View MKT365_4203394.PDF datasheet online --- IC-ON-LINE

Datasheet File OCR Text:

BC Components
Product specification
Metallized polyester film capacitors
MKT RADIAL EPOXY LACQUERED TYPE
MKT 365/366/367
PITCH 5 mm (kinked, straight and bent back leads) PITCH 7.5 mm (kinked and straight leads)
handbook, full pagewidth
365
366
367
CBA774
Fig.1 Simplified outlines.
FEATURES * Low-inductive wound cell of metallized (PETP) film * Cell protected by epoxy lacquer * Radial leads of solder-coated wire * Resistant to solvents and rinsing liquids. APPLICATIONS * Blocking and coupling * Bypass and energy reservoir. DETAIL SPECIFICATION For more detailed data and test requirements see "Type detail specification HQN-384-02/105".
QUICK REFERENCE DATA DESCRIPTION Capacitance range (E12 series) Capacitance tolerance Rated (DC) voltage Rated (AC) voltage Climatic category Rated temperature Maximum application temperature Tangent of loss angle at 10 kHz Reference specification Performance grade 10%; 5% 63 V; 100 V; 250 V; 400 V 40 V; 63 V; 160 V; 220 V 55/100/56 85 C 100 C 100 x 10-4 IEC 60384-2 grade 1 (long life) VALUE 0.01 to 1.0 F
1999 Apr 29
79
BC Components
Product specification
Metallized polyester film capacitors
COMPOSITION OF CATALOGUE NUMBER TYPE AND PITCHES 365 5.0 mm
MKT 365
MULTIPLIER (nF) 0.1 1 CAPACITANCE (numerically) 10 100 2 3 4 5
Example: 104 = 10 x 10 = 100 nF
2222
365 XX XX X
TYPE
PACKAGING
LEAD CONFIGURATION kinked leads; H = 16.0 mm; P0 = 12.7 mm bent back kinked leads; H = 16.0 mm; P0 = 12.7 mm kinked leads; H = 16.0 mm; P0 = 12.7 mm bent back kinked leads; H = 16.0 mm; P0 = 12.7 mm
C-TOL 10% 5% 10% 5% 10% 5% 10% 5%
63 V 75 76 15 16 71 72 11 12
100 V 85 86 25 26 81 82 21 22
250 V - - 45 46 - - 41 42
400 V - - 55 56 - - 51 52
ammopack 365 taped on reel
1999 Apr 29
80
BC Components
Product specification
Metallized polyester film capacitors
MKT 366/367
TYPE AND PITCHES 366 367 5.0 mm 7.5 mm CAPACITANCE (numerically)
MULTIPLIER (nF) 0.1 1 10 100 2 3 4 5
Example: 104 = 10 x 10 = 100 nF
2222
36.
XX XX X
TYPE
PACKAGING
LEAD CONFIGURATION kinked; lead length 4.0 mm
C-TOL 10% 5% 10% 5% 10% 5% 10% 5% 10% 5% 10% 5% 10% 5% 10% 5%
63 V 75 76 71 72 75 76 71 72 63 V 15 16 11 12 15 16 11 12
100 V 85 86 81 82 85 86 81 82 100 V 25 26 21 22 25 26 21 22
250 V - - - - - - - - 250 V 45 46 41 42 45 46 41 42
400 V - - - - - - - - 400 V 55 56 51 52 55 56 51 52
366
loose in box kinked; lead length 17.0 mm straight; lead length 4.0 mm
367
loose in box straight; lead length 22.0 mm
Available on request with pitch = 7.5 mm kinked; lead length 4.0 mm 366 loose in box kinked; lead length 17.0 mm straight; lead length 4.0 mm 367 loose in box straight; lead length 22.0 mm
1999 Apr 29
81
BC Components
Product specification
Metallized polyester film capacitors
MKT 365/366/367 GENERAL DATA
MKT 365/366/367
PITCH 5 mm (kinked and straight leads)
l
b 1.5
l
b
handbook, full pagewidth
seating plane(1)
(2)
h lt
1.3
h
lt P dt dt
P
CBA775
A
(1) Hole 1.0 for dt = 0.5 mm. (2) 0 < 50.
Fig.4 Outline.
