 |
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
| Datasheet File OCR Text: |
| Rev A DTIPU30 Series Single Output Up to 30 Watts AC/DC Desktop Power Supply FEATURES APPLICATIONS Splash Proof Scanners 100% Burn-in LCD Monitors Class I Insulation Thermal Printers IEC-320-C14 Input Inlet Humidity Temperature Meters Optional Output Connectors Available Over Voltage Protection (Crowbar Design) -20C ~ +70C Operating Temperature Range Wide Input Voltage Range: 90 to 264VAC, 47~63Hz Input Surge Current, Over Voltage, and Over Load Protection DESCRIPTION The DTIPU30 series of AC/DC desktop switching mode power supplies provide up to 30 watts of continuous output power. All models have a single output, universal input voltage range, and an operating temperature range of -20C ~ +70C. These supplies are also protected against input surge current, over voltage, and over load conditions. All supplies are also UL 94V-1 compliant and include an IEC-320-C14 input connector for worldwide applications. All models meet FCC-Part-15 class B and CISPR-22 class B emission limits and are designed to comply with UL/c-UL (UL 60950-1), TUV/GS (EN 60950-1), and new CE requirements. These supplies are 100% burn-in tested. SPECIFICATIONS: DTIPU30 Series All specifications are based on 25C, Nominal Input Voltage, and Maximum Output Current unless otherwise noted. We reserve the right to change specifications based on technological advances. SPECIFICATION INPUT (Vin) Operating Voltage Range Input Frequency Input Current (Low Line) Input Current (High Line) Inrush Current (Low Line) Inrush Current (High Line) Safety Ground Leakage Current Start-Up Time OUTPUT (Vo) Output Voltage Load Regulation Line Regulation Output Power Output Current *Ripple & Noise (peak to peak) Transient Response Time Hold-Up Time Temperature Coefficient PROTECTION Over Voltage Protection Over Current Protection GENERAL Efficiency Dielectric Withstanding Voltage For Primary to Secondary Dielectric Withstanding Voltage For Primary to Ground Isolation Resistance ENVIRONMENTAL Operating Temperature Storage Temperature Relative Humidity MTBF PHYSICAL Weight Dimensions (L x W x H) Warranty SAFETY EMI Requirements for CISPR-22 EMI Requirements for FCC PART-15 TEST CONDITIONS Min 90 47 Nom Max 264 63 0.8 0.5 15 30 0.75 2 Unit VAC Hz A A A A mA s VDC % % W A % ms ms %/C % % % VDC VDC M Io = Full Load, Vin = 115VAC Io = Full Load, Vin = 230VAC Io = Full Load, 25C, Cool Start, Vin = 115VAC Io = Full Load, 25C, Cool Start, Vin = 230VAC Io = Full Load, Vin = 240VAC Io = Full Load, Vin = 100VAC Vin = 230VAC Io = Full Load Vin = 90 to 264VAC Full Load, Vin = 90VAC Io = Full Load to Half Load, Vin = 100VAC Io = Full Load, Vin = 100VAC All Outputs 0.3 12 26 0.5 1 See Rating Chart 3 7 0.5 1 0 30 See Rating Chart 0.5 1 4 12 -0.04 +0.04 112 110 132 150 75 85 Io = Full Load, Vin = 230VAC Primary to Secondary Primary to Ground Test Voltage = 500VDC Derates linearly from 100% Load at 40C to 50% load at 70C Operating Temperature at 25C, Calculated per MIL-HDBK-217F 65 4242 2121 50 -20 -40 5 +70 +85 95 100,000 hours C C % Approximately 265 ~ 280 grams 4.65 x 2.05 x 1.36 inches 118.0 x 52.0 x 34.5 mm 2 years Vin = 220VAC Vin = 110VAC B B Class Class *Note: The Ripple & Noise for output voltages under 3.3VDC is 2% max. Wall Industries, Inc. 5 Watson Brook Road Exeter, NH 03833 603-778-2300 www.wallindustries.com Fax 603-778-9797 Rev A DTIPU30 Series Single Output Up to 30 Watts AC/DC Desktop Power Supply OUTPUT VOLTAGE / CURRENT RATING CHART Model Number *DTIPU30-101 *DTIPU30-102 DTIPU30-103 DTIPU30-104 DTIPU30-105 DTIPU30-106 DTIPU30-107 DTIPU30-108 DTIPU30-109 DTIPU30-110 DTIPU30-111 Input Current 90 ~ 264VAC 90 ~ 264VAC 90 ~ 264VAC 90 ~ 264VAC 90 ~ 264VAC 90 ~ 264VAC 90 ~ 264VAC 90 ~ 264VAC 90 ~ 264VAC 90 ~ 264VAC 90 ~ 264VAC Preset Voltage Output Voltage Range 5 VDC 6 VDC 8 VDC 11 VDC 13 VDC 16 VDC 21 VDC 27 VDC 33 VDC 40 VDC 50 VDC 3 ~ 5 VDC 5 ~ 6 VDC 6 ~ 8 VDC 8 ~ 11 VDC 11 ~ 13 VDC 13 ~ 16 VDC 16 ~ 21 VDC 21 ~ 27 VDC 27 ~ 33 VDC 33 ~ 40 VDC 40 ~ 50 VDC Output Current 5.00 A max 5.00 ~ 4.16 A 4.16 ~ 3.12 A 3.75 ~ 2.72 A 2.72 ~ 2.30 A 2.30 ~ 1.87 A 1.87 ~ 1.42 A 1.42 ~ 1.11 A 1.11 ~ 0.90 A 0.90 ~ 0.75 A 0.75 ~ 0.60 A Total Regulation(3) Output Power 7% 5% 5% 5% 5% 5% 5% 5% 5% 3% 3% 20W 25W 25W 30W 30W 30W 30W 30W 30W 30W 30W NOTES 1. For single output models the output voltage is specified as a range (Ex: 40 ~ 50VDC); the preset voltage will be set as standard models if nothing different is requested. Please contact factory for ordering details. 2. The " * " symbol means PSE approval. 3. Models 101~102 need to use AWG#16/4FT output cable in order to meet the total regulation. Models 103~111 need to use AWG#18/6FT output cable in order to meet the total regulation. 4. Optional output connectors are available. Please call factory for ordering details. MECHANICAL DRAWING Unit: inches [mm] Wall Industries, Inc. 5 Watson Brook Road Exeter, NH 03833 603-778-2300 www.wallindustries.com Fax 603-778-9797 |
Price & Availability of DTIPU30-101
 |
|
|
|
|
All Rights Reserved © IC-ON-LINE 2003 - 2022 |
| [Add Bookmark] [Contact Us] [Link exchange] [Privacy policy] |
|
Mirror Sites : [www.datasheet.hk]
[www.maxim4u.com] [www.ic-on-line.cn]
[www.ic-on-line.com] [www.ic-on-line.net]
[www.alldatasheet.com.cn]
[www.gdcy.com]
[www.gdcy.net] |