Part Number Hot Search : 
B4229 7SZ12 MAX6965 FP400 D2N201LX 71711 PM7545BR 1541I
Product Description
Full Text Search
 

To Download ADG3242BCZ-SF3 Datasheet File

  If you can't view the Datasheet, Please click here to try to view without PDF Reader .  
 
 


  Datasheet File OCR Text:
 2.5 V/3.3 V, 2-Bit Common Control Level Translator Bus Switch ADG3242
FEATURES
225 ps propagation delay through the switch 4.5 switch connection between ports Data rate 1.5 Gbps 2.5 V/3.3 V supply operation Selectable level shifting/translation Level translation 3.3 V to 2.5 V 3.3 V to 1.8 V 2.5 V to 1.8 V Small signal bandwidth 710 MHz 8-lead SOT-23 package
FUNCTIONAL BLOCK DIAGRAM
A0 B0
A1
B1
04309-001
BE
Figure 1.
APPLICATIONS
3.3 V to 2.5 V voltage translation 3.3 V to 1.8 V voltage translation 2.5 V to 1.8 V voltage translation Bus switching Bus isolation Hot swap Hot plug Analog switch applications
GENERAL DESCRIPTION
The ADG3242 is a 2.5 V or 3.3 V, 2-bit, 2-port, common control digital switch. It is designed on a low voltage CMOS process, and provides low power dissipation, yet gives high switching speed and very low on resistance. This allows the inputs to be connected to the outputs without additional propagation delay or generating additional ground bounce noise. These switches are enabled by means of a common bus enable (BE) input signal. This digital switch allows a bidirectional signal to be switched when on. In the off condition, signal levels up to the supplies are blocked. This device is ideal for applications requiring level translation. When operated from a 3.3 V supply, level translation from 3.3 V inputs to 2.5 V outputs is allowed. Similarly, if the device is operated from a 2.5 V supply and 2.5 V inputs are applied, the device translates the outputs to 1.8 V. In addition, a level translating select pin (SEL) is included. When SEL is low, VCC is reduced internally, allowing for level translation between 3.3 V inputs and 1.8 V outputs. This makes the device suitable for applications requiring level translation between different supplies, such as converter to DSP/microcontroller interfacing.
PRODUCT HIGHLIGHTS
1. 2. 3. 4. 5. 3.3 V or 2.5 V supply operation. Extremely low propagation delay through switch. 4.5 switches connect inputs to outputs. Level/voltage translation. Tiny SOT-23 package.
Rev. A
Information furnished by Analog Devices is believed to be accurate and reliable. However, no responsibility is assumed by Analog Devices for its use, nor for any infringements of patents or other rights of third parties that may result from its use. Specifications subject to change without notice. No license is granted by implication or otherwise under any patent or patent rights of Analog Devices. Trademarks and registered trademarks are the property of their respective owners.
One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106, U.S.A. Tel: 781.329.4700 www.analog.com Fax: 781.461.3113 (c)2006 Analog Devices, Inc. All rights reserved.
ADG3242 TABLE OF CONTENTS
Features .............................................................................................. 1 Applications....................................................................................... 1 Functional Block Diagram .............................................................. 1 General Description ......................................................................... 1 Product Highlights ........................................................................... 1 Revision History ............................................................................... 2 Specifications..................................................................................... 3 Absolute Maximum Ratings............................................................ 4 ESD Caution.................................................................................. 4 Pin Configurations and Function Descriptions ........................... 5 Typical Performance Characteristics ............................................. 6 Terminology .................................................................................... 10 Timing Measurement Information .............................................. 11 Bus Switch Applications ................................................................ 12 Mixed Voltage Operation, Level Translation.......................... 12 3.3 V to 2.5 V Translation ......................................................... 12 2.5 V to 1.8 V Translation ......................................................... 12 3.3 V to 1.8 V Translation ......................................................... 12 Bus Isolation................................................................................ 13 Hot Plug and Hot Swap Isolation............................................. 13 Analog Switching ....................................................................... 13 High Impedance during Power-Up/Power-Down................. 13 Outline Dimensions ....................................................................... 14 Ordering Guide............................................................................... 14
REVISION HISTORY
9/06--Rev. 0 to Rev. A Updated Format..................................................................Universal Added Table 4.................................................................................... 5 Changes to the Ordering Guide.................................................... 14 8/03--Revision 0: Initial Version
Rev. A | Page 2 of 16
ADG3242 SPECIFICATIONS
VCC = 2.3 V to 3.6 V, GND = 0 V; all specifications TMIN to TMAX, unless otherwise noted. Table 1.
