![]() |
|
If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
Datasheet File OCR Text: |
16.5~30W AC-DC Single Output and Medical Type Desktop Features : 3 pole AC inlet IEC320-C6 MES30C series Class power ( with earth pin) Full output 3~48V safety approval Protections: Short circuit / Overload / Over voltage / Over temp. Fully enclosed plastic case Fix switching frequency and regulation Topology: Top switch circuit LED indicator for power on Approvals: UL / CUL / TUV / CB / CE 2 years warranty EN 60601-1 IEC 60601-1 SPECIFICATION ORDER NO. SAFETY MODEL NO. DC VOLTAGE RATED CURRENT CURRENT RANGE RATED POWER OUTPUT MES30C-0P1J MES30C-1P1J MES30C-1-1P1J MES30C-2P1J MES30C-3P1J MES30C-4P1J MES30C-5P1J MES30C-6P1J MES30C-8P1J MES30C-0 Note.2 3.3V MES30C-1 5V 5A 0 ~ 5A 25W 30mVp-p 5.0% 1.0% 5.0% MES30C-1-1 MES30C-2 7.5V 3.33A 0 ~ 3.33A 25W 40mVp-p 4.0% 1.0% 4.0% 9V 3.33A 0 ~3.33A 30W 50mVp-p 4.0% 1.0% 4.0% MES30C-3 12V 2.5A 0 ~ 2.5A 30W 50mVp-p 3.0% 1.0% 3.0% MES30C-4 15V 2.0A 0 ~ 2.0A 30W 60mVp-p 2.0% 1.0% 2.0% MES30C-5 18V 1.66A 0 ~ 1.66A 30W 70mVp-p 2.0% 1.0% 2.0% MES30C-6 24V 1.25A 0 ~ 1.25A 30W 80mVp-p 2.0% 1.0% 2.0% MES30C-8 48V 0.62A 0 ~ 0.62A 30W 100mVp-p 2.0% 1.0% 2.0% 5A 0 ~ 5A 16.5W RIPPLE & NOISE (max.) Note.3 30mVp-p Fixed VOLTAGE ADJ. RANGE VOLTAGE TOLERANCE Note.4 8.0% LINE REGULATION LOAD REGULATION VOLTAGE RANGE FREQUENCY RANGE EFFICIENCY (Typ.) AC CURRENT INRUSH CURRENT (max.) LEAKAGE CURRENT (max.) OVERLOAD Note.5 Note.6 1.0% 8.0% SETUP, RISE, HOLD UP TIME 300ms, 50ms, 16ms at full load 90 ~ 264VAC 135 ~ 370VDC 47~63Hz 65% 35A / 230VAC 0.3mA / 240VAC 150~350% rated output power 112 ~ 250% rated output power Protection type : Hiccup mode, recovers automatically after fault condition is removed 110 ~ 140% rated output voltage Protection type : Hiccup mode, recovers automatically after fault condition is removed Tj 135 typically (IC1) detect on main control IC Protection type : Shut down o/p voltage, recovers automatically after temperature goes down 0 ~ +65 (Refer to output load derating curve) 20% ~ 90% RH non-condensing -20 ~ +85 , 10 ~ 95% RH 0.03% / ( 0 ~ 50 ) 10 ~ 500Hz, 2G 10min./1cycle, period for 60min. each along X, Y, Z axes UL2601-1, IEC601-1, EN60601-1 approved I/P-O/P: 5656VDC , I/P-FG: 2828VDC I/P-O/P, I/P-FG:100M Ohms / 500VDC / 25 Compliance to EN55011(CISPR11) class B Compliance to EN61000-3-2,3 Compliance to EN60601-1-2 (EN61000-4-2,3,4,5,6,8,11), ENV50204, light industry level, criteria A 400Khrs min. MIL-HDBK-217F (25 ) 108*67*36mm (L*W*H) 0.3kg ; 54pcs/ 20kg / CARTON Standard type P1J: 2.1 * 5.5 * 11mm, turning fork type, center positive for stock ; Other type available by customer requested SPT-2 16AWG 4FT for 3.3 ~ 7.5V ; UL1185 18AWG 6FT for 9 ~48V / 70% RH 70% 72% 74% 76% 78% 78% 80% 82% 0.8A / 100VAC INPUT PROTECTION OVER VOLTAGE OVER TEMPERATURE WORKING TEMP. WORKING HUMIDITY ENVIRONMENT STORAGE TEMP., HUMIDITY TEMP. COEFFICIENT VIBRATION SAFETY STANDARDS WITHSTAND VOLTAGE SAFETY & ISOLATION RESISTANCE EMC EMI CONDUCTION & RADIATION (Note. 7) HARMONIC CURRENT EMS IMMUNITY MTBF OTHERS DIMENSION PACKING PLUG CABLE CONNECTOR NOTE 1.All parameters are specified at 230VAC input, rated load, 25 70% RH ambient. 2.DC voltage: The output voltage set at point measure by plug terminal & 50% load. 3.Ripple & noise are measured at 20MHz by using a 12" twisted pair terminated with a 0.1uf & 47uf capacitor. 4.Tolerence: includes set up tolerance, line regulation, load regulation. 5.Line regulation is measured from low line to high line at rated load. 6.Load regulation is measured from 0% to 100% rated load. 7.The power supply is considered a component which will be installed into a final equipment. The final equipment must be re-confirmed that it still meets EMC directives. File Name:MES30C-SPEC 2008-05-08 16.5~30W AC-DC Single Output and Medical Type Desktop Mechanical Specification M S P - 2 2 5 sseerrii e s U ES30C es Unit:mm SPT-2 16AWG 4ft for 3.3V,5V,7.5V UL 1185 18AWG 6ft for others 36 36 106 100 10mm SWITCHING ADAPTOR 11 C"+" 67 POWER LED 108 ID 2.1 x OD 5.5 69.9 18 Plug Assignment Standard plug: P1J (option) 3 45 33.5 67 42 P1J P/N CENTER OUTPUT + R1 NAME PLATE RUBBER FOOTX4 Derating Curve Static Characteristics 100 100 LOAD (%) LOAD (%) 80 60 50 0 15 30 40 45 60 70 0 50 60 70 80 90 100 260 Ta ( ) INPUT VOLTAGE File Name:MES30C-SPEC 2008-05-08 |
Price & Availability of MES30C-0P1J
![]() |
|
|
All Rights Reserved © IC-ON-LINE 2003 - 2022 |
[Add Bookmark] [Contact Us] [Link exchange] [Privacy policy] |
Mirror Sites : [www.datasheet.hk]
[www.maxim4u.com] [www.ic-on-line.cn]
[www.ic-on-line.com] [www.ic-on-line.net]
[www.alldatasheet.com.cn]
[www.gdcy.com]
[www.gdcy.net] |