|
If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
Datasheet File OCR Text: |
IFX1050G High Speed CAN-Transceiver Data Sheet Rev. 1.0, 2009-05-14 Standard Products IFX1050G Table of Contents Table of Contents 1 2 3 3.1 3.2 4 4.1 4.2 4.3 5 5.1 5.2 5.3 6 7 7.1 8 9 Overview . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 Block Diagram . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 Pin Configuration . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5 Pin Assignment . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5 Pin Definitions and Functions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5 Operation Modes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Normal Mode . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Stand - By Mode . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Receive - Only Mode . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Electrical Characteristics . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Absolute Maximum Ratings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Functional Range . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Thermal Resistance . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6 6 6 6 7 7 7 7 Electrical Characteristics . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8 Application Information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12 Further Application Information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12 Package Outlines . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13 Revision History . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14 Data Sheet 2 Rev. 1.0, 2009-05-14 High Speed CAN-Transceiver IFX1050G 1 Features * * * * * * * * Overview CAN data transmission rates from 1 kBaud up to 1 MBaud Receive - Only Mode and Stand - By Mode Optimized Electromagnetic Compatibility (EMC) Optimized for a high immunity against Electromagnetic Interference (EMI) Bus pins are short circuit proof Over - temperature protection Very wide temperature range (-40 C up to 125 C) Green Product (RoHS compliant) PG-DSO-8 Description The IFX1050G is optimized for high speed differential mode data transmission in industrial applications and it is compliant to ISO11898-2. The transceiver IFX1050G works as an interface between the CAN protocol controller and the physical differential bus in High Speed CAN applications. It supports data transmission rates from 1 kBaud up to 1 MBaud. The IFX1050G has three different operation modes: The Normal Mode, the Receive - Only Mode and the Stand - By Mode. The mode selection is controlled by the logical input pins RM and INH. The IC is based on the Smart Power Technology SPT(R) which allows bipolar and CMOS control circuitry in accordance with DMOS power devices existing on the same monolithic circuit. The IFX1050G is designed to withstand the severe conditions in industrial applications and provides excellent EMC performance within a broad frequency range. Type IFX1050G Data Sheet Package PG-DSO-8 3 Marking IFX1050G Rev. 1.0, 2009-05-14 IFX1050G Block Diagram 2 Block Diagram Figure 1 Block Diagram Data Sheet 4 Rev. 1.0, 2009-05-14 IFX1050G Pin Configuration 3 3.1 Pin Configuration Pin Assignment Figure 2 Pin Configuration 3.2 Pin 1 2 3 4 Pin Definitions and Functions Symbol TxD GND VCC Function CAN transmit data input; 20 k pull - up, "LOW" in dominant state Ground 5 V Supply input CAN receive data output; "LOW" in dominant state, integrated pull - up Receive - Only input; control input, integrated 20 k pull - up, "LOW" to activate Receive - Only Mode Low line I/O; "LOW" in dominant state High line I/O; "HIGH" in dominant state Inhibit Input; control input, 20 k pull - up, "LOW" to activate Normal Mode RxD 5 RM 6 7 8 CANL CANH INH Data Sheet 5 Rev. 1.0, 2009-05-14 IFX1050G Operation Modes 4 Operation Modes INH = 1 INH = 0 and RM = 1 Normal Mode INH = 0 RM = 1 RM = 0 RM = 1 Stand-by Mode INH = 1 RM = 0 / 1 INH = 0 and RM = 0 INH = 1 Receive-only Mode INH = 0 RM = 0 AED02924 Figure 3 Mode State Diagram The IFX1050G is equipped with three different operation modes. 