 |
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
| Datasheet File OCR Text: |
| PT-15SFA * PIN/TIA receiver module * High data rate, up to 15 Gb/s * High sensitivity, -16.5 dBm * 1200-1650 nm wavelength range * AC or DC coupled * MSA 17-pin package Product Bulletin (Preliminary) * June 2007 The PT-15SFA is a -16 dBm sensitivity, differential-output receiver module for OC-192 / STM-64 transmission system receive applications up to 15 Gb/s, providing overhead room for Forward Error Correction algorithms. It couples a high responsivity (0.7 A/W), back-illuminated PIN photodiode, usable from 1200 nm to 1650 nm, with a transimpedance gain stage of 850 . This combination produces a receiver with a 12.3 GHz bandwidth and conversion gain of 700 V/W. The differential-output module is offered in a 17-pin MSA package with single-mode fiber input and the output is available either AC- or DC-coupled. The receiver meets Telcordia GR-468 qualification standards. 1 2 Specifications Wavelength range Bandwidth (-3dB electrical) Low frequency cutoff1 Sensitivity2 Overload Responsivity @ 1550 nm Conversion gain (differential) Output Return Loss (< 15 GHz) Optical Return Loss Power dissipation Minimum 1200 11.8 Typical 12.3 30 -16.5 +3 0.75 700 Maximum Units 1650 nm GHz kHz dBm dBm A/W V/W dB dB W -15.5 0.7 550 -10 -30 0.27 DCElectrical Photodiode voltage Amplifier voltage +5 +3.1 +6 +3.3 +7 +3.5 V V Mechanical Package type Operating temperature Storage temperature With AC-coupled version 10 -12 BER, PRBS 231-1, 12.5 Gb/s -5 -40 17-pin surface mount +75 C +85 C PT-15SFA ProductSpecifications 25.76 1.00 3.00 17 12 11 2.00 5.40 8.00 1 3.00 6 7 10.50 1.65 10.75 3.45 Dimensions are in millimeters 13.75 Pin Description 1 2 3 4 5 6 7 8 9 GND VPD NC Feedback Input NC GND GND Data Out Negative GND Pin Description 10 11 12 13 14 15 16 17 Data Out Positive GND GND NC VAMP NC NC GND ApplicationNotes Electrostatic discharge (ESD) will cause permanent damage to the product. Please avoid any ESD to the input pins or output connector. Use standard ESD protective equipment when handling this product. Temperature and fiber restrictions are as follows: Lead soldering: 250C for no more than 10 seconds Fiber feed-through tube: 120C Fiber pull force: 10 N Fiber bending radius: 1 inch or less Exceeding these conditions can cause permanent damage to the device. PT-15SFAOrderingInformation Basemodel Option format Package option Coupling options Fiber connector options PT-15SFA /Package/Coupling/Fiber connector 17LP AC or DC FC, SC or LC QualityVision As a leader in ultrafast optical receivers, Picometrix is committed to providing the highest quality ultrafast products on the market. This quality vision commits us to continually improving our product designs and manufacturing processes, in order to ensure the highest level of customer satisfaction. The company maintains a stringent quality control program to ensure that all products meet or surpass customer requirements. PT-15SFA Picometrix, LLC * 2925 Boardwalk Ann Arbor, MI * 48104 734-864-5600 * 734-998-3474 fax www.picometrix.com (c) 2007 Picometrix, LLC. All rights reserved. Specifications and output data subject to change without notice. PB-PT-15SFBA-0607-B |
Price & Availability of PT-15SFADC
 |
|
|
|
|
All Rights Reserved © IC-ON-LINE 2003 - 2022 |
| [Add Bookmark] [Contact Us] [Link exchange] [Privacy policy] |
|
Mirror Sites : [www.datasheet.hk]
[www.maxim4u.com] [www.ic-on-line.cn]
[www.ic-on-line.com] [www.ic-on-line.net]
[www.alldatasheet.com.cn]
[www.gdcy.com]
[www.gdcy.net] |