Specific reference data for the 63 V DC capacitors DESCRIPTION Tangent of loss angle: C 0.1 F 0.1 F < C 0.47 F 0.47 F < C 1.0 F Rated voltage pulse slope (dU/dt)R at 63 V (DC) R between leads, for C 0.33 F at 10 V; 1 minute RC between leads, for C > 0.33 F at 100 V; 1 minute R between interconnecting leads and casing; 100 V; 1 minute Withstanding voltage DC (cut off current 10 mA); rise time 100 V/s Available 63 V DC versions PACKAGING(1) Ammopack Taped on reel Loose in box Loose in box Notes 1. For SPQ refer to this handbook, chapter "Packaging information". 2. H = in-tape height; for detailed specifications refer to this handbook, chapter "Packaging information". 1999 Apr 29 82 LEAD PITCH CONFIGURATION (mm) 5 5 5 5 5 5 FIRST 9 DIGITS OF CATALOGUE NUMBER C-tol = 10% 2222 365 75... 2222 365 71... 2222 366 75... 2222 366 71... 2222 367 75... 2222 367 71... C-tol = 5% 2222 365 76... 2222 365 72... 2222 366 76... 2222 366 72... 2222 367 76... 2222 367 72... preferred on request on request on request on request on request VALUE at 1 kHz 75 x 10-4 75 x 10-4 75 x 10-4 at 10 kHz 130 x 10-4 130 x 10-4 130 x 10-4 110 V/s >15000 M >5000 s >30000 M 100 V; 1 minute at 100 kHz 225 x 10-4 300 x 10-4 -
DIMENSIONS
ORDERING
H = 16.0 mm; note 2 lt = 4.0 +1.0/-0.5 mm lt = 17.0 4.0 mm lt = 4.0 +1.0/-0.5 mm lt = 22.0 4.0 mm kinked
straight
BC Components
Product specification
Metallized polyester film capacitors
URdc = 63 V; URac = 40 V
MKT 365/366/367
Pitch 5 mm (kinked and straight leads) CATALOGUE NUMBER
C (F)
DIMENSIONS(1) bmax x hmax x lmax (mm)
MASS (g)
AMMOPACK; H = 16.0 mm C-tol = 10% catalogue number(2) C-tol = 5% last 5 digits(2)
Pitch = 5.0 +0.4/-0.2 mm; dt = 0.50 0.05 mm; A = 1.7 0.3 mm 0.047 0.056 0.068 0.082 0.1 0.12 0.15 0.18 0.22 0.27 0.33 0.39 0.47 0.56 0.68 0.82 1.0 Notes 1. Dimensions in brackets for straight leads. 2. The shading indicates preferred types. 4.0 x 13.0 (8.0) x 7.3 4.0 x 13.5 (8.5) x 7.3 4.2 x 13.5 (8.5) x 7.3 4.5 x 14.0 (9.0) x 7.3 4.5 x 14.5 (10.5) x 7.3 4.5 x 15.5 (11.5) x 7.3 5.0 x 14.0 (10.0) x 7.3 5.5 x 14.5 (10.5) x 7.3 5.5 x 15.0 (11.0) x 7.3 5.5 x 15.5 (11.5) x 7.3 0.3 0.4 0.4 0.4 0.4 0.4 0.4 0.4 0.5 0.5 4.0 x 12.5 (7.5) x 7.3 0.3 2222 365 75473 2222 365 75563 2222 365 75683 2222 365 75823 2222 365 75104 2222 365 75124 2222 365 75154 2222 365 75184 2222 365 75224 2222 365 75274 2222 365 75334 2222 365 75394 2222 365 75474 2222 365 75564 2222 365 75684 2222 365 75824 2222 365 75105 .. 76473 .. 76563 .. 76683 .. 76823 .. 76104 .. 76124 .. 76154 .. 76184 .. 76224 .. 76274 .. 76334 .. 76394 .. 76474 .. 76564 .. 76684 .. 76824 .. 76105
1999 Apr 29
83
BC Components
Product specification
Metallized polyester film capacitors
MKT 365/366/367 GENERAL DATA
MKT 365/366/367
PITCH 5 mm (bent back leads) PITCH 7.5 mm (kinked and straight leads)
l
handbook, full pagewidth
l
b 1.5
l
b
seating plane(1)
(2)
h
(2)
h
1.3
h
lt
lt
lt
P
A
P
A
dt
P
dt
CBA948
(1) Hole 1.0 for dt = 0.6 mm. (2) 0 < 50.
Fig.5 Outline.
Specific reference data for the 63 V DC capacitors DESCRIPTION Tangent of loss angle: C 0.1 F 0.1 F < C 0.47 F 0.47 F < C 1.0 F Rated voltage pulse slope (dU/dt)R at 63 V (DC) R between leads, for C 0.33 F at 10 V; 1 minute RC between leads, for C > 0.33 F at 100 V; 1 minute R between interconnecting leads and casing; 100 V; 1 minute Withstanding (DC) voltage (cut off current 10 mA); rise time 100 V/s Available 63 V DC versions PACKAGING(1) Ammopack Taped on reel Loose in box Loose in box Notes 1. For SPQ refer to this handbook, chapter "Packaging information". 2. H = in-tape height; for detailed specifications refer to this handbook, chapter "Packaging information". DIMENSIONS H = 16.0 mm; note 2 lt = 4.0 +1.0/-0.5 mm lt = 17.0 4.0 mm lt = 4.0 +1.0/-0.5 mm lt = 22.0 4.0 mm LEAD PITCH CONFIGURATION (mm) bent back kinked straight 5 5 7.5 7.5 7.5 7.5 FIRST 9 DIGITS OF CATALOGUE NUMBER C-tol = 10% 2222 365 15... 2222 365 11... 2222 366 15... 2222 366 11... 2222 367 15... 2222 367 11... C-tol = 5% 2222 365 16... 2222 365 12... 2222 366 16... 2222 366 12... 2222 367 16... 2222 367 12... ORDERING preferred on request on request on request on request on request VALUE at 1 kHz 75 x 10-4 75 x 10-4 75 x 10-4 at 10 kHz 130 x 10-4 130 x 10-4 130 x 10-4 110 V/s >15000 M >5000 s >30000 M 100 V; 1 minute at 100 kHz 225 x 10-4 300 x 10-4 -
1999 Apr 29
84
BC Components
Product specification
Metallized polyester film capacitors
URdc = 63 V; URac = 40 V
MKT 365/366/367
Pitch 5 mm (bent back leads) PACKAGING
C (F)
DIMENSIONS bmax x hmax x lmax (mm)
MASS (g)
AMMOPACK; H = 16.0 mm C-tol = 10% catalogue number(1) C-tol = 5% last 5 digits(1)
Pitch = 5.0 +0.4/-0.2 mm; dt = 0.60 0.06 mm; A = 1.7 0.3 mm(2) 0.12 0.15 0.18 0.22 0.27 0.33 0.39 0.47 0.56 0.68 0.82 1.0 Notes 1. The shading indicates preferred types. 2. Pitch = 7.5 mm (kinked and straight leads) is available on request; for dimensions and package quantities see "Type detail specification HQN-384-02/105". 5.5 x 15.0 x 10.0 0.7 4.5 x 14.0 x 10.0 5.0 x 14.5 x 10.0 0.5 0.6 4.0 x 13.5 x 10.0 0.4 2222 365 15124 2222 365 15154 2222 365 15184 2222 365 15224 2222 365 15274 2222 365 15334 2222 365 15394 2222 365 15474 2222 365 15564 2222 365 15684 2222 365 15824 2222 365 15105 .. 16124 .. 16154 .. 16184 .. 16224 .. 16274 .. 16334 .. 16394 .. 16474 .. 16564 .. 16684 .. 16824 .. 16105
1999 Apr 29
85
BC Components
Product specification
Metallized polyester film capacitors
MKT 365/366/367 GENERAL DATA
l b 1.5
handbook, full pagewidth
MKT 365/366/367
PITCH 5 mm (kinked and straight leads)
l b
seating plane(1)
(2)
h lt
1.3
h
lt P dt dt
P
CBA775
A
(1) Hole 1.0 for dt = 0.5 mm. (2) 0 < 50.
