Part Number Hot Search : 
74ALVC CM7346 M30302M OP603V CEER3010 C720018 C566B 71B1333K
Product Description
Full Text Search
 

To Download HDMIF389A5DC Datasheet File

  If you can't view the Datasheet, Please click here to try to view without PDF Reader .  
 
 


  Datasheet File OCR Text:
  SPEC NO :
SPECIFICATION
CUSTOMER PRODUCT MODEL NO PREPARED APPROVED SAW FILTER HDMIF389A5DC SIP5Dc CHECKED D A T E 2008-5-13
CUSTOMER RECEIVED:
CHECKED
APPROVED
DATE
Shoulder Electronics Limited
www.shoulder.cn
Tel:0755-82916880
Fax:0755-82916881
E-mail:info@shoulder.cn
Page 1 of 11
SAW FILTER
HDMIF389A5DC
SIP5Dc
History Record
Date Spec. No. Part No. Customer No. Modify Content Remark
www.shoulder.cn
Tel:0755-82916880
Fax:0755-82916881
E-mail:info@shoulder.cn
Page 2 of 11
SAW FILTER 1.SCOPE
HDMIF389A5DC
SIP5Dc
SHOULDER's SAW filter series have broad line up products meeting all broadcast standard including NTSC,PAL and SECAM systems. These filters are composed of two interdigital transducers on a single-crystal. piezoelectrical chip. they are used in electronic equipments such as TV and so on.
2.Construction
2.1 Dimension and materials Manufacturer's name : SHOULDER ELECTRONICS Co. LTD(CHINA) Type : MIF389A5Dc
1. Input 2. Switching Input 3. Chip carrier - ground 4. Output 5. Output
YY:year WW:week
www.shoulder.cn
Tel:0755-82916880
Fax:0755-82916881
E-mail:info@shoulder.cn
Page 3 of 11
SAW FILTER
2.2. Circuit construction, measurement circuit
HDMIF389A5DC
SIP5Dc
3.Characteristics
Items Standard atmospheric conditions Conditions Unless otherwise specified , the standard rang of atmospheric conditions for making measurements and tests is as follows; Ambient temperature : 15 to 35 Relative humidity : 25% to 85% Air pressure : 86kPa to 106kPa Operating temperature rang is the rang of ambient temperatures in which the filter can be operated continuously. -20 ~ +60 Storage temperature rang is the rang of ambient temperatures at which the filter can be stored without damage. Conditions are as specified elsewhere in these specifications. -40 ~ +70 +25 Specifications
Operating temperature rang Storage temperature rang
There shall be no damage.
Reference temperature
3.1 Maximum Rating DC voltage AC voltage VDC Vpp 12 10 V V Between any terminals
www.shoulder.cn
Tel:0755-82916880
Fax:0755-82916881
E-mail:info@shoulder.cn
Page 4 of 11
SAW FILTER
3.2 Electrical Characteristics
HDMIF389A5DC
SIP5Dc
Characteristics in B/G, D /K mode (switching input pin 2 connected to ground pin 3 )
Source impedance Load impedance Item Insertion attenuation Reference level
Zs=50 ZL=2k//3pF Freq 37.40MHz
min 15.2 4.2 0.5 11.9 12.1 42.0 21.0 41.0 37.0 35.0 34.0
typ 17.2 5.7 2.0 13.9 17.7 14.1 58.0 28.0 54.0 48.0 45.0 41.0 -72
TA=25 max 19.2 7.2 3.5 15.9 16.1 dB dB dB dB dB dB dB dB dB dB dB dB ppm/k
38.90MHz 34.47MHz 32.40MHz 32.10MHz Relative attenuation 33.40MHz 30.90MHz 31.90MHz 40.40MHz 41.40MHz 25.00~30.90MHz Sidelobe 40.40~45.00MHz Temperature coefficient
Characteristics in M/N mode (switching input pin 2 connected to input pin 1 )
Source impedance Load impedance Item Insertion attenuation Reference level
Zs=50 ZL=2k//3pF Freq 37.40MHz
min 15.0 4.6 0.1 16.0 40.0 40.0 35.0 32.0
Typ 17.0 6.1 1.6 18.0 49.0 47.0 42.0 39.0 -72
TA=25 max 19.0 7.6 3.1 20.0 dB dB dB dB dB dB dB dB ppm/k
38.90MHz 35.32MHz Relative attenuation 34.40MHz 32.90MHz 40.40MHz 25.00~32.90MHz Sidelobe 40.40~45.00MHz Temperature coefficient
3.3 Environmental Performance Characteristics Item High temperature
www.shoulder.cn
