|
If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
Datasheet File OCR Text: |
Single Window Single Mode Wideband Fiber Coupler (980, 1310, S, C, L, and C+L band) SWFC Series Product Description The Oplink fused single window wideband fiber 1x2 (2x2) couplers provide accurate optical signal coupling and splitting over wide bandwidth with high performance and high reliability. These couplers have excellent uniformity, low excess loss and very low polarization sensitivity and are available with various tap ratios, wavelength ranges, fiber types, and connector options. All devices are shown to be able to handle high optical power up to 4W and are tested according to industry standard procedures. Reliability is guaranteed through stringent tests to fully meet Telcordia GR-1221 requirements. Port 1 In L Port 2 Main (High%) Port 4 (terminated for 1x2 con guration) O Port 3 Tap (Low%) Performance Specificationns SWFC Series 980 nm 1310 nm S Band C Band L Band C+L Band Unit Features Wavelength Independent Low Insertion Loss and PDL High Power Handling Guranteed Reliability Wavelength Range Fiber Type Insertion Loss [1] Return Loss (Min) Directivity (Min) TDL [2] (Max) Maximum Power Handling Operating Temperature Range [3] Storage Temperature Range Package Dimensions ** 970 ~ 990 Corning HI980 Corning HI1060 OFS BF05635-02 1270 ~ 1350 1420 ~ 1500 1530 ~ 1565 1570 ~ 1605 1530 ~ 1610 nm Corning SMF-28 See Insertion Loss Table I, II, III 55 55 dB dB dB dB W C C mm Applications Signal monitoring in EDFA Network Monitoring CATV Local Area Networks Testing Instruments Laboratory R&D Signal Path: <0.1dB, Tap Path: <0.15 dB 4 - 40 to + 75 - 40 to + 85 P1: 250 m bare fiber P2: 900 m loose tube P3: 3mm cable (O) 3.0 x (L) 47.0 (O) 3.0 x (L) 60.0 (L) 96.0 x (W) 12.0 x (H) 6.4 Note: [1] Values are referenced without connector loss. [2] Temperature Sensitivity Coefficient ~0.002dB/C at the range of -5 to 75C. [3] Operating temperature range changes to -5 to 75C in P2, P3 package and all package with connectors [4] The mechanical tolerance should be +/- 0.2 mm on all package dimensions unless otherwise custom specified. R07.20081210 Single Window Single Mode Wideband Fiber Coupler (980, 1310, S, C, L, and C+L band) SWFC Series Insertion Loss Tables Insertion Loss (IL) I : C or L band coupler P Grade Coupling Ratio A Grade IL1 (dB) Signal Tap 19.0-21.0 16.4-18.4 14.6-16.2 12.4-13.8 9.60-10.8 7.80-8.80 6.60-7.60 5.75-6.50 5.00-5.50 4.40-4.90 3.95-4.30 3.35-3.80 0.20 0.25 0.30 0.35 0.60 0.85 1.15 1.35 1.75 2.10 2.50 2.85 WDL2 (dB) Signal Tap 0.08 0.50 0.10 0.40 0.10 0.30 0.12 0.25 0.12 0.22 0.15 0.20 0.15 0.20 0.15 0.20 0.15 0.20 0.15 0.20 0.15 0.20 0.15 0.20 0.20 PDL3 (dB) Signal Tap 0.04 0.12 0.04 0.12 0.04 0.12 0.04 0.10 0.05 0.10 0.05 0.10 0.05 0.10 0.06 0.10 0.06 0.10 0.07 0.10 0.07 