Fig.6 Outline.
Specific reference data for the 100 V DC capacitors DESCRIPTION Tangent of loss angle: C 0.1 F 0.1 F < C 0.47 F Rated voltage pulse slope (dU/dt)R at 100 V (DC) R between leads, for C 0.33 F at 100 V; 1 minute RC between leads, for C > 0.33 F at 100 V; 1 minute R between interconnecting leads and casing; 100 V; 1 minute Withstanding (DC) voltage (cut off current 10 mA); rise time 100 V/s Available 100 V DC versions PACKAGING(1) Ammopack Taped on reel Loose in box Loose in box Notes 1. For SPQ refer to this handbook, chapter "Packaging information". 2. H = in-tape height; for detailed specifications refer to this handbook, chapter "Packaging information". LEAD PITCH CONFIGURATION (mm) 5 5 5 5 5 5 FIRST 9 DIGITS OF CATALOGUE NUMBER C-tol = 10% 2222 365 85... 2222 365 81... 2222 366 85... 2222 366 81... 2222 367 85... 2222 367 81... C-tol = 5% 2222 365 86... 2222 365 82... 2222 366 86... 2222 366 82... 2222 367 86... 2222 367 82... preferred on request on request on request on request on request VALUE at 1 kHz 75 x 10-4 75 x 10-4 at 10 kHz 130 x 10-4 130 x 10-4 110 V/s >15000 M >5000 s >30000 M 160 V; 1 minute at 100 kHz 225 x 10-4 225 x 10-4
DIMENSIONS
ORDERING
H = 16.0 mm; note 2 lt = 4.0 +1.0/-0.5 mm lt = 17.0 4.0 mm lt = 4.0 +1.0/-0.5 mm lt = 22.0 4.0 mm kinked
straight
1999 Apr 29
86
BC Components
Product specification
Metallized polyester film capacitors
URdc = 100 V; URac = 63 V
MKT 365/366/367
Pitch 5 mm (kinked and straight leads) CATALOGUE NUMBER
C (F)
DIMENSIONS(1) bmax x hmax x lmax (mm)
MASS (g)
AMMOPACK; H = 16.0 mm C-tol = 10% catalogue number(2) C-tol = 5% last 5 digits(2)
Pitch = 5.0 +0.4/-0.2 mm; dt = 0.50 0.05 mm; A = 1.7 0.3 mm 0.01 0.012 0.015 0.018 0.022 0.027 0.033 0.039 0.047 0.056 0.068 0.082 0.1 0.12 0.15 0.18 0.22 0.27 Notes 1. Dimensions in brackets for straight leads. 2. The shading indicates preferred types. 4.2 x 13.5 (8.5) x 7.3 4.5 x 14.0 (9.0) x 7.3 0.4 0.4 4.0 x 13.5 (8.5) x 7.3 0.4 4.0 x 13.0 (8.0) x 7.3 0.3 4.0 x 12.5 (7.5) x 7.3 0.3 3.7 x 12.5 (7.5) x 7.3 0.3 2222 365 85103 2222 365 85123 2222 365 85153 2222 365 85183 2222 365 85223 2222 365 85273 2222 365 85333 2222 365 85393 2222 365 85473 2222 365 85563 2222 365 85683 2222 365 85823 2222 365 85104 2222 365 85124 2222 365 85154 2222 365 85184 2222 365 85224 2222 365 85274 .. 86103 .. 86123 .. 86153 .. 86183 .. 86223 .. 86273 .. 86333 .. 86393 .. 86473 .. 86563 .. 86683 .. 86823 .. 86104 .. 86124 .. 86154 .. 86184 .. 86224 .. 86274
1999 Apr 29
87
BC Components
Product specification
Metallized polyester film capacitors
MKT 365/366/367 GENERAL DATA
MKT 365/366/367
PITCH 5 mm (bent back leads) PITCH 7.5 mm (kinked and straight leads)
l
handbook, full pagewidth
l
b 1.5
l
b
seating plane(1)
(2)
h
(2)
h
1.3
h
lt
lt
lt
P
A
P
A
dt
P
dt
CBA948
(1) Hole 1.0 for dt = 0.6 mm. (2) 0 < 50.
