View AO-12864TFIQW-00H-A_4523811.PDF datasheet online --- IC-ON-LINE

Datasheet File OCR Text:

A MP I R E
SPECIFICATIONS FOR LCD MODULE
CUSTOMER CUSTOMER PART NO. AMPIRE PART NO. APPROVED DATE
Approved For Specifications
Approved For Specifications & Sample
AO-12864TFIQW-00H-A(R)
BY
APPROVED BY
CHECKED BY
ORGANIZED BY
Date : 2007/5/3
AMPIRE CO., LTD.
1
RECORD
Revision Date Page 2007/5/3 -New Release
OF REVISION
Contents Editor Tony
Date : 2007/5/3
AMPIRE CO., LTD.
2
1
FEATURES
(1) Display format : 128x64 dots, 1/64 duty, 1/9 bias. (2) Construction : LCD panel , COG and FPC, White LED Back-light. (3) Display type : FSTN, Transflective, 6 o'clock view (4) Controller : ST7565 (5) Extend temperature type. (6) ROHS compliant.
2
MECHANICAL DATA
Parameter Dot size Dot pitch Active area Viewing area Module size Stand Value 0.355(W) x 0.355(H) 0.38(W) x 0.38(H) 48.615(W) x24.295 (H) 52.6 (W) x27.5 (H) 59.0(W) x 65.4(H) x 7.2(T) Unit mm mm mm mm mm
3
ABSOLUTE MAXIMUM RATINGS
Parameter Logic Circuit Supply Voltage LCD Driving Voltage Input Voltage Operating Temp. Storage Temp. Symbol VDD-VSS VLCD VI TOP TSTG Min -0.3 -18.0 -0.3 -20 -30 Max +7.0 +0.3 VDD+0.3 70 80 Unit V V V C C
Date : 2007/5/3
AMPIRE CO., LTD.
3
4
ELECTRO-OPTICAL CHARACTERISTICS
Parameter Logic Circuit Supply Voltage LCD Driving Voltage (STN ) Input Voltage Logic Supply Current Contrast Rise Time Fall Time Viewing Angle Range Symbol VDD-VSS VLCD Condition --20 C 25 C 70 C VIH VIL IDD --VDD=3.3V Min -10.2 9.9 9.6 0.8VDD -0 -Typ 3.3 11.2 10.9 10.6 --0.3 Max -12.2 11.9 11.6 VDD 0.2 VDD 0.5 V V mA Unit V V Note
----- Electronic Characteristics -----
----- Optical Characteristics ( FSTN ) ----CR tr tf f b l r Frame Frequency Parameter Forward Voltage fF Symbol VF 25C Condition IF=45mA -25C 25C 25C & CR2 2 -------Min -5 305 120 40 35 35 35 64 Typ 3.2 Note 1 450 180 -----Max 3.5 Hz Unit V Note Supply Voltage between A&K Note 5 Note 4 Note 4 Note 6 Deg. ms ms Note 3 Note 2
----- White LED Back-light Characteristics -----
Forward Current LCM Luminous intensity LED C.I.E
IF
-IF=45mA
--0.26 0.27
45 18 0.30 0.31
60 -0.34 0.35
mA cd/m2
X Y
IF=45mA IF=45mA
(NOTE 4) Luminous intensity is decided from forward current of the White LED. (NOTE 5) The Luminous Intensity depends on IF (NOTE 6) White LEDs are with color tolerance
Date : 2007/5/3
AMPIRE CO., LTD.
4
* LED Dice number = 3
(NOTE 1) Contrast ratio : CR = (Brightness in OFF state) / (Brightness in ON state) ( NOTE 2 ) Response time :
(NOTE 3) Viewing angle
Date : 2007/5/3
AMPIRE CO., LTD.
5
5
BLOCK DIAGRAM & POWER SUPPLY
One LED
Date : 2007/5/3
AMPIRE CO., LTD.
6
Date : 2007/5/3
AMPIRE CO., LTD.
7
6
INTERFACE
No. 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 Symbol P/S C86 VDD VR V5 V4 V3 V2 V1 C2+ C2C1C1+ C3VOUT VSS VDD D7 D6 D5 D4 D3 D2 D1 D0 RD(E) Function Serial or interface selection terminal MPU interface type selection terminal. Power supply for logic (VDD=+3v) Voltage adjust terminal.
LCD driver supply voltage VDD (=V0) > V1 > V2 > V3 > V4 > V5
Used to voltage booster according to the boosting ratio.
Voltage converter output Ground (0V) Power supply for logic (VDD=+3v) Serial input data (SDA) Serial input clock (SCK) When the serial interface selected (P/S="L"), 8-bit data bus DB0~DB5 : high impedance
27 28 29 30
WR(R/W) A0 RES CS1
68 Type : Enable signal of 68 type MPU input terminal. 80 Type : D0 to D7 terminals are output 68 Type : read/write control signal of 68 type MPU input terminal. 80 Type : Data on the data bus input synchronizing the rise edge of this signal. Connector to the address bus of MPU. Reset terminal. Chip select terminal.
Date : 2007/5/3
AMPIRE CO., LTD.
8
.7 TIMING CHARACTERISTICS
8080-SYSTEM
Parameter 8080 Series(VDD=2.7~ 4.5V) Address Hold Time(A0) Address Setup Time(A0) System Cycle Time((A0) Control L Pulse Width(/WR) Control L Pulse Width(/RD) Control H Pulse Width(/WR) Control H Pulse Width(/RD) Data Setup Time(D0~7) Address Hold Time /RD access time Output Disable Time
Symbol tAH8 tAW8 Tcyc8 tCCLW tCCLR tCCHW tCCHR tDS8 tDH8 tACC8 tOH8
