PROPRIETARY NOTE THIS SPECIFICATION IS THE PROPERTY OF BOE HYDIS AND SHALL NOT BE REPRODUCED OR COPIED WITHOUT THE WRITTEN PERMISSION OF BOE HYDIS AND MUST BE RETURNED TO BOE HYDIS UPON ITS REQUEST
TITLE : HV121WX5-113 Product Specification for Customer Rev. 0
FOR MORE INFORMATION:
AZ Displays, Inc. 75 Columbia, Aliso Viejo, CA 92656 www.azdisplays.com
BOE HYDIS TECHNOLOGY
SPEC. NUMBER S864-1361 B2005-C001-A (1/3)
PRODUCT GROUP TFT LCD
REV. 0
ISSUE DATE 2008.06.18
PAGE 1 OF 33 A4(210 X 297)
PRODUCT GROUP
TFT LCD PRODUCT
REV 0
ISSUE DATE 2008.06.18
REVISION HISTORY
REV. O ECN NO. DESCRIPTION OF CHANGES Initial Release DATE 08.06.18 PREPARED Joseph Ha
SPEC. NUMBER S864-1361 B2005-C001-A (2/3)
SPEC TITLE
HV121WX5-113 Product Specification for Customer
PAGE 2 OF 33 A4(210 X 297)
PRODUCT GROUP
TFT LCD PRODUCT
REV 0
ISSUE DATE 2008.06.18
Contents
No 1.0 2.0 3.0 4.0 5.0 6.0 7.0 8.0 9.0 10.0 11.0 12.0 13.0 14.0 15.0 16.0 General Description Absolute Maximum Ratings Electrical Specifications Optical Specifications Interface Connections Signal Timing Specifications Signal Timing Waveforms Input Signals, Basic Display Colors & Gray Scale of Colors Power Sequence Mechanical Characteristics Mechanical Drawing Reliability Test Handling & Cautions Labels Packing Information EDID Table Item Page 5 6 7 9 14 17 17 19 20 21 22 25 25 27 29 30
SPEC. NUMBER S864-1361 B2005-C001-A (3/3)
SPEC TITLE
HV121WX5-113 Product Specification for Customer
PAGE 3 OF 33 A4(210 X 297)
PRODUCT GROUP
TFT LCD PRODUCT 1.0 GENERAL DESCRIPTION
REV 0
ISSUE DATE 2008.06.18
1.1 Introduction HV121WX5-113 is a color active matrix TFT LCD module using amorphous silicon TFT's (Thin Film Transistors) as an active switching devices. This module has a 12.1 inch diagonally measured active area with WXGA resolutions (1280 horizontal by 800 vertical pixel array). Each pixel is divided into RED, GREEN, BLUE dots which are arranged in vertical Stripe and this module can display 262,144 colors. The TFT-LCD panel used for this module is a low reflection and higher color type.
LVDS Input Signal
1 Connector (CN 1 )
Source Driver LVDS Rx + T/CON
BACK LIGHT (Fluorescent Lamp)
VDD
DC/DC Gamma Vcom
TFT LCD Panel 1280 800
Gate Driver
HVDD VDIM
LED Driver
Back Light (SMD LED Array)
CN2
1.2 Features Thin and Light Weight 3.3 V Logic Power Supply 12V Back-light Power Supply 1 Channel LVDS Interface SMD LED (48EA) Array (Bottom Side/Horizontal Direction) 262,144 Colors Data Enable Signal Mode Side Mounting Frame Green Product (RoHS) SPEC. NUMBER S864-1361 B2005-C001-A (3/3) SPEC TITLE
HV121WX5-113 Product Specification for Customer
PAGE 4 OF 33 A4(210 X 297)
PRODUCT GROUP
TFT LCD PRODUCT
1.3 Application Tablet PC (Wide type)
REV 0
ISSUE DATE 2008.06.18
1.4 General Specifications
Parameter Active area Number of pixels Pixel pitch Pixel arrangement Display colors Display mode Outline dimension Weight Back-light 261.12(H) 1280(H) 0.204(H)
Specification 163.20(V) 800(V) 0.204(V)
Unit mm pixels mm
Remarks
RGB Vertical Stripe 262,144 Normally Black 276.80.3(H) 265(Typ.) SMD LED (48EA) Array 180.00.3(V) 6.8(D:Max.) mm g Note 1 Note 2 colors
Note 1 : at PCB side Note 2 : without digitizer
SPEC. NUMBER S864-1361 B2005-C001-A (3/3)
SPEC TITLE
HV121WX5-113 Product Specification for Customer
PAGE 5 OF 33 A4(210 X 297)
PRODUCT GROUP
TFT LCD PRODUCT 2.0 ABSOLUTE MAXIMUM RATINGS
REV 0
ISSUE DATE 2008.06.18
The followings are maximum values which, if exceed, may cause faulty operation or damage to the unit.
Ta=25+/-2 C
Parameter Logic Power Supply Voltage Logic Power Supply Voltage Back-light Power Supply Voltage Back-light LED Current Back-light LED Reverse Voltage Operating Temperature Storage Temperature
Symbol VDD VIN HVDD ILED VR TOP TSP
Min. -0.3 -0.3 -0.3 0 -20
Max. 4.0 VDD+0.3 40 30 5 +50 +60
Unit V V V mA V
Remarks
Note 1
Note 1, Note 2
Note 1. Ambient temperature vs allowable forward current are shown in the figure below. Note 2. Temperature and relative humidity range are shown in the figure below. 90% RH Max. ( 40 Ta) Maximum wet - bulb temperature at 39 or less. ( > 40 ) No condensation.