Fig.7 Outline.
Specific reference data for the 100 V DC capacitors DESCRIPTION Tangent of loss angle: C 0.1 F 0.1 F < C 0.47 F Rated voltage pulse slope (dU/dt)R at 100 V (DC) R between leads, for C 0.33 F at 100 V; 1 minute RC between leads, for C > 0.33 F at 100 V; 1 minute R between interconnecting leads and casing; 100 V; 1 minute Withstanding (DC) voltage (cut off current 10 mA); rise time 100 V/s Available 100 V DC versions PACKAGING(1) Ammopack Taped on reel Loose in box Loose in box Notes 1. For SPQ refer to this handbook, chapter "Packaging information". 2. H = in-tape height; for detailed specifications refer to this handbook, chapter "Packaging information". LEAD PITCH CONFIGURATION (mm) bent back kinked straight 5 5 7.5 7.5 7.5 7.5 FIRST 9 DIGITS OF CATALOGUE NUMBER C-tol = 10% 2222 365 25... 2222 365 21... 2222 366 25... 2222 366 21... 2222 367 25... 2222 367 21... C-tol = 5% 2222 365 26... 2222 365 22... 2222 366 26... 2222 366 22... 2222 367 26... 2222 367 22... preferred on request on request on request on request on request VALUE at 1 kHz 75 x 10-4 75 x 10-4 at 10 kHz 130 x 10-4 130 x 10-4 110 V/s >15000 M >5000 s >30000 M 160 V; 1 minute at 100 kHz 225 x 10-4 225 x 10-4
DIMENSIONS
ORDERING
H = 16.0 mm; note 2 lt = 4.0 +1.0/-0.5 mm lt = 17.0 4.0 mm lt = 4.0 +1.0/-0.5 mm lt = 22.0 4.0 mm
1999 Apr 29
88
BC Components
Product specification
Metallized polyester film capacitors
URdc = 100 V; URac = 63 V
MKT 365/366/367
Pitch 5 mm (bent back leads) CATALOGUE NUMBER
C (F)
DIMENSIONS bmax x hmax x lmax (mm)
MASS (g)
AMMOPACK; H = 16.0 mm C-tol = 10% catalogue number(1) C-tol = 5% last 5 digits(1)
Pitch = 5.0 +0.4/-0.2 mm; dt = 0.60 0.06 mm; A = 1.7 0.3 mm(2) 0.039 0.047 0.056 0.068 0.082 0.1 0.12 0.15 0.18 0.22 0.27 0.33 0.39 0.47 Notes 1. The shading indicates preferred types. 2. Pitch = 7.5 mm (kinked and straight leads) is available on request; for dimensions and package quantities see "Type detail specification HQN-384-02/105". 6.0 x 15.5 x 10.5 0.7 4.5 x 14.0 x 10.5 5.0 x 14.5 x 10.5 5.5 x 15.0 x 10.5 0.5 0.6 0.7 4.0 x 13.5 x 10.0 0.4 2222 365 25393 2222 365 25473 2222 365 25563 2222 365 25683 2222 365 25823 2222 365 25104 2222 365 25124 2222 365 25154 2222 365 25184 2222 365 25224 2222 365 25274 2222 365 25334 2222 365 25394 2222 365 25474 .. 26393 .. 26473 .. 26563 .. 26683 .. 26823 .. 26104 .. 26124 .. 26154 .. 26184 .. 26224 .. 26274 .. 26334 .. 26394 .. 26474
1999 Apr 29
89
BC Components
Product specification
Metallized polyester film capacitors
MKT 365/366/367 GENERAL DATA
MKT 365/366/367
PITCH 5 mm (bent back leads) PITCH 7.5 mm (kinked and straight leads)
l
handbook, full pagewidth
l
b 1.5
l
b
seating plane(1)
(2)
h
(2)
h
1.3
h
lt
lt
lt
P
A
P
A
dt
P
dt
CBA948
(1) Hole 1.0 for dt = 0.6 mm. (2) 0 < 50.
Fig.8 Outline.