Parameter DC ELECTRICAL CHARACTERISTICS Input High Voltage Input Low Voltage Input Leakage Current Off State Leakage Current On State Leakage Current Maximum Pass Voltage Symbol VINH VINL II IOZ VP Conditions VCC = 2.7 V to 3.6 V VCC = 2.3 V to 2.7 V VCC = 2.7 V to 3.6 V VCC = 2.3 V to 2.7 V 0 A, B VCC 0 A, B VCC VA/VB = VCC = SEL = 3.3 V, IO = -5 A VA/VB = VCC = SEL = 2.5 V, IO = -5 A VA/VB = VCC = 3.3 V, SEL = 0 V, IO = -5 A f = 1 MHz f = 1 MHz f = 1 MHz f = 1 MHz CL = 50 pF, VCC = SEL = 3 V VCC = 3.0 V to 3.6 V; SEL = VCC VCC = 3.0 V to 3.6 V; SEL = 0 V VCC = 2.3 V to 2.7 V; SEL = VCC VCC = 3.0 V to 3.6 V; SEL = VCC VCC = 3.0 V to 3.6 V; SEL = 0 V VCC = 2.3 V to 2.7 V; SEL = VCC VCC = SEL = 3.3 V; VA/VB = 2 V VCC = SEL = 3.3 V; VA/VB = 2 V VCC = 3 V, SEL = VCC, VA = 0 V, IBA = 8 mA VCC = 3 V, SEL = VCC, VA = 1.7 V, IBA = 8 mA VCC = 2.3 V, SEL = VCC, VA = 0 V, IBA = 8 mA VCC = 2.3 V, SEL = VCC, VA = 1 V, IBA = 8 mA VCC = 3 V, SEL = 0 V, VA = 0 V, IBA = 8 mA VCC = 3 V, SEL = 0 V, VA = 1 V, IBA = 8 mA VCC = 3 V, SEL = VCC, VA = 0 V, IA = 8 mA VCC = 3 V, SEL = 0 V, VA = 0 V, IA = 8 mA 2.3 ICC ICC Digital inputs = 0 V or VCC; SEL = VCC Digital inputs = 0 V or VCC ; SEL = 0 V VCC = 3.6 V, BE = 3.0 V; SEL = VCC 0.01 0.1 0.15 1 1 1 1 1 1 3.2 3 3 3 2.5 2.5 1.5 45 4.5 12 5 9 5 12 0.1 0.1 Min 2.0 1.7 0.8 0.7 1 1 1 2.9 2.1 2.1 B Version 1 Typ 2 Max Unit V V V V A A A V V V pF pF pF pF 0.225 5 4.6 4 4 4 3.8 3.4 ns ps ns ns ns ns ns ns Gbps ps p-p V A mA A
2.0 1.5 1.5
0.01 0.01 0.01 2.5 1.8 1.8 3.5 3.5 7 4
CAPACITANCE 3 A Port Off Capacitance B Port Off Capacitance A, B Port On Capacitance Control Input Capacitance SWITCHING CHARACTERISTICS3 Propagation Delay A to B or B to A, tPD 4 Propagation Delay Matching 5 Bus Enable Time BE to A or B 6
CA OFF CB OFF CA, CB ON CIN tPHL, tPLH tPZH, tPZL
Bus Disable Time BE to A or B6
tPHZ, tPLZ
Maximum Data Rate Channel Jitter DIGITAL SWITCH On Resistance
RON
8 28 9 18 8 0.5 0.5 3.6 1 0.2 8
On Resistance Matching POWER REQUIREMENTS VCC Quiescent Power Supply Current Increase in ICC per Input 7
1 2
RON
Temperature range is as follows: B version: -40C to +85C. Typical values are at 25C, unless otherwise stated. 3 Guaranteed by design, not subject to production test. 4 The digital switch contributes no propagation delay other than the RC delay of the typical RON of the switch and the load capacitance when driven by an ideal voltage source. Because the time constant is much smaller than the rise/fall times of typical driving signals, it adds very little propagation delay to the system. Propagation delay of the digital switch when used in a system is determined by the driving circuit on the driving side of the switch and its interaction with the load on the driven side. 5 Propagation delay matching between channels is calculated from the on resistance matching and load capacitance of 50 pF. 6 See Timing Measurement Information section. 7 This current applies to the Control Pin BE only. The A and B ports contribute no significant ac or dc currents as they transition.
