 |
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
| Datasheet File OCR Text: |
| DG3015 Vishay Siliconix Low-Voltage, Low rON, Dual DPDT Analog Switch DESCRIPTION The DG3015 is a dual double-pole/double-throw monolithic CMOS analog switch designed for high performance switching of analog signals. Combining low power, high speed, low on-resistance and small physical size, the DG3015 is ideal for portable and battery powered applications requiring high performance and efficient use of board space. The DG3015 is built on Vishay Siliconix's low voltage JI2 process. An epitaxial layer prevents latchup. Break-beforemake is guaranteed. The switch conducts equally well in both directions when on, and blocks up to the power supply level when off. FEATURES Low Voltage Operation (2.7 V to 3.3 V) Low On-Resistance - rON: 0.80 3 dB Loss at 100 MHz Fast Switching: tON = 40 ns tOFF = 35 ns * MICRO FOOT(R) Package * * * * RoHS COMPLIANT BENEFITS * * * * * Reduced Power Consumption High Accuracy Reduce Board Space TTL/1.8 V Logic Compatible High Bandwidth APPLICATIONS * * * * * Cellular Phones Speaker Headset Switching Audio and Video Signal Routing PCMCIA Cards Battery Operated Systems FUNCTIONAL BLOCK DIAGRAM AND PIN CONFIGURATION A1 Locator DG3015 MICRO FOOT 16-Bump V+ XXX 3015 INA NO1 NC1 NO2 NC2 NO3 NC3 NO4 NC4 INB D GND COM1 TRUTH TABLE Device Marking: 3015 xxx = Data/Lot Traceabillity Code 1 COM2 A COM3 B COM4 C NO4 INB V+ NO1 NO3 GND INA NO2 NC3 COM3 COM2 NC2 2 3 4 Logic 0 1 NC1, 2, 3 and 4 ON OFF NO1, 2, 3 and 4 OFF ON ORDERING INFORMATION Temp Range - 40 to 85 C Package MICRO FOOT: 16 Bump (4 x 4, 0.5 mm Pitch, 238 m Bump Height) Part Number DG3015DB-T2-E1 NC4 COM4 COM1 NC1 Top View Document Number: 72962 S-70853-Rev. C, 30-Apr-07 www.vishay.com 1 DG3015 Vishay Siliconix ABSOLUTE MAXIMUM RATINGS TA = 25 C, unless otherwise noted Parameter Reference V+ to GND IN, COM, NC, NOa Current (Any terminal except NO, NC or COM) Continuous Current (NO, NC or COM) Peak Current (Pulsed at 1 ms, 10 % duty cycle) Storage Temperature Package Solder Reflow Conditionsb Power Dissipation (Packages)c (D Suffix) IR/Convection MICRO FOOT: 16 Bump (4 x 4 mm)d Limit - 0.3 to + 6 - 0.3 to (V+ + 0.3 V) 30 150 250 - 65 to 150 250 719 C mW mA Unit V Notes: a. Signals on NC, NO, or COM or IN exceeding V+ will be clamped by internal diodes. Limit forward diode current to maximum current ratings. b. Refer to IPC/JEDEC (J-STD-020B) c. All bumps welded or soldered to PC Board. d. Derate 9.0 mW/C above 70 C. Permanent damage to the device may occur when the "Absolute Maximum Ratings" are exceeded. These stress ratings do not indicate conditions for which the device is intended to be functional. Functionality is only guaranteed to the conditions specified by the parametric table within the document. SPECIFICATIONS (V+ = 3 V) Test Conditions Otherwise Unless Specified Parameter Analog Switch Analog Signal Ranged On-Resistance rON Flatness rON Match Symbol VNO, VNC, VCOM rON rON Flatness rON INO(off) INC(off) ICOM(off) Channel-On Leakage Current Digital Control Input High Voltage Input Low Voltage Input Capacitance Input Current Dynamic Characteristics Turn-On Time Turn-Off Time Break-Before-Make Time Charge Injection Off-Isolationd Crosstalkd d Limits - 40 to 85 C Tempa Minb Typc Maxb Unit V+ = 3 V, 10 %,VIN = 0.4 V or 2.0 Ve Full V+ = 2.7 V, VCOM = 0.2 V/1.5 V INO, INC = 100 mA V+ = 2.7 V, VCOM = 0 to V+, INO, INC = 100 mA Room Full Room Room Room Full Room Full Room Full Full Full Full Full Room Full Room Full Full CL = 1 nF, VGEN = 0 V, RGEN = 0 RL = 50 , CL = 5 pF, f = 1 MHz Room Room Room Room Room Room Room 0 0.80 V+ 1.2 1.3 V 0.16 0.15 -2 - 20 -2 - 20 -2 - 20 2 0.4 4 -1 40 35 1 3 7 - 67 - 70 63 67 200 196 1 65 67 60 62 2 20 2 20 2 20 Switch Off Leakage Current V+ = 3.3 V, VNO, VNC = 1 V/3 V, VCOM = 3 V/1 V V+ = 