Part Number Hot Search : 
ML5800 2N22907A BC527 BD4148 2840XG1 12102 AOWF240 LM339ST
Product Description
Full Text Search
 

To Download CXE15-48S05J Datasheet File

  If you can't view the Datasheet, Please click here to try to view without PDF Reader .  
 
 


  Datasheet File OCR Text:
 CXE15 Series
DC-DC CONVERTERS
Single output
15 W High Efficiency DC-DC Converters 1
* High efficiency topology, 87% typical at 5 V * Industry standard footprint * Wide operating temperature, up to and exceeding 65 C (natural convection) * 90% to 110% output trim * No minimum load * Overvoltage protection * Remote ON/OFF control * Available RoHS compliant
The CXE15 is a new high efficiency open frame isolated 15 Watt converter series in an industry standard footprint. The CXE15 features an input voltage range of 33 Vdc to 75 Vdc and are available in output voltages of 5 V and 3.3 V. The output voltage on each model is adjustable from 90% to 110% of the nominal value. Typical efficiencies for the models are 87% for the 5 V and 86% for the 3.3 V. The CXE15 series also has a remote ON/OFF capability with active high or active low logic. Overcurrent and overvoltage protection features are included as standard. With full international safety approval including EN60950 and cUL1950, the CXE15 reduces compliance costs and time to market.
TUV
2 YEAR WARRANTY
All specifications are typical at nominal input, full load at 25 C unless otherwise stated
SPECIFICATIONS
OUTPUT SPECIFICATIONS Voltage adjustability Total error band Line regulation Load regulation Minimum load Overshoot Undershoot Ripple and noise (See Note 1) Transient response typ. deviation INPUT SPECIFICATIONS Input voltage range Input current Input current (max.) Input reflected ripple 48 Vin nominal No load Remote OFF (See Note 4) (See Note 6) 33-75 Vdc 35 mA max. 25 mA max. 0.55 A max. @ Io max. and Vin = 33-75 Vdc 5 mA (pk-pk) typ. (See Note 10) Open collector ref to -input Open circuit or >2 Vdc <1.2 Vdc 33 V (typ.) 30 V (typ.) 1.5 ms (typ.) 2.5 ms (typ.) 5 Hz to 20 MHz (See Note 2) (See Note 11) Low line to high line Full load to min. load 90% to 110% 3.5% max. 0.1% max. 0.5% max. 0% None None 70 mV pk-pk 20 mV rms 100 mV 400 s recovery to within total error band
EMC CHARACTERISTICS Conducted emissions Radiated emissions Immunity: ESD air ESD contact Radiated field enclosure Conducted (dc power) Conducted (signal) Input transients EN55022 (See Note 3) Level A EN55022 (See Note 3) Level B EN55022 (See Longform datasheet) Level B EN61000-4-2 8 kV, 15 kV EN61000-4-2 6 kV, 8 kV EN61000-4-3 10 V/m EN61000-4-6 10 V EN61000-4-6 10 V (See Note 8) ETS 300 132-2, ETR 283
GENERAL SPECIFICATIONS Efficiency Operational insulation Switching frequency Approvals and standards (See Note 5) Material flammability Weight MTBF Representative model: Input/output Fixed See table 1500 Vdc 265 kHz typ. UL/cUL1950, EN60950 TUV Rheinland UL94V-0 12 g (0.42 oz) MIL-HDBK-217F 3,628,000 hours 48S05J @ 48 Vin, 40 C, 100% load ground benign BELLCORE 332 >1,500,000 hours
Active high remote ON/OFF Logic compatibility ON OFF Undervoltage lockout Start-up time (See Note 7) Power up Power down
ENVIRONMENTAL SPECIFICATIONS Thermal performance (See Note 9) Operating ambient temperature Non-operating -40 C to +65 C -40 C to +120 C
Power up Remote ON/OFF
File Name: cxe15s.pdf Rev: 01 Mar 2006
CXE15 Series
DC-DC CONVERTERS
OUTPUT POWER (MAX.) 15 W 15 W INPUT VOLTAGE 33-75 Vdc 33-75 Vdc OVP OUTPUT VOLTAGE 3.3 V 5V
Single output
15 W High Efficiency DC-DC Converters 2
For the most current data and application support visit www.artesyn.com/powergroup/products.htm
OUTPUT CURRENT (MIN.) 0A 0A OUTPUT CURRENT (MAX.) 4.5 A 3A EFFICIENCY (TYP.) 86% 87% REGULATION LINE 0.1% 0.1% LOAD 0.5% 0.5% MODEL NUMBER (10,12) CXE15-48S3V3-SJ CXE15-48S05J
4 Vdc 6 Vdc
Notes