Rev. A | Page 3 of 16
ADG3242 ABSOLUTE MAXIMUM RATINGS
TA = 25C, unless otherwise noted. Table 2.
Parameter VCC to GND Digital Inputs to GND DC Input Voltage DC Output Current Operating Temperature Range Industrial (B Version) Storage Temperature Range Junction Temperature JA Thermal Impedance Lead Temperature, Soldering (10 sec) IR Reflow, Peak Temperature (<20 sec) Rating -0.5 V to +4.6 V -0.5 V to +4.6 V -0.5 V to +4.6 V 25 mA per channel -40C to +85C -65C to +150C 150C 206C/W 300C 235C
Stresses above those listed under Absolute Maximum Ratings may cause permanent damage to the device. This is a stress rating only; functional operation of the device at these or any other conditions above those indicated in the operational section of this specification is not implied. Exposure to absolute maximum rating conditions for extended periods may affect device reliability. Only one absolute maximum rating can be applied at any one time.
ESD CAUTION
Rev. A | Page 4 of 16
ADG3242 PIN CONFIGURATIONS AND FUNCTION DESCRIPTIONS
SEL VCC BE
ADI DIE MARK
BE 1 A0 2
8
VCC SEL
04309-002
A0
ADG3242
7
TOP VIEW A1 3 (Not to Scale) 6 B0 GND 4
5
ADG3242
TOP VIEW (Not to Scale) B0 B1 A1 GND
B1
Figure 2. Pin Configuration
Figure 3. Die Pad Configuration (Die size: 550 m x 820 m)
Table 3. Pin Function Descriptions
Pin No. 1 2 3 4 5 6 7 8 Mnemonic BE A0 A1 GND B1 B0 SEL VCC Description Bus Enable (Active Low). Port A0, Input or Output. Port A1, Input or Output. Ground (0 V) Reference. Port B1, Input or Output. Port B0, Input or Output. Level Translation Select. Positive Power Supply Voltage.
Table 4. Die Pad Coordinates (Measured from the Center of the Die)
Mnemonic BE A0 A1 GND B1 B0 SEL VCC X(m) +93 +102 +168 +126 -88 -168 -111 -7 Y(m) +303 +150 -139 -266 -247 +121 +279 +303
Table 5. Truth Table
BE L L H
1
SEL 1 L H X
Function A0 = B0, A1 = B1, 3.3 V to 1.8 V Level Shifting. A0 = B0, A1 = B1, 3.3 V to 2.5 V/2.5 V to 1.8 V Level Shifting. Disconnect.
SEL = 0 V only when VDD = 3.3 V 10%.
