View BH5510KVT_4684309.PDF datasheet online --- IC-ON-LINE

Datasheet File OCR Text:

1/3 Structure Product series Type Function Silicon Monolithic Integrated Circuit
PWM Driver for combi drive
BH5510KVT
Super silent spindle drive by S!PWMx2 technology. Built in 2mode of spindle driver's gain for low-speed stability rotation.
Absolute maximum ratings
Parameter Power MOS supply voltage Control circuit power supply voltage Maximum driver output current Power dissipation Operating temperature range Storage temperature range Joint part temperature Symbol PVcc Vcc IoMAX Pd Topr Tstg Tjmax Limits 6 6 3 1 1.37 2 -4085 -55150 150 Unit V V A W
#1 The current is guaranteed 3.0A in case of the current is turned on/off in a duty-ratio of less than 1/10 with a maximum on-time of 5msec and when short brake. #2 PCB (70mmx70mmx1.6mm,occupied copper foil is less than 3%,glass epoxy standard board) mounting. Reduce power by 11.0mW for each degree above 25.
Recommended operating conditions(Ta=-10+70)
Set the power supply voltage taking allowable dissipation into considering Parameter Power MOS supply voltage Control circuit power supply voltage Symbol PVcc Vcc MIN. 3.0 4.0 TYP. 5.0 5.0 MAX. 5.5 5.5 Unit V V
This product isn't designed for protection against radioactive rays. Status of this document The Japanese version of this document is the formal specification. A customer may use this translation version only for a reference to help reading the formal version. If there are any differences in translation version of this document , formal version takes priority.
REV. A
2/3 Electrical characteristics
(Unless otherwise noted Ta=25, Vcc=PVcc=5V, Vref=1.25V, RL(act)=8+47H, RL(SP)=2+47H, SPRNF=0.2) Parameter Circuit current Quiescent current Current in standby mode Input dead zone (one side) Stepping driver block Output offset voltage Voltage gain
Output On resistortop and bottom
Symbol ICC IST VDZSTP4,5 VOO4,5 GVC4,5 RON4,5 f4,5CH VDZSP1 VDZSP2 gm1 gm2 RONSP VLIMSP fSP VDZACT1,2,3 VOO1,2,3 GVC1,2,3 RON1,2,3 f1,2,3CH VMVref VMVcc VSTH VSTHZ VSTL
MIN. 10 -50 12.0 240 2 10 0.8 0.16 0.16 60 -50 12.0 240 3.2 2.6 1.6 0
TYP. 10.5 30 14.0 1.5 300 50 210 1.0 0.2 0.6 0.20 80 14.0 1.3 300 0.7 3.6
MAX. 20 0.1 50 50 16.0 2.3 360 100 460 1.2 0.24 1.2 0.24 100 3 50 16.0 2.0 360 1.0 4.0 3.3 2.0 1.0
Unit mA mA mV mV dB kHz mV mV A/V A/V V kHz mV mV dB kHz V V V V V GVSW=L
Condition VST=2.6V VST=1.0V
Io=500mA
PWM frequency Input dead zone of gm1(one side) Input dead zone of gm2(one side) Spindle driver block Input output gain 1 Input output gain 2
Output On resistortop and bottom
GVSW=H SPRNF=0.2 GVSW=L SPRNF=0.2 GVSW=H Io=500mA SPRNF=0.2
Output limit voltage PWM frequency Input dead zone (one side) Actuator driver block Output offset voltage Voltage gain
Output On resistortop and bottom
Value of design guarantee
Io=500mA
PWM frequency Vref drop mute ON threshold voltage Vcc drop mute ON threshold voltage Others Standby High level voltage range Standby Hi-Z level voltage range Standby Low level voltage range
OPEN(Hi-z) is also available.
Package outlines
(UNIT : mm) Figure No ; EX290-6001
REV. A
3/3 Block diagram / Application circuit
PVcc1 10k IN1 Logic 150 0.047 F CNF1 NF amp VO1F Pre driver POWER MOS VO1R 5V
10k
IN2 Logic 150
VO2F Pre driver POWER MOS VO2R
0.047 F
CNF2
NF amp
IN3 Logic Pre driver POWER MOS
VO3F VO3R PGND1
0.047 F
CNF3
NF amp PVcc3
IN4 Logic Pre driver POWER MOS
VO4F M VO4R
5V
0.033 F
CNF4
NF amp
IN5 Logic Pre driver POWER MOS
VO5F VO5R PGND3
0.033 F
CNF5
NF amp OSC
5V 100k FG
FG 3phase PHASE SHIFT REVERSE PROTECT HB
HUP HUN HVP HVN HWP HWN HB PVcc21 5V
SPCNF 0.01 F OSC
