIRQ2(P52) KEYIRQ1(P51) KEYIRQ0(P50) SBT1(P07) SBI1(P06) SBO1(P05) P03 SBT0(P02) SBI0(P01) SBO0(P00) SDA(P27) SCK(P26) HBUFD6/BUZZER(P46) HUBFD4(P44) HUBFD2/DAOUT(P42) HUBFD0(P40) HSW VLP NRST(P04) 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 LQFP112-P-2020 *Lead-free 97 www..com MN101D08E Type ROM (x 8-bit) x RAM (x 8-bit) x Package Minimum Instruction Execution Time Interrupts With main clock operated When sub-clock operated MN101D08E 80 K 2K LQFP080-P-1414A *Lead-free 0.1397 s (at 4.0 V to 5.5 V, 14.32 MHz) 71.5 s (at 2.7 V to 5.5 V fixed to 14.32 MHz internal frequency division) 61 s (at 2.5 V to 5.5 V, 32.768 kHz) * RESET * Runaway * External 0, 1, 2, 3, 4 * Timer 0 * Timer 1 * Timer 2 * Timer 3 * Timer 6 * Capstan FG * Control * HSW * Cylinder(Drum) FG * Servo V-sync * Synchronous output * OSD * XDS * Serial 1 * Serial 2 * PWM 4 * OSD V-sync Timer counter 0: 8-bit x 1 (timer function) Clock source ********************* 1/4, 1/16 of system clock frequency Interrupt source **************** overflow of timer counter 0 Timer counter 1: 8-bit x 1 (timer function, linear timer counter function) Clock source ********************* 1/4 of system clock frequency; CTL signal Interrupt source **************** overflow of timer counter 1 Timer counter 2: 16-bit x 1 (timer function, input capture (CTL specified edge), duty judgment of CTL signal) Clock source ********************* 1/4, 1/16, 1/24 of system clock frequency Interrupt source **************** overflow of timer counter 2; input of CTL specified edge; underflow of timer 2 shift register 4-bit counter; coincidence of timer 2 shift register with timer 2 shift register compare register Timer counter 3: 16-bit 1 (timer function) Clock source ********************* 1/4, 1/16 of system clock frequency Interrupt source **************** overflow of timer counter 3 Timer counter 5: 19-bit x 1 (watchdog, stable oscillation waiting function) Clock source ********************* system clock Watchdog interrupt source ** 1/216, 1/219 of timer counter 5 frequency Clear by stable oscillation ** after 256 counts by timer counter 5 (2 18 counts of OSC oscillation clock) Timer counter 6: 16-bit x 1 (clock function [max. 2 s]) Clock source ********************* 1/512 of OSC oscillation clock frequency; XI oscillation clock; 1/8, 1/128 of system clock frequency Interrupt source **************** 1/213, 1/214, 1/215 overflow of timer counter 6 Serial 1: 8-bit x 1 (synchronous type) (transfer direction of MSB/LSB selectable, start condition function) Clock source ********************* 1/8, 1/16, 1/32, 1/64, 1/128, 1/256 of system clock frequency; NSBT1 pin input Serial 2: 8-bit x 1 (I2C) (master transmission/reception, slave transmission/reception) Clock source ********************* 1/144 to 1/252 of system clock; SCK pin input Timer Counter Serial Interface MAD00032DEM 98 www..com MN101D08E OSD XDS ROM Correction I/O Pins A/D Inputs PWM ICR OCR Special Ports Notes I/O Input Display mode : Menu(Internal synchronized ) display, super impose(external synchronized) display Applicable broadcasting system : NTSC, PAL, PAL-M, PAL-N Screen configuration : 24 characters 2n rows (n = 1 to 6) Character type : max. 128 character types (variable, include special characters) Character size : 12 18 dots (Vertical direction: 1 dot for 2H at not enlargement.) Enlarged characters : each 2 settings in horizontal and vertical Character interpolation : none Line background color : 8-hue settable (settable in the row unit at menu display) Line background intensity : 8 gradations settable in the row unit Screen background color : 8-hue settable at menu display Character color : white Character intensity : 8 gradations settable in the row unit Frame function : 1-dot frame in 4 directions Frame intensity : 4 gradations settable in the row unit Blinking : none (covered by software) Inverted character : settable in the character unit Halftone : none Input : composite video signal input (output level: 1 V[p-p] / 2 V[p-p]) Clamp method : sync tip clamp, clamp level in 4 levels Output : composite video output Measure against image fluctuation: built-in AFC circuit Dot clock : 1/2 of OSC oscillation clock (automatic phase adjustment) Built-in U.S. closed caption data slicer (optional 1 line data can be extracted.) Correcting address designation: up to 3 addresses possible Correction method: correction program being saved in internal RAM 56 1 * Common use: 45 * Common use: 1 8-bit x 11-ch. (without S/H) 13-bit x 2-ch. (at repetition cycle 572 s at 14.32 MHz), 8-bit x 1-ch. (at repetition cycle 71.5 s, 0.572 ms, 1.14 ms, 2.29 ms at 14.32 MHz) 16-bit x 2-ch.(Speed system), 18-bit x 4-ch.(Phase system) 16-bit x 3 (Synchronous output x 2, Rec CTL x 1 ) 3-state output (PTO) VLP pin; CTL input; Capstan FG input; Cylinder(Drum) PG/FG inputs; HSW output; Head amp/ Rotary control outputs; output of 1/4 OSC oscillation clock (1 V[p-p]) See the next page for electrical characteristics, pin assignment and support tool. MAD00032DEM 99 www..com Electrical Characteristics Supply current Limit Parameter Symbol IDD1 Operating supply current IDD2 IDD3 32 kHz oscillation operation without load Supply current at STOP IDSP IDHT0 Supply current at HALT IDHT1 32 kHz oscillation operation without load Stop of oscillation without load, VDD = 5 V 14.32 MHz oscillation without load, VDD = 5 V Stop of 14.32 MHz oscillation, VDD = 2.7 V 5 20 5 10 15 A mA A Condition min 14.32 MHz operation without load, VDD = 5 V 1/1024 of 14.32 MHz operation without load, VDD = 2.7 V Stop of 14.32 MHz oscillation, VDD = 2.7 V 50 100 typ 50 2 max 100 5 mA mA A Unit (Ta = 25C 2C , VSS = 0 V) A/D Converter Performance Limit Parameter Conversion relative error A/D Conversion Time Analog Input Voltage Symbol NLAD tAD fosc = 14.32 MHz 8 5 Condition min typ max 3 LSB s V Unit (Ta = 25C 2C , VDD = 5.0 V, VSS = 0 V) MAD00032DEM 100 www..com MN101D08E 60 59 58 57 56 55 54 53 52 51 50 49 48 47 46 45 44 43 42 (PC0)AD8 (P87)AD7 (P86)AD6 (P85)AD5 (P84)AD4 (P83)AD3 (P82)AD2 (P81)AD1 (P80)AD0 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 41 C0 RCTLN RCTLP AVDD CTLA AVSS VRI VR0 AFG FGF YPG(PB7) YFG(PFG) FSCLPF(PB0) FSCI(PB1) AFCLPF(PB2) AFCC(PB3) VDD2 CVIN2(PB4) Pin Assignment AD10(PC2) AD9(PC1) 40 39 38 37 36 35 34 33 32 CVIN (PB5) P77 P76 P75 P74 P73 P72 P71 P70 (P67)ROTA (P66)HAMP (P65)DENV MN101D08E 31 30 29 28 27 26 25 24 23 22 21 VSS2 CVOUT (PB6) SXI X0 (P23) XI (P24) VSS OSCI OSC0 VDD PWM4(P25) PWM0 PWM1 SBUFD1(P11) SBUFD2(P12) SBUFD3(P13) SBUFD4(TC60/P14) SBUFD5(P15) SBUFD6(P16) SBUFD7(OSCDIV/P17) 10 11 12 13 14 15 16 17 18 19 (P64)IRQ0 HSW (P46)HBUFD6 (P44)HBUFD4 (P42)HBUFD2 (P40)HBUFD0 (P05)NSB01 (P07)NSBT1 (P26)SCK VLP P02 P01 P00 (P06)NSBI1 LQFP080-P-1414A *Lead-free Support Tool In-circuit Emulator Flash Memory Built-in Type PX-ICE101C / D + PX-PRB101D08-LQFP080-P-1414A Type ROM (x 8-bit) RAM (x 8-bit) Minimum instruction execution time MN101DF08G AL 128 K 4K 0.1397 s (at 4.0 V to 5.5 V, 14.32 MHz) 71.5 s (at 2.7 V to 5.5 V, fixed to 14.32 MHz internal division) 61 s (at 2.5 V to 5.5 V, 32.768 kHz) Package LQFP080-P-1414A *Lead-free MAD00032DEM (P04)NRST (P63)IRQ1 (P62)IRQ2 (P61)IRQ3 (P60)IRQ4 (P27)SDA 20 1 2 3 4 5 6 7 8 9 101 www..com MN101D09E Type ROM (x 8-bit) x RAM (x 8-bit) x Package Minimum Instruction Execution Time Interrupts With main clock operated When sub-clock operated MN101D09E 80 K 2K QFP100-P-1818B *Lead-free 0.1397 s (at 4.0 V to 5.5 V, 14.32 MHz) 71.5 s (at 2.7 V to 5.5 V fixed to 14.32 MHz internal frequency division) 61 s (at 2.5 V to 5.5 V, 32.768 kHz) * RESET * Runaway * External 0, 1, 2, 3, 4 * Timer 0 * Timer 1 * Timer 2 * Timer 3 * Timer 6 * Capstan FG * Control * HSW * Cylinder(Drum) FG * Servo V-sync * Synchronous output * OSD * XDS * Serial 1 * Serial 2 * PWM 4 * OSD V-sync Timer counter 0: 8-bit x 1 (timer function) Clock source ********************* 1/4, 1/16 of system clock frequency Interrupt source **************** overflow of timer counter 0 Timer counter 1: 8-bit x 1 (timer function, linear timer counter function) Clock source ********************* 1/4 of system clock frequency; CTL signal Interrupt source **************** overflow of timer counter 1 Timer counter 2: 16-bit x 1 (timer function, input capture (CTL specified edge), duty judgment of CTL signal) Clock source ********************* 1/4, 1/16, 1/24 of system clock frequency Interrupt source **************** overflow of timer counter 2; input of CTL specified edge; underflow of timer 2 shift register 4-bit counter; coincidence of timer 2 shift register with timer 2 shift register compare register Timer counter 3: 16-bit x 1 (timer function) Clock source ********************* 1/4, 1/16 of system clock frequency Interrupt source **************** overflow of timer counter 3 Timer counter 5: 19-bit x 1 (watchdog, stable oscillation waiting function) Clock source ********************* system clock Watchdog interrupt source ** 1/216, 1/219 of timer counter 5 frequency Clear by stable oscillation ** after 256 counts by timer counter 5 (2 18 counts of OSC oscillation clock) Timer counter 6: 16-bit x 1 (clock function [max. 2 s]) Clock source ********************* 1/512 of OSC oscillation clock frequency; XI oscillation clock; 1/8, 1/128 of system clock frequency Interrupt source **************** 1/213, 1/214, 1/215 overflow of timer counter 6 Timer Counter Serial Interface Serial 1: 8-bit x 1 (synchronous type) (transfer direction of MSB/LSB selectable, start condition function) Clock source ********************* 1/8, 1/16, 1/32, 1/64, 1/128, 1/256 of system clock frequency; NSBT1 pin input Serial 2: 8-bit x 1 (I2C) (master transmission/reception, slave transmission/reception) Clock source ********************* 1/144 to 1/252 of system clock; SCK pin input MAD00033DEM 102 www..com MN101D09E OSD Display mode : Applicable broadcasting system : Screen configuration : Character type : Character size : Enlarged characters : Character interpolation : Line background color : Line background intensity : Screen background color : Character color : Character intensity : Frame function : Frame intensity : Blinking : Inverted character : Halftone : Input : Clamp method : Output : Measure against image fluctuation: Dot clock : Menu(Internal synchronized ) display, super impose(external synchronized) display NTSC, PAL, PAL-M, PAL-N 24 characters 2n rows (n = 1 to 6) max. 128 character types (variable, include special characters) 12 18 dots (Vertical direction: 1 dot for 2H at not enlargement) each 2 settings in horizontal and vertical none 8-hue settable in the row unit at menu display 8 gradations settable in the row unit 8-hue settable at omenu display white 8 gradations settable in the row unit 1-dot frame in 4 directions 4 gradations settable in the row unit none (covered by software) settable in the character unit none composite video signal input (output level: 1 V[p-p] / 2 V[p-p]) sync tip clamp, clamp level in 4 levels composite video output built-in AFC circuit 1/2 of OSC oscillation clock (automatic phase adjustment) XDS ROM Correction I/O Pins A/D Inputs PWM ICR OCR Special Ports Notes I/O Input Built-in U.S. closed caption data slicer (optional 1 line data can be extracted.) Correcting address designation: up to 3 addresses possible Correction method: correction program being saved in internal RAM 56 1 * Common use: 45 * Common use: 1 8-bit x 11-ch. (without S/H) 13-bit x 2-ch. (at repetition cycle 572 s at 14.32 MHz), 8-bit x 1-ch. (at repetition cycle 71.5 s, 0.572 ms, 1.14 ms, 2.29 ms at 14.32 MHz) 16-bit x 2-ch.(Speed system), 18-bit x 4-ch.(Phase system) 16-bit x 3 (Synchronous output x 2, Rec CTL x 1 ) 3-state output (PTO) VLP pin; CTL input; Capstan FG input; Cylinder(Drum) PG/FG inputs; HSW output; Head amp/ Rotary control outputs; output of 1/4 OSC oscillation clock (1 V[p-p]) See the next page for electrical characteristics, pin assignment and support tool. MAD00033DEM 103 www..com Electrical Characteristics Supply current Limit Parameter Symbol IDD1 Operating supply current IDD2 IDD3 32 kHz oscillation operation without load Supply current at STOP IDSP IDHT0 Supply current at HALT IDHT1 32 kHz oscillation operation without load Stop of oscillation without load, VDD = 5 V 14.32 MHz oscillation without load, VDD = 5 V Stop of 14.32 MHz oscillation, VDD = 2.7 V 5 20 5 10 15 A mA A Condition min 14.32 MHz operation without load, VDD = 5 V 1/1024 of 14.32 MHz operation without load, VDD = 2.7 V Stop of 14.32 MHz oscillation, VDD = 2.7 V 50 100 typ 50 2 max 100 5 mA mA A Unit (Ta = 25C 2C , VSS = 0 V) A/D Converter Performance Limit Parameter Conversion relative error A/D Conversion Time Analog Input Voltage Symbol NLAD tAD fosc = 14.32 MHz 8 5 Condition min typ max 3 LSB s V Unit (Ta = 25C 2C , VDD = 5.0 V, VSS = 0 V) MAD00033DEM 104 www..com MN101D09E 75 74 73 72 71 70 69 68 67 66 65 64 63 62 61 60 59 58 57 56 55 54 53 52 51 RCTLN RCTLP AVDD CTLA AVSS VRI VRO AFG FGF YPG(PB7) YFG(PFG) N.C. N.C. N.C. N.C. N.C. N.C. N.C. N.C. N.C. FSCLPF(PB0) FSCI(PB1) AFCLPF(PB2) AFCC(PB3) VDD2 Pin Assignment Support Tool In-circuit Emulator Flash Memory Built-in Type PX-ICE101C / D + PX-PRB101D08-QFP100-P-1818B-M Type ROM (x 8-bit) RAM (x 8-bit) Minimum instruction execution time MN101DF09GAF 128 K 4K 0.1397 s (at 4.0 V to 5.5 V, 14.32 MHz) 71.5 s (at 2.7 V to 5.5 V, fixed to 14.32 MHz internal division) 61 s (at 2.5 V to 5.5 V, 32.768 kHz) Package QFP100-P-1818B *Lead-free MAD00033DEM IRQ0(P64) IRQ1(P63) IRQ2(P62) IRQ3(P61) IRQ4(P60) N.C. N.C. N.C. N.C. N.C. NSBT1(P07) NSBI1(P06) NSBO1(P05) P02 P01 P00 SDA(P27) SCK(P26) HBUFD6(P46) HBUFD4(P44) HBUFD2/(P42) HBUFD0(P40) HSW VLP NRST(P04) 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 CO N.C. N.C. AD10(PC2) AD9(PC1) AD8(PC0) AD7(P87) AD6(P86) AD5(P85) AD4(P84) AD3(P83) AD2(P82) AD1(P81) AD0(P80) P77 P76 P75 P74 P73 P72 P71 P70 ROTA(P67) HAMP(P66) DENV(P65) 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96 97 98 99 100 MN101D09E 50 49 48 47 46 45 44 43 42 41 40 39 38 37 36 35 34 33 32 31 30 29 28 27 26 CVIN2(PB4) CVIN(PB5) VSS2 CVOUT(PB6) N.C. N.C. N.C. N.C. SXI XO(P23) XI(P24) VSS OSCI OSCO VDD PWM4(P25) PWM0 PWM1 SBUFD1(P11) SBUFD2(P12) SBUFD3(P13) SBUFD4(TC60/P14) SBUFD5(P15) SBUFD6(P16) SBUFD7(OSCDIV/P17) QFP100-P-1818B *Lead-free 105 www..com MN101D10F , MN101D10G Type ROM (x 8-bit) x RAM (x 8-bit) x Package Minimum Instruction Execution Time Interrupts With main clock operated When sub-clock operated MN101D10F 96 K 2.5 K QFP100-P-1818B *Lead-free MN101D10G 128 K 3.5 K 0.1397 s (at 4.0 V to 5.5 V, 14.32 MHz) 71.5 s (at 2.7 V to 5.5 V fixed to 14.32 MHz internal frequency division) 61 s (at 2.5 V to 5.5 V, 32.768 kHz) * RESET * Runaway * External 0 * External 1 * External 2 * External 3 * External 4 * Timer 0 * Timer 1 * Timer 2 * Timer 3 * Timer 6 * Capstan FG * Control * HSW * Cylinder(Drum) FG * Servo V-sync * Synchronous output * OSD * XDS * Serial 0 * Serial 1 * Serial 2 * PWM 4 * OSDV-sync Timer counter 0: 8-bit x 1 (timer function) Clock source ********************* 1/4, 1/16 of system clock frequency Interrupt source ***************** overflow of timer counter 0 Timer counter 1: 8-bit x 1 (timer function, linear timer counter function) Clock source ********************* 1/4 of system clock frequency; CTL signal Interrupt source ***************** overflow of timer counter 1 Timer counter 2: 16-bit x 1 (timer function, input capture,duty judgment of CTL signal(VISS/VASS detection function), generation of remote control output carrier frequency) Clock source ********************* 1/4, 1/16, 1/24 of system clock frequency Interrupt source ***************** overflow of timer counter 2; input of CTL specified edge; underflow of timer 2 shift register 4-bit counter; coincidence of timer 2 shift register with timer 2 shift register compare register Timer counter 3: 16-bit x 1 (timer function, generation of serial transmission clock) Clock source ********************* 1/4, 1/16 of system clock frequency Interrupt source ***************** overflow of timer counter 3 Timer counter 5: 19-bit x 1 (watchdog, stable oscillation waiting function) Clock source ********************* system clock Watchdog interrupt source *** 1/2 16, 1/219 of timer counter 5 frequency Clear by stable oscillation *** after 256 counts by timer counter 5 (2 18 counts of OSC oscillation clock) Timer counter 6: 16-bit x 1 (clock function [max. 2 s]) Clock source ********************* 1/512 of OSC oscillation clock frequency; XI oscillation clock; 1/8, 1/128 of system clock frequency Interrupt source ***************** 1/213, 1/2 14, 1/215 overflow of timer counter 6 Serial 0: 8-bit x 1 (synchronous type) (transfer direction of MSB/LSB selectable, start condition function) Clock source ********************* 1/8, 1/16, 1/32, 1/64, 1/128, 1/256 of system clock frequency; NSBT0 pin input Serial 1: 8-bit x 1 (synchronous type/remote control transmission) (transfer direction of MSB/LSB selectable, start condition function) Clock source ********************* 1/8, 1/16, 1/32, 1/64, 1/128, 1/256 of system clock frequency; 2-division timer 3 output; NSBT1 pin input Remote control clock ******* 2-division timer 3 output Serial 2: 8-bit x 1 (I 2C) (master transmission/reception, slave transmission/reception) Clock source ********************* 1/144 to 1/252 of system clock; SCK pin input Timer Counter Serial Interface MAD00043BEM 106 www..com MN101D10F, MN101D10G OSD Display mode Applicable broadcasting system Screen configuration Character type Character size Enlarged characters Character interpolation Line background color Line background intensity Screen background color : Character color Character intensity Border function Border brightness Blinking Inverted character Halftone Input Clamp method Output Measure against image fluctuation Dot clock MESECAM compatibility : : : : : : : : : : : : : : : : : : : : : : : menu(intermal synchronized) display, superimpose(externally synchronized) display NTSC, PAL, PAL-M, PAL-N 24 characters x 2n rows (n = 1 to 6) max. 256 character types (variable, include special characters) 12 x 18 dots (vertical direction: 1 dot for 2H at not enlargement) each x 2 settings in horizontal and vertical none 8-hue settable in the row unit at menu display 8 gradations settable in the row unit 8-huesettable at menu display white 8 gradations settable in the row unit 1-dot border in 8 directions 4 gradations settable in the row unit none (covered by software) settable in the character unit none composite video signal input (output level: 1 V[p-p] / 2 V[p-p]) sync tip clamp, clamp level in 4 levels composite video output built-in AFC circuit 1/2 of OSC oscillation clock (automatic phase adjustment) Subcarrier leak function for superimpose display XDS ROM Correction I/O Pins A/D Inputs PWM ICR OCR Special Ports Notes I/O Input Built-in U.S. closed caption data slicer (optional 1 line data can be extracted.) Correcting address designation: up to 3 addresses possible Correction method: correction program being saved in internal RAM 76 1 * Common use: 56 * Common use: 1 8-bit x 12-ch. (without S/H) 13-bit x 2-ch. (at repetition cycle 572 s at 14.32 MHz), 8-bit x 1-ch. (at repetition cycle 35.7 s, 0.572 ms, 1.14 ms, 2.29 ms at 14.32 MHz) 16-bit x 2-ch.