|
If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
Datasheet File OCR Text: |
MD-158 Double-Balanced Mixer, 5 - 1500 MHz Features * * * * * * Low VSWR Conversion Loss: 6 dB Typical Midband LO-RF Isolation: 35 dB Typical Midband Conversion Loss Flatness: 1.5 dB Typical Impedance: 50 Ohms Nominal Maximum Input Power: 300 mW max. @ 25C, Derated linearly to 85C @ 3.2 mW/C * IF Port Current: 50 mA Max. * MIL-STD-883 Screening Available Rev. V3 FP-2 Description Transformers convert the LO and RF paths to balanced lines connecting to a low barrier, Schottky diode ring quad. These transformers help provide excellent isolation between ports. Conversion Loss is low. The direct connection of the IF port to the diode quad allows these mixers to be used as phase detectors and bi-phase modulators. Advanced transformer design yields imporved VSWR. Pin Configuration Pin No. 1 2 3 4 Function GND GND GND IF Pin No. 5 6 7 8 Function LO GND GND RF 1 ADVANCED: Data Sheets contain information regarding a product M/A-COM Technology Solutions * North America Tel: 800.366.2266 * Europe Tel: +353.21.244.6400 is considering for development. Performance is based on target specifications, simulated results, * India Tel: +91.80.4155721 * China Tel: +86.21.2407.1588 and/or prototype measurements. Commitment to develop is not guaranteed. Visit www.macomtech.com for additional data sheets and product information. PRELIMINARY: Data Sheets contain information regarding a product M/A-COM Technology Solutions has under development. Performance is based on engineering tests. Specifications are typical. Mechanical outline has been fixed. Engineering samples and/or test data may be available. M/A-COM Technology Solutions Inc. and its affiliates reserve the right to make Commitment to produce in volume is not guaranteed. changes to the product(s) or information contained herein without notice. MD-158 Double-Balanced Mixer, 5 - 1500 MHz Electrical Specifications1: TA = -55C to +85C Parameter Frequency Range Conversion Loss Test Conditions RF, LO Ports IF Port Frequency 5 - 1500 DC - 1000 5 - 1500 MHz 5 - 1000 MHz LO to RF 5 - 1500 MHz 5 - 1000 MHz 5 - 600 MHz 5 - 1500 MHz 5 - 1000 MHz 5 - 1500 MHz 5 - 1000 MHz 5 - 600 MHz -- Units MHz MHz dB dB dB dB dB dB dB dB dB dB -- mV 1 dB Compression 1 dB Desensitization Within 1 dB of Conversion Loss Max. With -10 dBm input, each input 60 MHz and 70 MHz IF -- 300 MHz 1000 MHz dBm dBm -- dB dB Min -- -- -- -- 20 25 30 17 20 8 18 20 -- -- -- -- -- -- -- Typ -- -- -- -- -- -- -- -- -- -- -- -- -- <1 +1 -1 -- 50 48 Max -- -- 9.0 7.0 -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- Rev. V3 Isolation LO to IF RF to IF DC Polarity DC Offset RF Input SSB Noise Figure Typical Two Tone IM Ratio Negative 1. All specifications apply when operated at +7 dBm available LO power with 50 ohm source and load impedance. 2 ADVANCED: Data Sheets contain information regarding a product M/A-COM Technology Solutions * North America Tel: 800.366.2266 * Europe Tel: +353.21.244.6400 is considering for development. Performance is based on target specifications, simulated results, * India Tel: +91.80.4155721 * China Tel: +86.21.2407.1588 and/or prototype measurements. Commitment to develop is not guaranteed. Visit www.macomtech.com for additional data sheets and product information. PRELIMINARY: Data Sheets contain information regarding a product M/A-COM Technology Solutions has under development. Performance is based on engineering tests. Specifications are typical. Mechanical outline has been fixed. Engineering samples and/or test data may be available. M/A-COM Technology Solutions Inc. and its affiliates reserve the right to make Commitment to produce in volume is not guaranteed. changes to the product(s) or information contained herein without notice. MD-158 Double-Balanced Mixer, 5 - 1500 MHz Typical Performance Curves Rev. V3 Ordering Information Part Number MD-158 PIN Package FP-2 3 ADVANCED: Data Sheets contain information regarding a product M/A-COM Technology Solutions * North America Tel: 800.366.2266 * Europe Tel: +353.21.244.6400 is considering for development. Performance is based on target specifications, simulated results, * India Tel: +91.80.4155721 * China Tel: +86.21.2407.1588 and/or prototype measurements. Commitment to develop is not guaranteed. Visit www.macomtech.com for additional data sheets and product information. PRELIMINARY: Data Sheets contain information regarding a product M/A-COM Technology Solutions has under development. Performance is based on engineering tests. Specifications are typical. Mechanical outline has been fixed. Engineering samples and/or test data may be available. M/A-COM Technology Solutions Inc. and its affiliates reserve the right to make Commitment to produce in volume is not guaranteed. changes to the product(s) or information contained herein without notice. |
Price & Availability of MD-158 |
|
|
All Rights Reserved © IC-ON-LINE 2003 - 2022 |
[Add Bookmark] [Contact Us] [Link exchange] [Privacy policy] |
Mirror Sites : [www.datasheet.hk]
[www.maxim4u.com] [www.ic-on-line.cn]
[www.ic-on-line.com] [www.ic-on-line.net]
[www.alldatasheet.com.cn]
[www.gdcy.com]
[www.gdcy.net] |