View G104V1-T01_4984324.PDF datasheet online --- IC-ON-LINE

Datasheet File OCR Text:

Doc. No.: Issued Date : Aug.9.2006 Model No :G104V1-T01
Appr oval
TFT LCD Approval Specification
MODEL NO.: G104V1-T01
Customer: Approved by: Note:
FOR MORE INFORMATION: AZ DISPLAYS, INC. 75 COLUMBIA, ALISO VIEJO, CA 92656 Http://www.AZDISPLAYS.com
Oy
u@
1/4f(R)O
tomy_chen(A@ /52720/54140/43150) teren_lin(LK/56910/36064)
|a
e1/4
2006-08-15 11:53:32 Approve by Dept. CST Mgr.(QA RA) 2006-08-10 18:17:48 CST Approve by Director
Assignee Accept
Director
Accept
1 / 26
Version 2.1
Doc. No.: Issued Date : Aug.9.2006 Model No :G104V1-T01
Approval
- CONTENTS REVISION HISTORY 1. GENERAL DESCRIPTION
1.1 OVERVIEW 1.2 FEATURES 1.3 APPLICATION 1.4 GENERAL SPECIFICATIONS 1.5 MECHANICAL SPECIFICATIONS -------------------------------------------------------------------------------------------------------------
3 4
2. ABSOLUTE MAXIMUM RATINGS
2.1 ABSOLUTE RATINGS OF ENVIRONMENT 2.2 ELECTRICAL ABSOLUTE RATINGS 2.2.1 TFT LCD MODULE 2.2.2 BACKLIGHT UNIT
-------------------------------------------------------
6
3. ELECTRICAL CHARACTERISTICS
3.1 TFT LCD MODULE 3.2 BACKLIGHT UNIT
-------------------------------------------------------
8
4. BLOCK DIAGRAM
4.1 TFT LCD MODULE 4.2 BACKLIGHT UNIT
-------------------------------------------------------
12
5. INPUT TERMINAL PIN ASSIGNMENT
5.1 TFT LCD MODULE 5.2 SCANNING DIRECTION 5.3 BACKLIGHT UNIT 5.4 COLOR DATA INPUT ASSIGNMENT
-------------------------------------------------------
13
6. INTERFACE TIMING
6.1 INPUT SIGNAL TIMING SPECIFICATIONS 6.2 POWER ON/OFF SEQUENCE
-------------------------------------------------------
16
7. OPTICAL CHARACTERISTICS
7.1 TEST CONDITIONS 7.2 OPTICAL SPECIFICATIONS
-------------------------------------------------------
18
8. PACKAGING
8.1 PACKING SPECIFICATIONS 8.2 PACKING METHOD
-------------------------------------------------------
21
9. DEFINTION OF LABELS 10. PRECATIONS
10.1 ASSEMBLY AND HANDLING PRECAUTIONS 10.2 SAFETY PRECAUTIONS
--------------------------------------------------------------------------------------------------------------
23 24
11. MODULE DRAWING
--------------------------------------------------------
25
2 / 26
Version 2.1
Doc. No.: Issued Date : Aug.9.2006 Model No :G104V1-T01
Approval
REVISION HISTORY
Version Ver 2.0 Date Nov.07. 05 Section All Description
G104V1-T01 Specifications was first issued.
ABSOLUTE RATINGS OF ENVIRONMENT 1.Change the Operation Temp.
Ver 2.1
Aug.09 . 06
2.1
3 / 26
Version 2.1
Doc. No.: Issued Date : Aug.9.2006 Model No :G104V1-T01
Approval
1. GENERAL DESCRIPTION
1.1 OVERVIEW
G104V1-T01 is an 10.4 inch TFT Liquid Crystal Display module with a 2-CCFL Backlight unit and a-31-pin-and-1ch-TTL interface. This module supports 640 x 480 VGA mode and can display 262,144 colors. The inverter module for Backlight is not built in.
