 |
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
| Datasheet File OCR Text: |
| 3.5x2.8 mm SMD CHIP LED LAMP PRELIMINARY SPEC ATTENTION OBSERVE PRECAUTIONS FOR HANDLING ELECTROSTATIC DISCHARGE SENSITIVE DEVICES Part Number: AA3529ZG24ZS GREEN Features SINGLE COLOR. SUITABLE FOR ALL SMT ASSEMBLY AND SOLDER PROCESS. AVAILABLE ON TAPE AND REEL. IDEAL FOR BACKLIGHTING. WHITE SMD PACKAGE, SILICONE RESIN. LOW THERMAL RESISTANCE. PACKAGE: 1500PCS / REEL. MOISTURE SENSITIVITY LEVEL : LEVEL 4. RoHS COMPLIANT. Description The Green source color devices are made with InGaAlN Vertical Light Emitting Diode. Static electricity and surge damage the LEDS. It is recommended to use a wrist band or anti-electrostatic glove when handling the LEDs. All devices, equipment and machinery must be electrically grounded. Package Dimensions Notes: 1. All dimensions are in millimeters (inches). 2. Tolerance is 0.25(0.01") unless otherwise noted. 3. Specifications are subject to change without notice. 4. The device has a single mounting surface. The device must be mounted according to the specifications. SPEC NO: DSAH9588 APPROVED: WYNEC REV NO: V.1 CHECKED: Allen Liu DATE: DEC/06/2007 DRAWN: R.Chen PAGE: 1 OF 6 ERP: 1201003020 Handling Precautions Compare to epoxy encapsulant that is hard and brittle, silicone is softer and flexible. Although its characteristic significantly reduces thermal stress, it is more susceptible to damage by external mechanical force. As a result, special handling precautions need to be observed during assembly using silicone encapsulated LED products. Failure to comply might leads to damage and premature failure of the LED. 1. Handle the component along the side surfaces by using forceps or appropriate tools. 2. Do not directly touch or handle the silicone lens surface. It may damage the internal circuitry. 3. Do not stack together assembled PCBs containing exposed LEDs. Outside impact may scratch the silicone lens or damage the internal circuitry. 1. The outer diameter of the SMD pickup nozzle should not exceed the size of the LED to prevent air leaks. The inner diameter of the nozzle should be as large as possible. 2. A pliable material is suggested for the nozzle tip to avoid scratching or damaging the LED surface during pickup. 3. The dimensions of the component must be accurately programmed in the pick-and-place machine to insure precise pickup and avoid damage during production. SPEC NO: DSAH9588 APPROVED: WYNEC REV NO: V.1 CHECKED: Allen Liu DATE: DEC/06/2007 DRAWN: R.Chen PAGE: 2 OF 6 ERP: 1201003020 Selection Guide Part No. Dice Lens Type Iv (mcd) [2] @ 150mA Min. AA3529ZG24ZS GREEN (InGaAlN) WATER CLEAR 6700 Typ. 7500 v (mlm) [2] @ 150mA Min. 18000 Typ. 21000 Viewing Angle [1] 2 1/2 120 Notes: 1. 1/2 is the angle from optical centerline where the luminous intensity is 1/2 the optical centerline value. 2. Luminous Intensity / Luminous Flux: +/-15%. Electrical / Optical Characteristics at TA=25C Symbol peak D [1] 1/2 C VF [2] Parameter Peak Wavelength Dominant Wavelength Spectral Line Half-width Capacitance Forward Voltage Device Green Green Green Green Green Typ. 515 525 30 45 3.4 3.8 Max. Units nm nm nm pF V Test Conditions IF=150mA IF=150mA IF=150mA VF=0V;f=1MHz IF=150mA Notes: 1. Wavelength: +/-1nm. 2. Forward Voltage: +/-0.1V. Absolute Maximum Ratings at TA=25C Parameter Power dissipation DC Forward Current Thermal Resistance Operating/Storage Temperature Green 570 150 170 -40C To +85C Units mW mA C/W SPEC NO: DSAH9588 APPROVED: WYNEC REV NO: V.1 CHECKED: Allen Liu DATE: DEC/06/2007 DRAWN: R.Chen PAGE: 3 OF 6 ERP: 1201003020 GREEN AA3529ZG24ZS SPEC NO: DSAH9588 APPROVED: WYNEC REV NO: V.1 CHECKED: Allen Liu DATE: DEC/06/2007 DRAWN: R.Chen PAGE: 4 OF 6 ERP: 1201003020 AA3529ZG24ZS Recommended Soldering Pattern (Units : mm; Tolerance: 0.1) Tape Specifications (Units : mm) SPEC NO: DSAH9588 APPROVED: WYNEC REV NO: V.1 CHECKED: Allen Liu DATE: DEC/06/2007 DRAWN: R.Chen PAGE: 5 OF 6 ERP: 1201003020 PACKING & LABEL SPECIFICATIONS AA3529ZG24ZS SPEC NO: DSAH9588 APPROVED: WYNEC REV NO: V.1 CHECKED: Allen Liu DATE: DEC/06/2007 DRAWN: R.Chen PAGE: 6 OF 6 ERP: 1201003020 |
Price & Availability of AA3529ZG24ZS
 |
|
|
|
|
All Rights Reserved © IC-ON-LINE 2003 - 2022 |
| [Add Bookmark] [Contact Us] [Link exchange] [Privacy policy] |
|
Mirror Sites : [www.datasheet.hk]
[www.maxim4u.com] [www.ic-on-line.cn]
[www.ic-on-line.com] [www.ic-on-line.net]
[www.alldatasheet.com.cn]
[www.gdcy.com]
[www.gdcy.net] |