JRC0428
Page 1 of 2
These lamps are miniature lens type designed for surface mounting. The high intensity is achieved by molding a focusing lens onto the substrate. These lamps measure approximately 2.4 x 3.2 mm.
Chip PART NO. Material JRC0428 AlGaInP Emitted Color Hyper Red Water Clear Lens Color
* Specifications subject to change without notice. Dimensions are in mm0.1 unless stated otherwise. IDEA, Inc., 1351 Titan Way, Brea, CA 92821 Ph:714-525-3302, 800-LED-IDEA; Fax: 714-525-3304 0507
JRC0428
Page 2 of 2
Absolute Maximum Ratings at Ta = 25 C Parameter Forward Current Operating Temperature Storage Temperature Soldering Temperature Power Dissipation Peak Forward Current (Duty 1/10 @ 1KHz) Reverse Voltage Electronic Optical Characteristics Parameter Symbol JRC0428 Luminous Intensity IV JRC0428-3 JRC0428-5 JRC0428-6 Viewing Angle Peak Wavelength Dominant Wavelength Spectrum Radiation Bandwidth Forward Voltage Reverse Current 21/2 p d VF IR Min. 99 230 381 460 -- -- -- -- -- -- Typ. 240 345 585 707 30 632 624 20 2.0 -- -- -- -- -- 2.4 10 deg nm nm nm V A IF = 20 mA IF = 20 mA IF = 20 mA IF = 20 mA IF = 20 mA VR = 5 V -- mcd IF = 20 mA Max. Units Condition Symbol IF Topr Tstg Tsol Pd IF (Peak) VR Rating 30 -40 to +85 -40 to +90 260 (for 5 seconds) 60 160 5 Units mA C C C mW mA V
* Specifications subject to change without notice. Dimensions are in mm0.1 unless stated otherwise. IDEA, Inc., 1351 Titan Way, Brea, CA 92821 Ph:714-525-3302, 800-LED-IDEA; Fax: 714-525-3304 0507
|