Relative Humudity
100 90 80 (40, 90)
60
Operating Range
40
(50, 50)
(60, 27) 20
Storage Range
5 -40 -20 0 20 40 60 80
Temperature ( )
SPEC. NUMBER S864-1361 B2005-C001-A (3/3)
SPEC TITLE
HV121WX5-113 Product Specification for Customer
PAGE 6 OF 33 A4(210 X 297)
PRODUCT GROUP
TFT LCD PRODUCT 3.0 ELECTRICAL SPECIFICATIONS
3.1 Electrical Specifications < Table 3. Electrical Specifications > Parameter Logic Power Supply Voltage Logic Power Supply Current Back-light Power Supply Voltage Back-light Power Supply Current Back-light Power Consumption Power Consumption (EBL) LED Driver's Efficiency Back-light PWM Frequency High Level PWM Signal Voltage Low Level PWM Signal Voltage High Level Differential Input Signal Voltage Low Level Differential Input Signal Voltage Back-light LED Voltage / Back-light LED Total Voltage Back-light LED Current / Back-light LED Total Current Life Time PD Power Consumption PLED FPWM VPWMH VPWML VIH VIL VLED /VBL ILED /IBL VDD IDD HVDD IHVDD PBL PEBL Min. 3.0 7.0 200 2.1 -100
-
REV 0
ISSUE DATE 2008.06.18
Typ. 3.3 300 12.0 255 3.06 1.83 82 280 3.3 0 3.1 / 37.2 16.9 / 67.6 1.0 2.51
Max. 3.6 470 20 305 3.66 2.0 350 5.0 0.6 +100 3.5/ 42.0 17.8/ 71.2 1.55 2.99
Unit V mA V mA W W % V V mV mV V mA Hrs W W
Remarks
Note 1 Note 1 Note 2 Note 2, 3 Note 2, 3 Note 1, 2, 3 Note 2, 3
VCM = 1.2V
Note 4 Note 4 Based on LED Note 1 Note 4
10,000
-
Note 1, 4 Ptotal 3.51 4.54 W Notes : 1. The supply voltage is measured and specified at the interface connector of LCM. The current draw and power consumption specified is for 3.3V at 25 . a) Typ : Window XP pattern, b) Max : Vertical Sub line pattern c) EBL : Mosaic pattern ( 32 X 32 ) 2. The power supply voltage and current is measured and specified at the interface connector of LCM including LED Driver. 3. Reference value, which is measured with LED Driver for 12V. 4. Reference value, which is measured without LED Driver. ILED # of LEDs (48EA) ). 5. Calculated value for reference (VLED
SPEC. NUMBER S864-1361 B2005-C001-A (3/3)
SPEC TITLE
HV121WX5-113 Product Specification for Customer
PAGE 7 OF 33 A4(210 X 297)
PRODUCT GROUP
TFT LCD PRODUCT
3.2 PWM Duty Ratio vs Brightness
100 90 Relative Brightness (%) 80 70 60 50 40 30 20 10 0 0 10 20 30 40 50 60 70
REV 0
ISSUE DATE 2008.06.18
80
90
100
Duty Ratio (%)
Notes : In case of duty ratio 0%, LED can't illuminate itself so this state is LED off. In case of duty ratio 100%, the brightness of LED is maximum and the state is LED on.
SPEC. NUMBER S864-1361 B2005-C001-A (3/3)
SPEC TITLE
HV121WX5-113 Product Specification for Customer
PAGE 8 OF 33 A4(210 X 297)
PRODUCT GROUP
TFT LCD PRODUCT 4.0 OPTICAL SPECIFICATIONS
REV 0
ISSUE DATE 2008.06.18
4.1 Overview The test of optical specifications shall be measured in a dark room (ambient luminance 1 lux and temperature = 252 ) with the equipment of Luminance meter system (Goniometer system and TOPCON BM-5A) and test unit shall be located at an approximate distance 50cm from the LCD surface at a viewing angle of and equal to 0. We refer to O=0 (= 3 ) as the 3 o'clock direction (the "right"), O=90 (= 12 ) as the 12 o'clock direction ("upward"), O=180 (= 9 ) as the 9 o'clock direction ("left") and O=270(= 6 ) as the 6 o'clock direction ("bottom"). While scanning and/or O, the center of the measuring spot on the Display surface shall stay fixed. The backlight should be operating for 30 minutes prior to measurement. VDD shall be 3.3+/- 0.3V at 25C. Optimum viewing angle direction is 6 o'clock. 4.2 Optical Specifications Parameter
Horizontal Viewing Angle range Vertical Luminance Contrast ratio Luminance of 5 Points White White 5 Points Luminance 13 Points uniformity White Chromaticity Red Reproduction of color Green Blue Response Time Cross Talk
Symbol
3 9 12 6
Condition
Min.
190
Typ.
89 89 89 89 500 220 0.300 0.320 0.563 0.354 0.331 0.542 0.146 0.117 30 -
Max.