1.2 FEATURES
- Wide viewing angle. - High contrast ratio - Fast response time - High color saturation - VGA (640 x 480 pixels) resolution - Wide operating temperature - DE (Data Enable) mode - CMOS/TTL (Transistor -Transistor Logic) Interface - Reversible - scan function
1.3 APPLICATION
-TFT LCD Monitor -TFT LCD TV - Factory Application - Amusement - Vehicle
1.4 GENERAL SPECIFICATI0NS
Item Diagonal Size Active Area Bezel Opening Area Driver Element Pixel Number Pixel Pitch Pixel Arrangement Display Colors Display Mode Surface Treatment Weight Specification 264.0 (10.4 inch ) 211.2x158.4 215.4x161.8 a-si TFT active matrix 640xR.G.B.x480 0.33x0.33 RGB vertical stripe 262,144 Normally Black Hard Coating (3H), AG (Haze 25%) 470 Unit mm mm mm pixel mm color g Note (1) -
Note (1) Please refer to the attached drawings for more information of front and back outline dimensions.
4 / 26
Version 2.1
Doc. No.: Issued Date : Aug.9.2006 Model No :G104V1-T01
Approval
1.5 MECHANICAL SPECIFICATIONS
Item Horizontal(H) Module Size Vertical(V) Depth(D) I/F connector mounting position Min. Typ. Max. 225.0 225.5 226.0 175.8 176.3 176.8 9.5 10.0 The mounting inclination of the connector makes the screen center within 0.5mm as the horizontal. Unit mm mm mm Note (1)
(2)
Note (1) Please refer to the attached drawings for more information of front and back outline dimensions. Note (2) Connector mounting position
+/- 0.5mm
5 / 26
Version 2.1
Doc. No.: Issued Date : Aug.9.2006 Model No :G104V1-T01
Approval
2. ABSOLUTE MAXIMUM RATINGS
2.1 ABSOLUTE RATINGS OF ENVIRONMENT
No. 1 2 3 4 5 6 7 8 9 10 Test Item High Temperature Storage Test Low Temperature Storage Test Thermal Shock Storage Test High Temperature Operation Test Low Temperature Operation Test 80J , 240 hours -20J , 240 hours -20J , 0.5houro/ 70J , 240 hours -20J , 240 hours 80J , 0.5hour; 100cycles, 1hour/cycle (1) (2) Test Condition Note
High Temperature & High Humidity 60J , RH 90%, 240hours Operation Test Heat Cycle Operation Test ESD Test (Operation) Shock (Non-Operating) Vibration (Non-Operating) -20J , 1houro/ 70J , 1hour; 50cycles, 4hour/cycle
150pF, 330[ , 1sec/cycle Condition 1 : panel contact, O 8KV Condition 2 : panel non-contact O 15KV 220G, 2ms, half sine wave, 1 time for X, Y, Z. 1.5G, 10 ~ 300 Hz, 10min/cycle, 3 cycles each X, Y, Z
(2) (2)(3) (2)(3)
Note (1) Temperature and relative humidity range is shown in the figure below. (a) 90 %RH Max. (Ta O 40 C).
(b) Wet-bulb temperature should be 39 C Max. (Ta > 40 C). (c) No condensation. Note (2) No display malfunctions. Note (3) At testing Vibration and Shock, the fixture in holding the module has to be hard and rigid enough so that the module would not be twisted or bent by the fixture. Note (4) The temperature of panel display surface area should be 80 C Max.
6 / 26
Version 2.1
Doc. No.: Issued Date : Aug.9.2006 Model No :G104V1-T01
Approval
Relative Humidity (%RH)
100 90 80
60
Operating Range
40
20 10
Storage Range
-40
-20
0
20
40
60
80
Temperature (C)
2.2 ELECTRICAL ABSOLUTE RATINGS 2.2.1 TFT LCD MODULE
Item Power Supply Voltage Logic Input Voltage Symbol Vcc VIN Value Min. -0.3 -0.3 Max. 6.0 VCC + 0.3 Unit V V Note (1)
2.2.2 BACKLIGHT UNIT
Item Lamp Voltage Lamp Current Lamp Frequency Symbol VL IL FL Value Min. 2.0 45 Max. 2.5K 6.0 80 Unit VRMS mARMS KHz Note (1), (2), IL = (5.5)mA (1), (2)
Note (1) Permanent damage to the device may occur if maximum values are exceeded. Function operation should be restricted to the conditions described under Normal Operating Conditions. Note (2) Specified values are for lamp (Refer to 3.2 for further IL information).