Specific reference data for the 250 V DC capacitors DESCRIPTION Tangent of loss angle: C 0.1 F 0.1 F < C 0.15 F Rated voltage pulse slope (dU/dt)R at 250 V (DC) R between leads, for C 0.33 F at 100 V; 1 minute R between interconnected leads and casing; 100 V; 1 minute Withstanding (DC) voltage (cut off current 10 mA); rise time 100 V/s Available 250 V DC versions PACKAGING(1) Ammopack Taped on reel Loose in box Loose in box Notes 1. For SPQ refer to this handbook, chapter "Packaging information". 2. H = in-tape height; for detailed specifications refer to this handbook, chapter "Packaging information". LEAD PITCH CONFIGURATION (mm) bent back kinked straight 5 5 7.5 7.5 7.5 7.5 FIRST 9 DIGITS OF CATALOGUE NUMBER C-tol = 10% 2222 365 45... 2222 365 41... 2222 366 45... 2222 366 41... 2222 367 45... 2222 367 41... C-tol = 5% 2222 365 46... 2222 365 42... 2222 366 46... 2222 366 42... 2222 367 46... 2222 367 42... preferred on request on request on request on request on request VALUE at 1 kHz 75 x 10-4 75 x 10-4 at 10 kHz 130 x 10-4 120 x 10-4 70 V/s >30000 M >30000 M 400 V; 1 minute at 100 kHz 225 x 10-4 225 x 10-4
DIMENSIONS
ORDERING
H = 16.0 mm; note 2 lt = 4.0 +1.0/-0.5 mm lt = 17.0 4.0 mm lt = 4.0 +1.0/-0.5 mm lt = 22.0 4.0 mm
1999 Apr 29
90
BC Components
Product specification
Metallized polyester film capacitors
URdc = 250 V; URac = 160 V
MKT 365/366/367
Pitch 5 mm (bent back leads) CATALOGUE NUMBER
C (F)
DIMENSIONS bmax x hmax x lmax (mm)
MASS (g)
AMMOPACK; H = 16.0 mm C-tol = 10% catalogue number(1) C-tol = 5% last 5 digits(1)
Pitch = 5.0 +0.4/-0.2 mm; dt = 0.60 0.06 mm; A = 1.7 0.3 mm(2) 0.018 0.022 0.027 0.033 0.039 0.047 0.056 0.068 0.082 0.1 0.12 0.15 Notes 1. The shading indicates preferred types. 2. Pitch = 7.5 mm (kinked and straight leads) is available on request; for dimensions and package quantities see "Type detail specification HQN-384-02/105". 4.5 x 13.0 x 10.0 5.0 x 13.5 x 10.0 5.5 x 14.0 x 10.0 5.5 x 15.5 x 10.0 0.5 0.6 0.6 0.7 4.0 x 13.5 x 10.0 0.4 2222 365 45183 2222 365 45223 2222 365 45273 2222 365 45333 2222 365 45393 2222 365 45473 2222 365 45563 2222 365 45683 2222 365 45823 2222 365 45104 2222 365 45124 2222 365 45154 .. 46183 .. 46223 .. 46273 .. 46333 .. 46393 .. 46473 .. 46563 .. 46683 .. 46823 .. 46104 .. 46124 .. 46154
1999 Apr 29
91
BC Components
Product specification
Metallized polyester film capacitors
MKT 365/366/367 GENERAL DATA
MKT 365/366/367
PITCH 5 mm (bent back leads) PITCH 7.5 mm (kinked and straight leads)
l
handbook, full pagewidth
l
b 1.5
l
b
seating plane(1)
(2)
h
(2)
h
1.3
h
lt
lt
lt
P
A
P
A
dt
P
dt
CBA948
(1) Hole 1.0 for dt = 0.6 mm. (2) 0 < 50.
Fig.9 Outline.
Specific reference data for the 400 V DC capacitors DESCRIPTION Tangent of loss angle: C 0.056 F C 0.1 F Rated voltage pulse slope (dU/dt)R at 400 V (DC) R between leads, for C 0.33 F at 100 V; 1 minute R between interconnected leads and casing; 100 V; 1 minute Withstanding (DC) voltage (cut off current 10 mA); rise time 100 V/s Available 400 V DC versions PACKAGING(1) Ammopack Taped on reel Loose in box Loose in box Notes 1. For SPQ refer to this handbook, chapter "Packaging information". 2. H = in-tape height; for detailed specifications refer to this handbook, chapter "Packaging information". LEAD PITCH CONFIGURATION (mm) bent back kinked straight 5 5 7.5 7.5 7.5 7.5 FIRST 9 DIGITS OF CATALOGUE NUMBER C-tol = 10% 2222 365 55... 2222 365 51... 2222 366 55... 2222 366 51... 2222 367 55... 2222 367 51... C-tol = 5% 2222 365 56... 2222 365 52... 2222 366 56... 2222 366 52... 2222 367 56... 2222 367 52... preferred on request on request on request on request on request VALUE at 1 kHz 75 x 10-4 75 x 10-4 at 10 kHz 120 x 10-4 130 x 10-4 110 V/s >30000 M >30000 M 640 V; 1 minute at 100 kHz 200 x 10-4 225 x 10-4
DIMENSIONS
ORDERING
H = 16.0 mm; note 2 lt = 4.0 +1.0/-0.5 mm lt = 17.0 4.0 mm lt = 4.0 +1.0/-0.5 mm lt = 22.0 4.0 mm
1999 Apr 29
92
BC Components
Product specification
Metallized polyester film capacitors
URdc = 400 V; URac = 220 V
MKT 365/366/367
Pitch 5 mm (bent back leads) CATALOGUE NUMBER
C (F)
DIMENSIONS bmax x hmax x lmax (mm)
MASS (g)
AMMOPACK; H = 16.0 mm C-tol = 10% catalogue number(1) C-tol = 5% last 5 digits(1)
Pitch = 5.0 +0.4/-0.2 mm; dt = 0.60 0.06 mm; A = 1.7 0.3 mm(2) 0.0033 0.0039 0.0047 0.0056 0.0068 0.0082 0.01 0.012 0.015 0.018 0.022 0.027 0.033 0.039 0.047 0.056 Notes 1. The shading indicates preferred types. 2. Pitch = 7.5 mm (kinked and straight leads) is available on request; for dimensions and package quantities see "Type detail specification HQN-384-02/105". 4.5 x 13.0 x 10.0 5.0 x 13.5 x 10.0 4.0 x 12.5 x 10.0 4.5 x 13.0 x 10.0 5.0 x 13.5 x 10.0 5.0 x 13.5 x 10.0 5.5 x 14.0 x 10.0 0.6 0.7 0.4 0.5 0.5 0.6 0.7 4.0 x 13.5 x 10.0 0.4 2222 365 55332 2222 365 55392 2222 365 55472 2222 365 55562 2222 365 55682 2222 365 55822 2222 365 55103 2222 365 55123 2222 365 55153 2222 365 55183 2222 365 55223 2222 365 55273 2222 365 55333 2222 365 55393 2222 365 55473 2222 365 55563 .. 56332 .. 56392 .. 56472 .. 56562 .. 56682 .. 56822 .. 56103 .. 56123 .. 56153 .. 56183 .. 56223 .. 56273 .. 56333 .. 56393 .. 56473 .. 56563