90 90 90 90 0.340 0.360 0.603 0.394 0.371 0.582 0.186 0.157 2.0
Unit Remarks
Deg. Deg. Deg. Deg. Note 2 cd/m2 % Note 4 Note 5 Note 1
CR > 10
CR Yw Y5 Y13
= 0
= 0
80 60
Wx Wy Rx Ry Gx Gy Bx By
Total (Tr + Td) CT
= 0
0.260 0.280 0.523 0.314 0.291 0.502 0.106 0.077
Note 3
= 0
Ta= 25 C = 0 = 0
-
ms %
Note 6 Note 7
SPEC. NUMBER S864-1361 B2005-C001-A (3/3)
SPEC TITLE
HV121WX5-113 Product Specification for Customer
PAGE 9 OF 33 A4(210 X 297)
PRODUCT GROUP
TFT LCD PRODUCT
Notes :
REV 0
ISSUE DATE 2008.06.18
1. Viewing angle is the angle at which the contrast ratio is greater than 10. The viewing angles are determined for the horizontal or 3, 9 o'clock direction and the vertical or 6, 12 o'clock direction with respect to the optical axis which is normal to the LCD surface (see Figure1). 2. Contrast measurements shall be made at viewing angle of = 0 and at the center of the LCD surface. Luminance shall be measured with all pixels in the view field set first to white, then to the dark (black) state (see Figure1). Luminance Contrast Ratio (CR) is defined mathematically as CR = Luminance when displaying a white raster / Luminance when displaying a black raster. 3. Reference only / Standard Front Surface Treatment Measured with green cover glass. The color chromaticity coordinates specified in Table 4 shall be calculated from the spectral data measured with all pixels first in red, green, blue and white. Measurements shall be made at the center of the panel.
SPEC. NUMBER S864-1361 B2005-C001-A (3/3)
SPEC TITLE
HV121WX5-113 Product Specification for Customer
PAGE 10 OF 33 A4(210 X 297)
PRODUCT GROUP
TFT LCD PRODUCT
4.3 Optical Measurements Figure 1. Measurement Set Up
Photo detector ( TOPCON BM-5A)
REV 0
ISSUE DATE 2008.06.18
Field = 2 TFT-LCD module
o
50 cm LCD panel
Center of the screen
Optical characteristics measurement setup Figure 2. White Luminance and Uniformity Measurement Locations (5 points)
Column Row 200 320 640 960
400
600
Luminance of white is defined as luminance values of 5 points across the LCD surface. Luminance shall be measured with all pixels in the view field set first to white. This measurement shall be taken at the locations shown in Figure 2 for a total of the measurements per display. * (Sum of 5 Points Luminance / 5 ) SPEC TITLE
HV121WX5-113 Product Specification for Customer
SPEC. NUMBER S864-1361 B2005-C001-A (3/3)
PAGE 11 OF 33 A4(210 X 297)
PRODUCT GROUP
TFT LCD PRODUCT
REV 0
ISSUE DATE 2008.06.18
Figure 3. Uniformity Measurement Locations (13 points)
The White luminance uniformity on LCD surface is then expressed as : Y5 = (Minimum Luminance of five points / Maximum Luminance of five points) X 100% (see Figure 2) , Y13 = (Minimum Luminance of 13 points /Maximum Luminance of 13 points) X 100% (see Figure 3).
Figure 4. Response Time Testing
TFT Off(Black)
TFT On(White)
TFT Off(Black)
Tr
Td
100% 90% 10% 0%
SPEC. NUMBER S864-1361 B2005-C001-A (3/3)
SPEC TITLE
HV121WX5-113 Product Specification for Customer
PAGE 12 OF 33 A4(210 X 297)
PRODUCT GROUP
TFT LCD PRODUCT
REV 0
ISSUE DATE 2008.06.18
Figure 5. Cross Modulation Test Description
VIEW AREA VIEW AREA 320,200 960,200
L31
320,600 960,600
YB(1120, 400)
YA (1120, 400) Cross-Talk (%) = YB - YA YB Where: 100
L0
YA = Initial luminance of measured area (cd/m2) YB = Subsequent luminance of measured area (cd/m2) The location measured will be exactly the same in both patterns
The electro-optical response time measurements shall be made as Figure 4 by switching the "data" input signal ON and OFF. The times needed for the luminance to change from 10% to 90% is Tr, and 90% to 10% is Td.
Cross-Talk of one area of the LCD surface by another shall be measured by comparing the luminance (YA) of a 25mm diameter area, with all display pixels set to a gray level, to the luminance (YB) of that same area when any adjacent area is driven dark (Refer to Figure 5).