Measured as per recommended set-up. See Application Note 116 for details. 2 di/dt = 0.1 A/s, Vin = 48 Vdc, Tc = 25 C, load change = 0.5 lo max. to 0.75 lo max. and 0.75 lo max. to 0.5 lo max. 3 The CXE15 meets level A and level B conducted emissions only with external components connected before the input pins to the converter. See Application Note 116 for details. 4 Recommended input fusing is a 2 A HRC 200 V rated fuse. 5 This product is only for inclusion by professional installers within other equipment and must not be operated as a stand alone product. 6 Measured with external filter. See Application Note 116 for details. 7 Start-up into resistive load. 8 Signal line assumed < 3 m in length. 9 Operating ambient temperatures are specified at natural convection. Higher operating temperatures are possible with increased airflow. See Application Note 116 for details. 10 Remote ON/OFF (pin 3) and Trim (pin 5) are currently available individually or together. The CXE-48S05J model includes pins 1, 2, 4, and 6. The CXE15-48S3V3-SJ features pin 3 with positive logic. 11 This parameter is calculated at worst case line, load, temperature and initial settings. 12 The `J' suffix indicates that these parts are Pb-free (RoHS 6/6) compliant. TSE RoHS 5/6 (non Pb-free) compliant versions may be available on special request, please contact your local sales representative for details. 1
PROTECTION Short circuit Overvoltage TELECOM SPECIFICATION Central office interface A ETS300-132-2, input voltage and current requirements Continuous Non-latching clamp
CAUTION: Hazardous internal voltages and high temperatures. Ensure that unit is not user accessible.
File Name: cxe15s.pdf Rev: 01 Mar 2006
CXE15 Series
DC-DC CONVERTERS
Single output
15 W High Efficiency DC-DC Converters 3
For the most current data and application support visit www.artesyn.com/powergroup/products.htm
TOP VIEW
1.000 (25.40)
Dimensions in Inches [mm]
2.000 (50.80)
0.350 (8.89) SIDE VIEW 0.600 (15.24) 0.040 (1.02) 0.600 (15.24) 0.800 (20.32)
0.015 (0.38)
0.120 (3.05)
Recommended Hole Pattern 0.800 (20.32)
4
0.100 (2.54) 0.400 (10.16)
0.200 (5.08)
0.800 (20.32)
3 1 6
Case Outline 0.400 (10.16) 0.040 (1.016) 0.400 (10.16)
BOTTOM VIEW
0.200 (5.08) 0.300 (7.62) 0.10 (2.54)
2 5 1 3 6
0.400 (10.16) 0.600 (15.24)
0.200 (5.08)
.200(5.08) .560 (14.22) 5 .060 (1.52) 2
4
Standoff (4 places)
Plated Through Hole 0.052-0.06 (1.321-1.40) typical
PIN CONNECTIONS PIN NUMBER 1 2 3 4 5 6 FEATURE Vin Vin + On/Off (See Note 10) Vout + Trim (See Note 10) Vout -
International Safety Standard Approvals
UL/cUL 1950 3rd edition. File No. E135734
TUV
TUV Rheinland. Certificate No. R2074133 File No. 10401-3336-0916
Datasheet (c) Artesyn Technologies(R) 2006 The information and specifications contained in this datasheet are believed to be correct at time of publication. However, Artesyn Technologies accepts no responsibility for consequences arising from printing errors or inaccuracies. Specifications are subject to change without notice. No rights under any patent accompany the sale of any such product(s) or information contained herein.
Please consult our website for the following items: Application Note Longform Data Sheet
www.artesyn.com
File Name: cxe15s.pdf Rev: 01 Mar 2006


▲Up To Search▲   

 
Price & Availability of CXE15-48S05J

All Rights Reserved © IC-ON-LINE 2003 - 2022  

[Add Bookmark] [Contact Us] [Link exchange] [Privacy policy]
Mirror Sites :  [www.datasheet.hk]   [www.maxim4u.com]  [www.ic-on-line.cn] [www.ic-on-line.com] [www.ic-on-line.net] [www.alldatasheet.com.cn] [www.gdcy.com]  [www.gdcy.net]


 . . . . .
  We use cookies to deliver the best possible web experience and assist with our advertising efforts. By continuing to use this site, you consent to the use of cookies. For more information on cookies, please take a look at our Privacy Policy. X