1999 Apr 29
93
BC Components
Product specification
Metallized polyester film capacitors
CONSTRUCTION Description * Low-inductive wound cell of metallized polyethylene terephthalate film * Protected by a hard, water repellent, solvent resistant epoxy lacquer * Radial leads, solder coated: - Copper clad steel wire for pitch = 5 mm (kinked and straight leads) - Copper wire for pitch = 5 mm (bent back leads) and pitch = 7.5 mm (kinked and straight leads). Mounting NORMAL USE
MKT 365/366/367
The capacitors are designed for mounting on printed-circuit boards. The capacitors packed in bandoliers are designed for mounting on printed-circuit boards by means of automatic insertion machines. For detailed tape specifications refer to this handbook, chapter "Packaging information". SPECIFIED METHOD OF MOUNTING TO WITHSTAND VIBRATION
AND SHOCK
In order to withstand vibration and shock tests, it must be ensured that the underside of the kinks are in good contact with the printed-circuit board: * For pitches 15 mm the capacitors shall be mechanically fixed by the leads. * For larger pitches the capacitors shall be mounted in the same way and the body clamped. Storage temperature * Storage temperature: Tstg = -25 to +40 C with RH maximum 80% without condensation. RATINGS AND CHARACTERISTICS REFERENCE CONDITIONS Unless otherwise specified all electrical values apply at an ambient free air temperature of 23 1 C, an atmospheric pressure of 86 to 106 kPa and a relative humidity of 50 2%. For reference testing, a conditioning period shall be applied over 96 4 hours by heating the products in a circulating air oven at the rated temperature and a relative humidity not exceeding 20%.
metallized polyester film
handbook, halfpage
metal spray layer
connecting wire
CBA073
Fig.10 Construction.
1999 Apr 29
94
BC Components
Product specification
Metallized polyester film capacitors
CHARACTERISTICS Capacitance
MKT 365/366/367
CBA074
handbook, full pagewidth
2
C C (%) 1
0
-1
-2
-3 102
103
104
f (Hz)
105
Fig.11 Capacitance change as a function of frequency: typical curve.
CBA919
handbook, full pagewidth
6
C C (%) 4
2
0
max.
-2
typical
-4 min. -6 -60
-20
20
60
Tamb (C)
100
Fig.12 Capacitance change at 1 kHz as a function of ambient free air temperature.
1999 Apr 29
95
BC Components
Product specification
Metallized polyester film capacitors
Impedance
MKT 365/366/367
CBA076
102 handbook, full pagewidth Impedance () 10
63V ;1 F
MKT 365
63V ; 10
0n
F
1
10-1
10-2
10-3 104
105
106
107
f (Hz)
108
Fig.13 Impedance as a function of frequency: typical curves.
Maximum DC and AC voltage as a function of temperature
CBA086
handbook, full pagewidth
1.2
factor 1.0
0.8
0.6
0.4
0.2
0 -60
-40
-20
0
20
40
60
80 Tamb (C)
100
Fig.14 Multiplying factor for DC and AC voltage as a function of temperature.
1999 Apr 29
96
BC Components
Product specification
Metallized polyester film capacitors
Maximum RMS voltage (sinewave) as a function of frequency
MKT 365/366/367
102 handbook, full pagewidth
CBA077
MKT 365/366/367
AC voltage (V)
10
47
10
nF
F
0n
47 0 10 nF 00 nF
1 10
102
103
104
f (Hz)
105
Fig.15 AC voltage (RS value) as a function of frequency at Tamb 85 C for Rdc = 63 V.
102 handbook, full pagewidth
CBA776
MKT 365/366/367
AC voltage (V)
10
47
10
nF
F
0n
47 0 10 nF 00 nF
1 10
102
103
104
f (Hz)
105
Fig.16 AC voltage (RMS value) as a function of frequency at 85 C < Tamb 100 C for URdc = 63 V.
1999 Apr 29
97
BC Components
Product specification
Metallized polyester film capacitors
MKT 365/366/367
102 handbook, full pagewidth
CBA078
MKT 365/366/367
AC voltage (V)
10
nF
10
47
nF
10
0n F 47 0n F
1 10
102
103
104
f (Hz)
105
Fig.17 AC voltage (RMS value) as a function of frequency at Tamb 85 C, for URdc = 100 V.
102 handbook, full pagewidth
CBA777
MKT 365/366/367
AC voltage (V)
10
10
nF
1 10
nF 10 0 47 nF 0n F
47
102
103
104
f (Hz)
105
Fig.18 AC voltage (RMS value) as a function of frequency at 85 C < Tamb 100 C for URdc = 100 V.
1999 Apr 29
98
BC Components
Product specification
Metallized polyester film capacitors
MKT 365/366/367
103 handbook, full pagewidth MKT 365/366/367 AC voltage (V)
CBA079
102
18
47
nF
nF
10
1 10
102
103
104
f (Hz)
105
Fig.19 AC voltage (RMS value) as a function of frequency at Tamb 85 C, for URdc = 250 V.
103 handbook, full pagewidth MKT 365/366/367 AC voltage (V)
CBA778
102
10
18
47
nF
nF
1 10
102
103
104
f (Hz)
105
Fig.20 AC voltage (RMS value) as a function of frequency at 85 C < Tamb 100 C for URdc = 250 V.
