View E14-3C94-A100-E_4751886.PDF datasheet online --- IC-ON-LINE

Datasheet File OCR Text:

FERROXCUBE
DATA SHEET
E14/3.5/5 Planar E cores and accessories
Supersedes data of September 2004 2008 Sep 01
Ferroxcube
Planar E cores and accessories
CORES Effective core parameters of a set of E cores SYMBOL (I/A) Ve Ie Ae Amin m PARAMETER core factor (C1) effective volume effective length effective area minimum area mass of core half VALUE 1.43 300 20.7 14.3 14.3 0.6 UNIT mm -1 mm 3 mm mm 2 mm 2 g
handbook, halfpage
E14/3.5/5
14 0.3 11 0.25 3 0.05 2 0.1 3.5 0.1
5 0.1
R 0.8 (12x)
MBE644
Dimensions in mm.
Fig.1 E14/3.5/5 core.
Effective core parameters of an E/PLT combination SYMBOL (I/A) Ve Ie Ae Amin m PARAMETER core factor (C1) effective volume effective length effective area minimum area mass of plate VALUE 1.16 240 16.7 14.5 14.5 0.5 UNIT mm -1 mm 3 mm mm 2 mm 2 g
handbook, halfpage
14 0.3 1.5 0.05
Ordering information for plates GRADE 3C90 3C92 3C93 3C94 3C95 3C96 3F3 3F35 3F4 3F45 3E6 2008 Sep 01 TYPE NUMBER PLT14/5/1.5-3C90 PLT14/5/1.5-3C92 PLT14/5/1.5-3C93 PLT14/5/1.5-3C94 PLT14/5/1.5-3C95 PLT14/5/1.5-3C96 PLT14/5/1.5-3F3 PLT14/5/1.5-3F35 PLT14/5/1.5-3F4 PLT14/5/1.5-3F45 PLT14/5/1.5-3E6 2
Dimensions in mm.
R 0.8
MBE652
5 0.1
Fig.2 PLT14/5/1.5.
Ferroxcube
Planar E cores and accessories
E14/3.5/5
Core halves for use in combination with an ungapped E core AL measured in combination with a non-gapped core half, clamping force for AL measurements, 10 5 N, using a PCB coil containing 4 layers of 8 tracks each, total height 1.6 mm. GRADE 3C90 AL (nH) 63 3% 100 5% 160 8% 1280 25% 3C92 3C93 3C94 960 25% 1100 25% 63 3% 100 5% 160 8% 1280 25% 3C95 3C96 3F3 1500 25% 1200 25% 63 3% 100 5% 160 8% 1100 25% 3F35 3F4 900 25% 63 3% 100 5% 160 8% 650 25% 3F45 3E6 650 25% 5 600 +40/-30% e 72 114 182 1450 1090 1250 72 114 182 1450 1730 1360 72 114 182 1250 1020 72 114 182 740 740 6360 AIR GAP (m) 530 270 130 0 0 0 530 270 130 0 0 0 530 270 130 0 0 530 270 130 0 0 0 TYPE NUMBER E14/3.5/5-3C90-A63-E E14/3.5/5-3C90-A100-E E14/3.5/5-3C90-A160-E E14/3.5/5-3C90 E14/3.5/5-3C92 E14/3.5/5-3C93 E14/3.5/5-3C94-A63-E E14/3.5/5-3C94-A100-E E14/3.5/5-3C94-A160-E E14/3.5/5-3C94 E14/3.5/5-3C95 E14/3.5/5-3C96 E14/3.5/5-3F3-A63-E E14/3.5/5-3F3-A100-E E14/3.5/5-3F3-A160-E E14/3.5/5-3F3 E14/3.5/5-3F35 E14/3.5/5-3F4-A63-E E14/3.5/5-3F4-A100-E E14/3.5/5-3F4-A160-E E14/3.5/5-3F4 E14/3.5/5-3F45 E14/3.5/5-3E6
2008 Sep 01
3
Ferroxcube
Planar E cores and accessories
E14/3.5/5