4.1 Normal Mode In the Normal Mode the device is able to receive data from the CAN bus and to transmit messages to the CAN bus. The IFX1050G enters Normal Mode by setting the INH input to logical "LOW" and the RM input to logical "HIGH" (see Figure 3). 4.2 Stand - By Mode Stand - By Mode is a Low - Power mode with reduced current consumption on the power supply VCC. In Stand - By Mode the receiver and the transceiver of the IFX1050G are disabled and the device can not receive any data from the CAN bus, nor transmit any data to the CAN bus. The IFX1050G enters Stand - By Mode by setting the INH input to logical "HIGH" (see Figure 3). When the Stand - By mode is not used the INH pin has to be connected to GND in order to switch the IFX1050G permanently into Normal Mode. 4.3 Receive - Only Mode The Receive - Only Mode can be used for diagnostic purposes (to check the bus connections between the nodes) as well as to prevent the bus being blocked by a faulty permanent dominant TxD input signal. In Receive - Only Mode the output stage of the transceiver IFX1050G is disabled. The IFX1050G can not send any data to the CAN bus, but is still able to receive data from the CAN bus. The IFX1050G enters Receive - Only Mode by setting the RM input and the INH input to logical "LOW" (see Figure 3). In case the Receive - Only Mode is not used, the RM pin can be left open or it can be also connected to the power supply VCC. Data Sheet 6 Rev. 1.0, 2009-05-14 IFX1050G Electrical Characteristics 5 5.1 Table 1 Parameter Voltages Electrical Characteristics Absolute Maximum Ratings Absolute Maximum Ratings Symbol Limit Values Min. Max. 6.5 40 V V V kV kV - - 0 V < VCC < 5.5 V human body model (100 pF via 1.5 k) human body model (100 pF via 1.5 k) - Unit Remarks Supply voltage CAN input voltage (CANH, CANL) Logic voltages at INH, RM, TxD, RxD Electrostatic discharge voltage at CANH, CANL Electrostatic discharge voltage Temperatures Junction temperature VCC VCANH/L VI VESD VESD -0.3 -40 -0.3 -6 -2 VCC 6 2 Tj -40 160 C Note: Stresses above the ones listed here may cause permanent damage to the device. Exposure to absolute maximum rating conditions for extended periods may affect device reliability. Note: Integrated protection functions are designed to prevent IC destruction under fault conditions described in the data sheet. Fault conditions are considered as "outside" normal operating range. Protection functions are not designed for continuous repetitive operation. 5.2 Table 2 Parameter Functional Range Functional Range Symbol Limit Values Min. Max. 5.5 125 200 V C C - - 10 C hysteresis 4.5 -40 160 Unit Remarks Supply voltage Junction temperature Thermal shutdown temperature VCC Tj TjsD Thermal Shutdown (junction temperature) Note: Within the functional or operating range, the IC operates as described in the circuit description. The electrical characteristics are specified within the conditions given in the Electrical Characteristics table. 5.3 Pos. 5.3.1 Thermal Resistance Parameter Junction to Ambient1) Symbol Min. Limit Values Typ. - Max. 185 K/W - Unit Conditions RthJA 1) Not subject to production test, specified by design. Data Sheet 7 Rev. 1.0, 2009-05-14 IFX1050G Electrical Characteristics 6 Table 3 Electrical Characteristics Electrical Characteristics 4.5 V < VCC < 5.5 V; RL = 60 ; VINH < VINH,ON; -40 C < Tj < 125 C; all voltages with respect to ground; positive current flowing into pin; unless otherwise specified. Parameter Current Consumption Current consumption Current consumption Current consumption Current consumption Receiver Output RxD HIGH level output current LOW level output current Transmission Input TxD HIGH level input voltage threshold LOW level input voltage threshold TxD pull-up resistance Inhibit Input (pin INH) HIGH level