 |
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
| Datasheet File OCR Text: |
| PE11B Series 3.3 V PECL Clock Oscillators January 2008 * Pletronics' PE11B Series is a quartz crystal controlled precision square wave generator with an PECL output. * Solder pad compatible with many 9x14 Plastic J lead packages. * FR4 base with a mechanical metal cover. * Tape and Reel or Tube packaging is available. * * * * 10.9 to 1,100 MHZ 9.9 mm x 13.97 mm `B' package Enable/Disable Function Low Jitter This series, PE11B, is not recommended for new designs. Use PE93 or PE99 series for new designs, these are not pin/pad compatible . Pletronics Inc. certifies this device is in accordance with the RoHS 6/6 (2002/95/EC) and WEEE (2002/96/EC) directives. Pletronics Inc. guarantees the device does not contain the following: Cadmium, Hexavalent Chromium, Lead, Mercury, PBB's, PBDE's Weight of the Device: 1.34 or .66 grams Moisture Sensitivity Level: 1 As defined in J-STD-020C Second Level Interconnect code: e4 Absolute Maximum Ratings: Parameter VCC Supply Voltage Vi Vo Input Voltage Output Voltage Unit -0.5V to +6.5V -0.5V to VCC + 0.5V -0.5V to VCC + 0.5V Thermal Characteristics The maximum die or junction temperature is 155oC The thermal resistance junction to board is 60 to 100oC/Watt depending on the solder pads, ground plane and construction of the PCB. Product information is current as of publication date. The product conforms Copyright (c) 2007, 2008 Pletronics Inc. to specifications per the terms of the Pletronics standard warranty. Production processsing does not necessarily include testing of all parameters. PE11B Series 3.3 V PECL Clock Oscillators January 2008 Part Number: PE11 45 B E V -125.0M -XX Packaging code or blank T250 = 250 per Tape and Reel T500 = 500 per Tape and Reel T1K = 1000 per Tape and Reel Frequency in MHz Part Marking: PLE PE99 FFFFFM C YMDXX -orPLE PE11B FFFFFM C YMDXX -orPLE PE11B FFFFFM C YMDXX -orPE11BX FFFFFM PLE XX C YYWWXX -orPE11BX FFFFFM PLE XX C YYWWXX Supply Voltage VCC V = 3.3V _ 10% + Optional Enhanced OTR E = Temperature range -40 to 85oC Series Model Frequency Stability 45 = _ 50 ppm + 44 = _ 25 ppm + 20 = _ 20 ppm + Series Model Legend: PLE = Pletronics FFFFFM = Frequency in MHz YMD or YYWW = Date of Manufacture (Year - month - day or year and week) All other marking is internal factory codes. External packaging labels and packing list will correctly identify the ordered Pletronics part number. Codes for Date Code YMD Code Year Code Month Code Day Code Day Code Day 1 1 D 13 T 25 6 2006 A JAN 2 2 E 14 U 26 7 2007 B FEB 3 3 F 15 V 27 8 2008 C MAR 4 4 G 16 W 28 9 2009 D APR E MAY 5 5 H 17 X 29 0 2010 F JUN 6 6 J 18 Y 30 1 2011 G JUL 7 7 K 19 Z 31 H AUG 8 8 L 20 2 2012 J SEP 9 9 M 21 K OCT A 10 N 22 L NOV B 11 P 23 M DEC C 12 R 24 www.pletronics.com 425-776-1880 2 PE11B Series 3.3 V PECL Clock Oscillators January 2008 Electrical Specification for 3.30V _10% over the specified temperature range and + the frequency range of 10.9 MHZ to 766 MHZ and 876 MHZ to 1,175MHz Item Frequency Accuracy "45" "44" "20" Output Waveform Output High Level Min -50 -25 -20 Max +50 +25 +20 PECL / ECL Unit ppm Condition For all supply voltages, load changes, aging for 1 year, shock, vibration and temperatures 2.12 0.82 -1.18 2.49 1.19 -0.81 1.99 0.69 -1.31 53 0.6 2.8 300 90 0.8 +50 +50 10 10 5 +70 +85 +125 volts volts volts volts volts volts % pS RMS pS RMS pS mA Kohm volts volts uA uA nS nS mS o o o Referenced to Ground, VCC = 3.3 V Referenced to termination voltage, VCC = 3.3 V Referenced to Vcc, VCC = 3.3 V Referenced to Ground, VCC = 3.3 V Referenced to termination voltage, VCC = 3.3 V Referenced to Vcc, VCC = 3.3 V at 50% point of VCC (See load circuit) 12 KHz to 20 MHZ from the output frequency 10 Hz to 20 MHZ from the output frequency Vth is 20% and 80% of waveform Output Low Level 1.83 0.53 -1.47 Output Symmetry Jitter 47 - Output TRISE and TFALL VCC Supply Current (ICC) Enable/Disable Internal Pull-up V disable V enable Output leakage VOUT = VCC VOUT = 0V Enable time Disable time Start up time Operating Temperature Range 100 50 2.00 -50 -50 -10 - 40 to VCC Referenced to pad 3 Referenced to pad 3 Pad 1 low, device disabled Time for output to reach a logic state Time for output to reach a high Z state Time for output to reach specified frequency Standard Temperature Range Extended Temperature Range "E" Option C C C Storage Temperature Range -55 Specifications with E/D open circuit or connected to VCC www.pletronics.com 425-776-1880 3 PE11B Series 3.3 V PECL Clock Oscillators January 2008 Typical Phase-Noise Response 0 -20 -40 dBc/Hz -60 -80 -100 -120 -140 -160 10 1,000 100,000 10,000,000 100MHz dBc/Hz 400MHz dBc/Hz 1000MHz dBc/Hz Frequency (Hz) Load Circuit Test Waveform Symmetry Vhigh 80% 50% 20% Vlow Trise Tfall Out Out* Showing Out Measurement only www.pletronics.com 425-776-1880 4 PE11B Series 3.3 V PECL Clock Oscillators January 2008 Reliability: Environmental Compliance Parameter Mechanical Shock Vibration Solderability Thermal Shock Condition MIL-STD-883 Method 2002, Condition B MIL-STD-883 Method 2007, Condition A MIL-STD-883 Method 2003 MIL-STD-883 Method 1011, Condition A ESD Rating Model Human Body Model Charged Device Model Minimum Voltage 1500 1000 Conditions MIL-STD-883 Method 3115 JESD 22-C101 Package Labeling Label is 1" x 2.6" (25.4mm x 66.7mm) Font is Courier New Bar code is 39-Full ASCII (the PE33 will show PE11) Label is 1" x 2.6" (25.4mm x 66.7mm) Font is Arial Layout and application information Recommend connecting Pad 1 and Pad 2 together to permit the design to accept Enable/Disable on both input pads For Optimum Jitter Performance, Pletronics recommends: * a ground plane under the device * no large transient signals (both current and voltage) should be routed under the device * do not layout near a large magnetic field such as a high frequency switching power supply * do not place near piezoelectric buzzers or mechanical fans. www.pletronics.com 425-776-1880 5 PE11B Series 3.3 V PECL Clock Oscillators January 2008 Mechanical: Inches A B 1 6 5 2 4 3 mm 9.65 +0.25 _ 13.97 +0.25 _ 3.40 +0.25 _ 1.57 1.27 0.72 R 4.57 2.54 1.27 0.38 0.380 +0.010 _ 0.550 +0.010 _ 0.134 +0.010 _ 0.062 0.050 0.028 R 0.180 0.100 0.050 0.015 1 C D1 E1 F1 G1 FR4 PCB Base: Solder masked All via holes tented on bottom Copper Clad 1/2 oz. Typical Gold plated 0.02 inch (0.5 m) Label: Laser engraved on the 5x7 mm oscillator that is mounted on the FR4 base Pin 3 Ground plane is typical H1 I1 Not to scale J1 Typical Dimensions PE91 Pad 1 Function Output* Note Both outputs must be terminated and biased for proper operation. The ideal termination is 50 ohms connected to 2.0V below the Supply Voltage. The outputs become a High Z when disabled and the voltage level is determined by the termination circuitry. When this pad is not connected the oscillator shall operate. This is not a recommended condition!!!!!! When this pad is <0.80 volts, the output will be inhibited (High impedance state) Recommend connecting this pad to VCC if the oscillator is to be always on. 2 Output Enable/Disable 3 4 Ground (GND) Output Both outputs must be terminated and biased for proper operation. The ideal termination is 50 ohms connected to 2.0V below the Supply Voltage. The outputs become a High Z when disabled and the voltage level is determined by the termination circuitry. No internal connection Recommend connecting appropriate power supply bypass capacitors as close as possible. 5 6 N.C. Supply Voltage (VCC) www.pletronics.com 425-776-1880 6 PE11B Series 3.3 V PECL Clock Oscillators January 2008 Mechanical (obsolete version): The cover is no longer being supplied over this part. This part is made with a hermetically sealed PE99xxDV series oscillator. This part is now exposed. The cover has been deleted, the cover was causing problems with the newer high temperature RoHS lead free processes. The cover purpose was only cosmetic. All parts with 2008 date codes will be made in the new fashion. There is no change in electrical properties. Pletronics does recommend that all designs should transition to the PE99xxDV ceramic part. Inches B A C D1 E1 F1 FR4 PCB Base: Solder masked All via holes tented on bottom Copper Clad 1/2 oz. Typical Gold plated 0.02 inch (0.5 m) Label: White Kapton with Black Letters -or-Blue Epoxy heat cure ink covering top with laser marked lettering G1 Cover: Centered on the base 304 Stainless Steel 0.010 inch (0.25m) Electroless Nickel Plated 1 inch (25 m) typical Pin 3 Ground plane is typical Not to scale H1 I1 J1 K1 0.550 +0.010 _ 0.390 +0.010 _ 0.105 +0.010 _ 0.026 typ. 0.050 0.028 R 0.180 0.100 0.050 0.015 0.380 mm 13.97 +0.25 _ 9.90 +0.25 _ 2.67 +0.25 _ 0.66 1.27 0.72 R 4.57 2.54 1.27 0.38 9.65 * * * The package is not hermetically sealed. The sides are intentionally left open to permit cleaning material to freely flow in the package, thus minimizing the accumulation of contaminants during cleaning processes. The internal part of the package must be thoroughly dry before operating. www.pletronics.com 425-776-1880 7 PE11B Series 3.3 V PECL Clock Oscillators January 2008 Reflow Cycle (typical for lead free processing) 245C Maximum 10 Seconds Maximum 215C10C 175C10C