0.09 0.07 0.09 0.08 IL1 (dB) Signal 0.20 0.30 0.35 0.40 0.65 0.90 1.15 1.44 1.82 2.15 2.60 2.90 Tap 17.7-21.5 16.0-19.4 14.0-16.8 12.0-14.4 9.20-11.2 7.5-9.0 6.4-8.0 5.6-6.7 4.9-5.8 4.3-5.0 3.7-4.6 3.1-4.0 WDL2 (dB) Signal 0.10 0.10 0.10 0.12 0.13 0.15 0.16 0.16 0.16 0.16 0.17 0.17 Tap 0.55 0.45 0.40 0.30 0.26 0.25 0.23 0.22 0.20 0.20 0.20 0.20 PDL3 (dB) Signal 0.05 0.05 0.05 0.05 0.06 0.06 0.07 0.07 0.08 0.08 0.08 0.09 Tap 0.15 0.15 0.15 0.15 0.14 0.14 0.13 0.13 0.12 0.12 0.10 0.10 99/1 98/2 97/3 95/5 90/10 85/15 80/20 75/25 70/30 65/35 60/40 55/45 50/50 2.80-3.30 2.70-3.30 0.22 0.10 1. Insertion loss over operating wavelength range at ~23C (excluding PDL and TDL). 2. Insertion loss change over the specified wavelength range. 3. Insertion loss change over the all input polarization states Insertion Loss (IL) II : 1310nm, S2 or C+L band coupler P Grade Coupling Ratio A Grade IL (dB) 1 WDL (dB) 2 PDL (dB) 3 IL (dB) 1 WDL2 (dB) Tap Signal 0.10 0.11 0.12 0.15 0.16 0.18 0.20 0.20 0.25 0.30 0.35 0.40 Tap 1.20 1.00 0.90 0.80 0.60 0.67 0.55 0.53 0.50 0.50 0.48 0.48 PDL3 (dB) Signal Tap 0.05 0.05 0.05 0.05 0.06 0.06 0.07 0.07 0.08 0.08 0.09 0.09 0.20 0.15 0.15 0.15 0.15 0.15 0.14 0.14 0.13 0.13 0.11 0.11 Signal 99/1 98/2 97/3 95/5 90/10 85/15 80/20 75/25 70/30 65/35 60/40 55/45 50/50 0.20 0.25 0.30 0.40 0.65 0.95 1.20 1.60 1.80 2.10 2.55 2.90 Tap 18.2-21.0 16.0-18.6 14.4-16.4 12.2-14.0 9.40-11.0 7.70-8.85 6.30-7.80 5.45-6.70 4.60-5.75 4.10-5.05 3.85-4.40 3.15-3.85 Signal Tap Signal 0.04 0.04 0.04 0.04 0.05 0.05 0.05 0.06 0.06 0.07 0.07 0.07 Tap 0.15 0.12 0.12 0.10 0.10 0.10 0.10 0.10 0.10 0.10 0.09 0.09 Signal 0.23 0.30 0.34 0.40 0.65 0.85 1.15 1.44 1.82 2.15 2.60 2.81 0.09 0.90 0.09 0.80 0.10 0.70 0.13 0.60 0.15 0.50 0.15 0.45 0.17 0.40 0.18 0.40 0.22 0.40 0.23 0.38 0.25 0.35 0.30 0.35 0.35 17.4-21.5 15.2-19.8 13.7-17.1 11.8-14.7 9.00-11.3 7.4-9.1 6.0-8.1 5.4-6.8 4.6-5.9 4.2-5.0 3.7-4.6 3.1-4.0 2.70-3.40 0.08 2.60-3.50 0.40 0.10 1. Insertion loss over operating wavelength range at ~23C (excluding PDL and TDL). For S-band product, add 0.1dB due to water absorption peak of fiber. 2. Insertion loss change over the specified wavelength range. For S-band product, add 0.1dB in WDL due to water absorption peak of fiber. 3. Insertion loss change over the all input polarization states. Oplink Communications, Inc. Single Window Single Mode Wideband Fiber Coupler (980, 1310, S, C, L, and C+L band) SWFC Series Insertion Loss (IL) III : 980nm coupler P Grade Coupling Ratio A Grade IL1 (dB) Signal Tap 18.5-21.0 15.7-18.9 13.9-16.9 11.4-14.8 9.20-11.3 7.40-9.00 5.70-7.90 5.10-6.80 4.30-6.00 3.75-5.35 3.40-4.70 2.85-4.10 0.20 0.27 0.33 0.38 0.60 1.00 1.30 1.65 1.90 2.10 2.60 2.90 WDL2 (dB) Signal Tap 0.10 1.00 0.15 1.00 0.17 1.00 0.20 0.90 0.25 0.70 0.25 0.65 0.25 0.60 0.30 0.55 0.35 0.50 0.35 