(Speed system), 18-bit x 4-ch.(Phase system) 16-bit x 3 (Synchronous output x 2, Rec CTL x 1 ) 3-state output (PTO) VLP pin; CTL input;Capstan FG input; Cylinder(Drum) PG/FG inputs; HSW output; Head amp/ Rotary outputs; built-in FG amp; output of 1/4 OSC oscillation clock (1 V[p-p]) See the next page for electrical characteristics, pin assignment and support tool. MAD00043BEM 107 www..com Electrical Characteristics Supply current Limit Parameter Symbol IDD1 Operating supply current IDD2 IDD3 32 kHz oscillation operation without load Supply current at STOP IDSP IDHT0 Supply current at HALT IDHT1 32 kHz oscillation operation without load Stop of oscillation without load, VDD = 5 V, Ta = 55 C 14.32 MHz oscillation without load, VDD = 5 V Stop of 14.32 MHz oscillation, VDD = 2.7 V 5 20 5 10 15 A mA A Condition min 14.32 MHz operation without load, VDD = 5 V 1/1024 of 14.32 MHz operation without load, VDD = 2.7 V Stop of 14.32 MHz oscillation, VDD = 2.7 V 50 100 typ 50 2 max 100 5 mA mA A Unit (Ta = 25 C 2 C , VSS = 0 V) A/D Converter Performance Limit Parameter Conversion relative error A/D Conversion Time Analog Input Voltage Symbol NLAD tAD fosc = 14.32 MHz 8 5 Condition min typ max 3 LSB s V Unit (Ta = 25 C 2 C , VDD = 5.0 V, VSS = 0 V) MAD00043BEM 108 www..com MN101D10F, MN101D10G 75 74 73 72 71 70 69 68 67 66 65 64 63 62 61 60 59 58 57 56 55 54 53 52 51 RCTLN RCTLP AVDD CTLA AVSS VRI VRO AFG FGF YPG(P91) YFG(PFG) P92 PA0 PA1 PA2 PA3 PA4 PA5 PA6 SECAM(PA7) FSCLPF(PB0) FSCI(PB1) AFCLPF(PB2 AFCC(PB3) VDD2 Pin Assignment Support Tool In-circuit Emulator Flash Memory Built-in Type PX-ICE101C / D + PX-PRB101D10-QFP100-P-1818B-CN-M Type ROM (x 8-bit) RAM (x 8-bit) Minimum instruction execution time MN101DF10GAF 128 K 4K 0.1397 s (at 4.0 V to 5.5 V, 14.32 MHz) 71.5 s (at 2.7 V to 5.5 V, fixed to 14.32 MHz internal division) 61 s (at 2.5 V to 5.5 V, 32.768 kHz) Package QFP100-P-1818B *Lead-free MAD00043BEM IRQ0(P64) IRQ1(P63) IRQ2(P62) IRQ3(P61) IRQ4(P60) P54 P53 P52 P51 NSDO(P50) NSBT1(P07) NSBI1(P06) NSBO1(P05) NSBT0(P02) NSBI0(P01) NSBO0(P00) SDA(P27) SCK(P26) HBUFD6(P46) HBUFD4(P44) HBUFD2(P42) HBUFD0(P40) HSW VLP NRST(P04) 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 CO P90 AD11(PC3) AD10(PC2) AD9(PC1) AD8(PC0) AD7(P87) AD6(P86) AD5(P85) AD4(P84) AD3(P83) AD2(P82) AD1(P81) AD0(P80) P77 P76 P75 P74 P73 P72 P71 P70 ROTA(P67) HAMP(P66) DENV(P65) 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96 97 98 99 100 MN101D10G MN101D10F 50 49 48 47 46 45 44 43 42 41 40 39 38 37 36 35 34 33 32 31 30 29 28 27 26 CVIN2(PB4) CVIN(PB5) VSS2 CVOUT(PB6) PB7 P20 P21 P22 SXI XO(P23) XI(P24) VSS OSCI OSCO VDD SBUFD0(P25/PWM4) PWM0 PWM1 SBUFD1(P11) SBUFD2(P12) SBUFD3(P13) SBUFD4(P14/TC6O) SBUFD5(P15) SBUFD6(OSDH/P16/XDSCK) SBUFD7(OSDV/P17/OSCDIV/XDSDAT QFP100-P-1818B *Lead-free 109 www..com MN101C07A Type ROM (x8-bit) x RAM (x 8-bit) x Package Minimum Instruction Execution Time Interrupts MN101C07A 32 K 1K LQFP064-P-1414 *Lead-free 0.25 s (at 2.7 V to 5.5 V, 8 MHz) 125 s (at 2.7 V to 5.5 V, 32 kHz) * RESET * Watchdog * External 0 * External 1 * External 2 * External 3 * External 4 * Timer 2 * Timer 3 * Timer 4 * Timer 5 * Time base * Serial 0 * Serial 1 * Automatic transfer finish * A/D conversion finish * Key scan Timer counter 2 : 8-bit x 1 (square-wave/8-bit PWM output, event count, synchronous output event) Clock source ********************* 1/1, 1/4 of system clock frequency; 1/1 of XI oscillation clock frequency; external clock input Interrupt source **************** coincidence with compare register 2 Timer counter 3 : 8-bit x 1 (square-wave output, event count, generation of remote control carrier, serial 0 baud rate timer) Clock source ********************* 1/4, 1/16 of system clock frequency; 1/1 of OSC oscillation clock frequency; external clock input Interrupt source **************** coincidence with compare register 3 Timer counter 2, 3 can be cascade-connected. Timer counter 4 : 16-bit x 1 (square-wave/16-bit PWM output, event count, synchronous output event, input capture) Clock source ********************* 1/4, 1/16 of system clock frequency; 1/1 of OSC oscillation clock frequency; external clock input Interrupt source **************** coincidence with compare register 4 Time base timer (one-minute count setting, independently operable 8-bit timer counter 5) Clock source ********************* 1/4 of system clock frequency; 1/1, 1/8192 of OSC oscillation clock frequency; 1/1, 1/8192 of XI oscillation clock frequency Interrupt source **************** coincidence with compare register 5; 1/8192 prescaler overflow Watchdog timer Interrupt source **************** 1/2097152 of system clock frequency Timer Counter Serial Interface Serial 0 : synchronous type/simple UART (half-duplex) x 1 Clock source ********************* 1/2, 1/4, 1/16 of system clock frequency; 1/2 of timer counter 3 frequency Serial 1 : synchronous type x 1 Clock source ********************* 1/2, 1/8, 1/64 of system clock frequency; 1/2 of timer counter 3 frequency I/O Pins I/O High Voltage 27 26 * Common use : 21 * Specified pull-up resistor avaiable * Input/output selectable (bit unit) * Output: 18 * I/O: 8 * P-ch open drain (breakdown voltage -30 V): FL drive: 26 * Specified pull-down resistor mask option: 8 A/D Inputs FL Special Ports 8-bit x 5-ch. (with S/H) (8 to 16) segments x (18 to 10) digits Buzzer output, remote control carrier signal output MAD00023DEM 110 www..com MN101C07A Electrical Characteristics Supply current Limit Parameter Symbol IDD1 Operating supply current IDD2 Supply current at HALT Supply current at STOP IDD3 IDD4 fx = 32 kHz, VDD = 3 V fx = 32 kHz, VDD = 3 V VDD = 3 V 120 10 10 Condition min fosc = 8 MHz, VDD = 5 V typ max 25 mA A A A Unit Pin Assignment P70(SEG7/DG0) P71(SEG6/DG1) P72(SEG5/DG2) P73(SEG4/DG3) P74(SEG3/DG4) P75(SEG2/DG5) P76(SEG1/DG6) P77(SEG0/DG7) P40(DGT8) P41(DGT9) P60(DGT10) P61(DGT11) P62(DGT12) P63(DGT13) P64(DGT14) P65(DGT15) 48 47 46 45 44 43 42 41 40 39 38 37 36 35 34 (SEG8)P87 (SEG9)P86 (SEG10)P85 (SEG11)P84 (SEG12)P83 (SEG13)P82 (SEG14)P81 (SEG15)P80 VPP (TXD,SBO0)P00 (RXD,SBI0)P01 (SBT0)P02 (SBO1)P03 (SBI1)P04 (SBT1)P05 (BUZZER)P06 33 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 32 31 30 29 28 27 26 25 MN101C07A 24 23 22 21 20 19 18 17 P66(DGT16) P67(DGT17) P54 P53 P52 P51 P50 P24(IRQ4) P23(IRQ3) P22(IRQ2) P21(IRQ1) P20(IRQ0) P14(TM4IO) P13(TM3IO) P12(TM2IO) P11 10 11 12 13 14 15 Support Tool In-circuit Emulator EPROM Built-in Type PX-ICE101C / D + PX-PRB101C07-LQFP064-P-1414 Type ROM (x 8-bit) RAM (x 8-bit) Minimum instruction execution time MN101CP07D 64 K 2K 0.25 s (at 2.7 V to 5.5 V, 8 MHz) 125 s (at 2.7 V to 5.5 V, 32 kHz) Package LQFP064-P-1414 *Lead-free MAD00023DEM VREF(AN0)PA0 (AN1)PA1 (AN2)PA2 (AN3)PA3 (AN4)PA4 VREF+ VDD OSC2 OSC1 VSS XI XO MMOD (NRST)P27 (RMOUT)P10 LQFP064-P-1414 *Lead-free 16 1 2 3 4 5 6 7 8 9 111 www..com MN101C35D Type ROM (x8-bit) x RAM (x 8-bit) x Package Minimum Instruction Execution Time Interrupts MN101C35D 64 K 2K QFP100-P-1818B *Lead-free 0.25 s (at 2.7 V to 5.5 V, 8 MHz) 125 s (at 2.2 V to 5.5 V, 32 kHz)* * The lower limit for operation guarantee for EPROM built-in type is 2.7 V. * RESET * Watchdog * External 0 * External 1 * External 2 * External 3 * External 4 * Timer 0 * Timer 1 * Timer 2 * Timer 3 * Timer 4 * Timer 5 * Time base * Serial 0 * Serial 1 * Serial 2 * Automatic transfer finish * A/D conversion finish * Key scan Timer counter 0 : 8-bit x 1 (square-wave/8-bit PWM output, event count, generation of remote control carrier) Clock source ********************* 1/1, 1/4 of system clock frequency; 1/1 of OSC oscillation clock frequency; external clock input Interrupt source **************** coincidence with compare register 0 Timer counter 1 : 8-bit x 1 (square-wave output, event count, synchronous output event) Clock source ********************* 1/16, 1/64 of system clock frequency; 1/1 of XI oscillation clock frequency; external clock input Interrupt source **************** coincidence with compare register 1 Timer counter 0, 1 can be cascade-connected. Timer counter 2 : 8-bit x 1 (square-wave/8-bit PWM output, event count, synchronous output event) Clock source ********************* 1/1, 1/4 of system clock frequency; 1/1 of XI oscillation clock frequency; external clock input Interrupt source **************** coincidence with compare register 2 Timer counter 3 : 8-bit x 1 (square-wave output, event count, generation of remote control carrier, serial 0 baud rate timer) Clock source ********************* 1/4, 1/16 of system clock frequency; 1/1 of OSC oscillation clock frequency; external clock input Interrupt source **************** coincidence with compare register 3 Timer counter 2, 3 can be cascade-connected. Timer counter 4 : 16-bit x 1 (square-wave/16-bit PWM output, event count, synchronous output event, input capture) Clock source ********************* 1/4, 1/16 of system clock frequency; 1/1 of OSC oscillation clock frequency; external clock input Interrupt source **************** coincidence with compare register 4 Time base timer (one-minute count setting, independently operable 8-bit timer counter 5) Clock source ********************* 1/4 of system clock frequency; 1/1, 1/8192 of OSC oscillation clock frequency; 1/1, 1/8192 of XI oscillation clock frequency Interrupt source **************** coincidence with compare register 5; 1/8192 prescaler overflow Watchdog timer Interrupt source **************** 1/2097152 of system clock frequency Timer Counter Serial Interface Serial 0 : synchronous type/simple UART (half-duplex) x 1 Clock source ********************* 1/2, 1/4, 1/16 of system clock frequency; 1/2 of timer counter 3 frequency Serial 1 : synchronous type x 1 Clock source ********************* 1/2, 1/8, 1/64 of system clock frequency; 1/2 of timer counter 3 frequency Serial 2 : synchronous type/simple I2C x 1 Clock source ********************* 1/1, 1/2, 1/4 of system clock frequency; 1/2 of timer counter 0 frequency MAD00024DEM 112 www..com MN101C35D I/O Pins I/O High Voltage 36 53 * Common use : 28 * Specified pull-up resistor available * Input/output selectable (bit unit) * Output: 29 * I/O: 24 * P-ch open drain (breakdown voltage -30V): FL drive: 53 * Specified pull-down resistor mask option: 35 A/D Inputs FL Special Ports Electrical Characteristics Supply current 8-bit x 8-ch. (with S/H) (35 to 43) segments x (18 to 10) digits Buzzer output, remote control carrier signal output Limit Parameter Symbol IDD1 Operating supply current IDD2 Supply current at HALT Supply current at STOP IDD3 IDD4 fx = 32 kHz, VDD = 3 V fx = 32 kHz, VDD = 3 V VDD = 3 V 120 10 10 Condition min fosc = 8 MHz, VDD = 5 V typ max 25 mA A A A Unit Pin Assignment P70(SEG7/DGT0) P71(SEG6/DGT1) P72(SEG5/DGT2) P73(SEG4/DGT3) P74(SEG3/DGT4) P75(SEG2/DGT5) P76(SEG1/DGT6) P77(SEG0/DGT7) P60(DGT10) P61(DGT11) 53 P62(DGT12) 52 75 74 73 72 71 70 69 68 67 66 65 64 63 62 61 60 59 58 57 56 55 54 P94(SEG19) P93(SEG20) P92(SEG21) P91(SEG22) P90(SEG23) PC2(SEG24) PC1(SEG25) PC0(SEG26) PB7(SEG27) PB6(SEG28) PB5(SEG29) PB4(SEG30) PB3(SEG31) PB2(SEG32) PB1(SEG33) PB0(SEG34) PD7(SEG35) PD6(SEG36) PD5(SEG37) PD4(SEG38) PD3(SEG39) PD2(SEG40) PD1(SEG41) PD0(SEG42) VPP 51 P63(DGT13) P95(SEG18) P96(SEG17) P97(SEG16) P80(SEG15) P81(SEG14) P82(SEG13) P83(SEG12) P84(SEG11) P85(SEG10) P40(DGT8) P41(DGT9) P86(SEG9) P87(SEG8) 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96 97 98 99 100 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 1 2 3 4 5 6 7 8 9 50 49 48 47 46 45 44 43 42 41 40 39 P64(DGT14) P65(DGT15) P66(DGT16) P67(DGT17) P54 P53 P52 P51 P50 P32(SBT2) P31(SBI2) P30(SBO2) P25 P24(IRQ4) P23(IRQ3) P22(IRQ2) P21(SENS,IRQ1) P20(IRQ0) P15 P14(TM4IO) P13(TM3IO) P12(TM2IO) P11(TM1IO) P10(RMOUT,TM0IO) P27(NRST) MN101C35D 38 37 36 35 34 33 32 31 30 29 28 27 26 25 (TXD,SBO0)P00 (RXD,SBI0)P01 (SBI1)P04 (DK,BUZZER)P06 (SBT0)P02 (SBT1)P05 OSC2 OSC1 VSS (AN0)PA0 (AN1)PA1 (AN2)PA2 (AN3)PA3 (AN4)PA4 (AN5)PA5 (AN6)PA6 (AN7)PA7 (SBO1)P03 VREF- QFP100-P-1818B *Lead-free MMOD VREF+ VDD P07 XI XO See the next page for support tool. MAD00024DEM 113 www..com Support Tool In-circuit Emulator EPROM Built-in Type PX-ICE101C / D + PX-PRB101C35-QFP100-P-1818B Type ROM (x 8-bit) RAM (x 8-bit) Minimum instruction execution time MN101CP35D 64 K 2K 0.25 s (at 2.7 V to 5.5 V, 8 MHz) 125 s (at 2.7 V to 5.5 V, 32 kHz) Package QFP100-P-1818B *Lead-free MAD00024DEM 114 www..com MN101C35D MAD00024DEM 115 www..com MN101C87A , MN101C87D Type ROM (x 8-bit) x RAM (x 8-bit) x Package Minimum Instruction Execution Time MN101C87A 32 K 1.5 K LQFP064-P-1414 *Lead-free 0.1 s (at 4.5 V to 5.5 V, 20 MHz) 0.24 s (at 2.7 V to 5.5 V, 8.4 MHz) 0.48 s (at 2.3 V to 5.5 V, 4.19 MHz) * 0.24 s (at 2.0 V to 5.5 V, 2.0 MHz)* 62.5 s (at 2.0 V to 5.5 V, 32 kHz) * * The lower limit for operation guarantee for EEPROM built-in type is 2.5 V * RESET * Watchdog * External 0 * External 1 * External 2 * External 3 * External 4 * Timer 0 * Timer 1 * Timer 2 * Timer 3 * Timer 6 * Time base * Timer 7 (2 systems) * Serial 0 (2 systems) * Serial 2 * A/D conversion finish * Automatic transfer finish * FL display key scan * FL display dimmer Timer counter 0 : 8-bit x 1 (square-wave/8-bit PWM output, event count, generation of remote control carrier, simple pulse width measurement) Clock source ********************* 1/2, 1/4 of system clock frequency; 1/1, 1/4, 1/16, 1/32, 1/64 of OSC oscillation clock frequency; 1/1 of XI oscillation clock frequency; external clock input Interrupt source ***************** coincidence with compare register 0 Timer counter 1 : 8-bit x 1 (square-wave output, event count, serial transfer clock) Clock source ********************* 1/2, 1/8 of system clock frequency; 1/1, 1/4, 1/16, 1/64, 1/128 of OSC oscillation clock frequency; 1/1 of XI oscillation clock frequency; external clock input Interrupt source ***************** coincidence with compare register 1 Timer counter 0, 1 can be cascade-connected. Timer counter 2 : 8-bit x 1 (square-wave output, PWM output, serial transfer clock, event count, simple pulse width measurement) Clock source ********************* 1/2, 1/4 of system clock frequency; 1/1, 1/4, 1/16, 1/32, 1/64 of OSC oscillation clock frequency; 1/1 of XI oscillation clock frequency; external clock input Interrupt source ***************** coincidence with compare register 2 Timer counter 3 : 8-bit x 1 (square-wave output, event count, generation of remote control carrier, serial transfer clock) Clock source ********************* 1/2, 1/8 of system clock frequency; 1/1, 1/4, 1/16, 1/64, 1/128 of OSC oscillation clock frequency; 1/1 of XI oscillation clock frequency; external clock input Interrupt source ***************** coincidence with compare register 3 Timer counter 2, 3 can be cascade-connected. Timer counter 6 : 8-bit freerun timer Clock source ********************* 1/1 of system clock frequency; 1/1, 1/128, 1/8192 of OSC oscillation clock frequency; 1/1, 1/128, 1/8192 of XI oscillation clock frequency Interrupt source ***************** coincidence with compare register 6 Timer counter 7 : 16-bit x 1 (square-wave output, 16-bit PWM output (cycle / duty continuous variable), event count, pulse width measurement, input capture) Clock source ********************* 1/1, 1/2, 1/4, 1/16 of system clock frequency; 1/1, 1/2, 1/4, 1/16 of OSC oscillation clock frequency; 1/1, 1/2, 1/4, 1/16 of external clock input frequency Interrupt source ***************** coincidence with compare register 7 (2 lines) MN101C87D (under planning) 64 K 2K Interrupts Timer Counter MAD00050CEM 116 www..com MN101C87A , MN101C87D Timer Counter (Continue) Time base timer (one-minute count setting) Clock source ********************* 1/1 of OSC oscillation clock frequency; 1/1 of XI oscillation clock frequency Interrupt source ***************** 1/128, 1/256, 1/512, 1/1024, 1/8192, 1/32768, of clock source frequency Watchdog timer Interrupt source ***************** 1/65536, 1/262144, 1/1048576 of system clock frequency DMA Controller (Automatic Data Transfer) Serial Interface Max. Transfer cycles : 255 Starting factor : external request, various types of interrupt, software Transfer mode : 1-byte transfer, word transfer, burst transfer Serial 0 : synchronous type/UART (full-duplex) x 1 Clock source ********************* 1/2, 1/4 of system clock frequency; pulse output of timer counter 1 or 2; 1/2, 1/4, 1/16, 1/64 of OSC oscillation clock frequency, external clock Serial 2 : synchronous type/single-master I2C x 1 Clock source ********************* 1/2, 1/4 of system clock frequency; pulse output of timer counter 2 or 3; 1/2, 1/4, 1/16, 1/32 of OSC oscillation clock frequency, external clock I/O Pins I/O High voltage 26 26 * Common use * Specified pull-up resistor available * Input/output selectable (bit unit) * Output: 18 * I/O: 8 * P-ch. open drain (breakdown voltage -30 V) : FL drive: 26 * Specified pull-down resistor mask option: 16 A/D Inputs FL Special Ports Pin Assignment 10-bit x 8-ch. (with S/H) (8 to 16) segments x (18 to 10) digits Buzzer output, high-current drive port P70 / SEG7 / DGT0 P71 / SEG6 / DGT1 P72 / SEG5 / DGT2 P73 / SEG4 / DGT3 P74 / SEG3 / DGT4 P75 / SEG2 / DGT5 P76 / SEG1 / DGT6 P77 / SEG0 / DGT7 P60 / DGT10 P61 / DGT11 P62 / DGT12 P63 / DGT13 35 P64 / DGT14 34 48 47 46 45 44 43 42 41 40 39 38 37 36 P87 / SEG8 P86 / SEG9 P85 / SEG10 P84 / SEG11 P83 / SEG12 P82 / SEG13 P81 / SEG14 P80 / SEG15 VPP P00 / SBO0 / TXD P01 / SBI0 / RXD P02 / SBT0 P03 / SBO2 / SDA P04 / SBI2 / AN7 P05 / SBT2 / SCL P06 / BUZZER / AN6 33 P65 / DGT15 P40 / DGT8 P41 / DGT9 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 32 31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 DGT16 / P66 DGT17 / P67 VDD3 VDD2 LED2 / P52 LED1 / P51 LED0 / P50 IRQ4 / P24 IRQ3 / P23 IRQ2 / P22 ACZ / IRQ1 / P21 IRQ0 / P20 TM7IO / P14 DROUT / TM3IO / P13 TM2IO / P12 TM1IO / P11 MN101C87A MN101C87D 10 11 12 13 14 MMOD 15 NRST / P27 LQFP064-P-1414 *Lead-free RMOUT / TM0IO / P10 AN5 / PA5 AN4 / PA4 AN3 / PA3 AN2 / PA2 AN1 / PA1 AN0 / PA0 VREF+ VDD1 OSC2 OSC1 VSS XI XO 16 1 2 3 4 5 6 7 8 9 See the next page for pin assignment and support tool. MAD00050CEM 117 www..com Support Tool In-circuit Emulator Flash Memory Built-in Type PX-ICE101C / D + PX-PRB101C87-LQFP064-P-1414-M Type ROM (x 8-bit) RAM (x 8-bit) Minimum instruction execution time MN101CF87G 128 K 4K 0.1 s (at 4.5 V to 5.5 V, 20 MHz) 0.24 s (at 2.7 V to 5.5 V, 8.4 MHz) 0.48 s (at 2.5 V to 5.5 V, 4.19 MHz) 62.5 s (at 2.5 V to 5.5 V, 32 kHz) Package LQFP064-P-1414 *Lead-free MAD00050CEM 118 www..com MN101C87A , MN101C87D MAD00050CEM 119 www..com MN101C88D , MN101C88F , MN101C88G Type ROM (x 8-bit) x RAM (x 8-bit) x Package Minimum Instruction Execution Time MN101C88D (under planning) 64 K 2K MN101C88F (under planning) 96 K 4K QFP100-P-1818B *Lead-free 0.1 s (at 4.5 V to 5.5 V, 20 MHz) 0.24 s (at 2.7 V to 5.5 V, 8.4 MHz) 0.48 s (at 2.3 V to 5.5 V, 4.19 MHz) * 0.24 s (at 2.0 V to 5.5 V, 2.0 MHz)* 62.5 s (at 2.0 V to 5.5 V, 32 kHz) * * The lower limit for operation guarantee for EEPROM built-in type is 2.5 V * RESET * Watchdog * External 0 * External 1 * External 2 * External 3 * External 4 * Timer 0 * Timer 1 * Timer 2 * Timer 3 * Timer 6 * Time base * Timer 7 (2 systems) * Serial 0 (2 systems) * Serial 1 (2 systems) * Serial 2 * A/D conversion finish * Automatic transfer finish * FL display key scan * FL display dimmer Timer counter 0 : 8-bit x 1 (square-wave/8-bit PWM output, event count, generation of remote control carrier, simple pulse width measurement) Clock source ********************* 1/2, 1/4 of system clock frequency; 1/1, 1/4, 1/16, 1/32, 1/64 of OSC oscillation clock frequency; 1/1 of XI oscillation clock frequency; external clock input Interrupt source ***************** coincidence with compare register 0 Timer counter 1 : 8-bit x 1 (square-wave output, event count, serial transfer clock) Clock source ********************* 1/2, 1/8 of system clock frequency; 1/1, 1/4, 1/16, 1/64, 1/128 of OSC oscillation clock frequency; 1/1 of XI oscillation clock frequency; external clock input Interrupt source ***************** coincidence with compare register 1 Timer counter 0, 1 can be cascade-connected. Timer counter 2 : 8-bit x 1 (square-wave output, PWM output, serial transfer clock, event count, simple pulse width measurement) Clock source ********************* 1/2, 1/4 of system clock frequency; 1/1, 1/4, 1/16, 1/32, 1/64 of OSC oscillation clock frequency; 1/1 of XI oscillation clock frequency; external clock input Interrupt source ***************** coincidence with compare register 2 Timer counter 3 : 8-bit x 1 (square-wave output, event count, generation of remote control carrier, serial transfer clock) Clock source ********************* 1/2, 1/8 of system clock frequency; 1/1, 1/4, 1/16, 1/64, 1/128 of OSC oscillation clock frequency; 1/1 of XI oscillation clock frequency; external clock input Interrupt source ***************** coincidence with compare register 3 Timer counter 2, 3 can be cascade-connected. Timer counter 6 : 8-bit freerun timer Clock source ********************* 1/1 of system clock frequency; 1/1, 1/128, 1/8192 of OSC oscillation clock frequency; 1/1, 1/128, 1/8192 of XI oscillation clock frequency Interrupt source ***************** coincidence with compare register 6 Timer counter 7 : 16-bit x 1 (square-wave output, 16-bit PWM output (cycle / duty continuous variable), event count, pulse width measurement, input capture) Clock source ********************* 1/1, 1/2, 1/4, 1/16 of system clock frequency; 1/1, 1/2, 1/4, 1/16 of OSC oscillation clock frequency; 1/1, 1/2, 1/4, 1/16 of external clock input frequency Interrupt source ***************** coincidence with compare register 7 (2 lines) MN101C88G 128 K 4K Interrupts Timer Counter MAD00051CEM 120 www..com MN101C88D, MN101C88F , MN101C88G Timer Counter (Continue) Time base timer (one-minute count setting) Clock source ********************* 1/1 of OSC oscillation clock frequency; 1/1 of XI oscillation clock frequency Interrupt source ***************** 1/128, 1/256, 1/512, 1/1024, 1/8192, 1/32768, of clock source frequency Watchdog timer Interrupt source ***************** 1/65536, 1/262144, 1/1048576 of system clock frequency DMA Controller (Automatic Data Transfer) Serial Interface Max. Transfer cycles : 255 Starting factor : external request, various types of interrupt, software Transfer mode : 1-byte transfer, word transfer, burst transfer Serial 0 : synchronous type/UART (full-duplex) x 1 Clock source ********************* 1/2, 1/4 of system clock frequency; pulse output of timer counter 1 or 2; 1/2, 1/4, 1/16, 1/64 of OSC oscillation clock frequency, external clock Serial 1 : synchronous type/UART (full-duplex) x 1 Clock source ********************* 1/2, 1/4 of system clock frequency; pulse output of timer counter 1 or 2; 1/2, 1/4, 1/16, 1/64 of OSC oscillation clock frequency, external clock Serial 2 : synchronous type/single-master I2C x 1 Clock source ********************* 1/2, 1/4 of system clock frequency; pulse output of timer counter 2 or 3; 1/2, 1/4, 1/16, 1/32 of OSC oscillation clock frequency, external clock I/O Pins I/O High voltage 35 53 * Common use * Specified pull-up resistor available * Input/output selectable (bit unit) * Output: 29 * I/O: 24 * P-ch. open drain (breakdown voltage -30 V) : FL drive: 53 * Specified pull-down resistor mask option: 35 A/D Inputs FL Special Ports ROM Correction 10-bit x 8-ch. (with S/H) (35 to 43) segments x (18 to 10) digits Buzzer output, high-current drive port Correcting address designation : up to 3 addresses possible See the next page for pin assignment and support tool. MAD00051CEM 121 www..com Pin Assignment PB6 / SEG28 PB7 / SEG27 PC0 / SEG26 PC1 / SEG25 PC2 / SEG24 P90 / SEG23 P91 / SEG22 P92 / SEG21 P93 / SEG20 P94 / SEG19 P95 / SEG18 P96 / SEG17 P97 / SEG16 P80 / SEG15 P81 / SEG14 P82 / SEG13 P83 / SEG12 P84 / SEG11 P85 / SEG10 P86 / SEG9 P87 / SEG8 P70 / SEG7 / DGT0 P71 / SEG6 / DGT1 P72 / SEG5 / DGT2 P73 / SEG4 / DGT3 75 74 73 72 71 70 69 68 67 66 65 64 63 62 61 60 59 58 57 56 55 54 53 52 PB5 / SEG29 PB4 / SEG30 PB3 / SEG31 PB2 / SEG32 PB1 / SEG33 PB0 / SEG34 PD7 / SEG35 PD6 / SEG36 PD5 / SEG37 PD4 / SEG38 PD3 / SEG39 PD2 / SEG40 PD1 / SEG41 PD0 / SEG42 VPP P50 / LED0 / SBO0B / TXD0B P51 / LED1 / SBI0B / RXD0B P52 / LED2 / SBT0B P10 / TM0IO / RMOUT P11 / TM1IO P12 / TM2IO P13 / TM3IO P14 P15 / TM7IO P16 51 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96 97 98 99 100 50 49 48 47 46 45 44 43 42 41 MN101C88D MN101C88F MN101C88G 40 39 38 37 36 35 34 33 32 31 30 29 28 27 26 DGT4 / SEG3 / P74 DGT5 / SEG2 / P75 DGT6 / SEG1 / P76 DGT7 / SEG0 / P77 DGT8 / P40 DGT9 / P41 DGT10 / P60 DGT11 / P61 DGT12 / P62 DGT13 / P63 DGT14 / P64 DGT15 / P65 DGT16 / P66 DGT17 / P67 VDD3 VDD2 P34 P33 SCL / SBT2 / P32 SBI2 / P31 SDA / SBO2 / P30 IRQ4 / P24 IRQ3 / P23 IRQ2 / P22 ACZ / IRQ1 / P21 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 Support Tool In-circuit Emulator Flash Memory Built-in Type PX-ICE101C / D + PX-PRB101C88-LQFP100-P-1818B-M Type ROM (x 8-bit) RAM (x 8-bit) Minimum instruction execution time MN101CF88G 128 K 10 K 0.1 s (at 4.5 V to 5.5 V, 20 MHz) 0.24 s (at 2.7 V to 5.5 V, 8.4 MHz) 0.48 s (at 2.5 V to 5.5 V, 4.19 MHz) 62.5 s (at 2.5 V to 5.5 V, 32 kHz) Package QFP100-P-1818B *Lead-free TXD0A / SBO0A / P00 RXD0A / SBI0A / P01 SBT0A / P02 TXD1 / SBO1 / P03 RXD1 / SBI1 / P04 SBT1 / P05 BUZZER / P06 RST / P27 VDD1 OSC2 OSC1 VSS XI XO MMOD AN0 / PA0 AN1 / PA1 AN2 / PA2 AN3 / PA3 AN4 / PA4 AN5 / PA5 AN6 / PA6 AN7 / PA7 VREF+ IRQ0 / P20 QFP100-P-1818B *Lead-free 25 1 2 3 4 5 6 7 8 9 MAD00051CEM 122 www..com MN101C88D, MN101C88F, MN101C88G MAD00051CEM 123 www..com MN101C38A , MN101C38C Type ROM (x 8-bit) x External memory can be expanded MN101C38A 32 K MN101C38C 48 K RAM (x 8-bit) x External memory can be expanded 1.5 K 2K Package Minimum Instruction Execution Time QFP100-P-1818B *Lead-free, LQFP100-P-1414 *Lead-free 0.1 s (at 4.5 V to 5.5 V, 20 MHz) 0.25 s (at 2.7 V to 5.5 V, 8 MHz) 125 s (at 2.0 V to 5.5 V, 32 kHz)* * The lower limit for operation guarantee for EPROM built-in type is 2.3 V. * RESET * Watchdog * External 0 * External 1 * External 2 * External 3 * External 4 * Timer 2 * Timer 3 * Timer 4 * Timer 5 * Time base * Serial 0 * Serial 1 * A/D conversion finish Timer counter 2 : 8-bit x 1 (square-wave/8-bit PWM output, event count, synchronous output event) Clock source ********************* 1/1, 1/4 of system clock frequency; 1/1 of XI oscillation clock frequency; external clock input Interrupt source **************** coincidence with compare register 2 Timer counter 3 : 8-bit x 1 (square-wave output, event count, generation of remote control carrier, serial 0 baud rate timer) Clock source ********************* 1/4, 1/16 of system clock frequency; 1/1 of OSC oscillation clock frequency; external clock input Interrupt source **************** coincidence with compare register 3 Timer counter 2, 3 can be cascade-connected. Timer counter 4 : 16-bit x 1 (square-wave/16-bit PWM output, event count, synchronous output event, input capture) Clock source ********************* 1/4, 1/16 of system clock frequency; 1/1 of OSC oscillation clock frequency; external clock input Interrupt source **************** coincidence with compare register 4 Time base timer (one-minute count setting, independently operable 8-bit timer counter 5) Clock source ********************* 1/4 of system clock frequency; 1/1, 1/8192 of OSC oscillation clock frequency; 1/1, 1/8192 of XI oscillation clock frequency Interrupt source **************** coincidence with compare register 5; 1/8192 prescaler overflow Watchdog timer Interrupt source **************** 1/65536, 1/262144, 1/1048576 of system clock frequency (mask option) Interrupts Timer Counter Serial Interface Serial 0 : synchronous type/simple UART (half-duplex) x 1 Clock source ********************* 1/2, 1/4, 1/16 of system clock frequency; 1/2 of timer counter 3 frequency Serial 1 : synchronous type x 1 Clock source ********************* 1/2, 1/8, 1/64 of system clock frequency; 1/2 of timer counter 3 frequency I/O Pins I/O Input 44 13 * Common use * Specified pull-up resistor available * Input/output selectable (bit unit) * Specified pull-down resistor partially selectable * Common use * Specified pull-up resistor available * Specified pull-down resistor partially selectable A/D Inputs LCD Special Ports 10-bit x 8-ch. (with S/H) 52 segments x 4 commons (Static, 1/2, 1/3, or 1/4 duty) Buzzer output, remote control carrier signal output, high-current drive port MAD00018DEM 124 www..com MN101C38A , MN101C38C Electrical Characteristics Supply current Limit Parameter Symbol IDD1 Operating supply current IDD2 IDD3 Supply current at HALT IDD4 Supply current at STOP IDD5 fx = 32 kHz, VDD = 3 V fx = 32 kHz, VDD = 3 V, Ta = 25C fx = 32 kHz, VDD = 3 V, Ta = -40C to +85C VDD = 5 V, Ta = 25C VDD = 5 V, Ta = -40C to +85C 30 100 8 24 1 20 Condition min fosc = 8 MHz, VDD = 5 V typ 10 max 25 mA A A A A A Unit Pin Assignment SEG34,P77,A15 SEG35,P76,A14 SEG36,P75,A13 SEG37,P74,A12 SEG38,P73,A11 SEG39,P72,A10 SEG26,P80,D0 SEG27,P81,D1 SEG28,P82,D2 SEG29,P83,D3 SEG30,P84,D4 SEG31,P85,D5 SEG32,P86,D6 SEG33,P87,D7 SEG40,P71,A9 SEG41,P70,A8 SEG42,P67,A7 SEG43,P66,A6 SEG44,P65,A5 SEG45,P64,A4 SEG46,P63,A3 SEG47,P62,A2 53 SEG48,P61,A1 52 75 74 73 72 71 70 69 68 67 66 65 64 63 62 61 60 59 58 57 56 55 54 51 SEG49,P60,A0 SEG25 SEG24 SEG23 SEG22 SEG21 SEG20 SEG19 SEG18 SEG17 SEG16 SEG15 SEG14 SEG13 SEG12 SEG11 SEG10 SEG9 SEG8 SEG7 SEG6 SEG5 SEG4 SEG3 SEG2 SEG1 SEG0 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96 97 98 99 100 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 1 2 3 4 5 6 7 8 9 50 49 48 47 46 45 44 43 42 41 LED4,SEG50,A17,P54 LED3,SEG51,A16,P53 LED2,CS,P52 LED1,RE,P51 LED0,WE,P50 P32 P31 P30 IRQ4,P24 IRQ3,P23 IRQ2,P22 SENS,IRQ1,P21 IRQ0,P20 TM4IO,P14 TM3IO,P13 TM2IO,P12 P11 RMOUT,P10 NRST,P27 NDK,BUZZER,P06 SBT1,P05 SBI1,P04 SBO1,P03 SBT0,P02 RXD,SBI0,P01 MN101C38A MN101C38C 40 39 38 37 36 35 34 33 32 31 30 29 28 27 26 25 OSC2 OSC1 KEY0,AN0,PA0 KEY1,AN1,PA1 KEY2,AN2,PA2 KEY3,AN3,PA3 KEY4,AN4,PA4 KEY5,AN5,PA5 KEY6,AN6,PA6 KEY7,AN7,PA7 COM3 COM2 COM1 COM0 VLC3 VLC2 VLC1 VDD VSS XI MMOD VREF- XO VREF+ QFP100-P-1818B *Lead-free LQFP100-P-1414 *Lead-free Support Tool In-circuit Emulator EPROM Built-in Type PX-ICE101C / D + PX-PRB101C38-QFP100-P-1818B PX-ICE101C / D + PX-PRB101C38-LQFP100-P-1414 Type ROM (x 8-bit) RAM (x 8-bit) Minimum instruction execution time MN101CP38C 48 K 2K 0.1 s (at 4.5 V to 5.5 V, 20 MHz) 0.25 s (at 2.7 V to 5.5 V, 8 MHz) 125 s (at 2.3 V to 5.5 V, 32 kHz) Package MAD00018DEM QFP100-P-1818B *Lead-free, LQFP100-P-1414 *Lead-free TXD,SBO0,P00 125 www..com MN101C39C Type ROM (x 8-bit) x External memory can be expanded MN101C39C 48 K RAM (x 8-bit) x External memory can be expanded 2K Package (Conventional Package) Minimum Instruction Execution Time TQFP080-P-1212D *Lead-free (TQFP080-P-1212C) 0.10 s (at 4.5 V to 5.5 V, 20 MHz) 0.25 s (at 2.7 V to 5.5 V, 8 MHz) 125 s (at 2.0 V to 5.5 V, 32 kHz)* * The lower limit for operation guarantee for EPROM built-in type is 2.3 V. * RESET * Watchdog * External 0 * External 1 * External 2 * External 3 * External 4 * Timer 2 * Timer 3 * Timer 4 * Timer 5 * Time base * Serial 0 * Serial 1 * A/D conversion finish Timer counter 2 : 8-bit x 1 (square-wave/8-bit PWM output, event count, synchronous output event) Clock source ********************* 1/1, 1/4 of system clock frequency; 1/1 of XI oscillation clock frequency; external clock input Interrupt source ***************** coincidence with compare register 2 Timer counter 3 : 8-bit x 1 (square-wave output, event count, generation of remote control carrier, serial 0 baud rate timer) Clock source ********************* 1/4, 1/16 of system clock frequency; 1/1 of OSC oscillation clock frequency; external clock input Interrupt source ***************** coincidence with compare register 3 Timer counter 2, 3 can be cascade-connected. Timer counter 4 : 16-bit x 1 (square-wave/16-bit PWM output, event count, synchronous output event, input capture) Clock source ********************* 1/4, 1/16 of system clock frequency; 1/1 of OSC oscillation clock frequency; external clock input Interrupt source ***************** coincidence with compare register 4 Time base timer (one-minute count setting, independently operable 8-bit timer counter 5) Clock source ********************* 1/4 of system clock frequency; 1/1, 1/8192 of OSC oscillation clock frequency; 1/1, 1/8192 of XI oscillation clock frequency Interrupt source ***************** coincidence with compare register 5; 1/8192 prescaler overflow Watchdog timer Interrupt source ***************** 1/65536, 1/262144, 1/1048576 of system clock frequency (ROM option) Interrupts Timer Counter Serial Interface Serial 0 : synchronous type/simple UART (half-duplex) x 1 Clock source ********************* 1/2, 1/4, 1/16 of system clock frequency; 1/2 of timer counter 3 frequency Serial 1 : synchronous type x 1 Clock source ********************* 1/2, 1/8, 