 |
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
| Datasheet File OCR Text: |
| Marketing Bulletin DATE: TO: FROM: RE: June 23rd, 2006 All Sales Personnel Mark Stoner Product Termination To all concerned parties, This bulletin is to notify all customers of the discontinuation of the following Ecliptek series effective July 1st, 2006: Series EC3SM1 EC4SM1 Description Four pad SMD Crystal Four pad SMD Crystal Recommended Replacement EC3SM EC4SM In compliance with our End of Life (EOL) policy, this will serve as advanced notice of product termination. New orders will not be accepted after September 31st, 2006, with delivery to conclude by December 31st 2006. If there are any questions pertaining to this bulletin, please fell free to contact me. Thank you again for your cooperation. Best Regards, Mark W. Stoner Vice President of Marketing Ecliptek Corporation 3545 CADILLAC AVENUE * COSTA MESA, CA 92626-1401 * (714) 433-1200 * Fax (714) 433-1234 EC4SM1 Series * Four pad surface mount package * AT or BT cut available * Resistance weld seal * Tight tolerance/stability * Interchangeable with plastic surface mount crystals * Tape and reel available NOTES EC4SM1 H 5.18 L 12.50 W 4.95 CRYSTAL _____________________________________________________________________________________________________________________________________________________________________________________________ _____________________________________________________________________________________________________________________________________________________________________________________________ _____________________________________________________________________________________________________________________________________________________________________________________________ _____________________________________________________________________________________________________________________________________________________________________________________________ _____________________________________________________________________________________________________________________________________________________________________________________________ _____________________________________________________________________________________________________________________________________________________________________________________________ _____________________________________________________________________________________________________________________________________________________________________________________________ _____________________________________________________________________________________________________________________________________________________________________________________________ OBSOLETE _____________________________________________________________________________________________________________________________________________________________________________________________ _____________________________________________________________________________________________________________________________________________________________________________________________ _____________________________________________________________________________________________________________________________________________________________________________________________ _____________________________________________________________________________________________________________________________________________________________________________________________ _____________________________________________________________________________________________________________________________________________________________________________________________ ____________________________________________________________________________________________________________________________________________________________________________________________ _____________________________________________________________________________________________________________________________________________________________________________________________ _____________________________________________________________________________________________________________________________________________________________________________________________ _____________________________________________________________________________________________________________________________________________________________________________________________ _____________________________________________________________________________________________________________________________________________________________________________________________ ELECTRICAL SPECIFICATIONS Frequency Range Frequency Tolerance / Stability Over Operating Temperature Range Operating Temperature Range Aging (at 25C) Storage Temperature Range Shunt Capacitance Insulation Resistance Drive Level Load Capacitance (CL) 7.3728MHz, 20.000MHz, 30.000MHz, and 33.333MHz 50ppm / 100ppm (Standard), 30ppm / 50ppm (AT cut only), 15ppm / 30ppm (AT cut only), or 15ppm / 20ppm (AT cut only) 0C to 70C (Standard), -20C to 70C (AT cut only), or -40C to 85C (AT cut only) 5ppm / year Maximum -40C to 85C 7pF Maximum 500 Megaohms Minimum at 100VDC 1 mWatt Maximum 18pF (Standard), Custom CL 10pF, or Series Resonant EQUIVALENT SERIES RESISTANCE (ESR), MODE OF OPERATION (MODE), AND CUT Nominal Frequency 7.3728MHz 20.000MHz ESR () 120 Max 50 Max Mode / Cut Fundamental / AT Fundamental / AT Nominal Frequency 30.000MHz 33.333MHz ESR () 40 Max 40 Max Mode / Cut Fundamental / AT Fundamental / BT MANUFACTURER CATEGORY SERIES PACKAGE CLASS REV.DATE ECLIPTEK CORP. CRYSTAL EC4SM1 EPOXY BASE CR35 06/06 800-ECLIPTEK www.ecliptek.com for latest revision Specifications subject to change without notice. PART NUMBERING GUIDE EC4SM1 FREQUENCY TOLERANCE / STABILITY Blank=50ppm at 25C, 100ppm from 0C to 70C A=50ppm at 25C, 100ppm from -20C to 70C B=50ppm at 25C, 100ppm from -40C to 85C C=30ppm at 25C, 50ppm from 0C to 70C D=30ppm at 25C, 50ppm from -20C to 70C E=30ppm at 25C, 50ppm from -40C to 85C F=15ppm at 25C, 30ppm from 0C to 70C G=15ppm at 25C, 30ppm from -20C to 70C J=15ppm at 25C, 20ppm from 0C to 70C - B - 20 - 33.333M TR PACKAGING OPTIONS Blank=Bulk, TR=Tape and Reel FREQUENCY LOAD CAPACITANCE Blank=18pF (Standard), S=Series XX=XXpF (Custom) MODE OF OPERATION / CRYSTAL CUT Blank=Fundamental / AT B=Fundamental / BT OBSOLETE MECHANICAL DIMENSIONS ALL DIMENSIONS IN MILLIMETERS SUGGESTED SOLDER PAD LAYOUT ALL DIMENSIONS IN MILLIMETERS Coplanarity: 0.152 Maximum Tolerances = 0.2 TAPE AND REEL DIMENSIONS ALL DIMENSIONS IN MILLIMETERS TAPE A 24.3 B 11.5.1 C 10.75.1 D 4.1 E 2.1 REEL M 1.5 MIN N 50 MIN O 20.2 MIN P 13.2 Q 40 MIN QTY/REEL 1,000 F 12.1 G 5.4.1 H 1.5 +.1 J 12.5.1 K .4.05 L 5.35 0.2 R 2.5 MIN S 10 MIN T 30.4 MAX U 360 MAX V 24.4+2-0 *Compliant to EIA-481A ENVIRONMENTAL/MECHANICAL SPECIFICATIONS PARAMETER SPECIFICATION MARKING SPECIFICATIONS Fine Leak Test Gross Leak Test Mechanical Shock Vibration Solderability Temperature Cycling Resistance to Soldering Heat Resistance to Solvents MIL-STD-883, Method 1014, Condition A MIL-STD-883, Method 1014, Condition C MIL-STD-202, Method 213, Condition C MIL-STD-883, Method 2007, Condition A MIL-STD-883, Method 2002 MIL-STD-883, Method 1010 MIL-STD-883, Method 210 MIL-STD-883, Method 215 Line 1: E XX.XXX Frequency in MHz (5 Digits Maximum + Decimal) MANUFACTURER CATEGORY SERIES PACKAGE CLASS REV.DATE ECLIPTEK CORP. CRYSTAL EC4SM1 EPOXY BASE CR35 06/06 800-ECLIPTEK www.ecliptek.com for latest revision Specifications subject to change without notice. |
Price & Availability of EC4SM1-20-33333M
 |
|
|
|
|
All Rights Reserved © IC-ON-LINE 2003 - 2022 |
| [Add Bookmark] [Contact Us] [Link exchange] [Privacy policy] |
|
Mirror Sites : [www.datasheet.hk]
[www.maxim4u.com] [www.ic-on-line.cn]
[www.ic-on-line.com] [www.ic-on-line.net]
[www.alldatasheet.com.cn]
[www.gdcy.com]
[www.gdcy.net] |