SPEC. NUMBER S864-1361 B2005-C001-A (3/3)
SPEC TITLE
HV121WX5-113 Product Specification for Customer
PAGE 13 OF 33 A4(210 X 297)
PRODUCT GROUP
TFT LCD PRODUCT 5.0 INTERFACE CONNECTIONS
5.1 Electrical Interface Connection
CN1
Pin No. 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20
REV 0
ISSUE DATE 2008.06.18
Interface Connector (FI-JT40S-HF10, Manufactured by JAE)
Symbol GND1 CONNTST LVDD1 LVDD2 LVDD3 VDD_DEID TEST CLK_EDID DATA_EDID GND2 GND3 NC RIN0RIN0+ GND4 RIN1RIN1+ GND5 RIN2RIN2+ GROUND Connector Test Logic Power Supply : +3.3V Logic Power Supply : +3.3V Logic Power Supply : +3.3V EDID Power Supply : +3.3V NON-CONNECTION EDID Clock EDID Data GROUND GROUND NON-CONNECTION LVDS Negative data signal (-) LVDS Positive data signal (+) GROUND LVDS Negative data signal (-) LVDS Positive data signal (+) GROUND LVDS Negative data signal (-) LVDS Positive data signal (+) Function Pin No. 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 Symbol GND6 RCLKINRCLKIN+ GND7 VDIM Reserved Reserved HVGND1 HVGND2 HVGND3 HVGND4 HVGND5 NC HVDD1 HVDD2 HVDD3 HVDD4 HVDD5 CONNTST GND8 GROUND LVDS Negative clock signal (-) LVDS Positive clock signal (+) GROUND PWM Brightness Control NON-CONNECTION NON-CONNECTION GROUND GROUND GROUND GROUND GROUND NON-CONNECTION Back-light Power Supply: +12V Back-light Power Supply: +12V Back-light Power Supply: +12V Back-light Power Supply: +12V Back-light Power Supply: +12V Connector Test GROUND Function
Note 1. Connected with No. 2 & 39 Note 2. Start from left side
PCB
#1
#40
CN1 (FI-JT40S-HF10)
SPEC. NUMBER S864-1361 B2005-C001-A (3/3)
SPEC TITLE
HV121WX5-113 Product Specification for Customer
PAGE 14 OF 33 A4(210 X 297)
PRODUCT GROUP
TFT LCD PRODUCT
5.2 LVDS Interface LVDS Transmitter : THC63LVDM83A
Input signal R0 R1 R2 R3 R4 R5 G0 G1 G2 G3 G4 G5 B0 B1 B2 B3 B4 B5 HSYNC VSYNC DE MCLK Transmitter Pin No 51 52 54 55 56 3 4 6 7 11 12 14 15 19 20 22 23 24 27 28 30 31 40 39 CLKOUTCLKOUT+ CLKINCLKIN+ 42 41 OUT2OUT2+ IN2IN2+ 46 45 OUT1OUT1+ IN1IN1+ 48 47 OUT0OUT0+ IN0IN0+ Pin No Interface System (Tx) TFT-LCD (Rx)
REV 0
ISSUE DATE 2008.06.18
FI-JH40SHF10 Pin No.
Remark
13 14
16 17
19 20
22 23
SPEC. NUMBER S864-1361 B2005-C001-A (3/3)
SPEC TITLE
HV121WX5-113 Product Specification for Customer
PAGE 15 OF 33 A4(210 X 297)
PRODUCT GROUP
TFT LCD PRODUCT
5.3 Back-light Interface
CN2 Pin No. 1 2 3 4 5 6 7 8 9
REV 0
ISSUE DATE 2008.06.18
LED FPC Connector (04-6298-009, Manufactured by Kyocera) Symbol Anode1 Anode2 Anode3 Anode4 NC Cathode1 Cathode2 Cathode3 Cathode4 Function LED Anode Power Supply LED Anode Power Supply LED Anode Power Supply LED Anode Power Supply Non-Connection LED Cathode Power Supply LED Cathode Power Supply LED Cathode Power Supply LED Cathode Power Supply LED Cathode Power Supply LED Anode Power Supply (3.1V X 12EA = 37.2V) Remark
5.4 Data Input Format
RGBRGB
RGBRGB
1 Pixel = 3 Dots
RGB
RGBRGB
RGBRGB
SPEC. NUMBER S864-1361 B2005-C001-A (3/3)
SPEC TITLE
HV121WX5-113 Product Specification for Customer
PAGE 16 OF 33 A4(210 X 297)
PRODUCT GROUP
TFT LCD PRODUCT 6.0. SIGNAL TIMING SPECIFICATIONS
REV 0
ISSUE DATE 2008.06.18
6.1 The 12.1" WXGA LCM is operated by the only DE (Data enable) mode (LVDS Transmitter Input) Item Frame Period Vertical Display Period One line Scanning Period Horizontal Display Period Clock Frequency Symbol T1 T2 T3 T4 1/T5 Min. 810 1350 Typ. 823 800 1440 1280 69.3 Max. Unit Lines Lines Clocks Clocks MHz
7.0 SIGNAL TIMING WAVEFORMS
7.1 Timing Waveforms of Interface Signal
T1 T2 DE
T3 DCLK T5 T4 DE
DATA SIGNALS
Valid display data (1280 Clocks)
SPEC. NUMBER S864-1361 B2005-C001-A (3/3)