3.3 V, VNO, VNC = VCOM = 1 V/3 V nA ICOM(on) VINH VINL Cin IINL or IINH tON tOFF td QINJ OIRR XTALK CNO(off) CNC(off) CNO(on) CNC(on) V pF A VIN = 0 or V+ VNO or VNC = 2.0 V, RL = 300 , CL = 35 pF ns pC dB NO, NC Off Capacitanced Channel-On Capacitanced VIN = 0 or V+, f = 1 MHz pF www.vishay.com 2 Document Number: 72962 S-70853-Rev. C, 30-Apr-07 DG3015 Vishay Siliconix SPECIFICATIONS (V+ = 3 V) Test Conditions Otherwise Unless Specified Parameter Power Supply Power Supply Range Power Supply Current Symbol V+ I+ VIN = 0 or V+ Full V+ = 3 V, 10 %,VIN = 0.4 V or 2.0 Ve Tempa Minb 2.7 Limits - 40 to 85 C Typc Maxb 3.3 1.0 Unit V A Notes: a. Room = 25 C, Full = as determined by the operating suffix. b. Typical values are for design aid only, not guaranteed nor subject to production testing. c. The algebraic convention whereby the most negative value is a minimum and the most positive a maximum, is used in this data sheet. d. Guarantee by design, nor subjected to production test. e. VIN = input voltage to perform proper function. Stresses beyond those listed under "Absolute Maximum Ratings" may cause permanent damage to the device. These are stress ratings only, and functional operation of the device at these or any other conditions beyond those indicated in the operational sections of the specifications is not implied. Exposure to absolute maximum rating conditions for extended periods may affect device reliability. TYPICAL CHARACTERISTICS 25 C, unless otherwise noted 1.2 T = 25 C IS = 100 mA NO Switch r ON - On-Resistance () 1.2 V+ = 3.0 V IS = 100 mA NO Switch 1.0 r ON - On-Resistance () 1.0 0.8 0.8 0.6 V+ = 2.7 V V+ = 3.0 V 0.4 0.6 0.4 0.2 0.2 85 C 25 C - 40 C 0.0 0.0 0.5 1.0 1.5 2.0 2.5 3.0 0.0 0.0 0.5 1.0 1.5 2.0 2.5 3.0 VCOM - Analog Voltage (V) rON vs. VCOM and SIngle Supply Voltage 100 V+ = 3 V VIN = 0 V I+ - Supply Current (nA) 10 I+ - Supply Current (A) VCOM - Analog Voltage (V) rON vs. Analog Voltage and Temperature 10 mA 1 mA 100 A 10 A 1 A 100 nA 10 nA 1 nA V+ = 3 V 1 0.1 - 60 - 40 - 20 0 20 40 60 80 100 100 pA 10 100 1K 10 K 100 K 1M 10 M Temperature (C) Supply Current vs. Temperature Input Switching Frequency (Hz) Supply Current vs. Input Switching Frequency Document Number: 72962 S-70853-Rev. C, 30-Apr-07 www.vishay.com 3 DG3015 Vishay Siliconix TYPICAL CHARACTERISTICS 25 C, unless otherwise noted 1000 V+ = 3 V 800 600 400 200 0 - 200 - 400 - 600 1 - 60 - 800 - 40 - 20 0 20 40 60 80 100 0.0 0.5 1.0 1.5 2.0 2.5 3.0 INO(off), INC(off) ICOM(off) ICOM(on) V+ = 3 V Leakage Current (pA) 100 10 INO(off), INC(off) ICOM(off) ICOM(on) Leakage Current (pA) Temperature (C) VCOM, V NO, V NC - Analog Voltage (V) Leakage Current vs. Temperature 10 Leakage vs. Analog Voltage 60 55 t ON / t OFF - Switching Time (s) - 10 Loss, OIRR, X TALK (dB) 50 45 40 35 30 25 20 -60 - 90 -40 - 20 0 20 40 60 80 100 100 K 1M 10 M Frequency (Hz) 100 M 1G tON, V+ = 3.0 V tOFF,V+ = 3.0 V LOSS OIRR XTALK - 30 - 50 - 70 V+ = 3 V RL = 50 Temperature (C) Switching Time vs. Temperature Insertion Loss, Off-Isolation, Crosstalk vs. Frequency 100 3.0 - Switching Threshold (V) 2.5 Q - Charge Injection (pC) 50 2.0 0 1.5 - 50 V+ = 3 V 1.0 - 100 VT 0.5 - 150 0.0 0 1 2 3 4 5 6 7 V+ - Supply Voltage (V) - 200 0.0 0.5 1.0 1.5 2.0 2.5 3.0 VCOM - Analog Voltage (V) Switching Threshold vs. Supply Voltage Charge Injection vs. Analog Voltage www.vishay.com 4 Document Number: 72962 S-70853-Rev. C, 30-Apr-07 DG3015 Vishay Siliconix TEST CIRCUITS V+ Logic Input V+ Switch Input NO or NC IN Logic Input GND 0V CL (includes fixture and stray capacitance) VOUT = VCOM RL R L + R ON RL 300 CL 35 pF COM Switch Output VOUT VINH 50 % VINL tr < 5 ns tf < 5 ns 0.9 x V OUT Switch Output 0V tON tOFF Logic "1" = Switch On Logic input waveforms inverted for switches that have the opposite logic sense. Figure 1. Switching Time V+ Logic Input COM VO RL 