|
If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
Datasheet File OCR Text: |
Series 252 (R) Two Axis, Ministick Controller With Optional Momentary Switch Features * Compact Size (20x21x13mm) * Long Life 1 Million Cycles * Optional momentary switch is operational at all rotations * Sturdy metal case with convenient mounting tabs * RoHS compliant Pat. No: US 6,353,430 , Taiwan: 128688. Pat. Pending in Japan & China Electrical and Mechanical Specifications Potentiometer 1 & 2 Resistance Range 10 K ohms through 200 K ohms Resistance Tolerance Standard: 30% Special: 10% and 20% available Insulation Resistance 100 Megaohms min @ 250 VDC Rotational Torque of Stick 200 80 gf.cm at 10 deflection Power Rating 0.0125 watt @ 50C, Derated to no load at 85C Operating Voltage 50 VAC or 5 VDC maximum Angle of Rotation 60 maximum Life Standard: 1,000,000 cycles Special: Consult CTS RoHS Compliance Compliant with European Union RoHS Directive Available Switch Type Momentary Contact Resistance 100 milliohms max Maximum Contact Resistance 200 milliohms max after 500,000 cycles switching 5mA @ 5VDC Dielectric Strength 250 VAC 50/60 Hz for 1 minute Insulation Resistance 100 Megaohms min @ 100 VDC Operational Force 800200 g Power Rating 12 VDC, 50 mA maximum Travel 0.9 0.4mm Switch Life 500,000 cycles 1-2 CTS Electronic Components (c) 2006 CTS Corporation. All rights reserved. Information subject to change. www.ctscorp.com 6/20/06 Electrical and Mechanical Specifications Potentiometer 1 & 2 Operating Temperature -10C to +70C Mounting Information PC Terminals Soldering Conditions Wave - up to 5 seconds at 260C No Solder or flux on component side of board CTS Series 252 OPERATION ANGLE 53~63 (ALL DIRECTION) A +0.4 DIM "L" -0.3 .760 +.016 -.012 12.20.3 .480.012 A 11.8 .465 123 CENT. 5.00 .197 1.90 15.50 CENT. .075 .610 6.50 CENT. .256 7.3 .287 CENT. 4.50 .177 O1.3+0.1 -0.0 (4) .051 +.004 +0.1 -.000 O1.0-0.0 (6) .039 +.004 -.000 1.200.05 .047.002 c a 3.30.3 .130.012 c a 1 23 3.80.3 .150.012 1.1(4) .043 0.80.1(6) .031.004 d b d b 1.900.05 .075.002 SECTION A-A SCALE : 10X 9.3 .366 11.2 .441 CENT. 16.0 .630 1 CENT. 5.00 .197 23 CENT. 13.30 .524 O1.0+0.1 -0.0 (4) HOLES FOR .039+.004 OPTIONAL SWITCH -.000 TERMINALS 3.00 .118 SWITCH CIRCUIT DIAGRAM VR 1 CENT. 16.0 .630 CENT. 12.0 .472 VR 2 mm DIMENSION: inch CENT. 9.5 .374 Ordering Information 252 DRIVE ARM LENGTH DIM "L" LENGTH FROM MOUNTING SURFACE A 103 C RESIST TOL A - 10% B - 20% C - 30% 60 N A RESISTANCE CODE EXAMPLES CODE 103 203 503 104 124 154 RESISTANCE 10K 20K 50K 100K 120K 150K TAP CONFIGURATION N - NO TAP T - 4 TAP AT CENTER A - 19.3mm B - 24.3mm ROTATIONAL ANGLE 40 - 40 50 - 50 60 - 60 SWITCH CONFIGURATION A - W/O SWITCH B - MOMENTARY SWITCH 2-2 CTS Electronic Components (c) 2006 CTS Corporation. All rights reserved. Information subject to change. www.ctscorp.com 11.2 .441 9.5 .374 MOUNTING HOLE DETAIL VIEWED FROM MOUNTING SIDE 6/20/06 |
Price & Availability of 252A103CNA |
|
|
All Rights Reserved © IC-ON-LINE 2003 - 2022 |
[Add Bookmark] [Contact Us] [Link exchange] [Privacy policy] |
Mirror Sites : [www.datasheet.hk]
[www.maxim4u.com] [www.ic-on-line.cn]
[www.ic-on-line.com] [www.ic-on-line.net]
[www.alldatasheet.com.cn]
[www.gdcy.com]
[www.gdcy.net] |