|
If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
Datasheet File OCR Text: |
STB12NM50FD - STB12NM50FD-1 STP12NM50FD/FP - STW14NM50FD N-channel 500V - 0.32 - 12A - TO-220/FP - D2/I2PAK - TO-247 FDmeshTM Power MOSFET (with fast diode) General features Type STB12NM50FD STB12NM50FD-1 STP12NM50FD STP12NM50FDFP STW14NM50FD VDSS 500V 500V 500V 500V 500V RDS(on) <0.4 <0.4 <0.4 <0.4 <0.4 ID 12A 12A 12A 12A 12A Pw 160W 160W 160W 35W 160W 1 3 1 2 3 1 2 TO-220 3 TO-220FP DPAK DPAK 100% avalanche tested High dv/dt and avalanche capabilities Low input capacitance and gate charge Low gate input resistance Tight process control and high manufacturing yields 3 12 TO-247 IPAK Internal schematic diagram Description The FDmeshTM associates all advantages of reduced on-resistance and fast switching with an intrinsic fast-recovery body diode. It is therefore strongly recommended for bridge topologies, in particular ZVS phase-shift converters. Applications Switching application Order codes Part number STB12NM50FD STB12NM50FD-1 STP12NM50FD STP12NM50FDFP STW14NM50FD Marking B12NM50FD B12NM50FD P12NM50FD P12NM50FDFP W14NM50FD Package DPAK IPAK TO-220 TO-220FP TO-247 Packaging Tape & reel Tube Tube Tube Tube May 2006 Rev 3 1/18 www.st.com 18 Contents STB12NM50FD/-1 - STP12NM50FD/FP - STW14NM50FD Contents 1 2 Electrical ratings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 Electrical characteristics . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5 2.1 Electrical characteristics (curves) ............................ 6 3 4 5 6 Test circuit . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10 Package mechanical data . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11 Packaging mechanical data . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17 Revision history . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18 2/18 STB12NM50FD/-1 - STP12NM50FD/FP - STW14NM50FD Electrical ratings 1 Electrical ratings Table 1. Absolute maximum ratings Value Symbol Parameter TO-220/ D/IPAK VDS VDGR VGS ID ID IDM (2) Unit TO-220FP 500 500 30 TO-247 V V V 14 8.8 56 160 1.4 A A A W W/C V/ns -V C Drain-source voltage (VGS = 0) Drain-gate voltage (RGS = 20K) Gate-source voltage Drain current (continuous) at TC = 25C Drain current (continuous) at TC=100C Drain current (pulsed) Total dissipation at TC = 25C Derating factor 12 7.5 48 160 1.28 12(1) 7.5(1) 48 (1) 35 0.28 20 PTOT dv/dt(3) VISO TJ Tstg Peak diode recovery voltage slope Insulation withstand voltage (DC) Operating junction temperature Storage temperature -- 2500 -65 to 150 1. Limited only by maximum temperature allowed 2. Pulse width limited by safe operating area 3. ISD 12A, di/dt 400A/s, VDD =80%V(BR)DSS Table 2. Thermal resistance Value Symbol Parameter TO-220 IPAK Unit DPAK TO-220FP TO-247 3.57 100 300 62.5 0.77 C/W C/W C Rthj-case Thermal resistance junction-case Max Rthj-a Tl Thermal resistance junction-ambient Max Maximum lead temperature for soldering purpose 0.78 62.5 Table 3. Symbol IAR EAS Avalanche data Parameter Avalanche current, repetitive or not-repetitive (pulse width limited by Tj Max) Single pulse avalanche energy (starting Tj=25C, Id=Iar, Vdd=50V) Value 6 400 Unit A mJ 3/18 Electrical characteristics STB12NM50FD/-1 - STP12NM50FD/FP - STW14NM50FD 2 Electrical characteristics (TCASE=25C unless otherwise specified) Table 4. Symbol V(BR)DSS IDSS IGSS VGS(th) RDS(on) On/off states Parameter Drain-source breakdown voltage Zero