 |
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
| Datasheet File OCR Text: |
| Battrax(R) Single Port Positive/Negative SLIC Protector RoHS (+VREF) 5 This six-pin surface mount package contains programmable protection devices for both negative and positive voltage references. It is constructed using four SCRs and four gate diodes. The SCRs conduct when a voltage that is more negative than -VREF or more positive than +VREF is applied to Pin 1 or 3 of the SCR. During conduction, the SCRs appear as a low-resistive path which forces all transients to be shorted to ground. 3 (R) 1 (T) 2 (-VREF) For a diagram of a Battrax application, see Figure 6.49 in Section 6, "Reference Designs" of this Telecom Design Guide. Electrical Parameters Part Number * B3104U_L B3164U_L B3204U_L VDRM Volts |-VREF| + |1.2V| |-VREF| + |1.2V| |-VREF| + |1.2V| VS Volts |-VREF| + |10V| |-VREF| + |10V| |-VREF| + |10V| VT Volts 4 4 4 IDRM Amps 5 5 5 IGT mAmps 100 100 100 IT Amps 2.2 2.2 2.2 IH mAmps 100 160 200 * "L" in part number indicates RoHS compliance. For non-RoHS compliant device, delete "L" from part number. For individual "UA" and "UC" surge ratings, see table below. General Notes: * All measurements are made at an ambient temperature of 25 C. IPP applies to -40 C through +85 C temperature range. * IPP is a repetitive surge rating and is guaranteed for the life of the product. * IPP ratings assume a VREF = 48 V. * VDRM is measured at IDRM. * VS is measured at 100 V/s. * Positive Battrax information is preliminary data. * VREF maximum value for the negative Battrax is -200 V. * VREF maximum value for the positive Battrax is 110 V. Surge Ratings in Amps IPP Series 0.2x310 * 2x10 * 8x20 * 0.5x700 ** 2x10 ** 1.2x50 ** Amps A C 20 50 Amps 150 500 Amps 150 400 10x160 * 10x160 ** Amps 90 200 10x560 * 10x560 ** Amps 50 150 5x320 * 9x720 ** Amps 75 200 10x360 * 10x1000 * 5x310 * ITSM 10x360 ** 10x1000 ** 10x700 ** 50 / 60 Hz Amps 75 175 Amps 45 100 Amps 75 200 Amps 20 50 di/dt Amps/s 500 500 * Current waveform in s ** Voltage waveform in s Telecom Design Guide * (c) 2006 Littelfuse 3 - 79 www.littelfuse.com SIDACtor Devices Ground 4, 6 Battrax(R) Single Port Positive/Negative SLIC Protector Thermal Considerations Package Modified MS-013 6 5 4 1 2 3 Symbol TJ TS RJA Parameter Operating Junction Temperature Range Storage Temperature Range Thermal Resistance: Junction to Ambient Value -40 to +125 -65 to +150 60 Unit C C C/W Capacitance Values pF Part Number B3104UAL B3104UCL B3164UAL B3164UCL B3204UAL B3204UCL MIN 50 50 50 50 50 50 MAX 200 200 200 200 200 200 Note: Off-state capacitance (CO) is measured at 1 MHz with a 2 V bias. +I IT IGT IH +I VS VDRM -V VT +V -V IDRM IDRM IH IGT IT -I +V VT VDRM VS -I V-I Characteristics for Negative Battrax tr x td Pulse Waveform Percent of VS Change - % 10 IH (TC = 25 C) 14 12 8 6 4 2 0 -4 -6 -8 -40 -20 0 20 40 60 80 100 120 140 160 2.0 1.8 1.6 1.4 1.2 1.0 0.8 0.6 0.4 -40 -20 0 20 40 60 80 100 120 140 160 IH 25 C 25 C Ratio of Junction Temperature (TJ) - C Case Temperature (TC) - C Normalized DC Holding Current versus Case Temperature Normalized VS Change versus Junction Temperature www.littelfuse.com 3 - 80 (c) 2006 Littelfuse * Telecom Design Guide |
Price & Availability of B3104UCL
 |
|
|
|
|
All Rights Reserved © IC-ON-LINE 2003 - 2022 |
| [Add Bookmark] [Contact Us] [Link exchange] [Privacy policy] |
|
Mirror Sites : [www.datasheet.hk]
[www.maxim4u.com] [www.ic-on-line.cn]
[www.ic-on-line.com] [www.ic-on-line.net]
[www.alldatasheet.com.cn]
[www.gdcy.com]
[www.gdcy.net] |