7 / 26
Version 2.1
Doc. No.: Issued Date : Aug.9.2006 Model No :G104V1-T01
Approval
3. ELECTRICAL CHARACTERISTICS
3.1 TFT LCD MODULE
Parameter Power Supply Voltage Ripple Voltage Rush Current Power Supply Current Logic input voltage White Black Vertical Stripe Symbol VCC VRP IRUSH VIH VIL Min. 3.0 0.7VCC 0 Value Typ. 3.3 / 5 Max. 5.25 100 1 VCC 0.3VCC Ta = 25 2 C Unit V mV A mA mA mA V V Note (2) (3)a (3)b (3)c
420 380 470 -
Note (1) The module should be always operated within above ranges. Note (2) Measurement Conditions: VCC = 3.3 V, Ta = 25 2 C.
Vcc Q1 2SK1475 Vcc C3 FUSE R1 47K 1uF (LCD Module Input)
(High to Low) (Control Signal) R2 SW 1K +12V
Q2 2SK1470
VR1 C1
47K
C2
0.01uF 1uF
Vcc rising time is 470s
Vcc
0.9Vcc 0.1Vcc
GND 470s
8 / 26
Version 2.1
Doc. No.: Issued Date : Aug.9.2006 Model No :G104V1-T01
Approval
Note (3) The specified power supply current is under the conditions at Vcc = 3.3 V, Ta = 25 2 C, fv = 60 Hz, whereas a power dissipation check pattern below is displayed. a. White Pattern b. Black Pattern
Active Area c. Vertical Stripe Pattern
Active Area
RGBRGB BRGBRGBR BRGBRGBR RGBRGB
Active Area
9 / 26
Version 2.1
Doc. No.: Issued Date : Aug.9.2006 Model No :G104V1-T01
Approval
3.2 BACKLIGHT UNIT
Ta = 25 2 C Parameter Lamp Input Voltage Lamp Current Lamp Turn On Voltage Operating Frequency Lamp Life Time Power Consumption Symbol VL IL VS FL LBL PL Min. 440 2.0 45 50,000 Value Typ. 490 5.5 5.39 Max. 540 6.0 770 (25oC) 960 (0oC) 80 Unit VRMS mARMS VRMS VRMS KHz Hrs W Note (1), IL = (5.5) mA (1) (2) (2) (3) (5) (4), IL = 5.5 mA
Note (1) IL means the lamp current of one lamp. Note (2) The voltage shown above should be applied to the lamp for more than 1 second after startup. Otherwise the lamp may not be turned on. Note (3) The lamp frequency may produce interference with horizontal synchronous frequency from the display, and this may cause line flow on the display. In order to avoid interference, the lamp frequency should be detached from the horizontal synchronous frequency and its harmonics as far as possible. Note (4) PL = IL N VL N 2 Note (5) The lifetime of lamp can be defined as the time in which it continues to operate under the condition Ta = 25 O 2 oC and IL = ( 5.5 ) mArms until one of the following events occurs: (a) When the brightness becomes or lower than 50% of its original value. (b) When the effective ignition length becomes or lower than 80% of its original value. (Effective ignition length is defined as an area that has less than 70% brightness compared to the brightness in the center point.) Note (6) The waveform of the voltage output of inverter must be area-symmetric and the design of the inverter must have specifications for the modularized lamp. The performance of the Backlight, such as lifetime or brightness, is greatly influenced by the characteristics of the DC-AC inverter for the lamp. All the parameters of an inverter should be carefully designed to avoid producing too much current leakage from high voltage output of the inverter. When designing or ordering the inverter please make sure that a poor lighting caused by the mismatch of the Backlight and the inverter (miss-lighting, flicker, etc.) never occurs. If the above situation is confirmed, the module should be operated in the same manners when it is installed in your instrument. The output of the inverter must have symmetrical (negative and positive) voltage waveform and symmetrical current waveform.