300 CL 35 pF VINH VINL tr < 5 ns tf < 5 ns V+ VNO VNC NO NC IN GND VNC = V NO VO Switch 0V Output 90 % tD tD CL (includes fixture and stray capacitance) Figure 2. Break-Before-Make Interval V+ Rgen + Vgen VIN = 0 - V+ V+ COM IN GND NC or NO VOUT VOUT IN CL = 1 nF On VOUT Off Q= VOUT x CL On IN depends on switch configuration: input polarity determined by sense of switch. Figure 3. Charge Injection Document Number: 72962 S-70853-Rev. C, 30-Apr-07 www.vishay.com 5 DG3015 Vishay Siliconix TEST CIRCUITS V+ 10 nF V+ NC or NO IN COM COM 0 V, 2.4 V RL GND Analyzer VCOM Off Isolation = 20 log V NO/ NC Figure 4. Off-Isolation V+ 10 nF V+ COM Meter IN 0 V, 2.4 V NC or NO GND HP4192A Impedance Analyzer or Equivalent f = 1 MHz Figure 5. Channel Off/On Capacitance www.vishay.com 6 Document Number: 72962 S-70853-Rev. C, 30-Apr-07 DG3015 Vishay Siliconix PACKAGE OUTLINE MICRO FOOT: 16 BUMP (4 x 4, 0.5 mm PITCH, 0.238 mm BUMP HEIGHT) 16 X O 0.150 0.229 Note b Solder Mask O Pad Diameter + 0.1 Silicon A 0.5 A1 A2 Bump Note a 4 3 2 1 b Diameter 0.5 A Recommended Land Pattern Index-Bump A1 Note c e C e B E XXX 3015 Top Side (Die Back) e D S S e e D e Notes (Unless Otherwise Specified): a. Bump is Lead (Pb)-free Sn/Ag/Cu. b. Non-solder mask defined copper landing pad. c. Laser Mark on silicon die back; back-lapped, no coating. Shown is not actual marking; sample only. Millimetersa Min A A1 A2 b D E e S 0.688 0.218 0.470 0.306 1.980 1.980 0.230 Max 0.753 0.258 0.495 0.346 2.020 2.020 0.270 Min 0.0271 0.0086 0.0185 0.0120 0.0780 0.0780 0.0091 Dim Inches Max 0.0296 0.0102 0.0195 0.0136 0.0795 0.0795 0.0106 0.5 BASIC 0.0197 BASIC Notes: a. Use millimeters as the primary measurement. Vishay Siliconix maintains worldwide manufacturing capability. Products may be manufactured at one of several qualified locations. Reliability data for Silicon Technology and Package Reliability represent a composite of all qualified locations. For related documents such as package/tape drawings, part marking, and reliability data, see http://www.vishay.com/ppg?72962. Document Number: 72962 S-70853-Rev. C, 30-Apr-07 www.vishay.com 7 Legal Disclaimer Notice Vishay Disclaimer All product specifications and data are subject to change without notice. Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively, "Vishay"), disclaim any and all liability for any errors, inaccuracies or incompleteness contained herein or in any other disclosure relating to any product. Vishay disclaims any and all liability arising out of the use or application of any product described herein or of any information provided herein to the maximum extent permitted by law. The product specifications do not expand or otherwise modify Vishay's terms and conditions of purchase, including but not limited to the warranty expressed therein, which apply to these products. No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by any conduct of Vishay. The products shown herein are not designed for use in medical, life-saving, or life-sustaining applications unless otherwise expressly indicated. Customers using or selling Vishay products not expressly indicated for use in such applications do so entirely at their own risk and agree to fully indemnify Vishay for any damages arising or resulting from such use or sale. Please contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for such applications. Product names and markings noted herein may be trademarks of their respective owners. Document Number: 91000 Revision: 18-Jul-08 www.vishay.com 1 |
Price & Availability of DG3015
 |
|
|
|
|
All Rights Reserved © IC-ON-LINE 2003 - 2022 |
| [Add Bookmark] [Contact Us] [Link exchange] [Privacy policy] |
|
Mirror Sites : [www.datasheet.hk]
[www.maxim4u.com] [www.ic-on-line.cn]
[www.ic-on-line.com] [www.ic-on-line.net]
[www.alldatasheet.com.cn]
[www.gdcy.com]
[www.gdcy.net] |