Core halves for use in combination with a plate (PLT) AL measured in combination with a plate (PLT) clamping force for AL measurements, 10 5 N, using a PCB coil containing 4 layers of 8 tracks each, total height 1.6 mm. GRADE 3C90 AL (nH) 63 3% 100 5% 160 8% 1500 25% 3C92 3C93 3C94 1130 25% 1300 25% 63 3% 100 5% 160 8% 1500 25% 3C95 3C96 3F3 1740 25% 1350 25% 63 3% 100 5% 160 8% 1300 25% 3F35 3F4 1050 25% 63 3% 100 5% 160 8% 780 25% 3F45 3E6 780 25% 6400 +40/-30% e 58 92 148 1400 1040 1200 58 92 148 1400 1600 1260 58 92 148 1200 980 58 92 148 720 720 5900 AIR GAP (m) 600 300 150 0 0 0 600 300 150 0 0 0 600 300 150 0 0 600 300 150 0 0 0 TYPE NUMBER E14/3.5/5-3C90-A63-P E14/3.5/5-3C90-A100-P E14/3.5/5-3C90-A160-P E14/3.5/5-3C90 E14/3.5/5-3C92 E14/3.5/5-3C93 E14/3.5/5-3C94-A63-P E14/3.5/5-3C94-A100-P E14/3.5/5-3C94-A160-P E14/3.5/5-3C94 E14/3.5/5-3C95 E14/3.5/5-3C96 E14/3.5/5-3F3-A63-P E14/3.5/5-3F3-A100-P E14/3.5/5-3F3-A160-P E14/3.5/5-3F3 E14/3.5/5-3F35 E14/3.5/5-3F4-A63-P E14/3.5/5-3F4-A100-P E14/3.5/5-3F4-A160-P E14/3.5/5-3F4 E14/3.5/5-3F45 E14/3.5/5-3E6
2008 Sep 01
4
Ferroxcube
Planar E cores and accessories
Properties of core sets under power conditions B (mT) at GRADE H = 250 A/m; f = 10 kHz; T = 100 C 320 320 370 370 320 320 320 320 320 320 340 340 300 300 300 300 f = 100 kHz; B = 100 mT; T = 100 C 0.030 0.026 0.024 0.021 0.024(1) 0.021(1) 0.024 0.021 - - 0.019 0.016 0.033 0.027 - - CORE LOSS (W) at f = 100 kHz; B = 200 mT; T = 25 C - - - - - - - - 0.17 0.13 - - - - - - f = 100 kHz; B = 200 mT; T = 100 C - - 0.16 0.15 0.16 (1) 0.15 (1) 0.16 0.15 0.16 0.12 0.13 0.12 - - - - f = 400 kHz; B = 50 mT; T = 100 C - - - - - - - - - - 0.05 0.045 0.06 0.047 0.03 0.024
E14/3.5/5
f = 500 kHz; B = 50 mT; T = 100 C - - - - - - - - - - 0.11 0.09 - - 0.05 0.035
E+E14-3C90 E+PLT14-3C90 E+E14-3C92 E+PLT14-3C92 E+E14-3C93 E+PLT14-3C93 E+E14-3C94 E+PLT14-3C94 E+E14-3C95 E+PLT14-3C95 E+E14-3C96 E+PLT14-3C96 E+E14-3F3 E+PLT14-3F3 E+E14-3F35 E+PLT14-3F35
Measured at 140 C.
1.
Properties of core sets under power conditions (continued) B (mT) at GRADE H = 250 A/m; f = 10 kHz; T = 100 C 300 300 250 250 250 250 f = 500 kHz; B = 100 mT; T = 100 C 0.35 0.27 - - - - CORE LOSS (W) at f = 1 MHz; B = 30 mT; T = 100 C - - 0.09 0.07 0.07 0.055 f = 1 MHz; B = 50 mT; T = 100 C - - - - 0.26 0.2 f = 3 MHz; B = 10 mT; T = 100 C - - 0.15 0.12 0.12 0.095
E+E14-3F35 E+PLT14-3F35 E+E14-3F4 E+PLT14-3F4 E+E14-3F45 E+PLT14-3F45
2008 Sep 01
5
Ferroxcube
Planar E cores and accessories
MOUNTING INFORMATION
E14/3.5/5
R 0.75 max.
3.2 min.
handbook, 4 columns
5.3 min.
10.6 max.
CBW549
14.5 min.
Fig.3 Recommended PCB cut-out for glued planar E14/3.5/5 cores.
2008 Sep 01
6
Ferroxcube
Planar E cores and accessories
BLISTER TAPE AND REEL DIMENSIONS
E14/3.5/5
K handbook, full pagewidth0 T D0
P0 P2 E
cover tape B0
F W
MEA613 - 1
A0 P1 direction of unreeling
D1
For dimensions see Table 1.
Fig.4 Blister tape.
Table 1