(Unsymmetrical ratio is less than 10%) Please do not use the inverter which has unsymmetrical voltage and unsymmetrical current and spike wave. Lamp frequency may produce interface with horizontal synchronous frequency and as a result this may cause beat on the display. Therefore lamp frequency shall be as away possible from the horizontal synchronous frequency and from its harmonics in order to prevent interference. Requirements for a system inverter design, which is intended to have a better display performance, a
10 / 26
Version 2.1
Doc. No.: Issued Date : Aug.9.2006 Model No :G104V1-T01
Approval
better power efficiency and a more reliable lamp. It shall help increase the lamp lifetime and reduce its leakage current. a. The asymmetry rate of the inverter waveform should be 10% below; b. The distortion rate of the waveform should be within O 2 10%;
c. The ideal sine wave form shall be symmetric in positive and negative polarities. * Asymmetry rate:
Ip
| I p - I -p | / Irms * 100%
I -p
* Distortion rate I p (or I -p) / Irms
11 / 26
Version 2.1
Doc. No.: Issued Date : Aug.9.2006 Model No :G104V1-T01
Approval
4. BLOCK DIAGRAM
4.1 TFT LCD MODULE
DCLK HS
SCAN DRIVER IC
TTL INPUT / TIMING CONTROLLER INPUT CONNECTOR ( DF9C-31P-1V )
VS R0~R5 G0~G5 B0~B5 DE DPSR VCC GND VL
TFT LCD PANEL (640x3x480)
DATA DRIVER IC DC/DC CONVERTER & REFERENCE VOLTAGE
LAMP CONNECTOR ( BHR-03VS-1 )
BACKLIGHT UNIT
4.2 BACKLIGHT UNIT
1 LV (White)
2 HV (Pink)
3 HV (Pink)
12 / 26
Version 2.1
Doc. No.: Issued Date : Aug.9.2006 Model No :G104V1-T01
Approval
5. INPUT TERMINAL PIN ASSIGNMENT
5.1 TFT LCD MODULE
Pin 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 Name GND DCLK HS VS GND R0 R1 R2 R3 R4 R5 GND G0 G1 G2 G3 G4 G5 GND B0 B1 B2 B3 B4 B5 GND DE Vcc Vcc N.C. DPSR Description Ground Dot clock Horizontal synchronous Vertical synchronous Ground Red data (LSB) Red data Red data Red data Red data Red data (MSB) Ground Green data (LSB) Green data Green data Green data Green data Green data (MSB) Ground Blue data (LSB) Blue data Blue data Blue data Blue data Blue data (MSB) Ground Data enable signal Power supply Power supply Reserved, please keep it floating. Selection of scan direction
Note (1) Connector Part No.: DF 9C-31P-1V or equivalent.
13 / 26
Version 2.1
Doc. No.: Issued Date : Aug.9.2006 Model No :G104V1-T01
Approval
5.2 SCANNING DIRECTION The following figures are seen from a front view and the arrow shows the direction of scan.
Figure1.Normal scan (DPSR : Low or Open )
Figure 2. Reverse scan (DPSR : High )
5.3 BACKLIGHT UNIT
