|
If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
Datasheet File OCR Text: |
SMD 8 Pin Single Output TTL Compatible Active Delay Lines TIME DELAY (ns) 5% or 2 nS 5 10 12 15 20 25 30 35 40 45 Whichever is greater. PART NUMBER EPA426-5 EPA426-10 EPA426-12 EPA426-15 EPA426-20 EPA426-25 EPA426-30 EPA426-35 EPA426-40 EPA426-45 TIME DELAY (ns) 5% or 2 nS 50 60 75 100 125 150 175 200 225 250 PART NUMBER EPA426-50 EPA426-60 EPA426-75 EPA426-100 EPA426-125 EPA426-150 EPA426-175 EPA426-200 EPA426-225 EPA426-250 Delay Times referenced from input to leading edges at 25C, 5.0V, with no load. DC Electrical Characteristics Parameter Test Conditions VCC = min. VIL = max. I OH = max VCC = min. VIH = min. I OL= max VCC = min. II = IIK VCC = max. VIN = 2.7V VCC = max. VIN = 5.25V IIL Low-Level Input Current VCC = max. VIN = 0.5V IOS Short Circuit Output Current VCC = max. VOUT = 0. ICCH High-Level Supply Current VCC = max. VIN = OPEN ICCL Low-Level Supply Current VCC = max. VIN = 0 TRO Output Rise Time Td 500 nS (0.75 to 2.4 Volts) NH Fanout High-Level Output VCC = max. VOH = 2.7V NL Fanout Low-Level Output VCC = max. VOL = 0.5V VOH VOL VIK IIH High-Level Output Voltage Low-Level Output Voltage Input Clamp Voltage High-Level Input Current Schematic Min Max Unit 2.7 V 0.5 V -1.2 V 50 A 1.0 mA -2 mA -100 mA 75 mA 75 mA 4 nS 20 TTL LOAD 10 TTL LOAD 8 VCC 5 OUTPUT INPUT 1 -40 4 GROUND Recommended Operating Conditions VCC VIH VIL IIK IOH IOL PW* d* TA Supply Voltage High-Level Input Voltage Low-Level Input Voltage Input Clamp Current High-Level Output Current Low-Level Output Current Pulse Width of Total Delay Duty Cycle Operating Free-Air Temperature Package Dimensions Min 4.75 2.0 Max 5.25 0.8 -18 -1.0 20 Unit V V V mA mA mA % % C .420 Max. PCA EPA426-5 D.C. .300 .500 Max. .280 Max. 40 0 40 +70 *These two values are inter-dependent. .250 Max. .02 .01 Typ. .050 .300 Input Pulse Test Conditions @ 25 C EIN PW TRI PRR VCC Pulse Input Voltage Pulse Width % of Total Delay Pulse Rise Time (0.75 - 2.4 Volts) Pulse Repetition Rate @ Td 200 nS Pulse Repetition Rate @ Td > 200 nS Supply Voltage 3.2 110 2.0 1.0 100 5.0 Unit Volts % nS MHz KHz Volts DSA426 Rev. A 2/5/96 QAF-CSO1 Rev. B 8/25/94 Unless Otherwise Noted Dimensions in Inches Tolerances: Fractional = 1/32 .XX = .030 .XXX = .010 ELECTRONICS INC. 16799 SCHOENBORN ST. NORTH HILLS, CA 91343 TEL: (818) 892-0761 FAX: (818) 894-5791 |
Price & Availability of EPA426-25 |
|
|
All Rights Reserved © IC-ON-LINE 2003 - 2022 |
[Add Bookmark] [Contact Us] [Link exchange] [Privacy policy] |
Mirror Sites : [www.datasheet.hk]
[www.maxim4u.com] [www.ic-on-line.cn]
[www.ic-on-line.com] [www.ic-on-line.net]
[www.alldatasheet.com.cn]
[www.gdcy.com]
[www.gdcy.net] |