|
If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
Datasheet File OCR Text: |
9X14 mm SMD, 3.3V, LVPECL Frequency Range: Frequency Stability: CCPD-920 Model ree dF ea oHS nt L R plia m Co 50MHz to 150MHz 20, 25, 50ppm (0C to 70C) 25, 50ppm (-40C to 85C) Temperature Range: 0C to 70C (Option X) -40C to 85C Storage: -55C to 120C Input Voltage: 3.3V 0.3V Input Current: 88mA Max Output: Differential LVPECL Symmetry: 45/55% Max @ 50% Vdd Rise/Fall Time: 1ns Max @ 20% to 80% Vdd Linearity: 10% Max Logic: Terminated to Vdd-2V into 50 ohms Logic "0" "0" = Vcc-1.85V Min, Vcc-1.62V Max Logic "1" "1" = Vcc-1.02V Min, Vcc-0.81V Max Disable Time 200ns Max Start-up Time 1ms Typ., 2ms Max Phase Jitter: 12KHz to 80MHz 0.5psec Typ., 1psec RMS Max Phase Noise: 10Hz -65dBc/Hz Typical 100Hz -98dBc/Hz Typical 1KHz -125dBc/Hz Typical 10KHz -140dBc/Hz Typical 100KHz - 100MHz -145dBc/Hz Typical Differential LVPECL Clock Oscillator Designed to meet today's requirements for 3.3V Differential LVPECL applications. The CCPD920 is produced using our cost saving FR5 PCB and UM-1 overtone crystal technology. This design offers considerable cost savings over other HFF XO's products. Also available in 14 pin dip fully hermetic package. Aging: <3ppm 1st/yr, <1ppm every year thereafter SUGGESTED PAD LAYOUT 0.560 (14.2) Bottom View 0.560 (14.2) 0.210 (5.3) 0.050 (1.27) 0.360 (9.14) CRYSTEK P/N Frequency Date Code 1 6 0.100 (2.54) 2 5 3 4 0.040 (1.01) 0.070 (1.77) 0.090 (2.28) 0.280 (7.11) 0.200 (5.08) RECOMMENDED REFLOW SOLDERING PROFILE TEMPERATURE 260C 217C 200C 150C Ramp-Up 3C/Sec Max. Critical Temperature Zone Ramp-Down 6C/Sec. Crystek Part Number Guide CCPD-920 X - 25 - 100.000 #1 #2 #3 #4 #5 Stability Indicator: #1 Crystek 9x14 SMD PECL OSC #2 Model 920 #3 Temp. Range: Blank = 0/70C, X=-40/85C #4 Stability: (see Table 1) #5 Frequency in MHz: 3 or 6 decimal places 20 = 0/70C(20ppm) 25 = 0/70C (25ppm) 50 = 0/70C (50ppm) 25 = -40/85C (25ppm) 50 = -40/85C (50ppm) Preheat 180 Secs. Max. 8 Minutes Max. 90 Secs. Max. 260C for 10 Secs. Max. NOTE: Reflow Profile with 240C peak also acceptable. Table 1 Example: CCPD-920X-25-100.000 = 3.3V, 45/55, -40/85C, 25ppm, 100.000 MHz Enable/Disable Function Pin 2 Output Pin Open Active "0" level Vcc-1.620V Max Active "1" level Vcc-1.025V Min Disabled Disabled State: Pin 4 will assume a fixed level of logic "0" Pin 5 will assume a fixed level of logic "1" Pad 1 2 3 4 5 6 Connection N/C E/D GND OUT COUT Vdd Specifications subject to change without notice. TD-051101 Rev. B |
Price & Availability of CCPD-920-50-100000 |
|
|
All Rights Reserved © IC-ON-LINE 2003 - 2022 |
[Add Bookmark] [Contact Us] [Link exchange] [Privacy policy] |
Mirror Sites : [www.datasheet.hk]
[www.maxim4u.com] [www.ic-on-line.cn]
[www.ic-on-line.com] [www.ic-on-line.net]
[www.alldatasheet.com.cn]
[www.gdcy.com]
[www.gdcy.net] |