 |
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
| Datasheet File OCR Text: |
| Marketing Bulletin DATE: TO: FROM: RE: May 1st, 2008 All Sales Personnel Isaac Gonzalez Product Termination To all concerned parties, This bulletin is to notify all customers of the discontinuation of the following Ecliptek series effective May 1st, 2008: Series Description EC1SM Resistance Welded Short HC-49/UP SMD Crystal EC2SM Resistance Welded HC-49/UP SMD Crystal Recommended Replacement E1S Series E2S Series In compliance with our End of Life (EOL) policy, this will serve as advanced notice of product termination. New orders will not be accepted after September 1st, 2009, with delivery to conclude by December 31st, 2009. If there are any questions pertaining to this bulletin, please feel free to contact me. Thank you again for your cooperation. Best Regards, Isaac Gonzalez Configuration Manager Ecliptek Corporation 3545 CADILLAC AVENUE * COSTA MESA, CA 92626-1401 * (714) 433-1200 * Fax (714) 433-1234 EC1SM Series * HC-49/UP short package * AT or BT cut available * Resistance weld seal * Tight tolerance/stability * Tape and reel available EC1SM H 3.20 L 13.30 W 4.85 CRYSTAL NOTES _____________________________________________________________________________________________________________________________________________________________________________________________ _____________________________________________________________________________________________________________________________________________________________________________________________ _____________________________________________________________________________________________________________________________________________________________________________________________ _____________________________________________________________________________________________________________________________________________________________________________________________ _____________________________________________________________________________________________________________________________________________________________________________________________ _____________________________________________________________________________________________________________________________________________________________________________________________ _____________________________________________________________________________________________________________________________________________________________________________________________ _____________________________________________________________________________________________________________________________________________________________________________________________ OBSOLETE _____________________________________________________________________________________________________________________________________________________________________________________________ _____________________________________________________________________________________________________________________________________________________________________________________________ _____________________________________________________________________________________________________________________________________________________________________________________________ _____________________________________________________________________________________________________________________________________________________________________________________________ ELECTRICAL SPECIFICATIONS Frequency Range Frequency Tolerance / Stability Over Operating Temperature Range Operating Temperature Range Aging (at 25C) Storage Temperature Range Shunt Capacitance Insulation Resistance Drive Level Load Capacitance (CL) 3.579545MHz to 50.000MHz 50ppm / 100ppm (Standard), 30ppm / 50ppm (AT cut only), 15ppm / 30ppm (AT cut only), 15ppm / 20ppm (AT cut only), or 10ppm / 15ppm (AT cut only) 0C to 70C (Standard), -20C to 70C (AT cut only), or -40C to 85C (AT cut only) 5ppm / year Maximum -40C to 85C 7pF Maximum 500 Megaohms Minimum at 100VDC 1 mWatt Maximum 18pF (Standard), Custom CL 10pF, or Series Resonant EQUIVALENT SERIES RESISTANCE (ESR), MODE OF OPERATION (MODE), AND CUT Frequency Range 3.579545MHz to 4.999MHz 5.000MHz to 5.999MHz 6.000MHz to 7.999MHz 8.000MHz to 8.999MHz 9.000MHz to 9.999MHz 10.000MHz to 14.999MHz MANUFACTURER ESR () 200 Max 150 Max 120 Max 90 Max 80 Max 70 Max CATEGORY Mode / Cut Fundamental / AT Fundamental / AT Fundamental / AT Fundamental / AT Fundamental / AT