Pin 1 2 3 Symbol LV HV1 HV2 Description Ground High Voltage High Voltage Remark White Pink Pink
Note (1) Connector Part No.: BHR-03VS-1 ( J.S.T Mfg,Co,Ltd )
14 / 26
Version 2.1
Doc. No.: Issued Date : Aug.9.2006 Model No :G104V1-T01
Approval
5.4 COLOR DATA INPUT ASSIGNMENT
The brightness of each primary color (red, green and blue) is based on the 6-bit gray scale data input for the color. The higher the binary input, the brighter the color. The table below provides the assignment of color versus data input. Data Signal Color
R5 R4 Red R3 R2 R1 R0 G5 Green G4 G3 G2 G1 G0 B5 B4 Blue B3 B2 B1 B0
Basic Colors
Black Red Green Blue Cyan Magenta Yellow White Red(0) / Dark Red(1) Red(2) : : Red(61) Red(62) Red(63)
0 1 0 0 0 1 1 1 0 0 0 : : 1 1 1
0 1 0 0 0 1 1 1 0 0 0 : : 1 1 1
0 1 0 0 0 1 1 1 0 0 0 : : 1 1 1
0 1 0 0 0 1 1 1 0 0 0 : : 1 1 1
0 1 0 0 0 1 1 1 0 0 1 : : 0 1 1
0 1 0 0 0 1 1 1 0 1 0 : : 1 0 1
0 0 1 0 1 0 1 1 0 0 0 : : 0 0 0
0 0 1 0 1 0 1 1 0 0 0 : : 0 0 0
0 0 1 0 1 0 1 1 0 0 0 : : 0 0 0
0 0 1 0 1 0 1 1 0 0 0 : : 0 0 0
0 0 1 0 1 0 1 1 0 0 0 : : 0 0 0
0 0 1 0 1 0 1 1 0 0 0 : : 0 0 0
0 0 0 1 1 1 0 1 0 0 0 : : 0 0 0
0 0 0 1 1 1 0 1 0 0 0 : : 0 0 0
0 0 0 1 1 1 0 1 0 0 0 : : 0 0 0
0 0 0 1 1 1 0 1 0 0 0 : : 0 0 0
0 0 0 1 1 1 0 1 0 0 0 : : 0 0 0
0 0 0 1 1 1 0 1 0 0 0 : : 0 0 0
Gray Scale Of Red
Gray Scale Of Green
Green(0) / Dark Green(1) Green(2) : : Green(61) Green(62) Green(63) Blue(0) / Dark Blue(1) Blue(2) : : Blue(61) Blue(62) Blue(63)
0 0 0 : : 0 0 0 0 0 0 : : 0 0 0
0 0 0 : : 0 0 0 0 0 0 : : 0 0 0
0 0 0 : : 0 0 0 0 0 0 : : 0 0 0
0 0 0 : : 0 0 0 0 0 0 : : 0 0 0
0 0 0 : : 0 0 0 0 0 0 : : 0 0 0
0 0 0 : : 0 0 0 0 0 0 : : 0 0 0
0 0 0 : : 1 1 1 0 0 0 : : 0 0 0
0 0 0 : : 1 1 1 0 0 0 : : 0 0 0
0 0 0 : : 1 1 1 0 0 0 : : 0 0 0
0 0 0 : : 1 1 1 0 0 0 : : 0 0 0
0 0 1 : : 0 1 1 0 0 0 : : 0 0 0
0 1 0 : : 1 0 1 0 0 0 : : 0 0 0
0 0 0 : : 0 0 0 0 0 0 : : 1 1 1
0 0 0 : : 0 0 0 0 0 0 : : 1 1 1
0 0 0 : : 0 0 0 0 0 0 : : 1 1 1
0 0 0 : : 0 0 0 0 0 0 : : 1 1 1
0 0 0 : : 0 0 0 0 0 1 : : 0 1 1
0 0 0 : : 0 0 0 0 1 0 : : 1 0 1
Gray Scale Of Blue
Note (1) 0: Low Level Voltage, 1: High Level Voltage
15 / 26
Version 2.1
Doc. No.: Issued Date : Aug.9.2006 Model No :G104V1-T01
Approval
6. INTERFACE TIMING
6.1 INPUT SIGNAL TIMING SPECIFICATIONS
The input signal timing specifications are shown as the following table and timing diagram. Signal Dot Clock Dot Data Item Frequency Duty Setup Time Hold Time Frame Rate Total Display Blank Total Display Blank Symbol Fc Min. 21 0.4 8 12 640 480 Typ. 25.175 0.5 60 800 640 160 525 480 45 Max. 29 0.6 640 Tv-Tvd 480 Th-Thd Unit MHz Note -
Vertical Active Display Term
Horizontal Active Display Term
Tlvs Tlvh Fr Tv Tvd Tvb Th Thd Thb
ns ns Hz Th Th Th Tc Tc Tc
Tv=Tvd+Tvb Th=Thd+Thb -
INPUT SIGNAL TIMING DIAGRAM
Tv TVD DE TH DCLK TC DE THD
DATA
16 / 26
Version 2.1
Doc. No.: Issued Date : Aug.9.2006 Model No :G104V1-T01
Approval
6.2 POWER ON/OFF SEQUENCE To prevent a latch-up or DC operation of LCD module, the power on/off sequence should be as the diagram below.
