View LP377THR1-70G-01-MT_4544149.PDF datasheet online --- IC-ON-LINE

Datasheet File OCR Text:

COTCO LUMINANT DEVICE (HUIZHOU) LTD.
SPECIFICATION FOR COTCO LED LAMP Document No: Model No : Rev. No: Date: SPE/LP377THR1-70G-01-MT LP377THR1-70G-01-MT 02 2005-09-15
Description: 70 Degree 7.6 x 7.6mm LED Lamp in High Red Color with Water Transparent Lens and Stopper *This specification is only for MT Dice Material: AlGaInP
Confirmed by Customer: Date:
ATTENTION
OBSERVE PRECAUTIONS ELECTROSTATIC SENSITIVE DEVICES
For part availability and ordering information please call Toll Free: 800.984.5337 Website: www.marktechopto.com | Email: info@marktechopto.com
Document No. SPE/LP377THR1-70G-01-MT Rev. No. 02 Applications: Dimension Drawing
-
Advertising Signs Indicators Automotive Lighting
Absolute Maximum Ratings at Ta = 25C Items
Forward Current*2 Peak Forward Current*1 Reverse Voltage Power Dissipation Operation Temperature Storage Temperature Lead Soldering Temperature
Symbol IF IFP VR PD Topr Tstg Tsol
Absolute maximum Rating 70 200 5 220 -40 ~ +100 -40 ~ +100
Unit mA mA V mW
C C
Max.260C for 5 sec Max.
(3mm from the base of the epoxy bulb)
*1 pulse width <=0.1msec duty <=1/10 *2 Heat sink is recommended to be adequated if the device is operated at ambient temperatures higher than 25 deg C. For long term performance the drive currents between 10mA and 50mA are recommended. Please contact COTCO sales representative for more information on recommended drive conditions.
Typical Electrical & Optical Characteristics ( Ta = 25C) ) Items Forward Voltage Reverse Current Dominant Wavelength Luminous Flux 50% Power Angle Symbol VF IR D V 21/2 Condition IF = 70mA VR = 5V IF = 70mA IF = 70mA IF = 70mA Min. ----620 3000 --Typ. 2.6 --628 4500 70 Max. 3.2 100 637 ----Unit V A nm mlm deg
2/4
Format #: COTCO-D-074
REV.3
Document No. SPE/LP377THR1-70G-01-MT Rev. No. 02 Standard bins for LP377THR1-70G-01-MT (IF = 70mA):
Lamps are sorted to Luminous Flux -V , VF & Dominant Wavelength -D bins shown. Orders for LP377THR1-70G-01-MT may be filled with any or all bins contained as below. All Luminous Flux -V , VF & Dominant Wavelength -D values shown and specified are at If=70mA.
* J+
L Luminous Flux (V)
K
J
620nm Dominant Wavelength (D)
637nm
Rank Luminous Flux
J 3000-4200 mlm
K 3500-4800 mlm
L 4000-6100 mlm
* J+ indicates Luminous Flux is at J bin or above.
Forward Voltage (VF) Rank Voltage V4 2.2-2.4V V5 2.4-2.6V V6 2.6-2.8V V7 2.8-3.0V V8 3.0-3.2 V
Important Notes:
1) All ranks will be included per delivery, rank ratio will be based on the Dices distribution. 2) No tolerance in the measurement of luminous flux. 3) Tolerance of measurement of dominant wavelength is 1nm. 4) Tolerance of measurement of Vf is 0.05 V. 5) Packaging methods are available for selection, please refer to PACKAGING STANDARD. 6) Please refer to LED LAMP RELIABILITY TEST STANDARD for reliability test conditions. 7) Please refer to APPLICATION NOTES for Application Notes.
3/4
Format #: COTCO-D-074
REV.3
Document No. SPE/LP377THR1-70G-01-MT Rev. No. 02
Graphs
1. Cathode PAD Area (0.18 x 0.18 x 2inch2) 2. Height above nominal seating plane in inches(0.3inch)
Items Prepared by Checked by Approved by FCN#
Signatures
LiuZM Aldosin David
Date
2005-09-15 2005-09-15 2005-09-15 Rev. No 02 Date
Revision History
Change Description
2005-09-15 Correct FIG.6 from 120deg to 70deg.
FCN20050297
Data is subject to change without prior notice. Copyright@2002 Cotco International Ltd.
4/4
Format #: COTCO-D-074
REV.3

▲Up To Search▲

Price & Availability of LP377THR1-70G-01-MT

	To Download LP377THR1-70G-01-MT Datasheet File
If you can't view the Datasheet, Please click here to try to view without PDF Reader .