0.45 0.35 0.40 0.35 0.35 0.30 PDL3 (dB) Signal Tap 0.05 0.12 0.05 0.12 0.05 0.12 0.05 0.12 0.07 0.12 0.10 0.12 0.10 0.12 0.10 0.10 0.10 0.10 0.10 0.10 0.10 0.10 0.10 0.10 0.10 IL1 (dB) Signal 0.25 0.32 0.37 0.50 0.70 1.20 1.50 1.85 2.20 2.40 2.80 2.95 Tap 15.5-21.5 14.8-19.8 13.2-17.7 11.2-15.2 8.70-11.7 7.00-9.60 5.40-8.50 4.80-7.30 4.20-6.40 3.50-5.60 3.20-4.70 3.05-4.25 WDL2 (dB) Signal 0.15 0.20 0.25 0.35 0.35 0.35 0.40 0.45 0.45 0.45 0.45 Tap 1.20 1.15 1.10 0.75 0.75 0.75 0.70 0.65 0.60 0.55 0.50 PDL3 (dB) Signal Tap 0.07 0.15 0.07 0.15 0.07 0.15 0.07 0.15 0.10 0.15 0.10 0.15 0.10 0.15 0.10 0.15 0.10 0.15 0.10 0.15 0.10 0.15 0.10 0.15 0.15 99/1 98/2 97/3 95/5 90/10 85/15 80/20 75/25 70/30 65/35 60/40 55/45 50/50 0.22 1.15 2.70-3.40 2.60-3.60 0.45 46335 Landing Pkwy Fremont, CA 94538 Tel: (510) 933-7200 Fax: (510) 933-7300 Email: Sales@Oplink.com * www.oplink.com 1. Insertion loss over operating wavelength range at ~23C (excluding PDL and TDL). 2. Insertion loss change over the specified wavelength range. 3. Insertion loss change over the all input polarization states. Ordering Information Oplink can provide a remarkable range of customized optical solutions. For detail, please contact Oplink's OEM design team or account manager for your requirements and ordering information (510) 933-7200. SWFC 0 0 Wavelength 980 nm = 9 1310 nm = 3 C band = 5 S band = 4 L band = 6 C+L band = 1 Type 1x2 = 1 2x2 = 2 Tap Ratio 50/50 = 50 45/55 = 45 40/60 = 40 35/65 = 35 30/70 = 30 25/75 = 25 20/80 = 20 15/85 = 15 10/90 = 10 5/95 = 05 3/97 = 03 2/98 = 02 1/99 = 01 Grade Premium Grade = P A Grade = A Fiber Length** 0.5 Meter = H 1.0 Meter = 1 1.5 Meters = 5 2.0 Meters = 2 Connector Type None = 1 FC/PC = 2 FC/SPC = 3 FC/APC = 4 SC/PC = 5 SC/SPC = 6 SC/APC = 7 ST = 8 LC = 9 MU = A Package & Fiber Type P1 + Corning SMF-28 = 11 P2 + SMF-28 in 900 m loose tube = 22 P3 + SMF-28 in 3 mm cable = 33 P1 + Corning HI1060 = 16 P1 + Corning HI980 = 19 P1 + OFS BF05635-02 = 17 P2 + Corning HI1060 = 26 P2 + Corning HI980 = 29 P2 + OFS BF05635-02 = 27 P3 + Corning HI1060 = 36 P3 + Corning HI980 = 39 P3 + OFS BF05635-02 = 37 Notes : * For HI1060, HI980 and OFS BF05635-02 fiber type, the Connector Option is None. ** The tolerance of fiber length is +/-0.1m. 1 meter is standard. The lead time for special fiber length will be longer. R07.20081210 Product Lines: Mux/Demux Switching/Routing Coupling/Splitting Monitoring/Conditioning Amplification Transmission Interconnect RGB Laser Modules |
Price & Availability of SWFC4140 |
|
|
All Rights Reserved © IC-ON-LINE 2003 - 2022 |
[Add Bookmark] [Contact Us] [Link exchange] [Privacy policy] |
Mirror Sites : [www.datasheet.hk]
[www.maxim4u.com] [www.ic-on-line.cn]
[www.ic-on-line.com] [www.ic-on-line.net]
[www.alldatasheet.com.cn]
[www.gdcy.com]
[www.gdcy.net] |