SPEC TITLE
HV121WX5-113 Product Specification for Customer
PAGE 17 OF 33 A4(210 X 297)
PRODUCT GROUP
TFT LCD PRODUCT
7.2 LVDS Rx Interface Timing Parameter The specification of the LVDS Rx interface timing parameter
< LVDS Rx Interface Timing Specification>
REV 0
ISSUE DATE 2008.06.18
Item CLKIN Period Input Data 0 Input Data 1 Input Data 2 Input Data 3 Input Data 4 Input Data 5 Input Data 6
Symbol tRCIP tRIP0 tRIP1 tRIP2 tRIP3 tRIP4 tRIP5 tRIP6 2 3 4 5 6
Min. 12.50 -0.4 tRICP/7-0.4 tRICP/7-0.4 2 tRICP/7-0.4 3 tRICP/7-0.4 4 tRICP/7-0.4 5 tRICP/7-0.4 6
Typ. 14.43 0.0 tRICP/7 tRICP/7 2 tRICP/7 3 tRICP/7 4 tRICP/7 5 tRICP/7 6
Max. 25.00 +0.4 tRICP/7+0.4
Unit Remarks nsec nsec nsec
tRICP/7+0.4 nsec tRICP/7+0.4 nsec tRICP/7+0.4 nsec tRICP/7+0.4 nsec tRICP/7+0.4 nsec
tRIP6 tRIP5 tRIP4 tRIP3 tRIP2 tRIP1 tRIP0 RxINz +/* Z = 0, 1, 2 RxCLKIN+/Rx Rx Rx Rx Rx Rx Rx Rx Rx Rx Rx
Vdiff=0[v] tRCIP
Vdiff=0[v]
SPEC. NUMBER S864-1361 B2005-C001-A (3/3)
SPEC TITLE
HV121WX5-113 Product Specification for Customer
PAGE 18 OF 33 A4(210 X 297)
PRODUCT GROUP
TFT LCD PRODUCT
REV 0
ISSUE DATE 2008.06.18
8.0 INPUT SIGNALS, BASIC DISPLAY COLORS & GRAY SCALE OF COLORS
Each color is displayed in sixty-four gray scales from a 6 bit data signal input. A total of 262,144 colors are derived from the resultant 18 bit data.
Colors & Gray Scale Black Blue Green Basic Cyan Colors Red Magenta Yellow White Black Gray Scale Of Red Darker Red Data
R5 R4 R3 R2 R1 R0 G5
Green Data 0 0 0 0 1 1 1 1 0 0 1 0 0 0 0 1 1 1 1 0 1 0 0 0 1 1 0 0 1 1 0 0 0 0 0 1 1 0 0 1 1 0 0 0 0 0 1 1 0 0 1 1 0 0 0 0 0 1 1 0 0 1 1 0 0 0 0 0 1 1 0 0 1 1 0 0 0 0 0 1 1 0 0 1 1 0 0 0 0 1 0 1 0 1 0 1 0 0 0 0 1 0 1 0 1 0 1 0 0 0
Blue Data 0 1 0 1 0 1 0 1 0 0 0 0 1 0 1 0 1 0 1 0 0 0 0 1 0 1 0 1 0 1 0 0 0 0 1 0 1 0 1 0 1 0 0 0
G4 G3 G2 G1 G0 B5 B4 B3 B2 B1 B0
0 0 0 0 1 1 1 1 0 0 0
0 0 0 0 1 1 1 1 0 0 0
0 0 0 0 1 1 1 1 0 0 0
0 0 0 0 1 1 1 1 0 0 0
Brighter Red Black
Gray Scale Of Green
Darker
1 1 1 0 0 0
1 1 1 0 0 0
1 1 1 0 0 0
1 1 1 0 0 0
0 1 1 0 0 0
1 0 1 0 0 0
0 0 0 0 0 0
0 0 0 0 0 0
0 0 0 0 0 0
0 0 0 0 0 0
0 0 0 0 0 1
0 0 0 0 1 0
0 0 0 0 0 0
0 0 0 0 0 0
0 0 0 0 0 0
0 0 0 0 0 0
0 0 0 0 0 0
0 0 0 0 0 0
Brighter Green Black
Gray Scale Of Blue
Darker
0 0 0 0 0 0
0 0 0 0 0 0
0 0 0 0 0 0
0 0 0 0 0 0
0 0 0 0 0 0
0 0 0 0 0 0
1 1 1 0 0 0
1 1 1 0 0 0
1 1 1 0 0 0
1 1 1 0 0 0
0 1 1 0 0 0
1 0 1 0 0 0
0 0 0 0 0 0
0 0 0 0 0 0
0 0 0 0 0 0
0 0 0 0 0 0
0 0 0 0 0 1
0 0 0 0 1 0
Brighter Blue Black
Gray Scale Of White & Black
Darker
0 0 0 0 0 0
0 0 0 0 0 0
0 0 0 0 0 0
0 0 0 0 0 0
0 0 0 0 0 1
0 0 0 0 1 0
0 0 0 0 0 0
0 0 0 0 0 0
0 0 0 0 0 0
0 0 0 0 0 0
0 0 0 0 0 1
0 0 0 0 1 0
1 1 1 0 0 0
1 1 1 0 0 0
1 1 1 0 0 0
1 1 1 0 0 0
0 1 1 0 0 1
1 0 1 0 1 0
Brighter White
1 1 1
1 1 1
1 1 1
1 1 1
0 1 1
1 0 1
1 1 1
1 1 1
1 1 1
1 1 1
0 1 1
1 0 1
1 1 1
1 1 1
1 1 1
1 1 1
0 1 1
1 0 1
SPEC. NUMBER S864-1361 B2005-C001-A (3/3)
SPEC TITLE
HV121WX5-113 Product Specification for Customer
PAGE 19 OF 33 A4(210 X 297)
PRODUCT GROUP
TFT LCD PRODUCT 9.0 POWER SEQUENCE
REV 0
ISSUE DATE 2008.06.18
To prevent a latch-up or DC operation of the LCD module, the power on/off sequence shall be as shown in below
0.9VDD
0.9VDD 0.1VDD
Power Supply
0V
0.1VDD
T1 T2
T5
T7 T6
Interface Signal
Valid
0V
T3
T4
Back- light
0V
T1 10 ms 0 T2 50 ms 200 ms T3 200 ms T4 0 T5 50 ms 0 T6 10ms 500ms T7 Notes : 1. When the power supply VDD is 0V, Keep the level of input signals on the low or keep high impedance. 2. Do not keep the interface signal high impedance when power is on. 3. Back Light must be turn on after power for logic and interface signal are valid.