1/64 of system clock frequency; 1/2 of timer counter 3 frequency I/O Pins I/O Input 49 12 * Common use * Specified pull-up resistor available * Input/output selectable (bit unit) * Specified pull-down resistor partially selectable * Common use * Specified pull-up resistor available * Specified pull-down resistor partially selectable A/D Inputs LCD Special Ports 10-bit x 8-ch. (with S/H) 28 segments x 4 commons (Static , 1/2, 1/3, or 1/4 duty) Buzzer output, remote control carrier signal output, high-current drive port MAD00015EEM 126 www..com MN101C39C Electrical Characteristics Supply current Limit Parameter Symbol IDD1 Operating supply current IDD2 IDD3 Supply current at HALT IDD4 Supply current at STOP IDD5 fx = 32 kHz, VDD = 3 V fx = 32 kHz, VDD = 3 V, Ta = 25C fx = 32 kHz, VDD = 3 V, Ta = -40C to +85C VDD = 5 V, Ta = 25C VDD = 5 V, Ta = -40C to +85C 18 3 100 8 25 1 20 Condition min fosc = 8 MHz, VDD = 5 V typ 8 max 25 mA A A A A A Unit Pin Assignment P54,SEG26,LED4,A17 P53,SEG27,LED3,A16 P50,LED0,NWE P51,LED1,NRE P52,LED2,NCS P65,SEG20,A5 P64,SEG21,A4 P63,SEG22,A3 P62,SEG23,A2 P61,SEG24,A1 P60,SEG25,A0 ( ) : Conventional Package P47,KEY7 P46,KEY6 P45,KEY5 P44,KEY4 P43,KEY3 P42,KEY2 P41,KEY1 43 P40,KEY0 42 60 59 58 57 56 55 54 53 52 51 50 49 48 47 46 45 44 P66,SEG19,A6 P67,SEG18,A7 P70,SEG17,A8 P71,SEG16,A9 P72,SEG15,A10 P73,SEG14,A11 P74,SEG13,A12 P75,SEG12,A13 P76,SEG11,A14 P77,SEG10,A15 P87,SEG9,D7 P86,SEG8,D6 P85,SEG7,D5 P84,SEG6,D4 P83,SEG5,D3 P82,SEG4,D2 P81,SEG3,D1 P80,SEG2,D0 SEG1 SEG0 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 10 11 12 13 14 15 16 17 18 19 1 2 3 4 5 6 7 8 9 41 P23,IRQ3 40 39 38 37 36 35 34 33 32 IRQ2,P22 SENS,IRQ1,P21 IRQ0,P20 TM4IO,P14 TM3IO,P13 TM2IO,P12 P11 RMOUT,P10 NRST,P27 NDK,BUZZER,P06 SBT1,P05 SBI1,P04 SBO1,P03 SBT0,P02 RXD, SBI0, P01 TXD, SBO0, P00 VREF+ AN7,PA7 AN6,PA6 AN5,PA5 MN101C39C 31 30 29 28 27 26 25 24 23 22 21 20 AN0,PA0 AN1,PA1 AN2,PA2 AN3,PA3 TQFP080-P-1212D *Lead-free (TQFP080-P-1212C) Support Tool In-circuit Emulator EPROM Built-in Type PX-ICE101C / D + PX-PRB101C39-TQFP080-P-1212 Type ROM (x 8-bit) RAM (x 8-bit) Minimum instruction execution time MN101CP39C 48 K 2K 0.10 s (at 4.5 V to 5.5 V, 20 MHz) 0.25 s (at 2.7 V to 5.5 V, 8 MHz) 125 s (at 2.3 V to 5.5 V, 32 kHz)* Package (Conventional Package) MAD00015EEM TQFP080-P-1212D *Lead-free (TQFP080-P-1212C) AN4,PA4 MMOD VREF- OSC2 COM3 COM2 COM1 COM0 VLC3 VLC2 VLC1 OSC1 VDD VSS XI XO 127 www..com MN101C485 , MN101C487 Type ROM (x 8-bit) x External memory can be expanded MN101C485 8K MN101C487 16 K RAM (x 8-bit) x External memory can be expanded 0.5 K 0.5 K Package Minimum Instruction Execution Time LQFP064-P-1414 *Lead-free, TQFP064-P-1010B *Lead-free 0.10 s (at 4.5 V to 5.5 V, 20 MHz) 0.25 s (at 2.7 V to 5.5 V, 8 MHz) 125 s (at 2.0 V to 5.5 V, 32 kHz)* * The lower limit for operation guarantee for EPROM built-in type is 2.3 V. * RESET * Watchdog * External 0 * External 1 * External 2 * External 4 * Timer 2 * Timer 3 * Timer 4 * Timer 5 * Time base * Serial 0 * A/D conversion finish Timer counter 2 : 8-bit x 1 (square-wave/8-bit PWM output, event count, synchronous output event) Clock source ********************* 1/1, 1/4 of system clock frequency; 1/1 of XI oscillation clock frequency; external clock input Interrupt source **************** coincidence with compare register 2 Timer counter 3 : 8-bit x 1 (square-wave output, event count, generation of remote control carrier, serial 0 baud rate timer) Clock source ********************* 1/4, 1/16 of system clock frequency; 1/1 of OSC oscillation clock frequency; external clock input Interrupt source **************** coincidence with compare register 3 Timer counter 2, 3 can be cascade-connected. Timer counter 4 : 16-bit x 1 (square-wave/16-bit PWM output, event count, synchronous output event, input capture) Clock source ********************* 1/4, 1/16 of system clock frequency; 1/1 of OSC oscillation clock frequency; external clock input Interrupt source **************** coincidence with compare register 4 Time base timer (one-minute count setting, independently operable 8-bit timer counter 5) Clock source ********************* 1/4 of system clock frequency; 1/1, 1/8192 of OSC oscillation clock frequency; 1/1, 1/8192 of XI oscillation clock frequency Interrupt source **************** coincidence with compare register 5; 1/8192 prescaler overflow Watchdog timer Interrupt source **************** 1/65536, 1/262144, 1/1048576 of system clock frequency (ROM option) Interrupts Timer Counter Serial Interface I/O Pins I/O Input A/D Inputs LCD Special Ports Serial 0 : synchronous type/simple UART (half-duplex) x 1 Clock source ********************* 1/2, 1/4, 1/16 of system clock frequency; 1/2 of timer counter 3 frequency 36 11 * Common use * Specified pull-up resistor available * Input/output selectable (bit unit) * Specified pull-down resistor partially selectable * Common use * Specified pull-up resistor available * Specified pull-down resistor partially selectable 10-bit x 8-ch. (with S/H) 25 segments x 4 commons (Static, 1/2, 1/3, or 1/4 duty) Buzzer output, remote control carrier signal output, high-current drive port MAD00012DEM 128 www..com MN101C485 , MN101C487 Electrical Characteristics Supply current Limit Parameter Symbol IDD1 Operating supply current IDD2 IDD3 Supply current at HALT IDD4 Supply current at STOP IDD5 fx = 32 kHz, VDD = 3 V fx = 32 kHz, VDD = 3 V, Ta = 25C fx = 32 kHz, VDD = 3 V, Ta = -40C to +85C VDD = 5 V, Ta = 25C VDD = 5 V, Ta = -40C to +85C 15 4 100 8 30 1 25 Condition min fosc = 8 MHz, VDD = 5 V typ 10 max 25 mA A A A A A Unit 48 47 46 45 44 43 42 41 40 39 38 37 36 35 34 33 SEG16,P67,A7 SEG17,P66,A6 SEG18,P65,A5 SEG19,P64,A4 SEG20,P63,A3 SEG21,P62,A2 SEG22,P61,A1 SEG23,P60,A0 SEG24,P53,LED3,A16 P52,CS,LED2 P51,RE,LED1 P50,WE,LED1 P22,IRQ2 P21,IRQ1,SENS P20,IRQ0 P14,TM4IO Pin Assignment A8,P70,SEG15 A9,P71,SEG14 A10,P72,SEG13 A11,P73,SEG12 A12,P74,SEG11 A13,P75,SEG10 A14,P76,SEG9 A15,P77,SEG8 D7,P87,SEG7 D6,P86,SEG6 D5,P85,SEG5 D4,P84,SEG4 D3,P83,SEG3 D2,P82,SEG2 D1,P81,SEG1 D0,P80,SEG0 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 MN101C485 MN101C487 32 31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 P13,TM3IO P12,TM2IO P10,RMOUT P27,NRST P06,BUZZER,DK P02,SBT0 P01,SBI0,RXD P00,SBO0,TXD VREF+ PA7,AN7,KEY7 PA6,AN6,KEY6 PA5,AN5,KEY5 PA4,AN4,KEY4 PA3,AN3,KEY3 PA2,AN2,KEY2 PA1,AN1,KEY1 Support Tool In-circuit Emulator EPROM Built-in Type PX-ICE101C / D + PX-PRB101C48-TQFP064-P-1010B PX-ICE101C / D + PX-PRB101C48-LQFP064-P-1414 Type ROM (x 8-bit) RAM (x 8-bit) Minimum instruction execution time MN101CP487 16 K 0.5 K 0.10 s (at 4.5 V to 5.5 V, 20 MHz) 0.25 s (at 2.7 V to 5.5 V, 8 MHz) 125 s (at 2.3 V to 5.5 V, 32 KHz) Package MAD00012DEM COM3 COM2 COM1 COM0 VLC3 VLC2 VLC1 VDD OSC2 OSC1 VSS XI XO MMOD VREFKEY0,AN0,PA0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 LQFP064-P-1414 *Lead-free TQFP064-P-1010B *Lead-free LQFP064-P-1414 *Lead-free, TQFP064-P-1010B *Lead-free 129 www..com MN101C54A, MN101C54C Type ROM (x 8-bit) x RAM (x 8-bit) x Package Minimum Instruction Execution Time MN101C54A 32 K 2K QFP084-P-1818E *Lead-free, LQFP080-P-1414A *Lead-free 0.1 s (at 4.5 V to 5.5 V, 20 MHz) 0.25 s (at 2.7 V to 5.5 V, 8 MHz)* 1 62.5 s (at 2.0 V to 5.5 V, 32 kHz)* 1,2 1 The lower limit for operation guarantee for flash memory built-in type is 4.5 V. * *2 The lower limit for operation guarantee for EPROM built-in type is 2.3 V. * RESET * Watchdog * External 0 * External 1 * External 2 * External 3* 1 * External 4 (key interrupt dedicated) * Timer 0 * Timer 1 * Timer 2 * Timer 3 * Timer 6 * Time base * Timer 7 (2 systems) * Timer 8 (2 systems) * Serial 0 (2 systems) * Serial 2 * A/D conversion finish *1 LQFP080-P-1414A: Not mounted Timer counter 0 : 8-bit x 1 (square-wave/8-bit PWM output, event count, generation of remote control carrier, simple pulse width measurement) (square-wave/PWM output to large current terminal P50 possible) Clock source ********************* 1/2, 1/4 of system clock frequency; 1/1, 1/4, 1/16, 1/32, 1/64 of OSC oscillation clock frequency; 1/1 of XI oscillation clock frequency; external clock input Interrupt source ***************** coincidence with compare register 0 Timer counter 1 : 8-bit x 1 (square-wave output, event count, synchronous output event) Clock source ********************* 1/2, 1/8 of system clock frequency; 1/1, 1/4, 1/16, 1/8192, 1/32768 of OSC oscillation clock frequency; 1/1 of XI oscillation clock frequency; external clock input Interrupt source ***************** coincidence with compare register 1 Timer counter 0, 1 can be cascade-connected. Timer counter 2 : 8-bit x 1 (square-wave output, additional pulse type 10-bit PWM output, event count, synchronous output event, simple pulse width measurement) (square-wave/PWM output to large current terminal P52 possible) Clock source ********************* 1/2, 1/4 of system clock frequency; 1/1, 1/4, 1/16, 1/32, 1/64 of OSC oscillation clock frequency; 1/1 of XI oscillation clock frequency; external clock input Interrupt source ***************** coincidence with compare register 2 Timer counter 3 : 8-bit x 1 (square-wave output, event count, generation of remote control carrier, serial 0 baud rate timer) Clock source ********************* 1/2, 1/8 of system clock frequency; 1/1, 1/4, 1/16, 1/64, 1/128 of OSC oscillation clock frequency; 1/1 of XI oscillation clock frequency; external clock input Interrupt source ***************** coincidence with compare register 3 Timer counter 2, 3 can be cascade-connected. Timer counter 6 : 8-bit freerun timer Clock source ********************* 1/1 of system clock frequency; 1/1, 1/4096, 1/8192 of OSC oscillation clock frequency; 1/1, 1/4096, 1/8192 of XI oscillation clock frequency Interrupt source ***************** coincidence with compare register 6 Timer counter 7 : 16-bit x 1 (square-wave output, IGBT/16-bit PWM output (cycle / duty continuous variable), event count, synchronous output evevt, pulse width measurement, input capture) (square-wave/PWM output to large current terminal P51 possible) Clock source ********************* 1/1, 1/2, 1/4, 1/16 of system clock frequency; 1/1, 1/2, 1/4, 1/16 of OSC oscillation clock frequency; 1/1, 1/2, 1/4, 1/16 of external clock input frequency Interrupt source ***************** coincidence with compare register 7 (2 lines) MN101C54C 48 K 2K Interrupts Timer Counter MAD00016GEM 130 www..com MN101C54A, MN101C54C Timer Counter (Continue) Timer counter 8: 16 bit x 1 (square-wave/16-bit PWM output [duty continuous variable], event count, pulse width measurement, input capture) (square-wave/PWM output to large current terminal P53 possible) Clock source ********************* 1/1, 1/2, 1/4, 1/16, 1/128 of system clock frequency; 1/1, 1/2, 1/4, 1/16, 1/128 of OSC oscillation clock frequency; 1/1, 1/2, 1/4, 1/16 of external clock input frequency Interrupt source ***************** coincidence with compare register 8 (2 lines) Timer counters 7, 8 can be cascade-connected. (square-wave output, PWM, input capture, pulse width measurement is possible as a 32-bit timer.) Time base timer (one-minute count setting) Clock source ********************* 1/1 of OSC oscillation clock frequency; 1/1 of XI oscillation clock frequency Interrupt source ***************** 1/128, 1/256, 1/512, 1/1024, 1/8192, 1/32768, of clock source frequency Watchdog timer Interrupt source ***************** 1/65536, 1/262144, 1/1048576 of system clock frequency Serial Interface Serial 0 : synchronous type/UART (full-duplex) x 1 Clock source ********************* 1/2, 1/4 of system clock frequency; pulse output of timer counter 3; 1/2, 1/4, 1/16, 1/64 of OSC oscillation clock frequency Serial 2 : synchronous type x 1 Clock source ********************* 1/2, 1/4 of system clock frequency; pulse output of timer counter 3; 1/2, 1/4, 1/16, 1/32 of OSC oscillation clock frequency I/O Pins I/O Input 61 (60) 4 (3) * Common use * Specified pull-up resistor available * Input/output selectable (bit unit) ( ): LQFP080-P-1414A * Common use * Specified pull-up resistor available ( ): LQFP080-P-1414A A/D Inputs LCD 10-bit x 8-ch. (with S/H) 32 segments x 4 commons (static, 1/2, 1/3, or 1/4 duty) LCD power supply separated from VDD (usable if VDD VLCD 5.5 V) LCD power step-up circuit contained (3/2, 2 and 3 times) LCD power shunt resistance contained Buzzer output, remote control carrier signal output, high-current drive port Special Ports Electrical Characteristics Supply current Limit Parameter Symbol IDD1 Operating supply current IDD2 IDD3 IDD4 Supply current at HALT IDD5 IDD6 Supply current at STOP IDD7 Condition min fosc = 20 MHz, VDD = 5 V fosc = 8 MHz, VDD = 5 V fx = 32 kHz, VDD = 3 V fx = 32 kHz, VDD = 3 V, Ta = 25C fx = 32 kHz, VDD = 3 V, Ta = -40C to +85C VDD = 5 V, Ta = 25C VDD = 5 V, Ta = -40C to +85C typ 25 10 30 4 max 60 25 100 8 30 2 50 mA mA A A A A A Unit See the next page for pin assignment and support tool. MAD00016GEM 131 www..com Pin Assignment P47/KEY7/SEG24/SDO7 P46/KEY6/SEG25/SDO6 P45/KEY5/SEG26/SDO5 P44/KEY4/SEG27/SDO4 P43/KEY3/SEG28/SDO3 P42/KEY2/SEG29/SDO2 P41/KEY1/SEG30/SDO1 P47/KEY7/SEG24/SDO7 P46/KEY6/SEG25/SDO6 P45/KEY5/SEG26/SDO5 P44/KEY4/SEG27/SDO4 P43/KEY3/SEG28/SDO3 P42/KEY2/SEG29/SDO2 P41/KEY1/SEG30/SDO1 P40/KEY0/SEG31/SDO0 P40/KEY0/SEG31/SDO0 P21/IRQ1/ACZ P21/IRQ1/ACZ 44 P67/SEG16 P66/SEG17 P65/SEG18 P64/SEG19 P63/SEG20 P62/SEG21 P61/SEG22 P67/SEG16 P66/SEG17 P65/SEG18 P64/SEG19 P63/SEG20 P62/SEG21 P61/SEG22 P60/SEG23 P60/SEG23 P23/IRQ3 P22/IRQ2 45 P22/IRQ2 P20/IRQ0 VDD 63 62 61 60 59 58 57 56 55 54 53 52 51 50 49 48 47 46 60 59 58 57 56 55 54 53 52 51 50 49 48 47 46 45 44 43 42 41 P70/SEG15 P71/SEG14 P72/SEG13 P73/SEG12 P74/SEG11 P75/SEG10 P76/SEG9 P77/SEG8 P80/SEG7 P81/SEG6 P82/SEG5 P83/SEG4 P84/SEG3 P85/SEG2 P86/SEG1 P87/SEG0 COM0/P30 COM1/P31 COM2/P32 COM3/P33 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 10 11 12 13 14 15 16 17 18 19 20 40 39 38 37 36 35 34 33 TM8IO/P15 TM7IO/P14 TM3IO/P13 TM2IO/P12 TM1IO/P11 RMOUT/TM0IO/P10 BUZZER/P06 SBT2/P05 SBI2/P04 SBO2/P03 SBT0/P02 RXD/SBI0/P01 TXD/SBO0/P00 VDD VREFAN7/PA7 AN6/PA6 AN5/PA5 AN4/PA4 AN3/PA3 P70/SEG15 P71/SEG14 P72/SEG13 P73/SEG12 P74/SEG11 P75/SEG10 P76/SEG9 P77/SEG8 P80/SEG7 P81/SEG6 P82/SEG5 P83/SEG4 P84/SEG3 P85/SEG2 P86/SEG1 P87/SEG0 NC COM0/P30 COM1/P31 COM2/P32 COM3/P33 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 10 11 12 13 14 15 16 17 18 19 20 1 2 3 4 5 6 7 8 9 43 P20/IRQ0 VDD 42 41 40 39 38 37 36 35 34 TM8IO/P15 TM7IO/P14 TM3IO/P13 TM2IO/P12 TM1IO/P11 RMOUT/TM0IO/P10 BUZZER/P06 SBT2/P05 SBI2/P04 SBO2/P03 SBT0/P02 RXD/SBI0/P01 TXD/SBO0/P00 VDD VREFAN7/PA7 AN6/PA6 AN5/PA5 AN4/PA4 AN3/PA3 AN2/PA2 MN101C54A MN101C54C 32 31 30 29 28 27 26 25 24 23 22 21 MN101C54A MN101C54C 33 32 31 30 29 28 27 26 25 24 23 22 21 1 2 3 4 5 6 7 8 9 NC NC MMOD XI XO VDD TM0O/LED0/P50 TM7O/LED1/P51 TM2O/LED2/P52 TM8O/LED3/P53 NATRST NRST/P27 VREF+ VLC1 VLC2 VLC3 VSS OSC2 OSC1 AN0/PA0 AN0/PA0 AN1/PA1 TM7O/LED1/P51 TM2O/LED2/P52 TM8O/LED3/P53 LQFP080-P-1414A *Lead-free NRST/P27 AN2/PA2 QFP084-P-1818E *Lead-free Support Tool In-circuit Emulator EPROM Built-in Type PX-ICE101C / D + PX-PRB101C54-QFP084-P-1818E-M PX-ICE101C / D + PX-PRB101C54-LQFP080-P-1414A-M Type ROM (x 8-bit) RAM (x 8-bit) Minimum instruction execution time MN101CP54C 48 K 2K 0.1 s (at 4.5 V to 5.5 V, 20 MHz) 0.25 s (at 2.7 V to 5.5 V, 8 MHz) 62.5 s (at 2.3 V to 5.5 V, 32 kHz) Package LQFP080-P-1414A *Lead-free, QFP084-P-1818E *Lead-free MN101CF54D 64 K 2K 0.1 s (at 4.5 V to 5.5 V, 20 MHz) 0.25 s (at 4.5 V to 5.5 V, 8 MHz) 62.5 s (at 4.5 V to 5.5 V, 32 kHz) Package LQFP080-P-1414A *Lead-free [ES (Engineering Sample) available], QFP084-P-1818E *Lead-free Flash Memory Built-in Type Type ROM (x 8-bit) RAM (x 8-bit) Minimum instruction execution time AN1/PA1 XI VLC1 VLC2 VLC3 OSC2 OSC1 XO C1 C2 VDD MMOD VREF+ VSS MAD00016GEM 132 www..com MN101C54A, MN101C54C MAD00016GEM 133 www..com MN101C57C , MN101C57D Type ROM (x 8-bit) x RAM (x 8-bit) x Package Minimum Instruction Execution Time MN101C57C 48 K 2K QFP100-P-1818B *Lead-free 0.1 s (at 4.5 V to 5.5 V, 20 MHz) 0.25 s (at 2.7 V to 5.5 V, 8 MHz) 62.5 s (at 2.0 V to 5.5 V, 32 kHz)* * The lower limit for operation guarantee for flash memory built-in type is 2.5 V. * RESET * Watchdog * External 0 * External 1 * External 2 * External 3 * External 4 (key interrupt selectable) * External 5 (key interrupt dedicated) * External 6 * External 7 * Remote control * Timer 0 * Timer 1 * Timer 2 * Timer 3 * Timer 6 * Time base * Timer 7 (2 systems) * Timer 8 (2 systems) * Serial 0 (2 systems) * Serial 2 * A/D conversion finish Timer counter 0 : 8-bit x 1 (square-wave/8-bit PWM output, event count, generation of remote control carrier, simple pulse width measurement) (square-wave/PWM output to large current terminal P50 possible) Clock source ********************* 1/2, 1/4 of system clock frequency; 1/1, 1/4, 1/16, 1/32, 1/64 of OSC oscillation clock frequency; 1/1 of XI oscillation clock frequency; external clock input Interrupt source ***************** coincidence with compare register 0 Timer counter 1 : 8-bit x 1 (square-wave output, event count, synchronous output event) Clock source ********************* 1/2, 1/8 of system clock frequency; 1/1, 1/4, 1/16, 1/8192, 1/32768 of OSC oscillation clock frequency; 1/1 of XI oscillation clock frequency; external clock input Interrupt source ***************** coincidence with compare register 1 Timer counter 