input voltage threshold LOW level input voltage threshold INH pull-up resistance Receive only Input (pin RM) HIGH level input voltage threshold LOW level input voltage threshold RM pull-up resistance Symbol Limit Values Min. Typ. 6 45 6 1 Max. 10 70 10 10 mA mA mA A Recessive state; VTxD = VCC Dominant state; VTxD = 0 V Receive - Only Mode; RM = "LOW" Stand - By Mode; TxD = RM = "High" Unit Remarks ICC ICC ICC ICC,stb - - - - IRD,H IRD,L - 2 -4 4 -2 - mA mA VRD = 0.8 x VCC, Vdiff < 0.4 V1) VRD = 0.2 x VCC, Vdiff > 1 V1) Recessive state Dominant state - Stand - By Mode; Normal Mode - Normal Mode Receive - Only Mode - VTD,H VTD,L RTD VINH,H VINH,L RINH VRM,H VRM,L RRM - 0.3 x 0.5 x VCC VCC 0.7 x V V k V V k V V k VCC - 50 VCC 10 - 0.4 x 25 0.5 x VCC VCC 0.7 x VCC - 50 0.3 x VCC 10 - 0.4 x 25 0.5 x VCC VCC 0.7 x VCC - 50 0.3 x VCC 10 0.4 x 25 Data Sheet 8 Rev. 1.0, 2009-05-14 IFX1050G Electrical Characteristics Table 3 Electrical Characteristics (cont'd) 4.5 V < VCC < 5.5 V; RL = 60 ; VINH < VINH,ON; -40 C < Tj < 125 C; all voltages with respect to ground; positive current flowing into pin; unless otherwise specified. Parameter Bus Receiver Differential receiver threshold voltage, recessive to dominant edge Differential receiver threshold voltage dominant to recessive edge Common Mode Range Differential receiver hysteresis CANH, CANL input resistance Differential input resistance Bus Transmitter CANL/CANH recessive output voltage CANH, CANL recessive output voltage difference Vdiff = VCANH - VCANL, no load CANL dominant output voltage CANH dominant output voltage CANH, CANL dominant output voltage difference Vdiff = VCANH - VCANL CANL short circuit current CANH short circuit current Output current CANH / CANL Symbol Limit Values Min. Typ. 0.75 0.60 - 150 20 40 - - Max. 0.90 - 12 - 30 60 0.6 x V V V mV k k V V -7 V < (VCANH, VCANL) < 12 V Vdiff = VCANH - VCANL -7 V < (VCANH, VCANL) < 12 V Vdiff = VCANH - VCANL VCC = 5 V - Recessive state Recessive state Unit Remarks Vdiff,d Vdiff,r CMR - 0.50 -7 - 10 20 0.4 x Vdiff,hys Ri Rdiff VCANL/H Vdiff VCC -1 VCC VTxD = VCC VTxD = VCC 0.05 VCANL VCANH Vdiff - 2.8 1.5 - - - 2.0 - 3.0 V V V VTxD = 0 V; VCC = 5 V VTxD = 0 V; VCC = 5 V VTxD = 0 V; VCC = 5 V VCANLshort = 18 V VCANHshort = 0 V VCC = 0 V, VCANH = VCANL = -7 V VCC = 0 V, VCANH = VCANL = -2 V VCC = 0 V, VCANH = VCANL = 7 V VCC = 0 V, VCANH = VCANL = 2 V ICANLsc 50 ICANHsc -200 ICANH/L,lk -50 -50 120 -120 -300 -100 280 100 200 -50 -400 -150 400 150 mA mA A A A A Output current CANH / CANL ICANH/L,lk 50 50 Data Sheet 9 Rev. 1.0, 2009-05-14 IFX1050G Electrical Characteristics Table 3 Electrical Characteristics (cont'd) 4.5 V < VCC < 5.5 V; RL = 60 ; VINH < VINH,ON; -40 C < Tj < 125 C; all voltages with respect to ground; positive current flowing into pin; unless otherwise specified. Parameter Symbol Limit Values Min. Dynamic CAN-Transceiver Characteristics Propagation delay TxD-to-RxD LOW (recessive to dominant) Typ. 150 Max. 280 ns Unit Remarks td(L),TR - Propagation delay TxD-to-RxD HIGH (dominant to recessive) td(H),TR - 150 280 ns Propagation delay TxD LOW to bus dominant Propagation delay TxD HIGH to bus recessive td(L),T - 100 140 ns td(H),T - 100 140 ns Propagation delay bus dominant to RxD td(L),R LOW - 50 140 ns Propagation delay bus recessive to RxD td(H),R HIGH - 50 140 ns CL = 47 pF; RL = 60 ; VCC = 5 V; CRxD = 20 pF CL = 47 pF; RL = 60 ; VCC = 5 V; CRxD = 20 pF CL = 47 pF; RL = 60 ; VCC = 5 V CL = 47 pF; RL = 60 ; VCC = 5 V CL = 47 pF; RL = 60 ; VCC = 5 V; CRxD = 20 pF CL = 47 pF; RL = 60 ; VCC = 5 V; CRxD = 20 pF 1) Vdiff = VCANH - VCANL Data Sheet 10 Rev. 1.0, 2009-05-14 IFX1050G Electrical Characteristics INH 7 CANH TxD RM 47 pF 60 RxD 6 CANL GND 2 VCC 8 1 5 4 20 pF 3 100 nF AEA03328.VSD 5V Figure 4 Test Circuit for Dynamic Characteristics VTxD VCC(33V) GND VDIFF td(L), T td(H), T t VDIFF(d) VDIFF(r) VRxD VCC(33V) 0.7VCC(33V) 0.3VCC(33V) GND td(L), R td(H), R t td(L), TR Figure 5 Timing Diagrams for Dynamic Characteristics td(H), TR t AET02926 Data Sheet 11 Rev. 1.0, 2009-05-14 IFX1050G Application Information 7 Application Information Note: The following information is given as a hint for the implementation of the device only and shall not be regarded as a description or warranty of a certain functionality, condition or quality of the device. 