SPEC. NUMBER S864-1361 B2005-C001-A (3/3)
SPEC TITLE
HV121WX5-113 Product Specification for Customer
PAGE 20 OF 33 A4(210 X 297)
PRODUCT GROUP
TFT LCD PRODUCT 10.0 MECHANICAL CHARACTERISTICS
REV 0
ISSUE DATE 2008.06.18
10.1 Dimensional Requirements Figure 6 & 7 (located in 11.0) shows mechanical outlines for the model Parameter Active Area Number of pixels Pixel pitch Pixel arrangement Display colors Display mode Outline dimension Weight Back-light Specification 261.12(H) X 163.20(V) 1280(H) X 800(V) (1 pixel = R + G + B dots) 0.204(H) X 0.204(V) RGB Vertical stripe 262,144 Normally Black 276.8 0.3(H) 180.0(V) 0.3 6.8(D:Max.) 265(Typ.) SMD LED (48EA) Array mm g Unit mm
10.2 Mounting See Figure 6 & 7 & 8. (shown in 11.0) Parameter Torque of side mounting screw Torque of ground plate screw Torque of top side screw 2.5(Max.) 1.5(Max.) 2.5(Max.) Specification Unit kgf kgf kgf
10.3 Anti-Glare and Polarizer Hardness. The surface of the LCD has an anti-glare coating to minimize reflection and a coating to reduce scratching. 10.4 Light Leakage There shall not be visible light from the back-lighting system around the edges of the screen as seen from a distance 50cm from the screen with an overhead light level of 150lux. The manufacture shall furnish limit samples of the panel showing the light leakage acceptable.
SPEC. NUMBER S864-1361 B2005-C001-A (3/3)
SPEC TITLE
HV121WX5-113 Product Specification for Customer
PAGE 21 OF 33 A4(210 X 297)
PRODUCT GROUP
TFT LCD PRODUCT 11.0 Mechanical Drawing
REV 0
ISSUE DATE 2008.06.18
Figure 6. TFT-LCD Module Outline Dimension (Front View)
SPEC. NUMBER S864-1361 B2005-C001-A (3/3)
SPEC TITLE
HV121WX5-113 Product Specification for Customer
PAGE 22 OF 33 A4(210 X 297)
PRODUCT GROUP
TFT LCD PRODUCT
REV 0
ISSUE DATE 2008.06.18
Figure 7. TFT-LCD Module Outline Dimensions (Rear view)
SPEC. NUMBER S864-1361 B2005-C001-A (3/3)
SPEC TITLE
HV121WX5-113 Product Specification for Customer
PAGE 23 OF 33 A4(210 X 297)
PRODUCT GROUP
TFT LCD PRODUCT
REV 0
ISSUE DATE 2008.06.18
Figure 8. TFT-LCD Module Section for Mounting
SPEC. NUMBER S864-1361 B2005-C001-A (3/3)
SPEC TITLE
HV121WX5-113 Product Specification for Customer
PAGE 24 OF 33 A4(210 X 297)
PRODUCT GROUP
TFT LCD PRODUCT 12.0 RELIABLITY TEST
The Reliability test items and its conditions are shown in below. No 1 2 3 4 5 6 7 Test Item High temperature storage test Low temperature storage test High temperature & high humidity operation test High temperature operation test Low temperature operation test Thermal shock Vibration test (non-operating) Shock test (non-operating) Electro-static discharge test (non-operating)
REV 0
ISSUE DATE 2008.06.18
Conditions
Ta = 60 C, 240 hrs Ta = -20 C, 240 hrs Ta = 50 , 80%RH, 240hrs
Ta = 50 C, 240 hrs Ta = 0 C, 240 hrs Ta = -20 C 60 C (30 min), 100 cycle Frequency : 10~500Hz Gravity/AMP : 1.5G Period : X,Y,Z 30min Gravity : 220G Pulse width : 2ms, half sine wave X, Y, Z Once for each direction Air : 150pF, 330ohm, 15KV Contact : 150pF, 330ohm, 8KV
8
9
13.0 HANDLING & CAUTIONS
13.1 Cautions when taking out the module Pick the pouch only, when taking out module from a shipping package. 13.2 Cautions for handling the module As the electrostatic discharges may break the LCD module, handle the LCD module with care. Peel a protection sheet off from the LCD panel surface as slowly as possible. As the LCD panel and back - light element are made from fragile glass (epoxy) material, impulse and pressure to the LCD module should be avoided. As the surface of the polarizer is very soft and easily scratched, use a soft dry cloth without chemicals for cleaning. Do not pull the interface connector in or out while the LCD module is operating. Put the module display side down on a flat horizontal plane. Handle connectors and cables with care. SPEC. NUMBER S864-1361 B2005-C001-A (3/3) SPEC TITLE