gate voltage drain current (VGS = 0) Gate body leakage current (VDS = 0) Gate threshold voltage Static drain-source on resistance Test condictions ID = 1mA, VGS= 0 VDS = Max rating, VDS = Max rating @125C VGS = 30V VDS= VGS, ID = 250A VGS= 10V, ID= 6A 3 4 0.32 Min. 500 1 10 100 Typ. Max. Unit V A A nA V 5 0.4 Table 5. Symbol gfs (1) Ciss Coss Crss Qg Qgs Qgd RG Dynamic Parameter Forward transconductance Input capacitance Output capacitance Reverse transfer capacitance Total gate charge Gate-source charge Gate-drain charge Test condictions VDS =15V, ID = 6A VDS =25V, f=1 MHz, VGS=0 VDD=400V, ID = 3A VGS =10V (see Figure 11) f=1 MHz Gate DC Bias= 0 test signal level = 20mV open drain Min. Typ. 9.8 1000 390 20 12 3 7 Max. Unit S pF pF pF nC nC nC Gate input resistance 2 1. Pulsed: pulse duration=300s, duty cycle 1.5% 4/18 STB12NM50FD/-1 - STP12NM50FD/FP - STW14NM50FD Table 6. Symbol td(on) tr tr(Voff) tf tc Electrical characteristics Switching times Parameter Turn-on delay time Rise time Off-voltage rise time Fall time Cross-over time Test Condictions VDD=250 V, ID= 6A, RG=4.7, VGS=10V (see Figure 17) VDD=400 V, ID= 12A, RG=4.7, VGS=10V (see Figure 17) Min. Typ. 19 10 39 18 29 Max. Unit ns ns ns ns ns Table 7. Symbol ISD ISDM(1) VSD(2) trr Qrr IRRM trr Qrr IRRM Source drain diode Parameter Source-drain current Source-drain current (pulsed) Forward on voltage Reverse recovery time Reverse recovery charge Reverse recovery current Reverse recovery time Reverse recovery charge Reverse recovery current ISD=12A, VGS=0 ISD=12A, Tj=25C di/dt = 100A/s, VDD=30V, (see Figure 22) ISD=12A, Tj=150C di/dt = 100A/s, VDD=30V, (see Figure 22) 140 800 11 252 1890 15 Test condictions Min Typ. Max 12 48 1.5 Unit A A V ns nC A ns nC A 1. Pulse width limited by safe operating area 2. Pulsed: pulse duration=300s, duty cycle 1.5% 5/18 Electrical characteristics STB12NM50FD/-1 - STP12NM50FD/FP - STW14NM50FD 2.1 Figure 1. Electrical characteristics (curves) Safe operating area for TO-220/ DPAK/IPAK Figure 2. Thermal impedance for TO-220/ DPAK/IPAK Figure 3. Safe operating areafor TO-220FP Figure 4. Thermal impedance for TO-220FP Figure 5. Safe operating area for TO-247 Figure 6. Thermal impedance for TO-247 6/18 STB12NM50FD/-1 - STP12NM50FD/FP - STW14NM50FD Figure 7. Output characterisics Figure 8. Electrical characteristics Transfer characteristics Figure 9. Transconductance Figure 10. Static drain-source on resistance Figure 11. Gate charge vs gate-source voltage Figure 12. Capacitance variations 7/18 Electrical characteristics STB12NM50FD/-1 - STP12NM50FD/FP - STW14NM50FD Figure 14. Normalized on resistance vs temperature Figure 13. Normalized gate threshold voltage vs temperature Figure 15. Source-drain diode forward characteristics Figure 16. Normalized BVDSS vs temperature 8/18 STB12NM50FD/-1 - STP12NM50FD/FP - STW14NM50FD Test circuit 3 Test circuit Figure 18. Gate charge test circuit Figure 17. Switching times test circuit for resistive load Figure 19. Test circuit for inductive load Figure 20. Unclamped inductive load test switching and diode recovery times circuit Figure 21. Unclamped inductive waveform Figure 22. Switching time waveform 9/18 Package mechanical data STB12NM50FD/-1 - STP12NM50FD/FP - STW14NM50FD 4 Package mechanical data In order to meet environmental requirements, ST offers these devices in ECOPACK(R) packages. These packages have a Lead-free second level interconnect . The category of second