Physical dimensions of blister tape; see Fig.4 DIMENSIONS (mm) 5.4 0.2 14.6 0.2 4.0 0.2 0.3 0.05 24.0 0.3 1.75 0.1 11.5 0.1 1.5 +0.1 1.5 4.0 0.1 8.0 0.1 2.0 0.1
SIZE A0 B0 K0 T W E F D0 D1 P0 P1 P2
2008 Sep 01
7
Ferroxcube
Planar E cores and accessories
E14/3.5/5
cover film direction of unreeling
blister tape
MEA639
Fig.5 Construction of blister tape.
direction of unreeling leader 552 mm
trailer
minimum number of empty compartments
cover tape only
MEA615
Leader: length of leader tape is 552 mm minimum covered with cover tape. Trailer: 160 mm minimum (secured with tape). Storage temperature range for tape: -25 to +45 C.
Fig.6 Leader/trailer tape.
2008 Sep 01
8
Ferroxcube
Planar E cores and accessories
E14/3.5/5
handbook, full pagewidth
W2
20.5
12.75
0.15 N 0
A
MSA284
W1
Dimensions in mm. For dimensions see Table 2.
Fig.7 Reel.
Table 2
Reel dimensions; see Fig.7 DIMENSIONS (mm)
SIZE A 24 330 N 100 5 W1 24.4 W2 28.4
2008 Sep 01
9
Ferroxcube
Planar E cores and accessories
DATA SHEET STATUS DEFINITIONS DATA SHEET STATUS Preliminary specification Product specification PRODUCT STATUS Development DEFINITIONS
E14/3.5/5
This data sheet contains preliminary data. Ferroxcube reserves the right to make changes at any time without notice in order to improve design and supply the best possible product. This data sheet contains final specifications. Ferroxcube reserves the right to make changes at any time without notice in order to improve design and supply the best possible product.
Production
DISCLAIMER Life support applications These products are not designed for use in life support appliances, devices, or systems where malfunction of these products can reasonably be expected to result in personal injury. Ferroxcube customers using or selling these products for use in such applications do so at their own risk and agree to fully indemnify Ferroxcube for any damages resulting from such application. PRODUCT STATUS DEFINITIONS STATUS Prototype Design-in Preferred Support INDICATION DEFINITION These are products that have been made as development samples for the purposes of technical evaluation only. The data for these types is provisional and is subject to change. These products are recommended for new designs. These products are recommended for use in current designs and are available via our sales channels. These products are not recommended for new designs and may not be available through all of our sales channels. Customers are advised to check for availability.
2008 Sep 01
10

▲Up To Search▲

Price & Availability of E14-3C94-A100-E

	To Download E14-3C94-A100-E Datasheet File
If you can't view the Datasheet, Please click here to try to view without PDF Reader .