 |
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
| Datasheet File OCR Text: |
| CHINA SEMICONDUCTOR CORPORATION Spec. No. PS-LU-U30AHR4-A0R A Rev. PRODUCT SPECIFICATION Model NoCSPR-U30AHR4-A0R LED Type : Superbright Lamp LED Package : Piranha LED Lamp Emitting ColorRed Viewing Angle60 Stopper CUSTOMER APPROVED SIGNATURES APPROVED BY CHINA SEMICONDUCTOR CORPORATION Address:2FL. NO.909,Chung-Cheng Road, Chung-Ho City Taipei Hsien,Taiwan. Tel:886-2-2223-9696 Fax:886-2-2223-9377 Descriptions: CHECKED BY PREPARED BY OPTO PLUS TECHNOLOGIES CO.,LTD Address:696 Shun jiang Rd.,Ji Shan St.Shaoxing, ZheJiang,China Tel:86-0575-88623888 Fax:86-0575-88623112 http://www.csctw.com.tw CHINA SEMICONDUCTOR CORPORATION Model NoCSPR-U30AHR4-A0R Features 1. High Current Operation 2. High Luminous Output 3. High Reliability and Solid Performance 4. Optimal Optical/Mechanical Design Spec. No. PS-LU-U30AHR4-A0R A Rev. 5. Packaged in Tubes for Use with Automatic Pick and Place Equipment 6. Rohs Compliant Device Selection Guide Chip Package Outline Dimensions - Tolerance 0.25 Part No. Material CSPR-U30AHR4-A0R LED Lens Emitted Color Red Water Transparent AlInGaP 0.01 Unit inch mm http://www.csctw.com.tw Page 1/5 CHINA SEMICONDUCTOR CORPORATION Model NoCSPR-U30AHR4-A0R Absolute Maximum Rating - Spec. No. PS-LU-U30AHR4-A0R Rev. A Storage Temp. Tstg Tsol 1/10 -40 ~ +100 Lead Soldering Temperature Max. 260 for 5 sec Max. (3mm from the epoxy bulb) Electro-optical Characteristics (Ta=25) Parameter Forward Voltage Luminous Intensity Luminous Flux Dominant Wavelength Symbol VF IV v d Peak Wavelength Viewing Angle Reverse Current p 2 1/2 http://www.csctw.com.tw IR * Pulse width 0.1 msec. duty Min. ----6600 6000 ----------------- Typ. 2.3 13000 8000 615 625 60 ----- Max. 2.8 ---------------------100 Unit V mcd mlm nm nm deg A VR=5V (Ta=25) Parameter Power Dissipation Forward Current (DC) Peak Forward Current * Reverse Voltage Operating Temp. Symbol Pd IF IFP VR Topr Rating 196 70 100 5 -30 ~ +80 Unit mW mA mA V Condition IF=70mA Page 2/5 CHINA SEMICONDUCTOR CORPORATION Luminous Flux Rank Limits ( IF = 70mA ) unitmlm Part No.CSPR-U30AHR4-A0R Code Spec. No. PS-LU-U30AHR4-A0R A Rev. 1. 2. 3. 4. 5. 6. 7. D E F G H min. 2000 2500 3000 3500 4000 max. 2500 3000 3500 4000 5000 Dominant Wavelength Rank Limits ( IF = 70mA ) unitnm Part No. CSPR-U30AHR4-A0R Code min. max. A5 A6 R1 R2 612 616 620 625 616 620 625 630 Forward Voltage Rank Limits ( IF = 70mA ) unitv Part No. CSPR-U30AHR4-A0R Code min. 1.8 2.0 2.2 2.4 2.6 max. 2.0 2.2 2.4 2.6 2.8 C D E F G Notes: Tolerance of measurement of luminous Flux :15 Tolerance of measurement of dominant wavelength :2nm Tolerance of measurement of forward voltage :0.05v All data are measured by CSC's test equipment. One delivery will include several color rank, VF rank and Iv ranks of the products. The quantity-ratio of the ranks is decided by CSC. Please confirm with CSC salesman,if your request different form standard specification. http://www.csctw.com.tw Page 3/5 CHINA SEMICONDUCTOR CORPORATION Model NoCSPR-U30AHR4-A0R Typical Electrical / Optical Charateristics Curves (Ta = 25 Unless Otherwise Noted) Spec. No. PS-LU-U30AHR4-A0R Rev. A Relative Intensity @ 20mA 1.0 0.5 0 550 600 650 700 Wavelength (nm) Fig 5. Relative Intensity Vs. Wavelength Fig 6. Relative Luminous Intensity vs.Radiation Angle http://www.csctw.com.tw elgnA noitaidaR ---- -------- -- -----------R 0l e a t i v e L u 5.0 i m n o s i t y 1 Page 4/5 CHINA SEMICONDUCTOR CORPORATION Model NoCSPR-U30AHR4-A0R Precautions For Use 1. Recommended Soldering conditions Wave Soldering Spec. No. PS-LU-U30AHR4-A0R A Rev. Temperature(C) be shorter (+10 -1sec.). Power dissipation of iron should be smaller than 15W , and temperature should be controllable. Surface temperature of the device should be under 230. 3. Static Electricity a. Static electricity or surge voltage damages LEDs.. It is recommended that a wrist band or an anit-electrostatic glove be used when handling the LEDs. b. All devices, equipment and machinery must be properly grounded. It is recommended that mesures be taken against surge voltage to the equipment that mounts the LEDs. Note: The specifications are subject to change without notice. Please contact us for updated information. http://www.csctw.com.tw 260(max.) 250 240 Preheat 105(max.) 0 Max. 60sec. Time(sec.) 5 sec. 2. Soldering Iron Basic SPEC. is 5sec. When 260. If temperature is higher, time should Page 5/5 |
Price & Availability of CSPR-U30AHR4-A0R
 |
|
|
|
|
All Rights Reserved © IC-ON-LINE 2003 - 2022 |
| [Add Bookmark] [Contact Us] [Link exchange] [Privacy policy] |
|
Mirror Sites : [www.datasheet.hk]
[www.maxim4u.com] [www.ic-on-line.cn]
[www.ic-on-line.com] [www.ic-on-line.net]
[www.alldatasheet.com.cn]
[www.gdcy.com]
[www.gdcy.net] |