HV121WX5-113 Product Specification for Customer
PAGE 25 OF 33 A4(210 X 297)
PRODUCT GROUP
TFT LCD PRODUCT
REV 0
ISSUE DATE 2008.06.18
13.3 Cautions for the operation When the module is operating, do not lose MCLK, DE signals. If any one of these signals were lost, the LCD panel would be damaged. Obey the supply voltage sequence. If wrong sequence is applied, the module would be damaged. 13.4 Cautions for the atmosphere Dew drop atmosphere should be avoided. Do not store and/or operate the LCD module in a high temperature and/or humidity atmosphere. Storage in an electro-conductive polymer packing pouch and under relatively low temperature atmosphere is recommended. 13.5 Cautions for the module characteristics Do not apply fixed pattern data signal to the LCD module at product aging. Applying fixed pattern for a long time may cause image sticking. 13.6 Cautions for the digitizer assembly When assembling FPC connector, do not flip connector past 90 due to possible damage to connector. When positioning digitizer underneath driver IC, do not lift driver IC past 90 due to possible damage to drive IC pattern. Please be warned that during assembly of digitizer, the opening or closing of FPC will result in possible electrostatic discharge damage to the LED 13.7 Other cautions Do not re-adjust variable resistor or switch etc. When returning the module for repair or etc., Please pack the module not to be broken. We recommend to use the original shipping packages.
SPEC. NUMBER S864-1361 B2005-C001-A (3/3)
SPEC TITLE
HV121WX5-113 Product Specification for Customer
PAGE 26 OF 33 A4(210 X 297)
PRODUCT GROUP
TFT LCD PRODUCT 14.0 LABELS
14.1 Product Label
REV 0
ISSUE DATE 2008.06.18
HV121WX5-113
BOE HYDIS Barcode
1 2 3 4 5 6 7
XX
X
X
XX
X
X XX
X
XXXXXX
No 1. Control Number No 2. Rank / Grade No 3. Line Classification (BOE HYDIS : H, LCM : L, BOE OT : A/B/C) No 4. Year (5 : 2005, 6 : 2006, ...)
No 5. Month (1, 2, 3,..., 9, X, Y, Z) No 6. FG Code No 7. Serial Number
SPEC. NUMBER S864-1361 B2005-C001-A (3/3)
SPEC TITLE
HV121WX5-113 Product Specification for Customer
PAGE 27 OF 33 A4(210 X 297)
PRODUCT GROUP
TFT LCD PRODUCT
14.2 Packing Label Label Size: 108 mm (L) x 56 mm (W) Contents Model: HV121WX5-113 Qty: Module Qty in one box Serial No.: Box Serial No. See next figure for detail description. Date: Packing Date FG Code: FG Code of Product
REV 0
ISSUE DATE 2008.06.18
HV121WX5-113
00 0 00 0 0 000000 Type Grade Year Month ITEM-CODE Serial no.
FG CODE
RoHS Mark
SPEC. NUMBER S864-1361 B2005-C001-A (3/3)
SPEC TITLE
HV121WX5-113 Product Specification for Customer
PAGE 28 OF 33 A4(210 X 297)
PRODUCT GROUP
TFT LCD PRODUCT 15.0 PACKING INFORMATION
15.1 Packing order
REV 0
ISSUE DATE 2008.06.18
Put Pad into the box.
Put silica gels in the box.
After sealing the box, attach Packing Label on the attach position sign area of the box.
Place a cover on the top of the box. As shown in the figure, place the Modules bundled by shielding bag in the box.
15.2 Notes Box Dimension : 349.0mm(W) X 261.0mm(D) X 311.0mm(H) Package Quantity in one Box : 10pcs SPEC TITLE
HV121WX5-113 Product Specification for Customer
SPEC. NUMBER S864-1361 B2005-C001-A (3/3)
PAGE 29 OF 33 A4(210 X 297)
PRODUCT GROUP
TFT LCD PRODUCT 16.0 EDID Table
EDID chip is 24LC024 (Microchip) or equivalent .
Address
(HEX) 00 01 02 03 04 05 06 07 08 09 0A 0B 0C 0D 0E 0F 10 11 12 13 14 15 16 17 18 19 1A 1B 1C 1D 1E 1F 20 21 22
REV 0
ISSUE DATE 2008.06.18
Function
Hex
00 FF FF FF FF FF FF 00 09 E5 9B 08 00 00 00 00 0 11 01 03 80 1A 10 78 0A 6F 8C 90 5A 54 8A 25 1E 4C 52
Dec
0 255 255 255 255 255 255 0 9 229 155 8 0 0 0 0 0 17 1 3 128 26 16 120 10 111 140 144 90 84 138 37 30 76 82
values.
Notes
Header
EDID Header
ID Manufacturer Name ID Product Code
BOE 2203
ID = BOE CODE = 2203
32-bit serial No.