level interconnect is marked on the package and on the inner box label, in compliance with JEDEC Standard JESD97. The maximum ratings related to soldering conditions are also marked on the inner box label. ECOPACK is an ST trademark. ECOPACK specifications are available at : www.st.com 10/18 STB12NM50FD/-1 - STP12NM50FD/FP - STW14NM50FD Package mechanical data TO-220 MECHANICAL DATA DIM. A b b1 c D E e e1 F H1 J1 L L1 L20 L30 mm. MIN. 4.40 0.61 1.15 0.49 15.25 10 2.40 4.95 1.23 6.20 2.40 13 3.50 16.40 28.90 3.75 2.65 3.85 2.95 0.147 0.104 TYP MAX. 4.60 0.88 1.70 0.70 15.75 10.40 2.70 5.15 1.32 6.60 2.72 14 3.93 MIN. 0.173 0.024 0.045 0.019 0.60 0.393 0.094 0.194 0.048 0.244 0.094 0.511 0.137 0.645 1.137 0.151 0.116 inch TYP. MAX. 0.181 0.034 0.066 0.027 0.620 0.409 0.106 0.202 0.052 0.256 0.107 0.551 0.154 oP Q 11/18 Package mechanical data STB12NM50FD/-1 - STP12NM50FD/FP - STW14NM50FD TO-247 MECHANICAL DATA mm. MIN. 4.85 2.20 1.0 2.0 3.0 0.40 19.85 15.45 5.45 14.20 3.70 18.50 3.55 4.50 5.50 3.65 5.50 0.140 0.177 0.216 14.80 4.30 0.560 0.14 0.728 0.143 0.216 TYP MAX. 5.15 2.60 1.40 2.40 3.40 0.80 20.15 15.75 MIN. 0.19 0.086 0.039 0.079 0.118 0.015 0.781 0.608 0.214 0.582 0.17 inch TYP. MAX. 0.20 0.102 0.055 0.094 0.134 0.03 0.793 0.620 DIM. A A1 b b1 b2 c D E e L L1 L2 oP oR S 12/18 STB12NM50FD/-1 - STP12NM50FD/FP - STW14NM50FD Package mechanical data D2PAK MECHANICAL DATA TO-247 MECHANICAL DATA mm. DIM. MIN. A A1 A2 B B2 C C2 D D1 E E1 G L L2 L3 M R V2 0 4.88 15 1.27 1.4 2.4 0.4 4 10 8.5 5.28 15.85 1.4 1.75 3.2 0.192 0.590 0.050 0.055 0.094 0.015 4.4 2.49 0.03 0.7 1.14 0.45 1.23 8.95 8 10.4 0.393 0.334 0.208 0.625 0.055 0.068 0.126 TYP MAX. 4.6 2.69 0.23 0.93 1.7 0.6 1.36 9.35 MIN. 0.173 0.098 0.001 0.027 0.044 0.017 0.048 0.352 0.315 TYP. MAX. 0.181 0.106 0.009 0.036 0.067 0.023 0.053 0.368 inch 3 1 13/18 Package mechanical data STB12NM50FD/-1 - STP12NM50FD/FP - STW14NM50FD TO-220FP MECHANICAL DATA mm. MIN. 4.4 2.5 2.5 0.45 0.75 1.15 1.15 4.95 2.4 10 16 28.6 9.8 2.9 15.9 9 3 30.6 10.6 3.6 16.4 9.3 3.2 1.126 .0385 0.114 0.626 0.354 0.118 TYP MAX. 4.6 2.7 2.75 0.7 1 1.7 1.7 5.2 2.7 10.4 MIN. 0.173 0.098 0.098 0.017 0.030 0.045 0.045 0.195 0.094 0.393 0.630 1.204 0.417 0.141 0.645 0.366 0.126 inch TYP. MAX. 0.181 0.106 0.108 0.027 0.039 0.067 0.067 0.204 0.106 0.409 DIM. A B D E F F1 F2 G G1 H L2 L3 L4 L5 L6 L7 O A B L3 L6 L7 F1 F D G1 H F2 L2 L5 E 123 L4 14/18 G STB12NM50FD/-1 - STP12NM50FD/FP - STW14NM50FD Package mechanical data TO-262 (I2PAK) MECHANICAL DATA mm. DIM. MIN. A A1 b b1 c c2 D e e1 E L L1 L2 4.40 2.40 0.61 1.14 0.49 1.23 8.95 2.40 4.95 10 13 3.50 1.27 TYP MAX. 4.60 2.72 0.88 1.70 0.70 1.32 9.35 2.70 5.15 10.40 14 3.93 1.40 MIN. 0.173 0.094 0.024 0.044 0.019 0.048 0.352 0.094 0.194 0.393 0.511 0.137 0.050 TYP. MAX. 0.181 0.107 0.034 0.066 0.027 0.052 0.368 0.106 0.202 0.410 0.551 0.154 0.055 inch 15/18 Packaging mechanical data STB12NM50FD/-1 - STP12NM50FD/FP - STW14NM50FD 5 Packaging mechanical data D2PAK FOOTPRINT TAPE AND REEL SHIPMENT REEL MECHANICAL DATA DIM. A B C D G N T 1.5 12.8 20.2 24.4 100 30.4 26.4 13.2 mm MIN. MAX. 330 0.059 0.504 0.520 0795 0.960 1.039 3.937 1.197 BULK QTY 1000 inch MIN. MAX. 12.992 TAPE MECHANICAL DATA DIM. A0 B0 D D1 E F K0 P0 P1 P2 R T W mm MIN. 10.5 15.7 1.5 1.59 1.65 11.4 4.8 3.9 11.9 1.9 50 0.25 23.7 24.3 MAX. 10.7 15.9 1.6 1.61 1.85 11.6 5.0 4.1 12.1 2.1 inch MIN. MAX. 0.413 0.421 0.618 0.626 0.059 0.063 0.062 0.063 0.065 0.073 0.449 0.456 