 |
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
| Datasheet File OCR Text: |
| FEATURES AND SPECIFICATIONS MTP* Optical Round Ribbon Cable Assemblies 86282 Optical Round Ribbon Cable Assemblies Offer Greater Flexibility in Interconnecting Optical Network Systems Molex's MTP round jacketed ribbon cable assemblies provide easier installation than traditional flat ribbon cables in optical networks. System designers and installers have found it difficult to route flat ribbon cable in complex networks. The use of round ribbon cables allows the installer greater flexibility when routing multiple jacketed cables in dense system networks. Molex developed a patent pending transition sleeve which maintains the routing features of the round cable while allowing the cable to be secured to the MTP connector. The primary benefit of the round Features and Benefits I Round outer jacket is easily installed by end user I Flexible PVC outer jacket is able to bend easily I Plenum-rated meets system flammability I Ribbons encased in solid buffer core ensures I Multiple ribbons stacked inside round jacket provide ribbon cable is realized with the use of multiple ribbons within a single jacket. Stacked ribbons in traditional flat jacketed ribbon cables are prone to piston in relation to each other, causing attenuation in longer cable assemblies. The round ribbon cable prevents the "pistoning" effect by encasing the ribbons in a solid buffer core, preventing them from moving. Fiber counts up to 24 fibers are currently available while development continues on the 48 and 72 fiber versions. MTP Round Ribbon Cable Assembly with Long Transition Sleeve reduced fiber pistoning between ribbons requirements a low-profile solution for high-density applications Proto-type Round Ribbon 72 Fiber Cable Assembly SPECIFICATIONS Reference Information Mechanical Packaging: Custom per assembly Mates With: MPO and MTP Connectors (86081 & 86082 Series) Optical Min. Bend Radius: 3 inches for 12 fibers (10X the outer jacket diameter) Max. Tensile Rating: 667.23N (150 lbf) Physical Fiber Specifications: Core: 50m Clad: 125m Coating: 250m Insertion Loss (IL): 12F: 0.15 dB Typ. <0.5dB max. 24F: 0.25 dB Typ. <0.75dB max. 72F: 0.35 dB Typ. <1.00dB max. Attenuation: 850nm: Typ 2.5 dB/km Max 3.0 dB/km Min. Overfilled Bandwidth: 850nm: 500 MHz/km 1300nm: 500 MHz/km Outer Jacket: PVC Fire Rating: OFNR (Riser) and OFNP (Plenum) Operating Temp.: -20 to +70C Storage Temp.: -40 to +70C Install Temp.: -0 to +70C Dimensions: 12F (2 Ribbons x 6 Fibers): 3.3mm OD 16F (2 Ribbons x 8 Fibers): 4mm OD 24F (2 Ribbons x 12 Fibers): 5mm OD 48F (4 Ribbons x 12 Fibers): N/A 72F (6 Ribbons x 12 Fibers): N/A *MTP is a registered trademark of US Conec Ltd. MTP to MTP Round Ribbon Cable Assembly Singlemode (9/125m) and Multi-mode (62.5/125m) may be available with Minimum Order Quantity Under development APPLICATIONS I Parallel optic transceiver interconnection I High Density interconnects for: - Optical electrical modules - PC cards and patch panels - Optical switches and routers - Data communication centers MTP* Optical Round Ribbon Cable Assemblies 86282 ORDERING INFORMATION Cable Assemblies: Transition Sleeve Boot Options Order No. Description Transition Sleeve Boot Type Bend Management 86282-4817 86282-4851 86282-4852 Typical Optical MTP Round Ribbon Cable Assembly Drawing with Long Transition Sleeve Dimensional Specifications Long Long Long Straight 60 90 90 Parallel Only Bend 360 Rotatable Bend 90 Parallel Only Bend Cable Assemblies: No Transition Sleeve Boot Options Order No. Description Transition Sleeve Boot Type Bend Management 86282-4853 86282-4854 86282-4855 Typical Optical MTP Round Ribbon Cable Assembly Drawing with No Transition Sleeve Dimensional Specifications None None None Straight 60 90 90 Parallel Only Bend 60 Parallel Only Bend 90 Parallel Only Bend Notes: - Only sold as terminated jumpers or pigtails - The cable construction will be customer and system specific - All new opportunities should be reviewed with the Molex Fiber Optics program or product manager Americas Headquarters Lisle, Illinois 60532 U.S.A. 1-800-78MOLEX amerinfo@molex.com Far East North Headquarters Yamato, Kanagawa, Japan 81-462-65-2324 feninfo@molex.com Far East South Headquarters Jurong, Singapore 65-6-268-6868 fesinfo@molex.com European Headquarters Munich, Germany 49-89-413092-0 eurinfo@molex.com Corporate Headquarters 2222 Wellington Ct. Lisle, IL 60532 U.S.A. 630-969-4550 Fax:630-969-1352 Visit our Web site at http://www.molex.com/fiber/mtp_roundcable.html Order No. USA-272 Rev. 1 Printed in USA/JI/2004.11 (c)2004, Molex |
Price & Availability of 86282-4817
 |
|
|
|
|
All Rights Reserved © IC-ON-LINE 2003 - 2022 |
| [Add Bookmark] [Contact Us] [Link exchange] [Privacy policy] |
|
Mirror Sites : [www.datasheet.hk]
[www.maxim4u.com] [www.ic-on-line.cn]
[www.ic-on-line.com] [www.ic-on-line.net]
[www.alldatasheet.com.cn]
[www.gdcy.com]
[www.gdcy.net] |