![]() |
|
If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
Datasheet File OCR Text: |
Part No: CEM-1601 Description: magnetic buzzer Date: 9/08/2006 Unit: mm Page No: 1 of 5 Specifications Rated voltage Operating voltage Mean current Coil resistance Coil impedance Sound output 1.5 Vo-p 1.0 - 3.0 Vo-p 20 mA max. 30 4.5 105 Min. 80 (Typical 88) dBA Applying rated voltage, 2048 Hz square wave, 1/2 duty See impedance measurements graph Distance at 10cm (A-weight free air). Applying rated voltage of 2048 Hz, square wave, 1/2 duty. Rated frequency Operating temperature Storage temperature Dimensions Weight Material Terminal RoHS 2,048 Hz -20 ~ +60 C -30 ~ +70 C o16.0 x H14.0 mm 4.6 g PPO (Black) Pin type (Au Plating) yes See attached drawing See attached drawing Frequency Response Curve Phone: 800.275.4899 Fax: 503.612.2381 www.cui.com 20050 SW 112th Ave. Tualatin, OR 97062 Part No: CEM-1601 Description: magnetic buzzer Date: 9/08/2006 Unit: mm Page No: 2 of 5 Appearance Drawing Tolerance: 0.5 Measurement Method Phone: 800.275.4899 Fax: 503.612.2381 www.cui.com 20050 SW 112th Ave. Tualatin, OR 97062 Part No: CEM-1601 Description: magnetic buzzer Date: 9/08/2006 Unit: mm Page No: 3 of 5 Mechanical Characteristics Item Solderability Test Condition Lead terminals are immersed in rosin for 5 seconds and then immersed in solder bath of 270 5C for 3 1 seconds. Lead terminals are immersed up to 1.5 mm from the buzzer's body in solder bath of 260 5C for 3 1 seconds. Apply a force of 9.8 N (1.0 kg) to each terminal in each axial direction. The buzzer will be measured after applying a vibration amplitude of 1.52 mm with 10 to 55 Hz band of vibration frequency to each of the 3 perpendicular directions for 2 hours. The part is to be dropped from a height of 75 cm onto a 40 mm thick wooden board 3 times in 3 axis (X, Y, Z) for a total of 9 drops. Evaluation Standard 90% min. lead terminals should be wet with solder. (Except the edge of the terminal.) No in interference in operation. No damage or cutting off. After the test, the part should meet specifications without any damage to the appearance and the SPL should be within 10 dBA of the initial measurement. Soldering Heat Resistance Terminal Mechanical Strength Vibration Drop Test Environment Test Item High temp. test Low temp. test Thermal shock Test Condition The part will be subjected to +70C for 96 hours. The part will be subjected to -30C for 96 hours The part will be subjected to 10 cycles. One cycle will consist of: Evaluation Standard Temp./Humidity cycle The part shall be subjected to 10 cycles. One cycle will be 24 hours and consist of: After the test, the part should meet specifications without any damage to the appearance or performance except SPL. After 4 hours at 25C, the SPL should be within 10 dBA of the initial measurement. Phone: 800.275.4899 Fax: 503.612.2381 www.cui.com 20050 SW 112th Ave. Tualatin, OR 97062 Part No: CEM-1601 Description: magnetic buzzer Date: 9/08/2006 Unit: mm Page No: 4 of 5 Reliability Tests Item Operating (Life Test) Test Condition 1. Continuous life test: The part will be subjected to 72 hours at 45C with 1.5 V, 2048 Hz applied. 2. Intermittent life test: A duty cycle of 1 minute on, 1 minute off, a minimum of 10,000 times at room temp. (+25 10C) with 1.5 V, 2048 Hz applied. Evaluation Standard After the test, the part shall meet specifications without any damage to the appearance. After 4 hours at +25C, the SPL should be within 10 dBA of the initial SPL. Test Conditions Standard Test Condition Judgement Test Condition a) Tempurature: +5 ~ +35C a) Tempurature: +252C b) Humidity: 45 - 85% b) Humidity: 60 - 70% c) Pressure: 860 - 1060 mbar c) Pressure: 860 - 1060 mbar Phone: 800.275.4899 Fax: 503.612.2381 www.cui.com 20050 SW 112th Ave. Tualatin, OR 97062 Part No: CEM-1601 Description: magnetic buzzer Date: 9/08/2006 Unit: mm Page No: 5 of 5 Packaging Phone: 800.275.4899 Fax: 503.612.2381 www.cui.com 20050 SW 112th Ave. Tualatin, OR 97062 |
Price & Availability of CEM-1601
![]() |
|
|
All Rights Reserved © IC-ON-LINE 2003 - 2022 |
[Add Bookmark] [Contact Us] [Link exchange] [Privacy policy] |
Mirror Sites : [www.datasheet.hk]
[www.maxim4u.com] [www.ic-on-line.cn]
[www.ic-on-line.com] [www.ic-on-line.net]
[www.alldatasheet.com.cn]
[www.gdcy.com]
[www.gdcy.net] |