0.189 0.197 0.153 0.161 0.468 0.476 0.075 0.082 1.574 0.35 0.0098 0.0137 0.933 0.956 BASE QTY 1000 * on sales type 16/18 STB12NM50FD/-1 - STP12NM50FD/FP - STW14NM50FD Revision history 6 Revision history Table 8. Date 03-May-2006 Revision history Revision 3 New template Changes 17/18 STB12NM50FD/-1 - STP12NM50FD/FP - STW14NM50FD Please Read Carefully: Information in this document is provided solely in connection with ST products. STMicroelectronics NV and its subsidiaries ("ST") reserve the right to make changes, corrections, modifications or improvements, to this document, and the products and services described herein at any time, without notice. All ST products are sold pursuant to ST's terms and conditions of sale. Purchasers are solely responsible for the choice, selection and use of the ST products and services described herein, and ST assumes no liability whatsoever relating to the choice, selection or use of the ST products and services described herein. No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted under this document. If any part of this document refers to any third party products or services it shall not be deemed a license grant by ST for the use of such third party products or services, or any intellectual property contained therein or considered as a warranty covering the use in any manner whatsoever of such third party products or services or any intellectual property contained therein. UNLESS OTHERWISE SET FORTH IN ST'S TERMS AND CONDITIONS OF SALE ST DISCLAIMS ANY EXPRESS OR IMPLIED WARRANTY WITH RESPECT TO THE USE AND/OR SALE OF ST PRODUCTS INCLUDING WITHOUT LIMITATION IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE (AND THEIR EQUIVALENTS UNDER THE LAWS OF ANY JURISDICTION), OR INFRINGEMENT OF ANY PATENT, COPYRIGHT OR OTHER INTELLECTUAL PROPERTY RIGHT. UNLESS EXPRESSLY APPROVED IN WRITING BY AN AUTHORIZE REPRESENTATIVE OF ST, ST PRODUCTS ARE NOT DESIGNED, AUTHORIZED OR WARRANTED FOR USE IN MILITARY, AIR CRAFT, SPACE, LIFE SAVING, OR LIFE SUSTAINING APPLICATIONS, NOR IN PRODUCTS OR SYSTEMS, WHERE FAILURE OR MALFUNCTION MAY RESULT IN PERSONAL INJURY, DEATH, OR SEVERE PROPERTY OR ENVIRONMENTAL DAMAGE. Resale of ST products with provisions different from the statements and/or technical features set forth in this document shall immediately void any warranty granted by ST for the ST product or service described herein and shall not create or extend in any manner whatsoever, any liability of ST. ST and the ST logo are trademarks or registered trademarks of ST in various countries. Information in this document supersedes and replaces all information previously supplied. The ST logo is a registered trademark of STMicroelectronics. All other names are the property of their respective owners. (c) 2006 STMicroelectronics - All rights reserved STMicroelectronics group of companies Australia - Belgium - Brazil - Canada - China - Czech Republic - Finland - France - Germany - Hong Kong - India - Israel - Italy - Japan Malaysia - Malta - Morocco - Singapore - Spain - Sweden - Switzerland - United Kingdom - United States of America www.st.com 18/18 |
Price & Availability of STW14NM50FD |
|
|
All Rights Reserved © IC-ON-LINE 2003 - 2022 |
[Add Bookmark] [Contact Us] [Link exchange] [Privacy policy] |
Mirror Sites : [www.datasheet.hk]
[www.maxim4u.com] [www.ic-on-line.cn]
[www.ic-on-line.com] [www.ic-on-line.net]
[www.alldatasheet.com.cn]
[www.gdcy.com]
[www.gdcy.net] |