 |
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
| Datasheet File OCR Text: |
| DACT-E3 Description The Digital Alarm Communicator Transmitter (DACT-E3) is an optional component of the E3 Series(R) Expandable Emergency Evacuation System. The DACT-E3 sends digital signals over the telephone network to a central station. This module can be located in the main cabinet or remotely located via a local RS-485 serial interface. The DACT-E3 is compatible with digital alarm communicator receivers (DACRs) that receive the following signaling formats: * SIA DC8 * 3+1 2300 Hz * SIA DCS20 * 4+2 1400 Hz * Ademco Contact ID * 4+2 2300 Hz * 3+1 1400 Hz In addition to the DACT-E3 being compatible with digital signaling formats, the DACT-E3 features numerous formats for communication to a central station. As a digital communicator, the DACT-E3 complies with FCC Part 8, Telecommunication Standards for DC and AC Ringer Equivalence. Digital Alarm Communicator Transmitter DACT-E3 Features * Listed under UL Standard 864, 9th Edition * Communicates with the E3, ILI-MB-E3 sub-assembly via RS-485 * Communicates in a variety of formats * Transmits and verifies data to the central station * Offers pre-programmed dialing to the central station phone number * Performs on and off-hook status to the phone lines * Traces proper central station "ACK" and "Kiss-off" tone * Activates hang-up and release phone lines Installation Instructions The DACT-E3 is adaptable for installation in standard E3 Series(R) System cabinets. Typically, the DACT-E3 module mounts on standoffs on top of the left side of the ILI-MB-E3 module. Either unit can be easily connected to the backbox or sub-assembly plate depending on the cabinet module. Note: For instructions on installing the DACT-E3, refer to the E3 Series(R) Expandable Emergency Evacuation Installation/Operating Manual, Part Number: 9020-0574 or the DACT-E3 Installation Instructions Part Number:9000-0580. Specifications Operating Voltage: 24 VDC (from PM-9 power supply) Operating Current: 0.018 amp. Alarm Current: 0.018 amp. Operating Temperature: 32 to 120 F (0 to 49 C) Relative Humidity: 0 to 93%, non-condensing at 90 F (32 C) E3 Series(R) and NetSOLO(R) are registered trademarks of Honeywell International Inc. Ordering Information Model DACT-E3 Description Digital alarm communicator transmitter An ISO 9000-2000 Company SIGNALING FM APPROVED MEA Approved City of Chicago Approved Class 1 Class 2 High Rise S1869 3025415 231-06-E 7165-0694:268 7165-0694:269 City of Denver Approved GAMEWELL-FCI Specifications are for information only, are not intended for installation purposes, and are subject to change without notice. No responsibility is assumed by Gamewell-FCI for their use. www.gamewell-fci.com 9020-0610 Rev. e1 page 1 of 1 (c)2007 by Honeywell International Inc. All rights reserved. 12 Clintonville Road, Northford, CT 06472-1610 USA * Tel: (203) 484-7161 * Fax: (203) 484-7118 |
Price & Availability of DACT-E3
 |
|
|
|
|
All Rights Reserved © IC-ON-LINE 2003 - 2022 |
| [Add Bookmark] [Contact Us] [Link exchange] [Privacy policy] |
|
Mirror Sites : [www.datasheet.hk]
[www.maxim4u.com] [www.ic-on-line.cn]
[www.ic-on-line.com] [www.ic-on-line.net]
[www.alldatasheet.com.cn]
[www.gdcy.com]
[www.gdcy.net] |