0, 1 can be cascade-connected. Timer counter 2 : 8-bit x 1 (square-wave output, additional pulse type 10-bit PWM output, event count, synchronous output event, simple pulse width measurement) (square-wave/PWM output to large current terminal P52 possible) Clock source ********************* 1/2, 1/4 of system clock frequency; 1/1, 1/4, 1/16, 1/32, 1/64 of OSC oscillation clock frequency; 1/1 of XI oscillation clock frequency; external clock input Interrupt source ***************** coincidence with compare register 2 Timer counter 3 : 8-bit x 1 (square-wave output, event count, generation of remote control carrier, serial 0 baud rate timer) Clock source ********************* 1/2, 1/8 of system clock frequency; 1/1, 1/4, 1/16, 1/64, 1/128 of OSC oscillation clock frequency; 1/1 of XI oscillation clock frequency; external clock input Interrupt source ***************** coincidence with compare register 3 Timer counter 2, 3 can be cascade-connected. Timer counter 6 : 8-bit freerun timer Clock source ********************* 1/1 of system clock frequency; 1/1, 1/4096, 1/8192 of OSC oscillation clock frequency; 1/1, 1/4096, 1/8192 of XI oscillation clock frequency Interrupt source ***************** coincidence with compare register 6 Timer counter 7 : 16-bit x 1 (square-wave output, IGBT/16-bit PWM output (cycle / duty continuous variable), event count, synchronous output evevt, pulse width measurement, input capture) (square-wave/PWM output to large current terminal P51 possible) Clock source ********************* 1/1, 1/2, 1/4, 1/16 of system clock frequency; 1/1, 1/2, 1/4, 1/16 of OSC oscillation clock frequency; 1/1, 1/2, 1/4, 1/16 of external clock input frequency Interrupt source ***************** coincidence with compare register 7 (2 lines) MN101C57D 64 K 2K Interrupts Timer Counter MAD00019GEM 134 www..com MN101C57C , MN101C57D Timer Counter (Continue) Timer counter 8: 16 bit x 1 (square-wave/16-bit PWM output [duty continuous variable], event count, pulse width measurement, input capture) (square-wave/PWM output to large current terminal P53 possible) Clock source ********************* 1/1, 1/2, 1/4, 1/16, 1/128 of system clock frequency; 1/1, 1/2, 1/4, 1/16, 1/128 of OSC oscillation clock frequency; 1/1, 1/2, 1/4, 1/16 of external clock input frequency Interrupt source ***************** coincidence with compare register 8 (2 lines) Timer counters 7, 8 can be cascade-connected. (square-wave output, PWM, input capture, pulse width measurement is possible as a 32-bit timer.) Time base timer (one-minute count setting) Clock source ********************* 1/1 of OSC oscillation clock frequency; 1/1 of XI oscillation clock frequency Interrupt source ***************** 1/128, 1/256, 1/512, 1/1024, 1/8192, 1/32768 of clock source frequency Watchdog timer Interrupt source ***************** 1/65536, 1/262144, 1/1048576 of system clock frequency Serial Interface Serial 0 : synchronous type/UART (full-duplex) x 1 Clock source ********************* 1/2, 1/4 of system clock frequency; 1/2 of pulse output of timer counter 3 frequency ; 1/2, 1/4, 1/16, 1/64 of OSC oscillation clock frequency Serial 2 : synchronous type x 1 Clock source ********************* 1/2, 1/4 of system clock frequency; 1/2 of pulse output of timer counter 3 frequency; 1/2, 1/4, 1/16, 1/32 of OSC oscillation clock frequency Remote Control Interface Remote control output: timer 0 and 3 output: the remote control carrier output of 1/2 and 1/3 duty. Remote control reception: correspondence with low speed clock waiting Correspondence with AEHA (Association for Electric Home Appliances) format (selection of a formart is available by the set-up) 77 6 * Common use * Specified pull-up resistor available * Input/output selectable (bit unit) * Common use * Specified pull-up resistor available I/O Pins A/D Inputs LCD I/O Input 10-bit x 16-ch. (with S/H) 47 segments x 4 commons (static, 1/2, 1/3, or 1/4 duty) LCD power supply separated from VDD (usable if VLCD VDD) LCD power shunt resistance contained Buzzer output, remote control carrier signal output, high-current drive port Special Ports Electrical Characteristics Supply current Limit Parameter Symbol IDD1 Operating supply current IDD2 IDD3 IDD4 Supply current at HALT IDD5 IDD6 Supply current at STOP IDD7 Condition min fosc = 20 MHz, VDD = 5 V fosc = 8 MHz, VDD = 5 V fx = 32 kHz, VDD = 3 V fx = 32 kHz, VDD = 3 V, Ta = 25C fx = 32 kHz, VDD = 3 V, Ta = -40C to +85C VDD = 5 V, Ta = 25C VDD = 5 V, Ta = -40C to +85C typ 15 8 30 4 max 30 16 60(70) 8 30 2 50 mA mA A A A A A Unit ( ) : Flash memory built-in type. See the next page for pin assignment and support tool. MAD00019GEM 135 www..com Pin Assignment PB5/SEG41/AN13/SBO0B/TXDB PB6/SEG40/AN14/SBI0B/RXDB PB7/SEG39/AN15/SBT0B P47/SEG26/KEY7/SDO7 P46/SEG27/KEY6/SDO6 P45/SEG28/KEY5/SDO5 P44/SEG29/KEY4/SDO4 P43/SEG30/KEY3/SDO3 P42/SEG31/KEY2/SDO2 P41/SEG32/KEY1/SDO1 P40/SEG33/KEY0/SDO0 PB4/SEG42/AN12 PB3/SEG43/AN11 53 PB2/SEG44/AN10 52 P31/SEG37/IRQ7 P30/SEG38/IRQ6 75 73 74 P65/SEG20/A5 P66/SEG19/A6 P67/SEG18/A7 P70/SEG17/A8 P71/SEG16/A9 P72/SEG15/A10 P73/SEG14/A11 P74/SEG13/A12 P75/SEG12/A13 P76/SEG11/A14 P77/SEG10/A15 P35/SEG9/A16 P36/SEG8/A17 P87/SEG7/D7 P86/SEG6/D6 P85/SEG5/D5 P84/SEG4/D4 P83/SEG3/D3 P82/SEG2/D2 P81/SEG1/D1 P80/SEG0/D0 P90/COM0 P91/COM1 P92/COM2 P93/COM3 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96 97 98 99 100 1 72 71 70 69 68 67 66 65 64 63 62 61 60 59 58 57 56 55 54 51 50 49 48 47 46 45 44 43 42 41 40 PB1/SEG45/AN9 P64/SEG21/A4 P63/SEG22/A3 P62/SEG23/A2 P61/SEG24/A1 P60/SEG25/A0 P34/SEG34 P33/SEG35 P32/SEG36 PB0/SEG46/AN8 VREFPA7/AN7 PA6/AN6 PA5/AN5 PA4/AN4 PA3/AN3 PA2/AN2 PA1/AN1 PA0/AN0 VREF+ VDD P25/RMIRQ P24/IRQ4 P23/IRQ3 P22/IRQ2 P21/IRQ1/ACZ P20/IRQ0 P15/TM8IO P14/TM7IO P13/TM3IO P12/TM2IO P11/TM1IO P10/RMOUT/TM0IO P06/NDK/BUZZER MN101C57C MN101C57D 39 38 37 36 35 34 33 32 31 30 29 28 27 2 4 3 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 26 25 XO C1 C2 XI VDD VLC1 OSC1 OSC2 LED4/P54 MMOD VLCIN2/VLC2 VLCIN3/VLC3 TM8O/LED3/P53 NRST/P27 VDD VSS KEY13/SBO2/PO3 KEY14/SBI2/PO4 NWE/TM0O/LED0/P50 NRE/TM7O/LED1/P51 NCS/TM2O/LED2/P52 KEY10/TXDA/SBO0A/PO0 QFP100-P-1818B *Lead-free Support Tool In-circuit Emulator Flash Memory Built-in Type PX-ICE101C / D + PX-PRB101C57-QFP100-P-1818B-M Type ROM (x 8-bit) RAM (x 8-bit) Minimum instruction execution time MN101CF57D 64 K 2K 0.1 s (at 4.5 V to 5.5 V, 20 MHz) 0.25 s (at 2.7 V to 5.5 V, 8 MHz) 62.5 s (at 2.5 V to 5.5 V, 32 kHz) Package QFP100-P-1818B *Lead-free KEY11/RXDA/SBI0A/PO1 KEY12/SBT0A/PO2 KEY15/SBT2/PO5 MAD00019GEM 136 www..com MN101C57C , MN101C57D MAD00019GEM 137 www..com MN101C589 , MN101C58A Type ROM (x 8-bit) x RAM (x 8-bit) x Package Minimum Instruction Execution Time MN101C589 24 K 1.5 K LQFP064-P-1414 *Lead-free MN101C58A 32 K 1.5 K Interrupts 0.1 s (at 4.5 V to 5.5 V, 20 MHz) 0.25 s (at 2.7 V to 5.5 V, 8 MHz)* 1 62.5 s (at 2.0 V to 5.5 V, 32 kHz)* 1,2 *1 The lower limit for operation guarantee for flash memory built-in type is 4.5 V. *2 The lower limit for operation guarantee for EPROM built-in type is 2.3 V. * RESET * Watchdog * External 0 * External 1 * External 2 * External 4 (key interrupt dedicated) * Timer 0 * Timer 1 * Timer 2 * Timer 3 * Timer 6 * Time base * Timer 7 (2 systems) * Timer 8 (2 systems) * Serial 0 (2 systems) * A/D conversion finish Timer counter 0 : 8-bit x 1 (square-wave/8-bit PWM output, event count, generation of remote control carrier, simple pulse width measurement) (square-wave/PWM output to large current terminal P50 possible) Clock source ********************* 1/2, 1/4 of system clock frequency; 1/1, 1/4, 1/16, 1/32, 1/64 of OSC oscillation clock frequency; 1/1 of XI oscillation clock frequency; external clock input Interrupt source ***************** coincidence with compare register 0 Timer counter 1 : 8-bit x 1 (square-wave output, event count, synchronous output event) Clock source ********************* 1/2, 1/8 of system clock frequency; 1/1, 1/4, 1/16, 1/8192, 1/32768 of OSC oscillation clock frequency; 1/1 of XI oscillation clock frequency; external clock input Interrupt source ***************** coincidence with compare register 1 Timer counter 0, 1 can be cascade-connected. Timer counter 2 : 8-bit x 1 (square-wave output, additional pulse type 10-bit PWM output, event count, synchronous output event, simple pulse width measurement) (square-wave/PWM output to large current terminal P52 possible) Clock source ********************* 1/2, 1/4 of system clock frequency; 1/1, 1/4, 1/16, 1/32, 1/64 of OSC oscillation clock frequency; 1/1 of XI oscillation clock frequency; external clock input Interrupt source ***************** coincidence with compare register 2 Timer counter 3 : 8-bit x 1 (square-wave output, event count, generation of remote control carrier, serial 0 baud rate timer) Clock source ********************* 1/2, 1/8 of system clock frequency; 1/1, 1/4, 1/16, 1/64, 1/128 of OSC oscillation clock frequency; 1/1 of XI oscillation clock frequency; external clock input Interrupt source ***************** coincidence with compare register 3 Timer counter 2, 3 can be cascade-connected. Timer counter 6 : 8-bit freerun timer Clock source ********************* 1/1 of system clock frequency; 1/1, 1/4096, 1/8192 of OSC oscillation clock frequency; 1/1, 1/4096, 1/8192 of XI oscillation clock frequency Interrupt source ***************** coincidence with compare register 6 Timer counter 7 : 16-bit x 1 (square-wave output, IGBT/16-bit PWM output (cycle / duty continuous variable), event count, synchronous output evevt, pulse width measurement, input capture) (square-wave/PWM output to large current terminal P51 possible) Clock source ********************* 1/1, 1/2, 1/4, 1/16 of system clock frequency; 1/1, 1/2, 1/4, 1/16 of OSC oscillation clock frequency; 1/1, 1/2, 1/4, 1/16 of external clock input frequency Interrupt source ***************** coincidence with compare register 7 (2 lines) Timer counter 8: 16 bit x 1 (square-wave/16-bit PWM output [duty continuous variable], event count, pulse width measurement, input capture) (square-wave/PWM output to large current terminal P53 possible) Timer Counter MAD00014EEM 138 www..com MN101C589 , MN101C58A Timer Counter (Continue) Clock source ********************* 1/1, 1/2, 1/4, 1/16, 1/128 of system clock frequency; 1/1, 1/2, 1/4, 1/16, 1/128 of OSC oscillation clock frequency; 1/1, 1/2, 1/4, 1/16 of external clock input frequency Interrupt source ***************** coincidence with compare register 8 (2 lines) Timer counters 7, 8 can be cascade-connected. (square-wave output, PWM, input capture, pulse width measurement is possible as a 32-bit timer.) Time base timer (one-minute count setting) Clock source ********************* 1/1 of OSC oscillation clock frequency; 1/1 of XI oscillation clock frequency Interrupt source ***************** 1/128, 1/256, 1/512, 1/1024, 1/8192, 1/32768, of clock source frequency Watchdog timer Interrupt source ***************** 1/65536, 1/262144, 1/1048576 of system clock frequency Serial Interface Serial 0 : synchronous type/UART (full-duplex) x 1 Clock source ********************* 1/2, 1/4 of system clock frequency; pulse output of timer counter 3; 1/2, 1/4, 1/16, 1/64 of OSC oscillation clock frequency I/O Pins A/D Inputs LCD I/O Input 46 3 * Common use * Specified pull-up resistor available * Input/output selectable (bit unit) * Common use * Specified pull-up resistor available 10-bit x 8-ch. (with S/H) 24 segments x 4 commons (static, 1/2, 1/3, or 1/4 duty) LCD power supply separated from VDD (usable if VDD VLCD 5.5 V) LCD power step-up circuit contained (3/2, 2 and 3 times) LCD power shunt resistance contained Buzzer output, remote control carrier signal output, high-current drive port Special Ports Electrical Characteristics Supply current Limit Parameter Symbol IDD1 Operating supply current IDD2 IDD3 IDD4 Supply current at HALT IDD5 IDD6 Supply current at STOP IDD7 Condition min fosc = 20 MHz, VDD = 5 V fosc = 8 MHz, VDD = 5 V fx = 32 kHz, VDD = 3 V fx = 32 kHz, VDD = 3 V, Ta = 25C fx = 32 kHz, VDD = 3 V, Ta = -40C to +85C VDD = 5 V, Ta = 25C VDD = 5 V, Ta = -40C to +85C typ 25 10 30 4 max 60 25 100 8 30 2 50 mA mA A A A A A Unit See the next page for pin assignment and support tool. MAD00014EEM 139 www..com SEG23/KEY0/P60/SDO0/SBO0B/TXDB SEG22/KEY1/P61/SDO1/SBI0B/RXDB Pin Assignment SEG21/KEY2/P62/SDO2/SBT0B SEG16/KEY7/P67/SDO7 SEG17/KEY6/P66/SDO6 SEG18/KEY5/P65/SDO5 SEG19/KEY4/P64/SDO4 SEG20/KEY3/P63/SDO3 P21,IRQ1,ACZ1 35 P20,IRQ0,ACZ0 34 48 47 46 45 44 43 42 41 40 39 38 37 36 SEG11,P74 SEG10,P75 SEG9,P76 SEG8,P77 SEG7,P80 SEG6,P81 SEG5,P82 SEG4,P83 SEG3,P84 SEG2,P85 SEG1,P86 SEG0,P87 COM0,P30 COM1,P31 COM2,P32 COM3,P33 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 10 11 12 13 14 15 16 1 2 3 4 5 6 7 8 9 33 P15,TM8IO SEG12,P73 SEG13,P72 SEG14,P71 SEG15,P70 P22,IRQ2 32 31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 TM7IO,P14 TM3IO,P13 TM2IO,P12 TM1IO,P11 RMOUT,TM0IO,P10 AN7/BUZZER/P06 AN6/SBT0A/P02 AN5/RXDA/SBI0A/P01 AN4/TXDA/SBO0A/P00 VDD AN3/PA3 AN2/PA2 AN1/PA1 AN0/PA0 VREF+ NRST,P27 MN101C589 MN101C58A TM2O, LED2,P52 TM0O,LED0,P50 TM7O,LED1,P51 TM8O,LED3,P53 VLC1 OSC2 OSC1 ATRST VLCIN2/VLC2 VLCIN3/VLC3 LQFP064-P-1414 *Lead-free Support Tool In-circuit Emulator EPROM Built-in Type PX-ICE101C / D + PX-PRB101C58-LQFP064-P-1414-M Type ROM (x 8-bit) RAM (x 8-bit) Minimum instruction execution time MN101CP58A 32 K 1.5 K 0.1 s (at 4.5 V to 5.5 V, 20 MHz) 0.25 s (at 2.7 V to 5.5 V, 8 MHz) 62.5 s (at 2.3 V to 5.5 V, 32 kHz) Package LQFP064-P-1414 *Lead-free MN101CF58D 64 K 2K 0.1 s (at 4.5 V to 5.5 V, 20 MHz) 0.25 s (at 4.5 V to 5.5 V, 8 MHz) 62.5 s (at 4.5 V to 5.5 V, 32 kHz) Package LQFP064-P-1414 *Lead-free Flash Memory Built-in Type Type ROM (x 8-bit) RAM (x 8-bit) Minimum instruction execution time VDD C1 C2 XI VSS XO MAD00014EEM 140 www..com MN101C589 , MN101C58A MAD00014EEM 141 www..com MN101C66D, MN101C66G Type ROM (x 8-bit) x RAM (x 8-bit) x Package Minimum Instruction Execution Time MN101C66D 64 K 2K QFP084-P-1818E *Lead-free, LQFP080-P-1414A *Lead-fre 0.1 s (at 4.5 V to 5.5 V, 20 MHz) 0.25 s (at 2.7 V to 5.5 V, 8 MHz) 62.5 s (at 2.0 V to 5.5 V, 32 kHz)*1 *1 The lower limit for operation guarantee for flash memory built-in type is 2.5 V. The lower limit for operation guarantee for EPROM built-in type is 2.3 V. * RESET * Watchdog * External 0 * External 1 * External 2 * External 3* 1 * External 4 (key interrupt dedicated) * Timer 0 * Timer 1 * Timer 2 * Timer 3 * Timer 6 * Time base * Timer 7 (2 systems) * Timer 8 (2 systems) * Serial 0 (2 systems) * Serial 2 * A/D conversion finish *1 LQFP080-P-1414A: Not mounted Timer counter 0 : 8-bit x 1 (square-wave/8-bit PWM output, event count, generation of remote control carrier, simple pulse width measurement) (square-wave/PWM output to large current terminal P50 possible) Clock source ********************* 1/2, 1/4 of system clock frequency; 1/1, 1/4, 1/16, 1/32, 1/64 of OSC oscillation clock frequency; 1/1 of XI oscillation clock frequency; external clock input Interrupt source ***************** coincidence with compare register 0 Timer counter 1 : 8-bit x 1 (square-wave output, event count, synchronous output event) Clock source ********************* 1/2, 1/8 of system clock frequency; 1/1, 1/4, 1/16, 1/8192, 1/32768 of OSC oscillation clock frequency; 1/1 of XI oscillation clock frequency; external clock input Interrupt source ***************** coincidence with compare register 1 Timer counter 0, 1 can be cascade-connected. Timer counter 2 : 8-bit x 1 (square-wave output, additional pulse type 10-bit PWM output, event count, synchronous output event, simple pulse width measurement) (square-wave/PWM output to large current terminal P52 possible) Clock source ********************* 1/2, 1/4 of system clock frequency; 1/1, 1/4, 1/16, 1/32, 1/64 of OSC oscillation clock frequency; 1/1 of XI oscillation clock frequency; external clock input Interrupt source ***************** coincidence with compare register 2 Timer counter 3 : 8-bit x 1 (square-wave output, event count, generation of remote control carrier, serial 0 baud rate timer) Clock source ********************* 1/2, 1/8 of system clock frequency; 1/1, 1/4, 1/16, 1/64, 1/128 of OSC oscillation clock frequency; 1/1 of XI oscillation clock frequency; external clock input Interrupt source ***************** coincidence with compare register 3 Timer counter 2, 3 can be cascade-connected. Timer counter 6 : 8-bit freerun timer Clock source ********************* 1/1 of system clock frequency; 1/1, 1/4096, 1/8192 of OSC oscillation clock frequency; 1/1, 1/4096, 1/8192 of XI oscillation clock frequency Interrupt source ***************** coincidence with compare register 6 Timer counter 7 : 16-bit x 1 (square-wave output, IGBT/16-bit PWM output (cycle / duty continuous variable), event count, synchronous output evevt, pulse width measurement, input capture) (square-wave/PWM output to large current terminal P51 possible) Clock source ********************* 1/1, 1/2, 1/4, 1/16 of system clock frequency; 1/1, 1/2, 1/4, 1/16 of OSC oscillation clock frequency; 1/1, 1/2, 1/4, 1/16 of external clock input frequency Interrupt source ***************** coincidence with compare register 7 (2 lines) MN101C66G [ES (Engineering Sample) available] 128 K 4K Interrupts Timer Counter MAD00017GEM 142 www..com MN101C66D, MN101C66G Timer Counter (Continue) Timer counter 8: 16 bit x 1 (square-wave/16-bit