 |
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
| Datasheet File OCR Text: |
| (R) Model 6702A HDTV, 75 Ohm BNC Connector for RG-59/U Features: Connectors are precision machined (not die-cast) from brass. Black nickel plating is applied for easily identification as a high definition connector. Insulator material is high density PTFE to maintain a perfect dielectric constant. Connectors utilize gold plated contact pin to maintain low return loss in high definition applications. Connector is precision matched to Belden (R) 1505A cable, a precision RG-59/U video coax cable for analog and digital SDI/HDTV applications Connectors use standard commercial die set, size: 0.324"/0.255"/0.068" HEX and 0.052"/0.042" SQ (e.g. model 2649 from Paladin Tools) Materials: Connector Body Crimp Ferrule Outer Contact Male Contact Pin Insulator Ratings: Impedance: Frequency: VSWR: Insertion Loss: Leakage Loss: Contact Resistance: Voltage Insulation Resistance: Insertions: Cable Retention: Temperature: Black nickel plated brass Nickel plated annealed copper Nickel plated brass Gold plated brass Polytetrafluorethylene (PTFE) 75 ohms 0 to 3 GHz. 1.3 max 0.2 db (@ 3GHz.) -55 db (@ 3GHz.) 3 Milliohms *500 V 5,000 Megohms 500 60 lbs. -55 to +199 C *Hands free testing in controlled voltage environment; For CE compliance: not intended for hand held use at voltages above 33Vms/70 Vdc All dimensions are in inches. Tolerances (except noted): .xx = .02 (,51 mm), .xxx = .005 (,127 mm). All specifications are to the latest revisions. Specifications are subject to change without notice. Registered trademarks are the property of their respective companies. Made in USA Sales: 800-490-2361 Fax: 888-403-3360 Technical Assistance: 800-241-2060 For Where to Buy information, visit the Pomona web site at www.pomonaelectronics.com Rev: 004 D1099632 Page 1 of (R) Model 6702A HDTV, 75 Ohm BNC Connector for RG-59/U Use standard commercial die set, size: 0.324"/0.255"/0.068" HEX and 0.052"/0.042" SQ (e.g. model 2649 from Paladin Tools) All dimensions are in inches. Tolerances (except noted): .xx = .02 (,51 mm), .xxx = .005 (,127 mm). All specifications are to the latest revisions. Specifications are subject to change without notice. Registered trademarks are the property of their respective companies. Made in USA Sales: 800-490-2361 Fax: 888-403-3360 Technical Assistance: 800-241-2060 For Where to Buy information, visit the Pomona web site at www.pomonaelectronics.com Rev: 004 D1099632 Page 2 of |
Price & Availability of 6702A
 |
|
|
|
|
All Rights Reserved © IC-ON-LINE 2003 - 2022 |
| [Add Bookmark] [Contact Us] [Link exchange] [Privacy policy] |
|
Mirror Sites : [www.datasheet.hk]
[www.maxim4u.com] [www.ic-on-line.cn]
[www.ic-on-line.com] [www.ic-on-line.net]
[www.alldatasheet.com.cn]
[www.gdcy.com]
[www.gdcy.net] |