Temperature (C) 250 200 150 100 120 to 160 Seconds Approximately 50 Seconds Allowed rate of temperature change Maximum 4C per second The part may be reflowed 2 times without degradation. Tape and Reel: available for quantities of 250 to 1000 per reel Constant Dimensions Table 1 Tape Size 8mm 12mm 16mm 24mm 1.5 +0.1 -0.0 D0 D1 Min 1.0 1.5 1.5 1.5 1.75 _0.1 + 4.0 0.6 _0.1 + 2.0 _0.1 + 0.6 0.1 E1 P0 P2 S1 Min T Max T1 Max 2.0 _ +0.05 Variable Dimensions Table 2 Tape Size 24 mm B1 Max 12.1 E2 Min F P1 T2 Max 8.0 W Max 16.3 Ao, Bo & Ko Note 1 Not to scale 14.25 7.5 _0.1 + 16.0 +0.1 _ Note 1: Embossed cavity to conform to EIA-481-B Dimensions in mm REEL DIMENSIONS A inches mm B inches mm C D mm mm --7.0 177.8 2.50 63.5 10.0 254.0 4.00 101.6 13.0 +0.5 / -0.2 --24.4 +2.0 -0.0 24.0 13.0 330.2 3.75 95.3 Tape Width Reel dimensions may vary from the above www.pletronics.com 425-776-1880 8 PE11B Series 3.3 V PECL Clock Oscillators January 2008 IMPORTANT NOTICE Pletronics Incorporated (PLE) reserves the right to make corrections, improvements, modifications and other changes to this product at anytime. PLE reserves the right to discontinue any product or service without notice. Customers are responsible for obtaining the latest relevant information before placing orders and should verify that such information is current and complete. All products are sold subject to PLE's terms and conditions of sale supplied at the time of order acknowledgment. PLE warrants performance of this product to the specifications applicable at the time of sale in accordance with PLE's limited warranty. Testing and other quality control techniques are used to the extent PLE deems necessary to support this warranty. Except where mandated by specific contractual documents, testing of all parameters of each product is not necessarily performed. PLE assumes no liability for application assistance or customer product design. Customers are responsible for their products and applications using PLE components. To minimize the risks associated with the customer products and applications, customers should provide adequate design and operating safeguards. PLE products are not designed, intended, authorized or warranted to be suitable for use in life support applications, devices or systems or other critical applications that may involve potential risks of death, personal injury or severe property or environmental damage. Inclusion of PLE products in such applications is understood to be fully at the risk of the customer. Use of PLE products in such applications requires the written approval of an appropriate PLE officer. Questions concerning potential risk applications should be directed to PLE. PLE does not warrant or represent that any license, either express or implied, is granted under any PLE patent right, copyright, artwork or other intellectual property right relating to any combination, machine or process which PLE product or services are used. Information published by PLE regarding third-party products or services does not constitute a license from PLE to use such products or services or a warranty or endorsement thereof. Use of such information may require a license from a third party under the patents or other intellectual property of the third party, or a license from PLE under the patents or other intellectual property of PLE. Reproduction of information in PLE data sheets or web site is permissible only if the reproduction is without alteration and is accompanied by associated warranties, conditions, limitations and notices. Reproduction of this information with alteration is an unfair and deceptive business practice. PLE is not responsible or liable for such altered documents. Resale of PLE products or services with statements different from or beyond the parameters stated by PLE for that product or service voids all express and implied warranties for the associated PLE product or service and is an unfair or deceptive business practice. PLE is not responsible for any such statements. Contacting Pletronics Inc. Pletronics Inc. Tel: 425-776-1880 Fax: 425-776-2760 19013 36th Ave. West Lynnwood, WA 98036-5761 USA E-mail: ple-sales@pletronics.com URL: www.pletronics.com Copyright (c) 2007, 2008 Pletronics Inc. www.pletronics.com 425-776-1880 9 |
Price & Availability of PE1120BEV
 |
|
|
|
|
All Rights Reserved © IC-ON-LINE 2003 - 2022 |
| [Add Bookmark] [Contact Us] [Link exchange] [Privacy policy] |
|
Mirror Sites : [www.datasheet.hk]
[www.maxim4u.com] [www.ic-on-line.cn]
[www.ic-on-line.com] [www.ic-on-line.net]
[www.alldatasheet.com.cn]
[www.gdcy.com]
[www.gdcy.net] |