PWM output [duty continuous variable], event count, pulse width measurement, inputcapture) (square-wave/PWM output to large current terminal P53 possible) Clock source ********************* 1/1, 1/2, 1/4, 1/16, 1/128 of system clock frequency; 1/1, 1/2, 1/4, 1/16, 1/128 of OSC oscillation clock frequency; 1/1, 1/2, 1/4, 1/16 of external clock input frequency Interrupt source ***************** coincidence with compare register 8 (2 lines) Timer counters 7, 8 can be cascade-connected. (square-wave output, PWM, input capture, pulse width measurement is possible as a 32-bit timer.) Time base timer (one-minute count setting) Clock source ********************* 1/1 of OSC oscillation clock frequency; 1/1 of XI oscillation clock frequency Interrupt source ***************** 1/128, 1/256, 1/512, 1/1024, 1/8192, 1/32768 of clock source frequency Watchdog timer Interrupt source ***************** 1/65536, 1/262144, 1/1048576 of system clock frequency Serial Interface Serial 0 : synchronous type/UART (full-duplex) x 1 Clock source ********************* 1/2, 1/4 of system clock frequency; pulse output of timer counter 3; 1/2, 1/4, 1/16, 1/64 of OSC oscillation clock frequency Serial 2 : synchronous type x 1 Clock source ********************* 1/2, 1/4 of system clock frequency; pulse output of timer counter 3; 1/2, 1/4, 1/16, 1/32 of OSC oscillation clock frequency I/O Pins I/O Input 61 (60) 4 (3) * Common use * Specified pull-up resistor available * Input/output selectable (bit unit) ( ): LQFP080-P-1414A * Common use * Specified pull-up resistor available ( ): LQFP080-P-1414A A/D Inputs LCD 10-bit x 8-ch. (with S/H) 32 segments x 4 commons (static, 1/2, 1/3, or 1/4 duty) LCD power supply separated from VDD (usable if VLCD VDD) LCD power shunt resistance contained Buzzer output, remote control carrier signal output, high-current drive port Special Ports Electrical Characteristics Supply current Limit Parameter Symbol IDD1 Operating supply current IDD2 IDD3 IDD4 Supply current at HALT IDD5 IDD6 Supply current at STOP IDD7 Condition min fosc = 20 MHz, VDD = 5 V fosc = 8 MHz, VDD = 5 V fx = 32 kHz, VDD = 3 V fx = 32 kHz, VDD = 3 V, Ta = 25C fx = 32 kHz, VDD = 3 V, Ta = -40C to +85C VDD = 5 V, Ta = 25C VDD = 5 V, Ta = -40C to +85C typ 25 10 30 4 max 60 25 100 8 30 2 50 mA mA A A A A A Unit See the next page for pin assignment and support tool. MAD00017GEM 143 www..com Pin Assignment P47/KEY7/SEG24/SDO7 P46/KEY6/SEG25/SDO6 P45/KEY5/SEG26/SDO5 P44/KEY4/SEG27/SDO4 P43/KEY3/SEG28/SDO3 P42/KEY2/SEG29/SDO2 P41/KEY1/SEG30/SDO1 P47/KEY7/SEG24/SDO7 P46/KEY6/SEG25/SDO6 P45/KEY5/SEG26/SDO5 P44/KEY4/SEG27/SDO4 P43/KEY3/SEG28/SDO3 P42/KEY2/SEG29/SDO2 P41/KEY1/SEG30/SDO1 P40/KEY0/SEG31/SDO0 P40/KEY0/SEG31/SDO0 P21/IRQ1/ACZ P21/IRQ1/ACZ 44 P67/SEG16 P66/SEG17 P65/SEG18 P64/SEG19 P63/SEG20 P62/SEG21 P61/SEG22 P67/SEG16 P66/SEG17 P65/SEG18 P64/SEG19 P63/SEG20 P62/SEG21 P61/SEG22 P60/SEG23 P60/SEG23 P23/IRQ3 P22/IRQ2 45 P22/IRQ2 P20/IRQ0 VDD 63 62 61 60 59 58 57 56 55 54 53 52 51 50 49 48 47 46 60 59 58 57 56 55 54 53 52 51 50 49 48 47 46 45 44 43 42 41 P70/SEG15 P71/SEG14 P72/SEG13 P73/SEG12 P74/SEG11 P75/SEG10 P76/SEG9 P77/SEG8 P80/SEG7 P81/SEG6 P82/SEG5 P83/SEG4 P84/SEG3 P85/SEG2 P86/SEG1 P87/SEG0 COM0/P30 COM1/P31 COM2/P32 COM3/P33 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 10 11 12 13 14 15 16 17 18 19 20 40 39 38 37 36 35 34 33 32 TM8IO/P15 TM7IO/P14 TM3IO/P13 TM2IO/P12 TM1IO/P11 RMOUT/TM0IO/P10 BUZZER/P06 SBT2/P05 SBI2/P04 SBO2/P03 SBT0/P02 RXD/SBI0/P01 TXD/SBO0/P00 VDD VREFAN7/PA7 AN6/PA6 AN5/PA5 AN4/PA4 AN3/PA3 P70/SEG15 P71/SEG14 P72/SEG13 P73/SEG12 P74/SEG11 P75/SEG10 P76/SEG9 P77/SEG8 P80/SEG7 P81/SEG6 P82/SEG5 P83/SEG4 P84/SEG3 P85/SEG2 P86/SEG1 P87/SEG0 NC COM0/P30 COM1/P31 COM2/P32 COM3/P33 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 10 11 12 13 14 15 16 17 18 19 20 1 2 3 4 5 6 7 8 9 43 P20/IRQ0 VDD 42 41 40 39 38 37 36 35 34 TM8IO/P15 TM7IO/P14 TM3IO/P13 TM2IO/P12 TM1IO/P11 RMOUT/TM0IO/P10 BUZZER/P06 SBT2/P05 SBI2/P04 SBO2/P03 SBT0/P02 RXD/SBI0/P01 TXD/SBO0/P00 VDD VREFAN7/PA7 AN6/PA6 AN5/PA5 AN4/PA4 AN3/PA3 AN2/PA2 MN101C66D MN101C66G 31 30 29 28 27 26 25 24 23 22 21 MN101C66D MN101C66G 33 32 31 30 29 28 27 26 25 24 23 22 21 1 2 3 4 5 6 7 8 9 N.C N.C MMOD XI XO VDD TM0O/LED0/P50 TM7O/LED1/P51 TM2O/LED2/P52 TM8O/LED3/P53 NATRST NRST/P27 VREF+ VLC1 VLC2 VLC3 VSS OSC2 OSC1 AN0/PA0 TM7O/LED1/P51 TM2O/LED2/P52 TM8O/LED3/P53 NRST/P27 AN0/PA0 AN1/PA1 LQFP080-P-1414A *Lead-free AN2/PA2 QFP084-P-1818E *Lead-free Support Tool In-circuit Emulator EPROM Built-in Type PX-ICE101C / D + PX-PRB101C66-QFP084-P-1818E-M PX-ICE101C / D + PX-PRB101C66-LQFP080-P-1414A-M Type ROM (x 8-bit) RAM (x 8-bit) Minimum instruction execution time MN101CP66D 64 K 2K 0.1 s (at 4.5 V to 5.5 V, 20 MHz) 0.25 s (at 2.7 V to 5.5 V, 8 MHz) 62.5 s (at 2.3 V to 5.5 V, 32 kHz) Package LQFP080-P-1414A *Lead-free, QFP084-P-1818E *Lead-free MN101CF66G 128 K 4K 0.1 s (at 4.5 V to 5.5 V, 20 MHz) 0.25 s (at 2.7 V to 5.5 V, 8 MHz) 62.5 s (at 2.5 V to 5.5 V, 32 kHz) Package LQFP080-P-1414A *Lead-free, QFP084-P-1818E *Lead-free Flash Memory Built-in Type Type ROM (x 8-bit) RAM (x 8-bit) Minimum instruction execution time AN1/PA1 XI N.C N.C OSC2 OSC1 XO VLC1 VLC2 VLC3 VDD MMOD VREF+ VSS MAD00017GEM 144 www..com MN101C66D, MN101C66G MAD00017GEM 145 www..com MN101C70C Type ROM (x 8-bit) x RAM (x 8-bit) x Package Minimum Instruction Execution Time LQFP080-P-1414A *Lead-free, MN101C70C 48 K 2K TQFP080-P-1212D *Lead-free (under planning) 0.1 s (at 3.0 V to 3.6 V, 10 MHz) 0.235 s (at 1.8 V to 3.6 V, 4.25 MHz) 62.5 s (at 1.8 V to 3.6 V, 32 kHz) * The lower limit for operation guarantee for flash memory built-in type is 2.2 V. * RESET * Watchdog * External 0 * External 1 * External 2 * External 4 (key interrupt dedicated) * Timer 0 * Timer 1 * Timer 2 * Timer 3 * Timer 6 * Time base * Timer 7 (2 systems) * Timer 8 (2 systems) * Serial 0 (2 systems) * Serial 2 * A/D conversion finish * Automatic transfer finish Timer counter 0 : 8-bit x 1 (square-wave/8-bit PWM output, event count, generation of remote control carrier, simple pulse width measurement, added pluse (2-bit) system PWM output, real time output control) (square-wave/PWM output to large current terminal P50 possible) Clock source ********************* 1/2, 1/4 of system clock frequency; 1/1, 1/4, 1/16, 1/32, 1/64 of OSC oscillation clock frequency; 1/1 of XI oscillation clock frequency; external clock input Interrupt source ***************** coincidence with compare register 0 Timer counter 1 : 8-bit x 1 (square-wave output, event count, synchronous output event) Clock source ********************* 1/2, 1/8 of system clock frequency; 1/1, 1/4, 1/16, 1/64, 1/128 of OSC oscillation clock frequency; 1/1 of XI oscillation clock frequency; external clock input Interrupt source ***************** coincidence with compare register 1 Timer counter 0, 1 can be cascade-connected. Timer counter 2 : 8-bit x 1 (square-wave output, added pluse (2-bit) system PWM output, PWM output, serial transfer clock output, real time output control, event count, synchronous output event, simple pulse width measurement) (square-wave/PWM output to large current terminal P52 possible) Clock source ********************* 1/2, 1/4 of system clock frequency; 1/1, 1/4, 1/16, 1/32, 1/64 of OSC oscillation clock frequency; 1/1 of XI oscillation clock frequency; external clock input Interrupt source ***************** coincidence with compare register 2 Timer counter 3 : 8-bit x 1 (square-wave output, event count, generation of remote control carrier, serial transfer clock) Clock source ********************* 1/2, 1/8 of system clock frequency; 1/1, 1/4, 1/16, 1/64, 1/128 of OSC oscillation clock frequency; 1/1 of XI oscillation clock frequency; external clock input Interrupt source ***************** coincidence with compare register 3 Timer counter 2, 3 can be cascade-connected. Timer counter 6 : 8-bit freerun timer Clock source ********************* 1/1 of system clock frequency; 1/1, 1/128, 1/8192 of OSC oscillation clock frequency; 1/1, 1/128, 1/8192 of XI oscillation clock frequency Interrupt source ***************** coincidence with compare register 6 Timer counter 7 : 16-bit x 1 (square-wave output, 16-bit PWM output (cycle / duty continuous variable), event count, synchronous output event, pulse width measurement, input capture, real time output control, high performance IGBT output (Cycle/Duty can be changed constantly)) (square-wave/PWM output to large current terminal P51 possible) Clock source ********************* 1/1, 1/2, 1/4, 1/16 of system clock frequency; 1/1, 1/2, 1/4, 1/16 of OSC oscillation clock frequency; 1/1, 1/2, 1/4, 1/16 of external clock input frequency Interrupt source ***************** coincidence with compare register 7 (2 lines), input capture register Interrupts Timer Counter MAD00035HEM 146 www..com MN101C70C Timer Counter (Continue) Timer counter 8: 16 bit x 1 (square-wave/16-bit PWM output [duty continuous variable], event count, pulse width measurement, input capture) (square-wave/PWM output to large current terminal P53 possible) Clock source ********************* 1/1, 1/2, 1/4, 1/16 of system clock frequency; 1/1, 1/2, 1/4, 1/16 of OSC oscillation clock frequency; 1/1, 1/2, 1/4, 1/16 of external clock input frequency Interrupt source ***************** coincidence with compare register 8 (2 lines), input capture register Timer counters 7, 8 can be cascade-connected. (square-wave output, PWM is possible as a 32-bit timer.) Time base timer (one-minute count setting) Clock source ********************* 1/1 of OSC oscillation clock frequency; 1/1 of XI oscillation clock frequency Interrupt source ***************** 1/128, 1/256, 1/512, 1/1024, 1/8192, 1/32768, of clock source frequency Watchdog timer Interrupt source ***************** 1/65536, 1/262144, 1/1048576 of system clock frequency DMA Controller (Automatic Data Transfer) Serial Interface Max. Transfer cycles : 255 Starting factor : external request, various types of interrupt, software Transfer mode : 1-byte transfer, word transfer, burst transfer Serial 0 : synchronous type/UART (full-duplex) x 1 Clock source ********************* 1/2, 1/4 of system clock frequency; pulse output of timer counter 2 or 3; 1/2, 1/4, 1/16, 1/64 of OSC oscillation clock frequency, external clock Serial 2 : synchronous type/single-master I2C x 1 Clock source ********************* 1/2, 1/4 of system clock frequency; pulse output of timer counter 2 or 3; 1/2, 1/4, 1/16, 1/32 of OSC oscillation clock frequency, external clock I/O Pins A/D Inputs LCD I/O 66 * Common use * Specified pull-up resistor available * Input/output selectable (bit unit) 10-bit x 16-ch. (with S/H) 32 segments x 4 commons (static, 1/2, 1/3, or 1/4 duty) LCD power supply separated from VDD (usable if VDD VLCD 3.6 V) LCD power step-up circuit contained (3/2, 2 and 3 times) LCD power shunt resistance contained LCD reference voltage is contained. Buzzer output, remote control carrier signal output, high-current drive port Correcting address designation : up to 3 addresses possible Special Ports ROM Correction Electrical Characteristics Supply current Limit Parameter Symbol IDD1 Operating supply current IDD2 IDD3 Supply current at HALT IDD4 IDD5 Supply current at STOP IDD6 Condition min fosc = 4 MHz, VDD = 3 V fx = 32 kHz, VDD = 3 V fx = 32 kHz, VDD = 3 V, Ta = 25C fx = 32 kHz, VDD = 3 V, Ta = -40C to +85C VDD = 3 V, Ta = 25C VDD = 3 V, Ta = -40C to +85C typ 1 4 2 max 1.8 15 5 10 2 8 mA A A A A A Unit See the next page for pin assignment and support tool. MAD00035HEM 147 www..com Pin Assignment P62/SEG21/SBO0B/TXDB P63/SEG20/SBI0B/RXDB P47/KEY7/SEG24/SDO7 P46/KEY6/SEG25/SDO6 P45/KEY5/SEG26/SDO5 P44/KEY4/SEG27/SDO4 P43/KEY3/SEG28/SDO3 P42/KEY2/SEG29/SDO2 P41/KEY1/SEG30/SDO1 P40/KEY0/SEG31/SDO0 P61/SEG22/NBUZZERB P60/SEG23/BUZZERB P64/SEG19/SBT0B P21/IRQ1/ACZ 42 P67/SEG16 P66/SEG17 P65/SEG18 P22/IRQ2 43 60 59 58 57 56 55 54 53 52 51 50 49 48 47 46 45 44 P70/SEG15 P71/SEG14 P72/SEG13 P73/SEG12 P74/SEG11 P75/SEG10 P76/SEG9 P77/SEG8 P80/SEG7 P81/SEG6 P82/SEG5 P83/SEG4 P84/SEG3 P85/SEG2 P86/SEG1 P87/SEG0 P30/COM0 P31/COM1 P32/COM2 P33/COM3 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 10 11 12 13 14 15 16 17 18 19 20 40 39 38 37 36 35 34 33 32 41 P20/IRQ0 VDD TM8IO/P15 TM7IO/P14 TM3IO/P13 TM2IO/P12 TM1IO/P11 RMOUT/TM0IO/P10 SBT2/P07 SBI2/P06 SBO2/P05 SBT0A/P04 RXDA/SBI0A/P03 TXDA/SBO0A/P02 NBUZZERA/AN9/P01 BUZZERA/AN8/P00 AN7/PA7 AN6/PA6 AN5/PA5 AN4/PA4 AN3/PA3 AN2/PA2 MN101C70C 31 30 29 28 27 26 25 24 23 22 21 1 2 3 4 5 6 7 8 TM0O/LED0/P50/C1 TM7O/LED1/P51 TM2O/LED2/P52 TM8O/LED3/P53 9 NRST/P27 AN0/PA0 SOSCMD LQFP080-P-1414A *Lead-free TQFP080-P-1212D *Lead-free Support Tool In-circuit Emulator Flash Memory Built-in Type PX-ICE101C / D + PX-PRB101C70-LQFP080-P-1414A-M PX-ICE101C / D + PX-PRB101C70-TQFP080-P-1212-M Type ROM (x 8-bit) RAM (x 8-bit) Minimum instruction execution time MN101CF70D (under development) 64 K 4K 0.1 s (at 3.0 V to 3.6 V, 10 MHz) 0.235 s (at 2.2 V to 3.6 V, 4.25 MHz) 62.5 s (at 2.2 V to 3.6 V, 32 kHz) Package LQFP080-P-1414A *Lead-free (under development) TQFP080-P-1212D *Lead-free (under planning) AN1/PA1 OSC2 OSC1 SSTRT VSS XO C2 XI VDD VLC2 VLC3/P34 VLC1 Vref+ MAD00035HEM 148 www..com MN101C70C MAD00035HEM 149 www..com MN101C73A Type ROM (x 8-bit) x RAM (x 8-bit) x Package Minimum Instruction Execution Time TQFP064-P-1010C *Lead-free, MN101C73A 32 K 1.5 K LQFP064-P-1414 *Lead-free (under planning) 0.1 s (at 3.0 V to 3.6 V, 10 MHz) 0.235 s (at 1.8 V to 3.6 V, 4.25 MHz) 62.5 s (at 1.8 V to 3.6 V, 32 kHz) * The lower limit for operation guarantee for flash memory built-in type is 2.2 V. * RESET * Watchdog * External 0 * External 1 * External 2 * External 3 * External 4 * External 5 * External 6 (key interrupt dedicated) * Timer 0 * Timer 1 * Timer 2 * Timer 3 * Timer 6 * Time base * Timer 7 (2 systems) * Timer 8 (2 systems) * Serial 0 (2 systems) * Serial 1 (2 systems) * Serial 3 * A/D conversion finish Timer counter 0 : 8-bit x 1 (square-wave/8-bit PWM output, event count, generation of remote control carrier, simple pulse width measurement, added pluse (2-bit) system PWM output) (square-wave/PWM output to large current terminal P50 possible) Clock source ********************* 1/2, 1/4 of system clock frequency; 1/1, 1/4, 1/16, 1/32, 1/64 of OSC oscillation clock frequency; 1/1 of XI oscillation clock frequency; external clock input Interrupt source ***************** coincidence with compare register 0 Timer counter 1 : 8-bit x 1 (square-wave output, event count, synchronous output event) Clock source ********************* 1/2, 1/8 of system clock frequency; 1/1, 1/4, 1/16, 1/64, 1/128 of OSC oscillation clock frequency; 1/1 of XI oscillation clock frequency; external clock input; timer counter 8 output Interrupt source ***************** coincidence with compare register 1 Timer counter 0, 1 can be cascade-connected. Timer counter 2 : 8-bit x 1 (square-wave output, added pluse (2-bit) system PWM output, PWM output, serial transfer clock output, event count, synchronous output event, simple pulse width measurement) (square-wave/PWM output to large current terminal P51 possible) Clock source ********************* 1/2, 1/4 of system clock frequency; 1/1, 1/4, 1/16, 1/32, 1/64 of OSC oscillation clock frequency; 1/1 of XI oscillation clock frequency; external clock input Interrupt source ***************** coincidence with compare register 2 Timer counter 3 : 8-bit x 1 (square-wave output, event count, serial transfer clock) Clock source ********************* 1/2, 1/8 of system clock frequency; 1/1, 1/4, 1/16, 1/64, 1/128 of OSC oscillation clock frequency; 1/1 of XI oscillation clock frequency; external clock input Interrupt source ***************** coincidence with compare register 3 Timer counter 2, 3 can be cascade-connected. Timer counter 6 : 8-bit freerun timer Clock source ********************* 1/1 of system clock frequency; 1/1, 1/128, 1/8192 of OSC oscillation clock frequency; 1/1, 1/128, 1/8192 of XI oscillation clock frequency Interrupt source ***************** coincidence with compare register 6 Interrupts Timer Counter MAD00047CEM 150 www..com MN101C73A Timer Counter (Continue) Timer counter 7 : 16-bit x 1 (square-wave output, 16-bit PWM output (cycle / duty continuous variable), event count, synchronous output event, pulse width measurement, input capture, real time output control, high performance IGBT output (Cycle/Duty can be changed constantly)) (square-wave/PWM output to large current terminal P52 possible) Clock source ********************* 1/1, 1/2, 1/4, 1/16 of system clock frequency; 1/1, 1/2, 1/4, 1/16 of OSC oscillation clock frequency; 1/1, 1/2, 1/4, 1/16 of external clock input frequency Interrupt source ***************** coincidence with compare register 7 (2 lines), input capture register Timer counter 8: 16 bit x 1 (square-wave/16-bit PWM output [duty continuous variable], event count, pulse width measurement, input capture) (square-wave/PWM output to large current terminal P53 possible) Clock source ********************* 1/1, 1/2, 1/4, 1/16 of system clock frequency; 1/1, 1/2, 1/4, 1/16 of OSC oscillation clock frequency; 1/1, 1/2, 1/4, 1/16 of external clock input frequency Interrupt source ***************** coincidence with compare register 8 (2 lines), input capture register Timer counters 7, 8 can be cascade-connected. (square-wave output, PWM is possible as a 32-bit timer.) Time base timer (one-minute count setting) Clock source ********************* 1/1 of OSC oscillation clock frequency; 1/1 of XI oscillation clock frequency Interrupt source ***************** 1/128, 1/256, 1/512, 1/1024, 1/4096, 1/8192, 1/16384, 1/32768, of clock source frequency Watchdog timer Interrupt source ***************** 1/65536, 1/262144, 1/1048576 of system clock frequency Serial Interface Serial 0 : synchronous type/UART (full-duplex) x 1 Clock source ********************* 1/2, 1/4 of system clock frequency; pulse output of timer counter 1 or 2; 1/2, 1/4, 1/16, 1/64 of OSC oscillation clock frequency, external clock Serial 1 : synchronous type/UART (full-duplex) x 1 Clock source ********************* 1/2, 1/4 of system clock frequency; pulse output of timer counter 1 or 2; 1/2, 1/4, 1/16, 1/64 of OSC oscillation clock frequency, external clock Serial 3 : synchronous type/single-master I2C x 1 Clock source ********************* 1/2, 1/4 of system clock frequency; pulse output of timer counter 2 or 3; 1/2, 1/4, 1/16, 1/32 of OSC oscillation clock frequency, external clock I/O Pins A/D Inputs LCD I/O 55 * Common use * Specified pull-up resistor available * Input/output selectable (bit unit) 10-bit x 12-ch. (with S/H) 32 segments x 4 commons (static, 1/2, 1/3, or 1/4 duty) Usable if VLCD VDD LCD power shunt resistance contained Buzzer output, remote control carrier signal output, high-current drive port Correcting address designation : up to 3 addresses possible Special Ports ROM Correction See the next page for pin assignment and support tool. MAD00047CEM 151 www..com Electrical Characteristics Supply current Limit Parameter Symbol IDD1 Operating supply current IDD2 IDD3 Supply current at HALT IDD4 IDD5 Supply current at STOP IDD6 Condition min fosc = 4 MHz, VDD = 3 V fx = 32 kHz, VDD = 3 V fx = 32 kHz, VDD = 3 V, Ta = 25C fx = 32 kHz, VDD = 3 V, Ta = -40C to +85C VDD = 3 V, Ta = 25C VDD = 3 V, Ta = -40C to +85C typ 1 4 2 max 1.8 15 5 10 2 8 mA A A A A A Unit Pin Assignment SEG15/P60/SBO0B/TXD0B SEG18/P05/SBO1B/TXD1B 34 SEG14/P61/SBI0B/RXD0B SEG17/P06/SBI1B/RXD1B 35 SEG10/P71/KEY1B SEG11/P70/KEY0B SEG13/P62/SBT0B SEG16/P07/SBT1B SEG4/P77/KEY7B SEG5/P76/KEY6B SEG6/P75/KEY5B SEG7/P74/KEY4B SEG8/P73/KEY3B SEG9/P72/KEY2B 48 47 46 45 44 43 42 41 40 39 38 37 36 SEG3/P64 SEG2/P65 SEG1/P66 SEG0/P67 COM0/P30 COM1/P31 COM2/P32 COM3/P33 SEG24/P8O/SDO0/TM7IOB SEG25/P81/SDO1/TM8IOB SEG26/P82/SDO2/TM0IOB SEG27/P83/SDO3/TM1IOB SEG28/P84/SDO4/TM2IOB SEG29/P85/SDO5/TM3IOB SEG30/P86/SDO6 SEG31/P87/SDO7 33 SEG19/P04/SBT3 32 31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 SEG12/P63 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 SEG20/SBO3/P03 SEG21/SBI3/IRQ5/P02 SEG22/NBUZZER/IRQ4/P01 SEG23/BUZZERA/IRQ3/P00 IRQ2/SBT1A/P23 IRQ1/SBI1A/RXD1A/P22 IRQ0/SBO1A/TXD1A/P21 Vref+/P20 AN0/KEY7A/TM3IOA/P17 AN1/KEY6A/TM2IOA/P16 AN2/KEY5A/TM1IOA/P15 AN3/KEY4A/SBT0A/TM0IOA/P14 AN4/KEY3A/SBI0A/RXD0A/P13 AN5/KEY2A/SBO0A/TXD0A/P12 AN6/KEY1A/TM8IOA/P11 AN7/KEY0A/TM7IOA/P10 MN101C73A 10 11 12 13 14 15 AN9/BUZZERB/TM7O/LED2/P52 XO VDD XI OSC2 P34/VLC3 P35/VLC2 P36/VLC1 OSC1 VDD (Flash VPP) NRST/P27 VSS TQFP064-P-1010C *Lead-free LQFP064-P-1414 *Lead-free AN11/RMOUT/TM0O/LED0/P50 AN10/TM2O/LED1/P51 AN8/TM8O/LED3/P53 MMOD 16 1 2 3 4 5 6 7 8 9 MAD00047CEM 152 www..com MN101C73A Support Tool In-circuit Emulator Flash Memory Built-in Type PX-ICE101C / D + PX-PRB101C73-TQFP064-P-1010C-M PX-ICE101C / D + PX-PRB101C73-LQFP064-P-1414-M Type ROM (x 8-bit) RAM (x 8-bit) Minimum instruction execution time MN101CF73A 32 K 2K 0.1 s (at 3.0 V to 3.6 V, 10 MHz) 0.235 s (at 2.2 V to 3.6 V, 4.25 MHz) 62.5 s (at 2.2 V to 3.6 V, 32 kHz) Package TQFP064-P-1010C *Lead-free, LQFP064-P-1414 *Lead-free (under planning) MAD00047CEM 153 www..com MN101C74F, MN101C74G Type ROM (x 8-bit) x RAM (x 8-bit) x Package Minimum Instruction Execution Time MN101C74F 96 K 6K 0.1 s (at 3.0 V to 3.6 V, 10 MHz) 0.235 s (at 1.8 V to 3.6 V, 4.25 MHz) 62.5 s (at 1.8 V to 3.6 V, 32 kHz) * The lower limit for operation guarantee for flash memory built-in type is 2.2 V. * RESET * Watchdog * External 0 * External 1 * External 2 * External 3 * External 4 * External 5 * External 6 (key interrupt dedicated) * Timer 0 * Timer 1 * Timer 2 * Timer 3 * Timer 6 * Time base * Timer 7 (2 systems) * Timer 8 (2 systems) * Serial 0 (2 systems) * Serial 1 (2 systems) * Serial 3 * A/D conversion finish * Automatic transfer finish Timer counter 0 : 8-bit x 1 (square-wave/8-bit PWM output, event count, generation of remote control carrier, simple pulse width measurement, added pluse (2-bit) system PWM output) (square-wave/PWM output to large current terminal PC3 possible) Clock source ********************* 1/2, 1/4 of system clock frequency; 1/1, 1/4, 1/16, 1/32, 1/64 of OSC oscillation clock frequency; 1/1 of XI oscillation clock frequency; external clock input Interrupt source ***************** coincidence with compare register 0 Timer counter 1 : 8-bit x 1 (square-wave output, event count, synchronous output event) Clock source ********************* 1/2, 1/8 of system clock frequency; 1/1, 1/4, 1/16, 1/64, 1/128 of OSC oscillation clock frequency; 1/1 of XI oscillation clock frequency; external clock input; timer counter 8 output Interrupt source ***************** coincidence with compare register 1 Timer counter 0, 1 can be cascade-connected. Timer counter 2 : 8-bit x 1 (square-wave output, added pluse (2-bit) system PWM output, PWM output, serial transfer clock output, event count, synchronous output event, simple pulse width measurement) (square-wave/PWM output to large current terminal PC5 possible) Clock source ********************* 1/2, 1/4 of system clock frequency; 1/1, 1/4, 1/16, 1/32, 1/64 of OSC oscillation clock frequency; 1/1 of XI oscillation clock frequency; external clock input Interrupt source ***************** coincidence with compare register 2 Timer counter 3 : 8-bit x 1 (square-wave output, event count, generation of remote control carrier, serial transfer clock) Clock source ********************* 1/2, 1/8 of system clock frequency; 1/1, 1/4, 1/16, 1/64, 1/128 of OSC oscillation clock frequency; 1/1 of XI oscillation clock frequency; external clock input Interrupt source ***************** coincidence with compare register 3 Timer counter 2, 3 can be cascade-connected. Timer counter 6 : 8-bit freerun timer Clock source ********************* 1/1 of system clock frequency; 1/1, 1/128, 1/8192 of OSC oscillation clock frequency; 1/1, 1/128, 1/8192 of XI oscillation clock frequency Interrupt source ***************** coincidence with compare register 6 Timer counter 7 : 16-bit x 1 (square-wave output, 16-bit PWM output (cycle / duty continuous variable), event count, synchronous output event, pulse width measurement, input capture, real time output control, high performance IGBT output (Cycle/Duty can be changed constantly)) (square-wave/PWM output to large current terminal PC4 possible) Clock source ********************* 1/1, 1/2, 1/4, 1/16 of system clock frequency; 1/1, 1/2, 1/4, 1/16 of OSC oscillation clock frequency; 1/1, 1/2, 1/4, 1/16 of external clock input frequency Interrupt source ***************** coincidence with compare register 7 (2 lines), input capture register MAD00048CEM MN101C74G 128 K 6K QFP100-P-1818B *Lead-free, LQFP100-P-1414 *Lead-free, MLGA100-L-1010 *Lead-free Interrupts Timer Counter 154 www..com MN101C74F, MN101C74G Timer Counter (Continue) Timer counter 8: 16 bit x 1 (square-wave/16-bit PWM output [duty continuous variable], event count, pulse width measurement, input capture) (square-wave/PWM output to large current terminal PC6 possible) Clock source ********************* 1/1, 1/2, 1/4, 1/16 of system clock frequency; 1/1, 1/2, 1/4, 1/16 of OSC oscillation clock frequency; 1/1, 1/2, 1/4, 1/16 of external clock input frequency Interrupt source ***************** coincidence with compare register 8 (2 lines), input capture register Timer counters 7, 8 can be cascade-connected. (square-wave output, PWM is possible as a 32-bit timer.) Time base timer (one-minute count setting) Clock source ********************* 1/1 of OSC oscillation clock frequency; 1/1 of XI oscillation clock frequency Interrupt source ***************** 1/128, 1/256, 1/512, 1/1024, 1/4096, 1/8192, 1/16384, 1/32768, of clock source frequency Watchdog timer Interrupt source ***************** 1/65536, 1/262144, 1/1048576 of system clock frequency DMA Controller (Automatic Data Transfer) Serial Interface Max. Transfer cycles 255 Starting factor external request, various types of interrupt, software Transfer mode 1-byte transfer, word transfer, burst transfer Serial 0 : synchronous type/UART (full-duplex) x 1 Clock source ********************* 1/2, 1/4 of system clock frequency; pulse output of timer counter 1 or 2; 1/2, 1/4, 1/16, 1/64 of OSC oscillation clock frequency, external clock Serial 1 : synchronous type/UART (full-duplex) x 1 Clock source ********************* 1/2, 1/4 of system clock frequency; pulse output of timer counter 2 or 3; 1/2, 1/4, 1/16, 1/64 of OSC oscillation clock frequency, external clock Serial 3 : synchronous type/single-master I2C x 1 Clock source ********************* 1/2, 1/4 of system clock frequency; pulse output of timer counter 2 or 3; 1/2, 1/4, 1/16, 1/32 of OSC oscillation clock frequency, external clock Serial 4 : I2C slave x 1 Applicable for I2C high-speed transfer mode, 7-bit/10-bit address setting, general call I/O Pins A/D Inputs LCD I/O 87 * Common use * Specified pull-up resistor available * Input/output selectable (bit unit) 10-bit x 16-ch. (with S/H) 47 segments x 4 commons (static, 1/2, 1/3, or 1/4 duty) LCD power supply separated from VDD (usable if VDD VLCD 3.6 V) LCD power step-up circuit contained (3/2, 2 and 3 times) LCD power shunt resistance contained Buzzer output, remote control carrier signal output, high-current drive port Correcting address designation: up to 7 addresses possible Special Ports ROM Correction See the next page for pin assignment and support tool. MAD00048CEM 155 www..com Electrical Characteristics Supply current Limit Parameter Symbol IDD1 Operating supply current IDD2 IDD3 Supply current at HALT IDD4 IDD5 Supply current at STOP IDD6 Condition min fosc = 4 MHz, VDD = 3 V fx = 32 kHz, VDD = 3 V fx = 32 kHz, VDD = 3 V, Ta = 25C fx = 32 kHz, VDD = 3 V, Ta = -40C to +85C VDD = 3 V, Ta = 25C VDD = 3 V, Ta = -40C to +85C typ 1 4 2 max 1.8 15 5 10 2 8 mA A A A A A Unit Pin Assignment P56/SEG25/A6 P55/SEG26/A5 P54/SEG27/A4 P53/SEG28/A3 P52/SEG29/A2 P51/SEG30/A1 P50/SEG31/A0 P47/SEG32/D7/KEY7/SDO7 P46/SEG33/D6/KEY6/SDO6 P45/SEG34/D5/KEY5/SDO5 P44/SEG35/D4/KEY4/SDO4 P43/SEG36/D3/KEY3/SDO3 P42/SEG37/D2/KEY2/SDO2 P41/SEG38/D1/KEY1/SDO1 P40/SEG39/D0/KEY0/SDO0 P06/SEG40/NRE P05/SEG41/NWE P04/SEG42/NCS/SBI3B P03/SEG43/NDK/SBO3B/SDA3B P02/SEG44/SYSCLK/SBT3B/SCL3B P01/SEG45/NBUZZER/SCL4B P00/SEG46/BUZZER/SDA4B P25/IRQ5 P24/IRQ4 P23/IRQ3 COM0/P90 COM1/P91 COM2/P92 COM3/P93 VLC3/P94 VLC2 VLC1 C2 C1/RXD0B/SBI0B/LED0/PC0 TXD0B/SBO0B/LED1/PC1 QFP100-P-1818B *Lead-free LQFP100-P-1414 *Lead-free MLGA100-L-1010 *Lead-free SBT0B/LED2/PC2 TM0O/LED3/PC3 TM7O/LED4/PC4 TM2O/LED5/PC5 TM8O/LED6/PC6 VSS OSC1 OSC2 VDD XI XO MMOD NRST/P27 DMOD Vref+ 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 A7/SEG24/P57 A8/SEG23/P60 A9/SEG22/P61 A10/SEG21/P62 A11/SEG20/P63 A12/SEG19/P64 A13/SEG18/P65 A14/SEG17/P66 A15/SEG16/P67 A16/SEG15/P70 A17/SEG14/P71 SEG13/P72 SEG12/P73 SEG11/P74 SEG10/P75 SEG9/P76 SEG8/P77 SEG7/P80 SEG6/P81 SEG5/P82 SEG4/P83 SEG3/P84 SEG2/P85 SEG1/P86 SEG0/P87 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96 97 98 99 100 75 74 73 72 71 70 69 68 67 66 65 64 63 62 61 60 59 58 57 56 55 54 53 52 51 MN101C74F MN101C74G 50 49 48 47 46 45 44 43 42 41 40 39 38 37 36 35 34 33 32 31 30 29 28 27 26 P22/IRQ2 P21/ACZ1/IRQ1 P20/IRQ0 P15/TM8IO P14/TM7IO P13/TM3IO P12/TM2IO P11/TM1IO P10/TM0IO/RMOUT PB7/AN15/SBI1/RXD1 PB6/AN14/SBO1/TXD1 PB5/AN13/SBT1 PB4/AN12/SBI0A/RXD0A PB3/AN11/SBO0A/TXD0A PB2/AN10/SBT0A PB1/AN9/SCL4A PB0/AN8/SDA4A PA7/AN7/SBI3A PA6/AN6/SBO3A/SDA3A PA5/AN5/SBT3A/SCL3A PA4/AN4 PA3/AN3 PA2/AN2 PA1/AN1 PA0/AN0 MAD00048CEM 156 www..com MN101C74F, MN101C74G Support Tool In-circuit Emulator Flash Memory Built-in Type PX-ICE101C / D + PX-PRB101C74-QFP100-P-1818B-M PX-ICE101C / D + PX-PRB101C74-LQFP100-P-1414-M Type ROM (x 8-bit) RAM (x 8-bit) Minimum instruction execution time MN101CF74G 128 K 6K 0.1 s (at 3.0 V to 3.6 V, 10 MHz) 0.235 s (at 2.2 V to 3.6 V, 4.25 MHz) 62.5 s (at 2.2 V to 3.6 V, 32 kHz) Package QFP100-P-1818B *Lead-free, LQFP100-P-1414 *Lead-free MLGA100-L-1010 *Lead-free MAD00048CEM 157 www..com MN101C78A Type ROM (x 8-bit) x RAM (x 8-bit) x Package Minimum Instruction Execution Time MN101C78A 32 K 1.5 K TQFP048-P-0707B *Lead-free 0.100 s (at 3.0 V to 3.6 V, 10 MHz) 0.118 s (at 2.7 V to 3.6 V, 8.5 MHz) 0.235 s (at 1.8 V to 3.6 V, 4.25 MHz) 62.5 s (at 1.8 V to 3.6 V, 32 kHz) * The lower limit for operation guarantee for flash memory built-in type is 2.2 V. * RESET * Watchdog * External 0 * External 1 * External 2 * External 4 (key interrupt dedicated) * Timer 0 * Timer 1 * Timer 2 * Timer 3 * Timer 6 * Time base * Timer 7 (2 systems) * Timer 8 (2 systems) * Serial 0 (2 systems) * Serial 1 (2 systems) * Serial 3, Serial 4 * A/D conversion finish Timer counter 0 : 8-bit x 1 (square-wave/8-bit PWM output, event count, generation of remote control carrier, simple pulse width measurement, added pluse (2-bit) system PWM output, real time output control) (square-wave/PWM output to large current terminal P50 possible) Clock source ********************* 1/2, 1/4 of system clock frequency; 1/1, 1/4, 1/16, 1/32, 1/64 of OSC oscillation clock frequency; 1/1 of XI oscillation clock frequency; external clock input Interrupt source ***************** coincidence with compare register 0 Timer counter 1 : 8-bit x 1 (square-wave output, event count, synchronous output event) Clock source ********************* 1/2, 1/8 of system clock frequency; 1/1, 1/4, 1/16, 1/64, 1/128 of OSC oscillation clock frequency; 1/1 of XI oscillation clock frequency; external clock input Interrupt source ***************** coincidence with compare register 1 Timer counter 0, 1 can be cascade-connected. Timer counter 2 : 8-bit x 1 (square-wave output, added pluse (2-bit) system PWM output, PWM output, serial transfer clock output, real time output control, event count, synchronous output event, simple pulse width measurement) (square-wave/PWM output to large current terminal P52 possible) Clock source ********************* 1/2, 1/4 of system clock frequency; 1/1, 1/4, 1/16, 1/32, 1/64 of OSC oscillation clock frequency; 1/1 of XI oscillation clock frequency; external clock input Interrupt source ***************** coincidence with compare register 2 Timer counter 3 : 8-bit x 1 (square-wave output, event count, generation of remote control carrier, serial transfer clock) Clock source ********************* 1/2, 1/8 of system clock frequency; 1/1, 1/4, 1/16, 1/64, 1/128 of OSC oscillation clock frequency; 1/1 of XI oscillation clock frequency; external clock input Interrupt source ***************** coincidence with compare register 3 Timer counter 2, 3 can be cascade-connected. Timer counter 6 : 8-bit freerun timer Clock source ********************* 1/1 of system clock frequency; 1/1, 1/128, 1/8192 of OSC oscillation clock frequency; 1/1, 1/128, 1/8192 of XI oscillation clock frequency Interrupt source ***************** coincidence with compare register 6 Timer counter 7 : 16-bit x 1 (square-wave output, 16-bit PWM output (cycle / duty continuous variable), event count, synchronous output event, pulse width measurement, input capture, real time output control, high performance IGBT output) (square-wave/ PWM output to large current terminal P51 possible) Clock source ********************* 1/1, 1/2, 1/4, 1/16 of system clock frequency; 1/1, 1/2, 1/4, 1/16 of OSC oscillation clock frequency; 1/1, 1/2, 1/4, 1/16 of external clock input frequency Interrupt source ***************** coincidence with compare register 7 (2 lines), input capture register MAD00039CEM Interrupts Timer Counter 158 www..com MN101C78A Timer Counter (Continue) Timer counter 8: 16 bit x 1 (square-wave/16-bit PWM output [duty continuous variable], event count, pulse width measurement, input capture) (square-wave/PWM output to large current terminal P53 possible) Clock source ********************* 1/1, 1/2, 1/4, 1/16 of system clock frequency; 1/1, 1/2, 1/4, 1/16 of OSC oscillation clock frequency; 1/1, 1/2, 1/4, 1/16 of external clock input frequency Interrupt source ***************** coincidence with compare register 8 (2 lines), input capture register Timer counters 7, 8 can be cascade-connected. (square-wave output, PWM input capture, pluse width measurement is possible as a 32-bit timer.) Time base timer (one-minute count setting) Clock source ********************* 1/1 of OSC oscillation clock frequency; 1/1 of XI oscillation clock frequency Interrupt source ***************** 1/128, 1/256, 1/512, 1/1024, 1/8192, 1/32768, of clock source frequency Watchdog timer Interrupt source ***************** 1/65536, 1/262144, 1/1048576 of system clock frequency Serial Interface Serial 0 : synchronous type/UART (full-duplex) x 1 Clock source ********************* 1/2, 1/4 of system clock frequency; pulse output of timer counter 1 or 2; 1/2, 1/4, 1/16, 1/64 of OSC oscillation clock frequency, external clock Serial 1 : synchronous type/UART (full-duplex) x 1 Clock source ********************* 1/2, 1/4 of system clock frequency; pulse output of timer counter 1 or 2; 1/2, 1/4, 1/16, 1/64 of OSC oscillation clock frequency, external clock Serial 3 : synchronous type/single-master I2C x 1 Clock source ********************* 1/2, 1/4 of system clock frequency; pulse output of timer counter 2 or 3; 1/2, 1/4, 1/16, 1/32 of OSC oscillation clock frequency, external clock Serial 4 : I2C slave x 1 Applicable for I2C high-speed transfer mode, 7bit/10bit address setting, general call I/O Pins A/D Inputs LCD Special Ports I/O 39 * Common use * Specified pull-up resistor available * Input/output selectable (bit unit) 10-bit x 7-ch. (with S/H) 12 segments x 4 commons (static, 1/2, 1/3, or 1/4 duty) (usable if VLCD VDD) Buzzer output, remote control carrier signal output, high-current drive port Electrical Characteristics Supply current Limit Parameter Symbol IDD1 Operating supply current IDD2 IDD3 Supply current at HALT IDD4 IDD5 Supply current at STOP IDD6 Condition min fosc = 4.25 MHz (fs = fosc / 2), VDD = 3 V fx = 32 kHz (fs = fx / 2), VDD = 3 V fx = 32 kHz, VDD = 3 V, Ta = 25C fx = 32 kHz, VDD = 3 V, Ta = -40C to +85C VDD = 3 V, Ta = 25C VDD = 3 V, Ta = -40C to +85C ( typ max mA A A A A A 0.6(1.3) 1.1(2.2) 4(46) 2(3) 15(90) 5(13) 10(40) 2(3) 8(30) Unit ) : Flash memory built-in type See the next page for pin assignment and support tool. MAD00039CEM 159 www..com Pin Assignment SEG10/P15/TM0OB/TXD1A/SBO1A SEG9/P16/TM2IO/RXD1A/SBI1A NBUZZER/P13/TM7IO/CLKOUT SEG11/P14/TM0IO/RMOUT SEG8/P17/SBT1A/TM2OB SEG6/P71/KEY1/TM3IO SEG7/P70/KEY0/TM1IO BUZZER/P12/TM8IO 27 SEG4/P73/KEY3 SEG5/P72/KEY2 36 35 34 33 32 31 30 29 28 26 SEG3/P74/KEY4 SEG2/P75/KEY5/TXD0B/SBO0B SEG1/P76/KEY6/RXD0B/SBI0B/SDA4B SEG0/P77/KEY7/SBT0B/SCL4B COM0/P30 COM1/P31/SBI3 COM2/P32/SBT3/SCL3 COM3/P33/SB03/SDA3 P34/VLC3 P35/VLC2 P36/VLC1 P37 25 P55/IRQ1/ACZ1 P56/IRQ2 37 38 39 40 41 42 43 44 45 46 47 48 24 23 22 21 20 P54/IRQ0/ACZ0 VDD SBT1B/PA6/AN6 TXD1B/SBO1B/PA5/AN5 RXD1B/SBI1B/PA4/AN4 PA3/AN3 SBT0A/PA2/AN2 RXD0A/SBI0A/PA1/AN1 TXD0A/SBO0A/PA0/AN0 Vref+ P11/SCL4A P10/SDA4A MN101C78A 19 18 17 16 15 14 13 1 2 3 4 5 6 7 8 9 10 XO 11 MMOD TM7O/LED1/P51 TM0OA/LED0/P50 TM2OA/LED2/P52 TM8O/LED3/P53 OSC2 OSC1 VDD TQFP048-P-0707B *Lead-free Support Tool In-circuit Emulator Flash Memory Built-in Type PX-ICE101C / D + PX-PRB101C78-TQFP048-P-0707B-M Type ROM (x 8-bit) RAM (x 8-bit) Minimum instruction execution time MN101CF78A 32 K 1.5 K 0.118 s (at 3.0 V to 3.6 V, 8.5 MHz) 0.125 s (at 2.7 V to 3.6 V, 8.0 MHz) 0.500 s (at 2.2 V to 3.6 V, 2.0 MHz) 62.5 s (at 2.2 V to 3.6 V, 32 kHz) Package TQFP048-P-0707B *Lead-free NRST, P27 XI/P90 VSS 12 MAD00039CEM 160 www..com MN101C78A MAD00039CEM 161 www..com MN101C79A Type ROM (x 8-bit) x RAM (x 8-bit) x Package Minimum Instruction Execution Time MN101C79A 32 K 1.5 K QFN044-P-0606A *Lead-free 0.100 s (at 3.0 V to 3.6 V, 10 MHz) 0.118 s (at 2.7 V to 3.6 V, 8.5 MHz) 0.235 s (at 1.8 V to 3.6 V, 4.25 MHz) 62.5 s (at 1.8 V to 3.6 V, 32 kHz) * The lower limit for operation guarantee for flash memory built-in type is 2.2 V. * RESET * Watchdog * External 0 * External 1 * External 2 * External 4 (key interrupt dedicated) * Timer 0 * Timer 1 * Timer 2 * Timer 3 * Timer 6 * Time base * Timer 7 (2 systems) * Timer 8 (2 systems) * Serial 0 (2 systems) * Serial 1 (2 systems) * Serial 3, Serial 4 * A/D conversion finish Timer counter 0 : 8-bit x 1 (square-wave/8-bit PWM output, event count, generation of remote control carrier, simple pulse width measurement, added pluse (2-bit) system PWM output, real time output control) (square-wave/PWM output to large current terminal P50 possible) Clock source ********************* 1/2, 1/4 of system clock frequency; 1/1, 1/4, 1/16, 1/32, 1/64 of OSC oscillation clock frequency; 1/1 of XI oscillation clock frequency; external clock input Interrupt source ***************** coincidence with compare register 0 Timer counter 1 : 8-bit x 1 (square-wave output, event count, synchronous output event) Clock source ********************* 1/2, 1/8 of system clock frequency; 1/1, 1/4, 1/16, 1/64, 1/128 of OSC oscillation clock frequency; 1/1 of XI oscillation clock frequency; external clock input Interrupt source ***************** coincidence with compare register 1 Timer counter 0, 1 can be cascade-connected. Timer counter 2 : 8-bit x 1 (square-wave output, added pluse (2-bit) system PWM output, PWM output, serial transfer clock output, real time output control, event count, synchronous output event, simple pulse width measurement) (square-wave/PWM output to large current terminal P52 possible) Clock source ********************* 1/2, 1/4 of system clock frequency; 1/1, 1/4, 1/16, 1/32, 1/64 of OSC oscillation clock frequency; 1/1 of XI oscillation clock frequency; external clock input Interrupt source ***************** coincidence with compare register 2 Timer counter 3 : 8-bit x 1 (square-wave output, event count, generation of remote control carrier, serial transfer clock) Clock source ********************* 1/2, 1/8 of system clock frequency; 1/1, 1/4, 1/16, 1/64, 1/128 of OSC oscillation clock frequency; 1/1 of XI oscillation clock frequency; external clock input Interrupt source ***************** coincidence with compare register 3 Timer counter 2, 3 can be cascade-connected. Timer counter 6 : 8-bit freerun timer Clock source ********************* 1/1 of system clock frequency; 1/1, 1/128, 1/8192 of OSC oscillation clock frequency; 1/1, 1/128, 1/8192 of XI oscillation clock frequency Interrupt source ***************** coincidence with compare register 6 Timer counter 7 : 16-bit x 1 (square-wave output, 16-bit PWM output (cycle / duty continuous variable), event count, synchronous output event, pulse width measurement, input capture, real time output control, high performance IGBT output) (square-wave/ PWM output to large current terminal P51 possible) Clock source ********************* 1/1, 1/2, 1/4, 1/16 of system clock frequency; 1/1, 1/2, 1/4, 1/16 of OSC oscillation clock frequency; 1/1, 1/2, 1/4, 1/16 of external clock input frequency Interrupt source ***************** coincidence with compare register 7 (2 lines), input capture register MAD00059AEM Interrupts Timer Counter 162 www..com MN101C79A Timer Counter (Continue) Timer counter 8: 16 bit x 1 (square-wave/16-bit PWM output [duty continuous variable], event count, pulse width measurement, input capture) (square-wave/PWM output to large current terminal P53 possible) Clock source ********************* 1/1, 1/2, 1/4, 1/16 of system clock frequency; 1/1, 1/2, 1/4, 1/16 of OSC oscillation clock frequency; 1/1, 1/2, 1/4, 1/16 of external clock input frequency Interrupt source ***************** coincidence with compare register 8 (2 lines), input capture register Timer counters 7, 8 can be cascade-connected. (square-wave output, PWM input capture, pluse width measurement is possible as a 32-bit timer.) Time base timer (one-minute count setting) Clock source ********************* 1/1 of OSC oscillation clock frequency; 1/1 of XI oscillation clock frequency Interrupt source ***************** 1/128, 1/256, 1/512, 1/1024, 1/8192, 1/32768, of clock source frequency Watchdog timer Interrupt source ***************** 1/65536, 1/262144, 1/1048576 of system clock frequency Serial Interface Serial 0 : synchronous type/UART (full-duplex) x 1 Clock source ********************* 1/2, 1/4 of system clock frequency; pulse output of timer counter 1 or 2; 1/2, 1/4, 1/16, 1/64 of OSC oscillation clock frequency, external clock Serial 1 : synchronous type/UART (full-duplex) x 1 Clock source ********************* 1/2, 1/4 of system clock frequency; pulse output of timer counter 1 or 2; 1/2, 1/4, 1/16, 1/64 of OSC oscillation clock frequency, external clock Serial 3 : synchronous type/single-master I2C x 1 Clock source ********************* 1/2, 1/4 of system clock frequency; pulse output of timer counter 2 or 3; 1/2, 1/4, 1/16, 1/32 of OSC oscillation clock frequency, external clock Serial 4 : I2C slave x 1 Applicable for I2C high-speed transfer mode, 7bit/10bit address setting, general call I/O Pins A/D Inputs LCD Special Ports I/O 35 * Common use * Specified pull-up resistor available * Input/output selectable (bit unit) 10-bit x 4-ch. (with S/H) 12 segments x 4 commons (static, 1/2, 1/3, or 1/4 duty) (usable if VLCD VDD) Buzzer output, remote control carrier signal output, high-current drive port Electrical Characteristics Supply current Limit Parameter Symbol IDD1 Operating supply current IDD2 IDD3 Supply current at HALT IDD4 IDD5 Supply current at STOP IDD6 Condition min fosc = 4.25 MHz (fs = fosc / 2), VDD = 3 V fx = 32 kHz (fs = fx / 2), VDD = 3 V fx = 32 kHz, VDD = 3 V, Ta = 25C fx = 32 kHz, VDD = 3 V, Ta = -40C to +85C VDD = 3 V, Ta = 25C VDD = 3 V, Ta = -40C to +85C ( typ max mA A A A A A 0.6(1.3) 1.1(2.2) 4(46) 2(3) 15(90) 5(13) 10(40) 2(3) 8(30) Unit ) : Flash memory built-in type See the next page for pin assignment and support tool. MAD00059AEM 163 www..com Pin Assignment SEG10/P15/TM0OB/TXD1A/SBO1A SEG9/P16/TM2IO/RXD1A/SBI1A NBUZZER/P13/TM7IO/CLKOUT SEG11/P14/TM0IO/RMOUT SEG8/P17/SBT1A/TM2OB SEG6/P71/KEY1/TM2IO SEG7/P70/KEY0/TM1IO BUZZER/P12/TM8IO SEG4/P73/KEY3 SEG5/P72/KEY2 33 32 31 30 29 28 27 26 25 24 SEG3/P74/KEY4 SEG2/P75/KEY5/TXD0B/SBO0B SEG1/P76/KEY6/RXD0B/SBI0B/SDA4B SEG0/P77/KEY7/SBT0B/SCL4B COM0/P30 COM1/P31/SBI3 COM2/P32/SBT3/SCL3 COM3/P33/SBO3/SDA3 P34/LVC3 P35/VLC2 P36/VLC1 34 35 36 37 38 39 40 41 42 43 44 10 11 1 2 3 4 5 6 7 8 9 23 22 21 20 19 18 P56/IRQ2 P55/IRQ1/ACZ1 P54/IRQ0/ACZ0 VDD/VPP PA3/AN3 SBT0A/PA2/AN2 RXD0A/SBI0A/PA1/AN1 TXD0A/SBO0A/PA0/AN0 Vref+ P11/SCL4A P10/SDA4A NRST/P27 MN101C79A 17 16 15 14 13 12 TM0OA/LED0/P50 TM2OA/LED2/P52 TM7O/LED1/P51 TM8O/LED3/P53 XI/P90 OSC2 OSC1 QFN044-P-0606A *Lead-free Support Tool In-circuit Emulator Flash Memory Built-in Type PX-ICE101C / D + PX-PRB101C78-TQFP048-P-0707B-M Type ROM (x 8-bit) RAM (x 8-bit) Minimum instruction execution time MN101CF79A 32 K 1.5 K 0.118 s (at 3.0 V to 3.6 V, 8.5 MHz) 0.125 s (at 2.7 V to 3.6 V, 8.0 MHz) 0.500 s (at 2.2 V to 3.6 V, 2.0 MHz) 62.5 s (at 2.2 V to 3.6 V, 32 kHz) Package QFN044-P-0606A *Lead-free MMOD VDD VSS XO MAD00059AEM 164 www..com MN101C79A MAD00059AEM 165 www..com MN101C84A Type ROM (x 8-bit) x RAM (x 8-bit) x Package Minimum Instruction Execution Time MN101C84A 32K 1K LQFP064-P-1414 *Lead-free 0.1 s (at 4.5 V to 5.5 V, 20 MHz) 0.25 s (at 2.7 V to 5.5 V, 8 MHz) 62.5 s (at 2.0 V to 5.5 V, 32 kHz) * * The lower limit for operation guarantee for flash memory built-in type is 2.5 V. * RESET * Watchdog * External 0 * External 1 * External 2 * External 4 (key interrupt dedicated) * Timer 0 * Timer 1 * Timer 2 * Timer 3 * Timer 6 * Time base * Timer 7 (2 systems) * Timer 8 (2 systems) * Serial 0 (2 systems) * A/D conversion finish Timer counter 0: 8-bit x 1 (square-wave/8-bit PWM output, event count, generation of remote control carrier, simple pulse width measurement) (square-wave/PWM output to large current terminal P50 possible) Clock source ********************* 1/2, 1/4 of system clock frequency; 1/1, 1/4, 1/16, 1/32, 1/64, 1/128, 1/256, 1/512 of OSC oscillation clock frequency; 1/1 of XI oscillation clock frequency; external clock input Interrupt source ***************** coincidence with compare register 0 Timer counter 1: 8-bit x 1 (square-wave output, event count, synchronous output event) Clock source ********************* 1/2, 1/8 of system clock frequency; 1/1, 1/4, 1/16, 1/213, 1/215, 1/32, 1/64, 1/128, 1/256 of OSC oscillation clock frequency; 1/1 of XI oscillation clock frequency; external clock input Interrupt source ***************** coincidence with compare register 1 Timer counter 0, 1 can be cascade-connected. Timer counter 2: 8-bit x 1 (square-wave output, additional pulse type 10-bit PWM output, event count, synchronous output event, simple pulse width measurement) (square-wave/PWM output to large current terminal P52 possible) Clock source ********************* 1/2, 1/4 of system clock frequency; 1/1, 1/4, 1/16, 1/32, 1/64, 1/128, 1/256, 1/512 of OSC oscillation clock frequency; 1/1 of XI oscillation clock frequency; external clock input Interrupt source ***************** coincidence with compare register 2 Timer counter 3: 8-bit x 1 (square-wave output, event count, generation of remote control carrier, serial 0 baud rate timer) Clock source ********************* 1/2, 1/8 of system clock frequency; 1/1, 1/4, 1/16, 1/64, 1/128, 1/256, 1/512 of OSC oscillation clock frequency; 1/1 of XI oscillation clock frequency; external clock input Interrupt source ***************** coincidence with compare register 3 Timer counter 2, 3 can be cascade-connected. Timer counter 6: 8-bit freerun timer Clock source ********************* 1/1 of system clock frequency; 1/1, 1/212, 1/213 of OSC oscillation clock frequency; 1/1, 1/212, 1/213 of XI oscillation clock frequency Interrupt source ***************** coincidence with compare register 6 Timer counter 7: 16-bit x 1 (square-wave output, IGBT/16-bit PWM output (cycle / duty continuous variable), event count, synchronous output evevt, pulse width measurement, input capture) (square-wave/PWM output to large current terminal P51 possible) Clock source ********************* 1/1, 1/2, 1/4, 1/16 of system clock frequency; 1/1, 1/2, 1/4, 1/16 of OSC oscillation clock frequency; 1/1, 1/2, 1/4, 1/16 of external clock input frequency Interrupt source ***************** coincidence with compare register 7 (2 lines) Timer counter 8: 16 bit x 1 (square-wave/16-bit PWM output [duty continuous variable], event count, pulse width measurement, input capture) (square-wave/PWM output to large current terminal P53 possible) MAD00049CEM Interrupts Timer Counter 166 www..com MN101C84A Timer Counter (Continue) Clock source ********************* 1/1, 1/2, 1/4, 1/16 of system clock frequency; 1/1, 1/2, 1/4, 1/16 of OSC oscillation clock frequency; 1/1, 1/2, 1/4, 1/16 of external clock input frequency Interrupt source ***************** coincidence with compare register 8 (2 lines) Timer counters 7, 8 can be cascade-connected. (square-wave output, PWM, input capture, pulse width measurement is possible as a 32-bit timer.) Time base timer (one-minute count setting) Clock source ********************* 1/1 of OSC oscillation clock frequency; 1/1 of XI oscillation clock frequency Interrupt source ***************** 1/128, 1/256, 1/512, 1/210, 1/213, 1/215 of clock source frequency Watchdog timer Interrupt source ***************** 1/65536, 1/262144, 1/1048576 of system clock frequency Serial Interface Serial 0: synchronous type/UART (full-duplex) x 1 Clock source ********************* 1/2, 1/4 of system clock frequency; pulse output of timer counter 3; 1/2, 1/4, 1/16, 1/64 of OSC oscillation clock frequency I/O Pins A/D Inputs LCD I/O Input 53 3 * Common use * Specified pull-up resistor available * Input/output selectable (bit unit) * Common use * Specified pull-up resistor available 10-bit x 8-ch. (with S/H) 32 segments x 4 commons (static, 1/2, 1/3, or 1/4 duty) LCD power supply separated from VDD (usable if VLCD VDD 5.5 V) LCD power shunt resistance contained Buzzer output, remote control carrier signal output, high-current drive port Special Ports Electrical Characteristics Supply current Limit Parameter Symbol IDD1 Operating supply current IDD2 IDD3 IDD4 Supply current at HALT IDD5 IDD6 Supply current at STOP IDD7 Condition min fosc = 20 MHz, VDD = 5 V fosc = 8 MHz, VDD = 5 V fx = 32 kHz, VDD = 3 V fx = 32 kHz, VDD = 3 V, Ta = 25C fx = 32 kHz, VDD = 3 V, Ta = -40C to +85C VDD = 5 V, Ta = 25C VDD = 5 V, Ta = -40C to +85C typ 15 8 30 4 max 30 16 60 8 30 2 50 mA mA A A A A A Unit MAD00049CEM 167 www..com Pin Assignment P60/SEG23/KEY0/SBO0B/TXDB/SD00 P61/SEG22/KEY1/SBI0B/RXDB/SD01 P62/SEG21/KEY2/SBT0B/SD02 P21/SEG25/IRQ1A/ACZ1 35 P67/SEG16/KEY7/SD07 P66/SEG17/KEY6/SD06 P65/SEG18/KEY5/SD05 P64/SEG19/KEY4/SD04 P63/SEG20/KEY3/SD03 48 47 46 45 44 43 42 41 40 39 38 37 36 34 P74/SEG11 P75/SEG10 P76/SEG9 P77/SEG8 P80/SEG7 P81/SEG6 P82/SEG5 P83/SEG4 P84/SEG3 P85/SEG2 P86/SEG1 P87/SEG0 P30/COM0 P31/COM1 P32/COM2 P33/COM3 33 P15/SEG27/TM8IOA P22/SEG24/IRQ2A P20/SEG26/IRQ0A P73/SEG12 P72/SEG13 P71/SEG14 P70/SEG15 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 32 31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 TM7IOA/SEG28/P14 TM3IO/SEG29//P13 TM2IOA/SEG30/P12 TM1IO/SEG31/P11 RMOUT/TM0IOA/P10 AN7/BUZZER/P06 AN6/SBT0A/P02 AN5/RXDA/SBI0A/P01 AN4/TXDA/SBO0A/P00 VDD AN3/PA3 IRQ2B/AN2/PA2 IRQ1B/AN1/PA1 IRQ0B/AN0/PA0 P96/Vref+ NRST/P27 MN101C84A 10 11 12 13 14 P94/XI 15 XO RMOUTB/TM0IOB/LED0/P50 P93 VLC1/P90 VLC2/P91 VLC3/P92 MMOD TM7IOB/LED1/P51 TM2IOB/LED2/P52 TM8IOB/LED3/P53 VSS OSC2 OSC1 ATRST LQFP064-P-1414 *Lead-free Support Tool In-circuit Emulator Flash Memory Built-in Type PX-ICE101C / D + PX-PRB101C84-LQFP064-P-1414-M Type ROM (x 8-bit) RAM (x 8-bit) Minimum instruction execution time MN101CF84D 64 K 2K 0.1 s (at 4.5 V to 5.5 V, 20 MHz) 0.25 s (at 2.7 V to 5.5 V, 8 MHz) 62.5 s (at 2.5 V to 5.5 V, 32 kHz) Package LQFP064-P-1414 *Lead-free VDD 16 1 2 3 4 5 6 7 8 9 MAD00049CEM 168 |
Price & Availability of MN101E04G
 |
|
|
|
|
All Rights Reserved © IC-ON-LINE 2003 - 2022 |
| [Add Bookmark] [Contact Us] [Link exchange] [Privacy policy] |
|
Mirror Sites : [www.datasheet.hk]
[www.maxim4u.com] [www.ic-on-line.cn]
[www.ic-on-line.com] [www.ic-on-line.net]
[www.alldatasheet.com.cn]
[www.gdcy.com]
[www.gdcy.net] |