Week of manufacture Year of Manufacture EDID Structure Ver. EDID revision # Video input definition Max H image size Max V image size Display Gamma Feature support Red/Green low bits Blue/White low bits Red x high bits Red y high bits Green x high bits Green y high bits Blue x high bits BLue y high bits White x high bits White y high bits
2007 1 3 26 16 2.2
Manufactured in 2007 EDID Ver 1.0 EDID Rev. 0.3 26 cm (Approx) 16 cm (Approx) Gamma curve = 2.2 RGB display, Preferred Timming mode Red / Green Low Bits Blue / White Low Bits Rx = 0.563 Ry = 0.354 Gx = 0.331 Gy = 0.542 Bx = 0.146 By = 0.117 Wx = 0.300 Wy = 0.320
0.563 0.354 0.331 0.542 0.146 0.117 0.300 0.320
SPEC. NUMBER S864-1361 B2005-C001-A (3/3)
SPEC TITLE
HV121WX5-113 Product Specification for Customer
PAGE 30 OF 33 A4(210 X 297)
PRODUCT GROUP
TFT LCD PRODUCT
Address
(HEX) 23 24 25 26 27 28 29 2A 2B 2C 2D 2E 2F 30 31 32 33 34 35 36 37 38 39 3A 3B 3C 3D 3E 3F 40 41 42 43 44 45 46 47 Detailed timing/monitor descriptor #1 (60Hz)
REV 0
ISSUE DATE 2008.06.18
Function
Established timing 1 Established timing 2 Established timing 3 Standard timing #1 Standard timing #2 Standard timing #3 Standard timing #4 Standard timing #5 Standard timing #6 Standard timing #7 Standard timing #8
Hex
00 00 00 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 12 1B 00 A0 50 20 17 30 30 20 36 00 05 A3 10 00 00 19
Dec
0 0 0 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 18 27 0 160 80 32 23 48 48 32 54 0 5 163 16 0 0 25
values.
Notes
Not Used Not Used Not Used Not Used Not Used Not Used Not Used Not Used 69.30 1280 160 69.3MHz Main clock Hor Active = 1280 Hor Blanking = 160 4 bits of Hor. Active + 4 bits of Hor. Blanking Ver Active = 800 Ver Blanking = 23 4 bits of Ver. Active + 4 bits of Ver. Blanking Hor Sync Offset = 48 H Sync Pulse W idth = 32 V sync Offset = 3 line V Sync Pulse width : 6 line Horizontal Image Size = 261 mm (Low 8 bits) Vertical Image Size = 163 mm (Low 8 bits) 4 bits of Hor Image Size + 4 bits of Ver Image Size Hor Border (pixels) Vertical Border (Lines)
800 23
48 32 3 6 261 163
SPEC. NUMBER S864-1361 B2005-C001-A (3/3)
SPEC TITLE
HV121WX5-113 Product Specification for Customer
PAGE 31 OF 33 A4(210 X 297)
PRODUCT GROUP
TFT LCD PRODUCT
Address
(HEX) 48 49 4A 4B 4C 4D 4E 4F 50 51 52 53 54 55 56 57 58 59 5A 5B 5C 5D 5E 5F 60 61 62 63 64 65 66 67 68 69 6A 6B
REV 0
ISSUE DATE 2008.06.18
Function
Hex
00 00 00 FE 00 0A 20 20 20 20 20 20 20 20 20 20 20 20 00 00 00 FE 00 42 4F 45 20 48 59 44 49 53 0A 20 20 20
Dec
0 0 0 254 0 10 32 32 32 32 32 32 32 32 32 32 32 32 0 0 0 254 0 66 79 69 32 72 89 68 73 83 10 32 32 32
values.
Notes
Detailed timing/monitor descriptor #2
B O E H Y D I S
Detailed timing/monitor descriptor #3
SPEC. NUMBER S864-1361 B2005-C001-A (3/3)
SPEC TITLE
HV121WX5-113 Product Specification for Customer
PAGE 32 OF 33 A4(210 X 297)
PRODUCT GROUP
TFT LCD PRODUCT
Address
(HEX) 6C 6D 6E 6F 70 71 72 73 74 75 76 77 78 79 7A 7B 7C 7D 7E 7F
REV 0
ISSUE DATE 2008.06.18
Function
Hex
00 00 00 FE 00 48 56 31 32 31 57 58 35 2D 31 31 31 0A 00 60
Dec
0 0 0 254 0 72 86 49 50 49 87 88 53 45 49 49 49 10 0 96
values.
Notes
Product Name Tag (ASCII)
Detailed timing/monitor descriptor #4
H V 1 2 1 W X 5 1 1 1
Model name : HV121WX5-111
Extension flag Checksum
SPEC. NUMBER S864-1361 B2005-C001-A (3/3)
SPEC TITLE
HV121WX5-113 Product Specification for Customer
PAGE 33 OF 33 A4(210 X 297)
| |
Price & Availability of HV121WX5-113
 |
|
|
|
|
|
All Rights Reserved ©
IC-ON-LINE 2003 - 2022 |
.
.
.
.
.
| |
We use cookies to deliver the best possible
web experience and assist with our advertising efforts. By continuing to use
this site, you consent to the use of cookies. For more information on
cookies, please take a look at our
Privacy Policy. |
X |
|