Condition The specimen shall be store at a temperature of 802 for 964h. Then it shall be subjected to standard atmospheric conditions for 1h, after
Fax:0755-82916881 E-mail:info@shoulder.cn
Specifications
Tel:0755-82916880
Page 5 of 11
SAW FILTER
HDMIF389A5DC
which measurement shall be made within 1h. The specimen shall be store at a temperature of -203 for 964h. Then it shall be subjected to standard atmospheric conditions for 1h, after which measurement shall be made within 1h. The specimen shall be store at a temperature of 402 with relative humidity of 90% to 96% for 964h. Then it shall be subjected to standard atmospheric conditions for 1h, after which measurement shall be made within 1h. The specimen shall be subjected to 8 continuous cycles each as shown below. Then it shall be subjected to standard atmospheric conditions for 1h, after which measurement shall be made within 1h. Temperature Duration 1 +25 =>-40 0.5h 2 -40 4h 3 -40 =>+85 2h 4 +85 4h 5 +85 =>+25 0.5h 6 +25 1h Reflow soldering method Peak: 255 5 , 220 5 , 40s At electrode temperature of the specimen.
SIP5Dc
Low temperature
Humidity
Thermal shock
Resistance to Soldering heat
Mechanical characteristics and specifications in electrical characteristics shall be satisfied. There shall be no excessive change in appearance.
The specimen shall be passed through the reflow furnace with the condition shown in the above profile for 1 time. The specimen shall be stored at standard atmospheric conditions for 1h, after which the
www.shoulder.cn Tel:0755-82916880 Fax:0755-82916881 E-mail:info@shoulder.cn
Page 6 of 11
SAW FILTER
HDMIF389A5DC
SIP5Dc
Solder ability
measurement shall be made. Test board shall be 1.6 mm thick. Base material shall be glass fabric base epoxy resin. Immerse the pins melt solder at 260+5/-0 More then 95% of for 5 sec. total area of the pins should be covered with solder 95%
3.4 Mechanical Test Items Conditions Vibration 600-3300rpm amplitude 1.5mm 3 directions 2 H each Drop On maple plate from 1 m high 3 times Lead pull Pull with 1 kg force for 30 seconds Lead bend 90o bending with 500g weigh 2 times
Specifications There shall be no damage.
3.5 Voltage Discharge Test Item Condition Surge Between any two electrode
Specifications
There shall be no damage
www.shoulder.cn
Tel:0755-82916880
Fax:0755-82916881
E-mail:info@shoulder.cn
Page 7 of 11
SAW FILTER
3.6 Frequency response Frequency response in D/K, B/G mode
HDMIF389A5DC
SIP5Dc
www.shoulder.cn
Tel:0755-82916880
Fax:0755-82916881
E-mail:info@shoulder.cn
Page 8 of 11
SAW FILTER
HDMIF389A5DC
SIP5Dc
www.shoulder.cn
Tel:0755-82916880
Fax:0755-82916881
E-mail:info@shoulder.cn
Page 9 of 11
SAW FILTER
Frequency response in M/N mode
HDMIF389A5DC
SIP5Dc
www.shoulder.cn
Tel:0755-82916880
Fax:0755-82916881
E-mail:info@shoulder.cn
Page 10 of 11
SAW FILTER
HDMIF389A5DC
SIP5Dc
www.shoulder.cn
Tel:0755-82916880
Fax:0755-82916881
E-mail:info@shoulder.cn
Page 11 of 11


▲Up To Search▲   

 
Price & Availability of HDMIF389A5DC

All Rights Reserved © IC-ON-LINE 2003 - 2022  

[Add Bookmark] [Contact Us] [Link exchange] [Privacy policy]
Mirror Sites :  [www.datasheet.hk]   [www.maxim4u.com]  [www.ic-on-line.cn] [www.ic-on-line.com] [www.ic-on-line.net] [www.alldatasheet.com.cn] [www.gdcy.com]  [www.gdcy.net]


 . . . . .
  We use cookies to deliver the best possible web experience and assist with our advertising efforts. By continuing to use this site, you consent to the use of cookies. For more information on cookies, please take a look at our Privacy Policy. X