1999 Apr 29
99
BC Components
Product specification
Metallized polyester film capacitors
MKT 365/366/367
103 handbook, full pagewidth MKT 365/366/367 AC voltage (V)
CBA080
102
3.3 nF
15
nF
10
1 10
102
103
104
f (Hz)
105
Fig.21 AC voltage (RMS value) as a function of frequency at Tamb 85 C, for URdc = 400 V.
103 handbook, full pagewidth MKT 365/366/367 AC voltage (V)
CBA779
102
3.3
10
15
nF
nF
1 10
102
103
104
f (Hz)
105
Fig.22 AC voltage (RMS value) as a function of frequency at 85 C < Tamb 100 C for URdc = 400 V.
Maximum RMS current (sinewave) as a function of frequency The maximum RMS current is defined by I ac = x C x U ac . Uac is the maximum AC voltage depending on the ambient temperature in Figs 15 to 22.
1999 Apr 29
100
BC Components
Product specification
Metallized polyester film capacitors
Tangent of loss angle
MKT 365/366/367
103 handbook, full pagewidth
CBA087
dissipation factor (x 10-4)
102
10 102
103
104
f (Hz)
105
Fig.23 Tangent of loss angle as a function of frequency: typical curve.
Insulation resistance
CBA088
105 RC (s)
104
103
102 -50
0
50
Tamb (C)
100
Fig.24 RC product as a function of ambient free air temperature: typical curve.
1999 Apr 29
101
BC Components
Product specification
Metallized polyester film capacitors
MKT 365/366/367
Maximum allowed component temperature rise (T) as a function of the ambient temperature (Tamb)
CBA821
handbook, full pagewidth
20
T (C)
15
10
5
0 -60
-40
-20
0
20
40
60
80 Tamb (C)
100
Fig.25 Maximum allowed component temperature rise as a function of the ambient temperature.
Heat conductivity (G) as a function of pitch and capacitor body thickness in mW/C Table 1 Heat conductivity ORIGINAL PITCH (mm) 5 1.5 2.0 2.5 2.5 3.0 3.5 - 7.5 3.0 3.5 3.5 4.0 4.0 4.5 5.0
bmax (mm) 3.5 4.0 4.5 5.0 5.5 6.0 6.5
Power dissipation and maximum component temperature rise The power dissipation must be limited in order not to exceed the maximum allowed component temperature rise as a function of the free air ambient temperature. Power dissipation can be calculated in accordance with chapter "Introduction", section "Maximum power dissipation". The component temperature rise (T) can be measured (see section "Measuring the component temperature" for more details) or calculated by T = P G : * T = component temperature rise (C). * P = power dissipation of the component (mW). * G = heat conductivity of the component (mW/C). 1999 Apr 29 102
BC Components
Product specification
Metallized polyester film capacitors
Measuring the component temperature A thermocouple must be attached to the capacitor body; see Fig.26.
MKT 365/366/367
handbook, halfpage
thermocouple
CBA771
Fig.26 Mounting the thermocouple.
The temperature is measured in unloaded (Tamb) and maximum loaded condition (Tc). The temperature rise is given by T = T c - T amb . To avoid radiation or convection, the capacitor should be tested in a wind-free box.
1999 Apr 29
103
BC Components
Product specification
Metallized polyester film capacitors
Application note and limiting conditions
MKT 365/366/367
These capacitors are not suitable for mains applications as across-the-line capacitors without additional protection, as described below. These mains applications are strictly regulated by safety standards and therefore electromagnetic interference suppression capacitors conforming to the standards must be used. To select the capacitor for a certain application, the following conditions must be checked: 1. The peak voltage (Up) shall not be greater than the rated DC voltage (URdc). 2. The peak-to-peak voltage (Up-p) shall not be greater than the maximum Up-p to avoid the ionisation inception level. 3. The voltage pulse slope (dU/dt) shall not exceed the rated voltage pulse slope in an RC-circuit at rated voltage and without ringing. If the pulse voltage is lower than the rated DC voltage, the rated voltage pulse slope may be multiplied by URdc and divided by the applied voltage. For all other pulses following equation must be fulfilled: dU 2 dU 2 x ------- x dt < U Rdc x ------- dt- dt- rated
0 T
T is the pulse duration. The rated voltage pulse slope is valid for ambient temperatures up to 85 C. For higher temperatures a derating factor of 3% per K shall be applied. 4. The maximum component surface temperature rise must be lower than the limits in 0. 5. Since in circuits used at voltages over 280 V peak-to-peak the risk for an intrinsically active flammability after a capacitor breakdown (short circuit) increases, it is recommended that the power to the component is limited to 100 times the values mentioned in Table 1. 6. When using these capacitors as across-the-line capacitor in the input filter for mains applications or as series connected with an impedance to the mains the applicant must guarantee that following conditions are fulfilled in any case (spikes and surge voltages from the mains included). VOLTAGE CONDITIONS FOR 6 ABOVE ALLOWED VOLTAGES Maximum continuous RMS voltage Maximum temporary RMS overvoltage (<24 hours) Maximum peak voltage (Vo-p) (<2 s) Tamb 85 C URac 1.25 x URac 1.6 x URdc 85 C < Tamb 100 C 0.8 x URac URac 1.3 x URdc
1999 Apr 29
104
BC Components
Product specification
Metallized polyester film capacitors
Example C = 330 nF - 63 V used for the voltage signal shown in Fig.27. Up-p = 40 V; Up = 35 V; T1 = 100 s; T2 = 200 s. The ambient temperature is 35 C. Checking the conditions: 1. The peak voltage Up = 35 V is lower than 63 V (DC). 2. The peak-to-peak voltage 40 V is lower than 2 x 2 x 40V (AC) = 113 U p - p . 3. The voltage pulse slope dU/dt = 40 V/100 s = 0.4 V/s. This is lower than 110 V/s (see specific reference data for each version). 4. The dissipated power is 16.2 mW as calculated with Fourier terms.