Rev. A | Page 5 of 16
04309-100
ADG3242 TYPICAL PERFORMANCE CHARACTERISTICS
40 35 30 25 TA = 25C SEL = VCC 20 VCC = 3V VCC = 3.3V SEL = VCC 15
RON ()
RON ()
VCC = 3.3V 20 15
10 +85C +25C
10 5 0
VCC = 3.6V
5 -40C
04309-003 04309-006 04309-008 04309-007
0
0.5
1.0
1.5
2.0
2.5
3.0
3.5
0
0
0.5
1.0 VA/VB (V)
1.5
2.0
VA/VB (V)
Figure 4. On Resistance vs. Input Voltage
40 35 30 25 TA = 25C SEL = VCC VCC = 2.3V
Figure 7. On Resistance vs. Input Voltage for Different Temperatures
15 VCC = 2.5V SEL = VCC
10
RON ()
RON ()
VCC = 2.5V 20 15 VCC = 2.7V 10 5 0
+85C -40C 5 +25C
VA/VB (V)
04309-004
0
0.5
1.0
1.5
2.0
2.5
3.0
0
0
0.5 VA/VB (V)
1.0
1.2
Figure 5. On Resistance vs. Input Voltage
40 35 30 25 TA = 25C SEL = 0V VCC = 3V
Figure 8. On Resistance vs. Input Voltage for Different Temperatures
3.0 TA = 25C SEL = VCC IO = -5A VCC = 3.6V
2.5
2.0
VOUT (V)
RON ()
VCC = 3.3V 20 15 VCC = 3.6V 10 5 0
VCC = 3.3V 1.5 VCC = 3V
1.0
0.5
VA/VB (V)
04309-005
0
0.5
1.0
1.5
2.0
2.5
3.0
3.5
0
0
0.5
1.0
1.5
2.0
2.5
3.0
3.5
VA/VB (V)
Figure 6. On Resistance vs. Input Voltage
Figure 9. Pass Voltage vs. VCC
Rev. A | Page 6 of 16
ADG3242
2.5 TA = 25C SEL = VCC IO = -5A VCC = 2.7V 2.5 3.0 TA = 25C VA = 0V BE = 0
2.0
2.0
VOUT (V)
VOUT (V)
1.5 VCC = 2.3V 1.0
VCC = 2.5V
1.5
VCC = 3.3V; SEL = 0V VCC = SEL = 3.3V
1.0 0.5
0.5 VCC = SEL = 2.5V
0
04309-009
VA/VB (V)
IO (A)
Figure 10. Pass Voltage vs. VCC
2.5 TA = 25C SEL = 0V IO = -5A VCC = 3.6V 2.5 3.0
Figure 13. Output Low Characteristic
TA = 25C VA = VCC BE = 0
2.0
2.0
VOUT (V)
VCC = 3.3V VCC = 3V 1.0
VOUT (V)
1.5
VCC = SEL = 3.3V 1.5
1.0 0.5
VCC = SEL = 2.5V
0.5 VCC = 3.3V; SEL = 0V
04309-013
0
04309-010
0
0.5
1.0
1.5
2.0
2.5
3.0
3.5
0 -0.10
-0.08
-0.06 IO (A)
-0.04
-0.02
0
VA/VB (V)
Figure 11. Pass Voltage vs. VCC
500 450 400 350 TA = 25C
Figure 14. Output High Characteristic
0 TA = 25C SEL = VCC ONOFF CL = 1nF
-0.2
VCC = 2.5V
QINJ (pC)
ICC (A)
300 250 200 150 100 50 0 0 5 10 15 20 VCC = 3.3V; SEL = 0V
VCC = SEL = 3.3V
-0.4 VCC = 3.3V
-0.6
-0.8
VCC = SEL = 2.5V
-1.0
04309-011
ENABLE FREQUENCY (MHz)
VA/VB (V)
Figure 12. ICC vs. Enable Frequency
Figure 15. Charge Injection vs. Source Voltage
Rev. A | Page 7 of 16
04309-014
25
30
35
40
45
50
-1.2
0
0.5
1.0
1.5
2.0
2.5
3.0
04309-012
0
0.5
1.0
1.5
2.0
2.5
3.0
0
0
0.02
0.04
0.06
0.08
0.10
ADG3242
2 1 0
4.0 3.5 3.0 VCC = SEL = 3.3V ENABLE
ATTENUATION (dB)
-1
TIME (ns)
-2 -3 -4 -5 -6 -7 -8 0.03 TA = 25C VCC = 3.3V/2.5V SEL = VCC VIN = 0dBm N/W ANALYZER: RL = RS = 50
04309-015
2.5 2.0 1.5 1.0 0.5 0 -40 DISABLE VCC = 3.3V; SEL = 0V