INSP 180deg MATRIX Pre driver POWER MOS
PVcc22 U V W
5V
LIMIT CPH 1000pF GVSW BMSW STBY Vref GVSW BMSW STBY T.S.D. PH
RNF1 RNF2 RNF=0.2
Vcc 22 F GND 5V
REV. A
Appendix
Notes
No technical content pages of this document may be reproduced in any form or transmitted by any means without prior permission of ROHM CO.,LTD. The contents described herein are subject to change without notice. The specifications for the product described in this document are for reference only. Upon actual use, therefore, please request that specifications to be separately delivered. Application circuit diagrams and circuit constants contained herein are shown as examples of standard use and operation. Please pay careful attention to the peripheral conditions when designing circuits and deciding upon circuit constants in the set. Any data, including, but not limited to application circuit diagrams information, described herein are intended only as illustrations of such devices and not as the specifications for such devices. ROHM CO.,LTD. disclaims any warranty that any use of such devices shall be free from infringement of any third party's intellectual property rights or other proprietary rights, and further, assumes no liability of whatsoever nature in the event of any such infringement, or arising from or connected with or related to the use of such devices. Upon the sale of any such devices, other than for buyer's right to use such devices itself, resell or otherwise dispose of the same, no express or implied right or license to practice or commercially exploit any intellectual property rights or other proprietary rights owned or controlled by ROHM CO., LTD. is granted to any such buyer. Products listed in this document are no antiradiation design.
The products listed in this document are designed to be used with ordinary electronic equipment or devices (such as audio visual equipment, office-automation equipment, communications devices, electrical appliances and electronic toys). Should you intend to use these products with equipment or devices which require an extremely high level of reliability and the malfunction of which would directly endanger human life (such as medical instruments, transportation equipment, aerospace machinery, nuclear-reactor controllers, fuel controllers and other safety devices), please be sure to consult with our sales representative in advance. It is our top priority to supply products with the utmost quality and reliability. However, there is always a chance of failure due to unexpected factors. Therefore, please take into account the derating characteristics and allow for sufficient safety features, such as extra margin, anti-flammability, and fail-safe measures when designing in order to prevent possible accidents that may result in bodily harm or fire caused by component failure. ROHM cannot be held responsible for any damages arising from the use of the products under conditions out of the range of the specifications or due to non-compliance with the NOTES specified in this catalog.
Thank you for your accessing to ROHM product informations. More detail product informations and catalogs are available, please contact your nearest sales office.
ROHM Customer Support System
www.rohm.com
Copyright (c) 2007 ROHM CO.,LTD.
THE AMERICAS / EUPOPE / ASIA / JAPAN
Contact us : webmaster@ rohm.co. jp
21, Saiin Mizosaki-cho, Ukyo-ku, Kyoto 615-8585, Japan
TEL : +81-75-311-2121 FAX : +81-75-315-0172
Appendix1-Rev2.0

▲Up To Search▲

Price & Availability of BH5510KVT

	To Download BH5510KVT Datasheet File
If you can't view the Datasheet, Please click here to try to view without PDF Reader .