Min. 0 0 300 60 120 60 60 40 15 10
Typ.
Max. -
Unit ns ns ns ns ns ns ns ns ns
140 100
ns ns
Date : 2007/5/3
AMPIRE CO., LTD.
9
8.
QUALITY AND RELIABILITY
8.1TEST CONDITIONS
Tests should be conducted under the following conditions : Ambient temperature : 25 5C Humidity : 60 25% RH.
8.2 SAMPLING PLAN
Sampling method shall be in accordance with MIL-STD-105E , level II, normal single sampling plan .
8.3ACCEPTABLE QUALITY LEVEL
A major defect is defined as one that could cause failure to or materially reduce the usability of the unit for its intended purpose. A minor defect is one that does not materially reduce the usability of the unit for its intended purpose or is an infringement from established standards and has no significant bearing on its effective use or operation.
8.4 APPEARANCE
An appearance test should be conducted by human sight at approximately 30 cm distance from the LCD module under flourescent light. The inspection area of LCD panel shall be within the range of following limits.
Date : 2007/5/3
AMPIRE CO., LTD.
10
9. INSPECTION QUALITY CRITERIA
Item Function Dimension Black spots Description of defects Class of Defects Major Major Minor Acceptable level (%) 0.65 1.5 2.5
Black lines
Bubbles in polarizer Color uniformity Glass Scratches Contrast ratio Response time Viewing angle
Short circuit or Pattern cut Deviation from drawings Ave . dia . D area A area B Disregard D0.2 3 4 0.2 0.5 for N = 1 Rainbow color or newton ring. Obvious visible damage. See note 1 See note 2 See note 3
Minor
2.5
Minor Minor Minor Minor Minor Minor
2.5 2.5 2.5 2.5 2.5 2.5
Zone A active area Zone B viewing area
Date : 2007/5/3
AMPIRE CO., LTD.
11
10 RELIABILITY
Test Conditions Test Item High Temperature Operation Low Temperature Operation High Temperature Storage Low Temperature Storage Thermal Shock Test Humidity Test Extend Temp. type 703C , t=96 hrs -203C , t=96 hrs 803C , t=96 hrs -303C , t=96 hrs -30C ~ 25C ~ 80C 30 m in. 5 min. 30 min. ( 1 cycle ) Total 5 cycle 40 C, Humidity 90%, 96 hrs 1,2 1,2 1,2 1,2 Note
Sweep frequency : 10 ~ 55 ~ 10 Hz/1min Amplitude : 0.75mm Vibration Test (Packing) 2 Test direction : X.Y.Z/3 axis Duration : 30min/each axis Note 1 : Condensation of water is not permitted on the module. Note 2 : The module should be inspected after 1 hour storage in normal conditions (15-35C , 45-65%RH). Definitions of life end point : Current drain should be smaller than the specific value. Function of the module should be maintained. Appearance and display quality should not have degraded noticeably. Contrast ratio should be greater than 50% of the initial value.
Date : 2007/5/3
AMPIRE CO., LTD.
12
11 HANDLING PRECAUTIONS
(1) A LCD module is a fragile item and should not be subjected to strong mechanical shocks. (2) Avoid applying pressure to the module surface. This will distort the glass and cause a change in color. (3) Under no circumstances should the position of the bezel tabs or their shape be modified. (4) Do not modify the display PCB in either shape or positioning of components. (5) Do not modify or move location of the zebra or heat seal connectors. (6) The device should only be soldered to during interfacing. Modification to other areas of the board should not be carried out. (7) In the event of LCD breakage and resultant leakage of fluid do not inhale, ingest or make contact with the skin. If contact is made rinse immediately. (8) When cleaning the module use a soft damp cloth with a mild solvent, such as Isopropyl or Ethyl alcohol. The use of water, ketone or aromatic is not permitted. (9) Prior to initial power up input signals should not be applied. (10) Protect the module against static electricity and observe appropriate anti-static precautions.
Date : 2007/5/3
AMPIRE CO., LTD.
13
12 OUTLINE DIMENSION
Date : 2007/5/3
AMPIRE CO., LTD.
14
Date : 2007/5/3
AMPIRE CO., LTD.

15

▲Up To Search▲

Price & Availability of AO-12864TFIQW-00H-A

	To Download AO-12864TFIQW-00H-A Datasheet File
If you can't view the Datasheet, Please click here to try to view without PDF Reader .