Power On
90%
Power Off
90% t7
Restart
- Power Supply for LCD, Vcc
0V
10% t1 t4 t2 t3
10%
- Interface Signal VI
0V
t5 50%
Valid Data
t6 50%
- Power for Lamp Timing Specifications: 0.5 < t1 O 0 < t2 O 0 < t3 O t4 U t5 U t6 U 10 ms 50 ms 50 ms 500 ms 200 ms 200 ms
OFF
ON
OFF
Note (1) Please avoid floating state of interface signal at invalid period. Note (2) When the interface signal is invalid, be sure to pull down the power supply of LCD Vcc to 0 V. Note (3) The Backlight inverter power must be turned on after the power supply for the logic and the interface signal is valid. The Backlight inverter power must be turned off before the power supply for the logic and the interface signal is invalid.
17 / 26
Version 2.1
Doc. No.: Issued Date : Aug.9.2006 Model No :G104V1-T01
Approval
7. OPTICAL CHARACTERISTICS
7.1 TEST CONDITIONS
Item Ambient Temperature Ambient Humidity Supply Voltage Input Signal Lamp Current Inverter Operating Frequency Inverter Symbol Value Unit o Ta C 252 Ha %RH 5010 VCC 3.3 V According to typical value in "3. ELECTRICAL CHARACTERISTICS" IL 5.5 mARMS FL 61 KHz (Sumida IV40090T/B2)
Note (1) IL means the lamp current of one lamp.
7.2 OPTICAL SPECIFICATIONS
The relative measurement methods of optical characteristics are shown in 7.2. The following items should be measured under the test conditions described in 7.1 and stable environment shown in Note (6). Item Red Green Blue White Center Luminance of White Contrast Ratio Response Time White Variation Horizontal Viewing Angle Vertical Symbol Rx Ry Gx Gy Bx By Wx Wy LC CR TR TF W x+ xY+ Yx=0, Y =0 400 1000 80 80 80 80 Typ - 0.03 Condition Min. Typ. 0.626 0.348 0.303 0.563 0.145 0.105 0.319 0.338 450 1500 14 9 1.25 88 88 88 88 19 14 1.40 cd/m2 Ms Ms (4), (6) (2), (6) (3) (5) Typ + 0.03 Max. Unit Note
Color Chromaticity
-
(1), (6)
CR U
10
Deg.
(1),
18 / 26
Version 2.1
Doc. No.: Issued Date : Aug.9.2006 Model No :G104V1-T01
Approval
Note (1) Definition of Viewing Angle (x, y): Normal x = y = 0 yX- = 90 xx- x+ y+ 12 o'clock direction y+ y+ = 90
6 o'clock y- = 90
y-
x+
X+ = 90
Note (2)
Definition of Contrast Ratio (CR): The contrast ratio can be calculated by the following expression. Contrast Ratio (CR) = L63 / L0 L63: Luminance of gray level 63 L 0: Luminance of gray level 0 CR = CR (5) CR (X) is corresponding to the Contrast Ratio of the point X at Figure in Note (5).
Note (3)
Definition of Response Time (TR, TF) and measurement method:.
Gray Level 63 100% 90%
Gray Level 63
Optical Response Gray Level 0
10% 0%
Time TF TR
66.67ms
19 / 26
66.67ms
Version 2.1
Doc. No.: Issued Date : Aug.9.2006 Model No :G104V1-T01
Approval
Note (4) Definition of Luminance of White (LC): Measure the luminance of gray level 63 at center point LC = L (5) L (x) is corresponding to the luminance of the point X at Figure in Note (5). Note (5) Definition of White Variation (W): Measure the luminance of gray level 63 at 5 points W = Maximum [L (1), L (2), L (3), L (4), L (5)] / Minimum [L (1), L (2), L (3), L (4), L (5)]
Horizontal Line D
D/4 D/2 3D/4
Vertical Line
W/4
1
2 X
W
W/2
5
: Test Point X=1 to 5
3W/4
3
4
Active Area Note (6) Measurement Setup: The LCD module should be stabilized at given temperature for 20 minutes to avoid abrupt temperature change during measuring. In order to stabilize the luminance, the measurement should be executed after lighting Backlight for 20 minutes in a windless room.