MKT 365/366/367
16.2 mW The temperature rise for bmax = 4.5 mm and pitch = 5 mm will be -------------------------------- = 6.5 C . 2.5 mW C This is lower than 15 C temperature rise at 35 C; see Fig.25. 5. Not applicable. 6. Not applicable.
voltage
handbook, full pagewidth
Up
Up-p
time T1 T2
CBA865
Fig.27 Voltage signal.
1999 Apr 29
105
BC Components
Product specification
Metallized polyester film capacitors
MARKING Product marking COUNTRY OF ORIGIN: BELGIUM The capacitors are marked on the top with black ink (see Figs 28 and 29), containing the following information: 1. Rated capacitance code in nF or F 2. Tolerance on rated capacitance: K = 10%; J = 5% 3. Rated (DC) voltage.
handbook, halfpage
MKT 365/366/367
0.047 K 63
CBA091
Fig.28 Example of marking for capacitors with pitch = 5 mm (kinked and straight leads).
handbook, halfpage
470 K 100
CBA092
Fig.29 Example of marking for capacitors with pitch = 5 mm (bent back leads) and pitch = 7.5 mm (kinked and straight leads).
COUNTRY OF ORIGIN: PRC (PEOPLE'S REPUBLIC OF CHINA) The capacitors are marked on the side with black ink (see Fig.30), containing the following information: 1. Rated capacitance code in nF or F 2. Tolerance on rated capacitance: K = 10%; J = 5% 3. Rated (DC) voltage.
handbook, halfpage
100n K100
CBA465
Fig.30 Example of marking for capacitors with pitch = 5 and 7.5 mm.
1999 Apr 29
106
BC Components
Product specification
Metallized polyester film capacitors
Package marking The package containing the capacitors is marked as shown in Fig.31.
MKT 365/366/367
Please note: In due time BC COMPONENTS will replace PHILIPS COMPONENTS
handbook, full pagewidth
Barcode label marking LINE 1 2 3 4 5 MARKING EXPLANATION Manufacturer's name Country of origin Sub-family Type description Capacitance value in F, tolerance, voltage and climatic category ("IEC 60068-1") Batchnumber (only for capacitors from PRC) * Country of origin: Belgium Preference origin code: A Country of origin in code: 170 (Belgium) Responsible production centre: HQ Work order: WO * Country of origin: China Preference origin code: N Country of origin in code: 260 (PRC) Responsible production centre: 07 8 Product type description Quantity and production period, year and week code Product code (12NC) 9
CCA337
1. 2. 3. 4. 5.
6.
6 7
7.
8.
9.
10.
10
Fig.31 Barcode label.
1999 Apr 29
107
BC Components
Product specification
Metallized polyester film capacitors
QUICK REFERENCE TEST REQUIREMENTS (see note 1) TEST Robustness of leads Tensile strength: "IEC 60068-2-21" Bending: "IEC 60068-2-21" Resistance to soldering heat: "IEC 60068-2-20" Component solvent resistance Robustness of component Vibration: "IEC 60068-2-6" Shock: "IEC 60068-2-27" Climatic sequence Dry heat: "IEC 60068-2-2" Damp heat cyclic, first cycle: "IEC 60068-2-30": Cold: "IEC 60068-2-1" Damp heat, remaining cycles: "IEC 60068-2-30" Other applicable tests Damp heat steady state: "IEC 60068-2-3" 56 days; 40 C; 90 to 95% RH 2 hours; -55 C 16 hours; 100 C 10 to 55 Hz; amplitude 0.75 mm or acceleration 98 m/s2; 6 hours half sinewave; 490 m/s2; 11 ms load 10 N; 10 s load 5 N; 4 x 90 solder bath: 260 C; 10 s isopropyl alcohol; 23 C; 5 minutes PROCEDURE (quick reference)
MKT 365/366/367
REQUIREMENTS
no visible damage legible marking C/C 2% tan 30 x 10-4; note 2
C/C 3% tan 30 x 10-4; note 2
C/C 5% tan 50 x 10-4; note 2 Rins 50% of specified value
C/C 5% tan 50 x 10-4; note 2 Rins 50% of specified value
Endurance (DC): "IEC 60384-2"
2000 hours: 1.25 x URdc; 85 C 1 x URdc; 100 C 2000 hours; 100 C body temperature: 100 C; bath temperature: 260 C; dwell time: 5 s
C/C 5% tan 30 x 10-4; note 2 Rins 50% of specified value C/C 3% tan 30 x 10-4; note 2 C/C 2% (C 10 nF) C/C 1% (C > 10 nF) tan 30 x 10-4; note 2
Heat storage: "IEC 60384-2" Resistance to soldering heat with preheating: "IEC 60384-2" Notes
1. For detailed information, see "Type detail specification HQN-384-02/105". 2. Measuring frequency 100 kHz for C 470 nF and 10 kHz for C > 470 nF.
1999 Apr 29
108

▲Up To Search▲

Price & Availability of MKT365

	To Download MKT365 Datasheet File
If you can't view the Datasheet, Please click here to try to view without PDF Reader .