120 VBat CAN Bus 7 6 1) IFX1050 RM INH CANH CANL GND 2 ESD24VS2B e. g. TLE4270 VI + 22 F 100 nF GND VQ 5V + 22 F ECU 1 RxD TxD VCC 5 8 4 1 3 100 nF 100 nF GND P IFX1050 RM INH 7 6 1) 5 8 4 1 3 100 nF 100 nF GND P CANH CANL GND 2 RxD TxD VCC ESD24VS2B e. g. TLE4270 VI + 22 F 100 nF GND VQ 5V + 22 F ECU 1 120 1) Optional Figure 6 Mode State Diagram Note: This is a very simplified example of an application circuit. The function must be verified in the real application. 7.1 * * * Further Application Information Please contact us for information regarding the Pin FMEA. Existing App. Note For further information you may contact http://www.infineon.com/ Data Sheet 12 Rev. 1.0, 2009-05-14 IFX1050G Package Outlines 8 Package Outlines 0.35 x 45 1.75 MAX. 0.175 0.07 (1.45) 4 -0.21) 0.19 +0.06 C 1.27 0.41+0.1 2) -0.06 0.2 M 0.1 A B 8x B 6 0.2 0.64 0.25 0.2 M 8 MAX. C 8x GPS01181 8 5 1 4 5 -0.2 1) Index Marking A 1) Does not include plastic or metal protrusion of 0.15 max. per side 2) Lead width can be 0.61 max. in dambar area Figure 7 PG-DSO-8 (PG-DSO-8-16) Green Product (RoHS compliant) To meet the world-wide customer requirements for environmentally friendly products and to be compliant with government regulations the device is available as a green product. Green products are RoHS-Compliant (i.e Pb-free finish on leads and suitable for Pb-free soldering according to IPC/JEDEC J-STD-020). For further information on alternative packages, please visit our website: http://www.infineon.com/packages. Data Sheet 13 Dimensions in mm Rev. 1.0, 2009-05-14 IFX1050G Revision History 9 Revision 1.0 Revision History Date 2009-05-12 Changes Initial data sheet Data Sheet 14 Rev. 1.0, 2009-05-14 Edition 2009-05-14 Published by Infineon Technologies AG 81726 Munich, Germany (c) 2009 Infineon Technologies AG All Rights Reserved. Legal Disclaimer The information given in this document shall in no event be regarded as a guarantee of conditions or characteristics. With respect to any examples or hints given herein, any typical values stated herein and/or any information regarding the application of the device, Infineon Technologies hereby disclaims any and all warranties and liabilities of any kind, including without limitation, warranties of non-infringement of intellectual property rights of any third party. Information For further information on technology, delivery terms and conditions and prices, please contact the nearest Infineon Technologies Office (www.infineon.com). Warnings Due to technical requirements, components may contain dangerous substances. For information on the types in question, please contact the nearest Infineon Technologies Office. Infineon Technologies components may be used in life-support devices or systems only with the express written approval of Infineon Technologies, if a failure of such components can reasonably be expected to cause the failure of that life-support device or system or to affect the safety or effectiveness of that device or system. Life support devices or systems are intended to be implanted in the human body or to support and/or maintain and sustain and/or protect human life. If they fail, it is reasonable to assume that the health of the user or other persons may be endangered. |
Price & Availability of IFX1050G |
|
|
All Rights Reserved © IC-ON-LINE 2003 - 2022 |
[Add Bookmark] [Contact Us] [Link exchange] [Privacy policy] |
Mirror Sites : [www.datasheet.hk]
[www.maxim4u.com] [www.ic-on-line.cn]
[www.ic-on-line.com] [www.ic-on-line.net]
[www.alldatasheet.com.cn]
[www.gdcy.com]
[www.gdcy.net] |