Fundamental / AT SERIES Frequency Range 15.000MHz to 15.999MHz 16.000MHz to 23.999MHz 24.000MHz to 30.000MHz 24.000MHz to 40.000MHz 28.6363MHz to 29.999MHz 30.000MHz to 50.000MHz PACKAGE ESR () 60 Max 50 Max 40 Max 40 Max 150 Max 100 Max CLASS Mode / Cut Fundamental / AT Fundamental / AT Fundamental / AT Fundamental / BT Third Overtone / AT Third Overtone / AT REV.DATE ECLIPTEK CORP. CRYSTAL EC1SM HC-49/UP Short CR21 03/06 800-ECLIPTEK www.ecliptek.com for latest revision Specifications subject to change without notice. PART NUMBERING GUIDE EC1SM A - T - 20 - 30.000M TR FREQUENCY TOLERANCE / STABILITY Blank=50ppm at 25C, 100ppm from 0C to 70C A=50ppm at 25C, 100ppm from -20C to 70C B=50ppm at 25C, 100ppm from -40C to 85C C=30ppm at 25C, 50ppm from 0C to 70C D=30ppm at 25C, 50ppm from -20C to 70C E=30ppm at 25C, 50ppm from -40C to 85C F=15ppm at 25C, 30ppm from 0C to 70C G=15ppm at 25C, 30ppm from -20C to 70C H=15ppm at 25C, 30ppm from -40C to 85C J=15ppm at 25C, 20ppm from 0C to 70C K=15ppm at 25C, 20ppm from -20C to 70C L=15ppm at 25C, 20ppm from -40C to 85C M=10ppm at 25C, 15ppm from 0C to 70C N=10ppm at 25C, 15ppm from -20C to 70C MECHANICAL DIMENSIONS ALL DIMENSIONS IN MILLIMETERS PACKAGING OPTIONS Blank=Bulk, TR=Tape and Reel FREQUENCY LOAD CAPACITANCE Blank=18pF (Standard), S=Series XX=XXpF (Custom) MODE OF OPERATION / CRYSTAL CUT Blank=Fundamental / AT, B=Fundamental / BT T=Third Overtone / AT OBSOLETE SUGGESTED SOLDER PAD LAYOUT ALL DIMENSIONS IN MILLIMETERS Coplanarity: 0.36mm Maximum Tolerances = 0.2 TAPE AND REEL DIMENSIONS ALL DIMENSIONS IN MILLIMETERS TAPE A 24.3 B G B0* C H J A0* D 4 .2 E 2.1 REEL 1. M 5 MIN N 50 MIN O 20.2 MIN P 13.2 Q 40 MIN QTY/REEL 1,000 11.5.1 1 0.75.1 1.5 +.1 F 12.2 K .4.1 L K0* R 2.5 MIN S 10 MIN T 30.4 MAX U 360 MAX V 24.4+2-0 *Compliant to EIA-481A ENVIRONMENTAL/MECHANICAL SPECIFICATIONS PARAMETER SPECIFICATION MARKING SPECIFICATIONS Fine Leak Test Gross Leak Test Mechanical Shock Vibration Solderability Temperature Cycling Resistance to Soldering Heat Resistance to Solvents MIL-STD-883, Method 1014, Condition A MIL-STD-883, Method 1014, Condition C MIL-STD-202, Method 213, Condition C MIL-STD-883, Method 2007, Condition A MIL-STD-883, Method 2002 MIL-STD-883, Method 1010 MIL-STD-883, Method 210 MIL-STD-883, Method 215 Line 1: E XX.XXX M M or Blank (No Marking) Frequency in MHz (5 Digits Maximum + Decimal) MANUFACTURER CATEGORY SERIES PACKAGE CLASS REV.DATE ECLIPTEK CORP. CRYSTAL EC1SM HC-49/UP Short CR21 03/06 800-ECLIPTEK www.ecliptek.com for latest revision Specifications subject to change without notice. EC2SM Series * HC-49/UP package * AT or BT cut available * Resistance weld seal * Tight tolerance/stability * Tape and reel available EC2SM H 4.50 L 13.30 W 4.85 CRYSTAL NOTES _____________________________________________________________________________________________________________________________________________________________________________________________ _____________________________________________________________________________________________________________________________________________________________________________________________ _____________________________________________________________________________________________________________________________________________________________________________________________ _____________________________________________________________________________________________________________________________________________________________________________________________ _____________________________________________________________________________________________________________________________________________________________________________________________ _____________________________________________________________________________________________________________________________________________________________________________________________ _____________________________________________________________________________________________________________________________________________________________________________________________ _____________________________________________________________________________________________________________________________________________________________________________________________ OBSOLETE _____________________________________________________________________________________________________________________________________________________________________________________________ _____________________________________________________________________________________________________________________________________________________________________________________________ _____________________________________________________________________________________________________________________________________________________________________________________________ _____________________________________________________________________________________________________________________________________________________________________________________________ ELECTRICAL SPECIFICATIONS Frequency Range Frequency Tolerance / Stability Over Operating Temperature Range Operating Temperature Range Aging (at 25C) Storage Temperature Range Shunt Capacitance Insulation Resistance Drive Level Load Capacitance (CL) 3.579545MHz to 50.000MHz 50ppm / 100ppm (Standard), 30ppm / 50ppm (AT cut only), 15ppm / 30ppm (AT cut only), 15ppm / 20ppm (AT cut only), or 10ppm / 15ppm (AT cut only) 0C to 70C (Standard), -20C to 70C (AT cut only), or -40C to 85C (AT cut only) 5ppm / year Maximum -40C to 85C 7pF Maximum 500 Megaohms Minimum at 100VDC 1 mWatt Maximum 18pF (Standard), Custom CL 10pF, or Series Resonant EQUIVALENT SERIES RESISTANCE (ESR), MODE OF OPERATION (MODE), AND CUT Frequency Range 3.579545MHz to 4.999MHz 5.000MHz to 5.999MHz 6.000MHz to 7.999MHz 8.000MHz to 8.999MHz 9.000MHz to 9.999MHz 10.000MHz to 14.999MHz MANUFACTURER ESR () 200 Max 150 Max 120 Max 90 Max 80 Max 70 Max Mode / Cut Fundamental / AT Fundamental / AT Fundamental / AT Fundamental / AT Fundamental / AT Fundamental / AT Frequency Range 15.000MHz to 15.999MHz 16.000MHz to 23.999MHz 24.000MHz to 30.000MHz 24.000MHz to 40.000MHz 28.6363MHz to 29.999MHz 30.000MHz to 50.000MHz ESR () 60 Max 50 Max 40 Max 40 Max 150 Max 100 Max Mode / Cut Fundamental / AT Fundamental / AT Fundamental / AT Fundamental / BT Third Overtone / AT Third Overtone / AT CATEGORY SERIES PACKAGE CLASS REV.DATE ECLIPTEK CORP. CRYSTAL EC2SM HC-49/UP CR03 03/06 800-ECLIPTEK www.ecliptek.com for latest revision Specifications subject to change without notice. PART NUMBERING GUIDE EC2SM A - T - 20 - 30.000M TR FREQUENCY TOLERANCE / STABILITY Blank=50ppm at 25C, 100ppm from 0C to 70C A=50ppm at 25C, 100ppm from -20C to 70C B=50ppm at 25C, 100ppm from -40C to 85C C=30ppm at 25C, 50ppm from 0C to 70C D=30ppm at 25C, 50ppm from -20C to 70C E=30ppm at 25C, 50ppm from -40C to 85C F=15ppm at 25C, 30ppm from 0C to 70C G=15ppm at 25C, 30ppm from -20C to 70C H=15ppm at 25C, 30ppm from -40C to 85C J=15ppm at 25C, 20ppm from 0C to 70C K=15ppm at 25C, 20ppm from -20C to 70C L=15ppm at 25C, 20ppm from -40C to 85C M=10ppm at 25C, 15ppm from 0C to 70C N=10ppm at 25C, 15ppm from -20C to 70C PACKAGING OPTIONS Blank=Bulk, TR=Tape and Reel FREQUENCY LOAD CAPACITANCE Blank=18pF (Standard), S=Series XX=XXpF (Custom) MODE OF OPERATION / CRYSTAL CUT Blank=Fundamental / AT, B=Fundamental / BT T=Third Overtone / AT MECHANICAL DIMENSIONS ALL DIMENSIONS IN MILLIMETERS OBSOLETE ALL DIMENSIONS IN MILLIMETERS SUGGESTED SOLDER PAD LAYOUT Coplanarity: 0.36mm Maximum Tolerances = 0.2 TAPE AND REEL DIMENSIONS ALL DIMENSIONS IN MILLIMETERS TAPE A 24.3 B 11.5.1 C 10.75.1 D 4 .2 E 2.1 REEL M 1.5 MIN N 50 MIN O 20.2 MIN P 13.2 Q 40 MIN QTY/REEL 1,000 F 12.2 G B0* H 1.5 +.1 J A0* K .4.1 L K0* R 2.5 MIN S 10 MIN T 30.4 MAX U 360 MAX V 24.4+2-0 *Compliant to EIA-481A ENVIRONMENTAL/MECHANICAL SPECIFICATIONS MARKING SPECIFICATIONS PARAMETER SPECIFICATION Fine Leak Test Gross Leak Test Mechanical Shock Vibration Solderability Temperature Cycling Resistance to Soldering Heat Resistance to Solvents MIL-STD-883, Method 1014, Condition A MIL-STD-883, Method 1014, Condition C MIL-STD-202, Method 213, Condition C MIL-STD-883, Method 2007, Condition A MIL-STD-883, Method 2002 MIL-STD-883, Method 1010 MIL-STD-883, Method 210 MIL-STD-883, Method 215 Line 1: E XX.XXX M M or Blank (No Marking) Frequency in MHz (5 Digits Maximum + Decimal) MANUFACTURER CATEGORY SERIES PACKAGE CLASS REV.DATE ECLIPTEK CORP. CRYSTAL EC2SM HC-49/UP CR03 03/06 800-ECLIPTEK www.ecliptek.com for latest revision Specifications subject to change without notice. |
Price & Availability of EC1SM-B-S-30000M
 |
|
|
|
|
All Rights Reserved © IC-ON-LINE 2003 - 2022 |
| [Add Bookmark] [Contact Us] [Link exchange] [Privacy policy] |
|
Mirror Sites : [www.datasheet.hk]
[www.maxim4u.com] [www.ic-on-line.cn]
[www.ic-on-line.com] [www.ic-on-line.net]
[www.alldatasheet.com.cn]
[www.gdcy.com]
[www.gdcy.net] |