LCD Module LCD Panel Center of the Screen Photometer CA210, CS-1000T
Field of View = 2
Light Shield Room (Ambient Luminance < 2 lux)
500 mm
20 / 26
Version 2.1
Doc. No.: Issued Date : Aug.9.2006 Model No :G104V1-T01
Approval
8. PACKAGING
8.1 PACKING SPECIFICATIONS
(1) 30 LCD modules / 1 Box (2) Box dimensions: 500(L) X 400(W) X 330(H) mm (3) Weight: approximately 15.5Kg (30 modules per box)
8.2 PACKING METHOD
(1) Carton Packing should have no failure in the following reliability test items. Test Item Vibration Test Conditions ISTA STANDARD Random, Frequency Range: 1 V 200 Hz Top & Bottom: 30 minutes (+Z), 10 min (-Z), Right & Left: 10 minutes (X) Back & Forth 10 minutes (Y) 1 Angle, 3 Edge, 6 Face, 60cm Note Non Operation
Dropping Test
Non Operation
Figure. 8-1 Packing method
21 / 26
Version 2.1
Doc. No.: Issued Date : Aug.9.2006 Model No :G104V1-T01
Approval
Figure. 8-2 Packing method
22 / 26
Version 2.1
Doc. No.: Issued Date : Aug.9.2006 Model No :G104V1-T01
Approval
9. DEFINITION OF LABELS
9.1 CMO MODULE LABEL
The barcode nameplate is pasted on each module as illustration, and its definitions are as following explanation.
CHI
MEI
E207943
G104V1 -T01 Rev. XX
MADE IN TAIWAN
OPTOELECTRONICS
MADE IN TAIWAN
XXXXXXXYMDLNNNN
(a) Model Name: G104v1
-T01
(b) Revision: Rev. XX, for example: A0, A1... B1, B2... or C1, C2...etc. (c) Serial ID: X X X X X X X Y M D L N N N N Serial No. Product Line Year, Month, Date CMO Internal Use CMO Internal Use Revision CMO Internal Use
Serial ID includes the information as below: (a) Manufactured Date: Year: 1~9, for 2000~2009 Month: 1~9, A~C, for Jan. ~ Dec. Day: 1~9, A~Y, for 1st to 31st, exclude I ,O, and U. (b) Revision Code: Cover all the change (c) Serial No.: Manufacturing sequence of product (d) Product Line: 1 -> Line1, 2 -> Line 2, ...etc.
23 / 26
Version 2.1
Doc. No.: Issued Date : Aug.9.2006 Model No :G104V1-T01
Approval
10. PRECAUTIONS
10.1 ASSEMBLY AND HANDLING PRECAUTIONS
(1) Do not apply rough force such as bending or twisting to the module during assembly. (2) To assemble or install module into user's system can be only in clean working areas. The dust and oil may cause electrical short or worsen the polarizer. (3) It's not permitted to have pressure or impulse on the module because the LCD panel and Backlight will be damaged. (4) Always follow the correct power sequence when LCD module is connecting and operating. This can prevent damage to the CMOS LSI chips during latch-up. (5) Do not pull the I/F connector in or out while the module is operating. (6) Do not disassemble the module. (7) Use a soft dry cloth without chemicals for cleaning, because the surface of polarizer is very soft and easily scratched. (8) It is dangerous that moisture come into or contacted the LCD module, because moisture may damage LCD module when it is operating. (9) High temperature or humidity may reduce the performance of module. Please store LCD module within the specified storage conditions. (10) When ambient temperature is lower than 10C may reduce the display quality. For example, the response time will become slowly, and the starting voltage of CCFL will be higher than room temperature.
10.2 SAFETY PRECAUTIONS
(1) The startup voltage of Backlight is approximately 1000 Volts. It may cause electrical shock while assembling with inverter. Do not disassemble the module or insert anything into the Backlight unit. (2) If the liquid crystal material leaks from the panel, it should be kept away from the eyes or mouth. In case of contact with hands, skin or clothes, it has to be washed away thoroughly with soap. (3) After the module's end of life, it is not harmful in case of normal operation and storage.
24 / 26
Version 2.1

▲Up To Search▲

Price & Availability of G104V1-T01

	To Download G104V1-T01 Datasheet File
If you can't view the Datasheet, Please click here to try to view without PDF Reader .