View EPA3507G-75_4480119.PDF datasheet online --- IC-ON-LINE

Datasheet File OCR Text:

14 Pin DIP and SMD 5 Tap Both Edges Controlled Fast Logic TTL Compatible Active Delay Lines
Compatible with standard auto-insertable equipment and can be used in either infrared or vapor phase process.
Input to Tap 5% or 2nS Tap to Tap 7% or 2nS
Tap 5, 10, 15, 20 6, 12, 18, 24 7, 14, 21, 28 8, 16, 24, 32 9, 18, 27, 36 10, 20, 30, 40 12, 24, 36, 48 15, 30, 45, 60 20, 40, 60, 80 25, 50, 75, 100 30, 60, 90, 120 35, 70, 105, 140 Whichever is greater. Total 25 30 35 40 45 50 60 75 100 125 150 175
DIP Part Number
EPA3507-25 EPA3507-30 EPA3507-35 EPA3507-40 EPA3507-45 EPA3507-50 EPA3507-60 EPA3507-75 EPA3507-100 EPA3507-125 EPA3507-150 EPA3507-175
SMD Part Number
EPA3507G-25 EPA3507G-30 EPA3507G-35 EPA3507G-40 EPA3507G-45 EPA3507G-50 EPA3507G-60 EPA3507G-75 EPA3507G-100 EPA3507G-125 EPA3507G-150 EPA3507G-175
Input to Tap 5% or 2nS Tap to Tap 7% or 2nS
Tap 40, 80, 120, 160 45, 90, 135, 180 50, 100, 150, 200 60, 120, 180, 240 70, 140, 210, 280 80, 160, 240, 320 84, 168, 252, 336 88, 176, 264, 352 90, 180, 270, 360 84, 188, 282, 376 100, 200, 300, 400 Total 200 225 250 300 350 400 420 440 450 470 500
DIP Part Number
EPA3507-200 EPA3507-225 EPA3507-250 EPA3507-300 EPA3507-350 EPA3507-400 EPA3507-420 EPA3507-440 EPA3507-450 EPA3507-470 EPA3507-500
SMD Part Number
EPA3507G-200 EPA3507G-225 EPA3507G-250 EPA3507G-300 EPA3507G-350 EPA3507G-400 EPA3507G-420 EPA3507G-440 EPA3507G-450 EPA3507G-470 EPA3507G-500
Delay measured @ 1.5V levels on leading and trailing edge w/ 15pF load on taps. Rise and Fall Time measured from 0.75 to 2.4V level. Electrical Characteristics Schematic Parameter Test Conditions Min. Max. Unit
High-Level Output Voltage Low-Level Output Voltage Input Clamp Voltage High-Level Input Current Low-Level Input Current Short Circuit Output Current
14 VCC 12 4 10 6 8 OUTPUT
VCC = Min. V IL = Max. I OH = Max. 2.7 V VCC = Min. VIH = Min. I OL= Max. 0.5 V VCC = Min. II = IIK -1.2 V VCC = Max. V IN = 2.7V 20 A VCC = Max. V IN = 0.5V -0.6 mA VCC = Max. V OUT = 0. -60 -150 mA (One output at a time) I CCH High-Level Supply Current VCC = Max. V IN = OPEN 25 mA ICCL Low-Level Supply Current VCC = Max. V IN = 0 40 mA TRO Output Rise Time Td 500 nS (0.75 to 2.4 Volts) 4 nS Td > 500 nS 5 nS NH Fanout High-Level Output VCC = Max. V OH = 2.7V 20 TTL LOAD NL Fanout Low-Level Output VCC = Max. V OL = 0.5V 10 TTL LOAD TC Temp. Coeff. of Total Delay 100 + (25000/TD) PPM/C TSTG Storage Temp. Range -20 C to +100 C
VOH VOL VIK IIH IIL IOS
INPUT 1
7 GROUND
Recommended Operating Conditions
VCC VIH VIL IIK IOH IOL PW* d* TA
Min. Max. Unit
V V V mA mA mA % % C
Input Pulse Test Conditions @ 25 C
EIN PW TRI PRR VCC Pulse Input Voltage Pulse Width 1.2X Total Delay Pulse Rise Time (10 - 90%) Pulse Repetition Rate 4X P W Supply Voltage 3.2 --3.0 --5.0
Unit
Volts nS nS MHz Volts
Supply Voltage 4.75 5.25 High-Level Input Voltage 2.0 Low-Level Input Voltage 0.8 Input Clamp Current -18 High-Level Output Current -1.0 Low-Level Output Current 20 Input Pulse Width of Total Delay 40 Duty Cycle 50 Operating Free-Air Temperature 0 +70
*These two values are inter-dependent.
.085 Typ.
SMD Package
DIP Package
.200 .200 PCA EPA3507-XX Date Code .300 .780 Max. .010 .005 .010 Typ. .250 Max. .020 Min. .010 Typ.
Pin 1 I.D.
PCA EPA3507G-XX Date Code .300 Typ. .200 Typ. .770
.270
Suggested Solder Pad Layout
.055 .420
Pin 1 I.D.
.280 Max.
.300
.030
.100
.215
0-8
.019 .002
.100 Typ.
Rev. - 7/22/98
.035 .380
.020 Typ.
.125 .010
.365 Max.
DSA3507G-XX & DSA3507-XX
QAF-CSO1 Rev. B 8/25/94
Unless Otherwise Noted Dimensions in Inches Tolerances: Fractional = 1/32 .XX = .030 .XXX = .010
ELECTRONICS
INC.
16799 SCHOENBORN ST. NORTH HILLS, CA 91343 TEL: (818) 892-0761 FAX: (818) 894-5791

▲Up To Search▲

Price & Availability of EPA3507G-75

	To Download EPA3507G-75 Datasheet File
If you can't view the Datasheet, Please click here to try to view without PDF Reader .