0.1
1
10 FREQUENCY (MHz)
100
1000
-20
0
20
40
60
80
TEMPERATURE (C)
Figure 16. Bandwidth vs. Frequency
0 -10 -20 TA = 25C VCC = 3.3V/2.5V SEL = VCC VIN = 0dBm N/W ANALYZER: RL = RS = 50 4.0 3.5 3.0 2.5
Figure 19. Enable/Disable Time vs. Temperature
ENABLE VCC = SEL = 2.5V
ATTENUATION (dB)
-30 -40 -50 -60 -70 -80 -90
TIME (ns)
2.0 1.5 1.0 0.5 0 -40
DISABLE
04309-016
0.1
1
10 FREQUENCY (MHz)
100
1000
-20
0
20
40
60
80
TEMPERATURE (C)
Figure 17. Crosstalk vs. Frequency
0 -10 -20 TA = 25C VCC = 3.3V/2.5V SEL = VCC VIN = 0dBm N/W ANALYZER: RL = RS = 50
Figure 20. Enable/Disable Time vs. Temperature
100 90 80 70 VCC = SEL = 3.3V VIN = 1.5V p-p 20dB ATTENUATION
ATTENUATION (dB)
-30 -40 -50 -60 -70 -80 -90
JITTER (ps p-p)
60 50 40 30 20 10
04309-017
1
10 FREQUENCY (MHz)
100
1000
0.7
0.9
1.1
1.3
1.5
1.7
1.9
DATA RATE (Gbps)
Figure 18. Off Isolation vs. Frequency
Figure 21. Jitter vs. Data Rate; PRBS 31
Rev. A | Page 8 of 16
04309-020
-100 0.1
0 0.5
04309-019
-100 0.03
04309-018
ADG3242
100 95 90 85 VCC = SEL = 3.3V VIN = 1.5V p-p 20dB ATTENUATION
EYE WIDTH (%)
80 75 70 65 60 55 % EYE WIDTH = ((CLOCK PERIOD - JITTER p-p)/CLOCK PERIOD) x 100% 0.7 0.9 1.1 1.3 1.5 1.7 1.9
04309-021
50 0.5
DATA RATE (Gbps)
Figure 22. Eye Width vs. Data Rate; PRBS 31
Figure 24. Eye Pattern; 1.244 Gbps, VCC = 2.5 V; PRBS 31
Figure 23. Eye Pattern; 1.5 Gbps, VCC = 3.3 V; PRBS 31
04309-022
50mV/DIV 200ps/DIV
VCC = 3.3V SEL = 3.3V VIN = 1.5V p-p
20dB ATTENUATION TA = 25C
Rev. A | Page 9 of 16
04309-023
20mV/DIV 200ps/DIV
VCC = 2.5V SEL = 2.5V VIN = 1.5V p-p
20dB ATTENUATION TA = 25C
ADG3242 TERMINOLOGY
VCC Positive power supply voltage. GND Ground (0 V) reference. VINH Minimum input voltage for Logic 1. VINL Maximum input voltage for Logic 0. II Input leakage current at the control inputs. IOZ Off state leakage current. It is the maximum leakage current at the switch pin in the off state. IOL On state leakage current. It is the maximum leakage current at the switch pin in the on state. VP Maximum pass voltage. The maximum pass voltage relates to the clamped output voltage of an NMOS device when the switch input voltage is equal to the supply voltage. RON Ohmic resistance offered by a switch in the on state. It is measured at a given voltage by forcing a specified amount of current through the switch. RON On resistance match between any two channels, that is, RON max to RON min. CX OFF Off switch capacitance. CX ON On switch capacitance. CIN Control input capacitance. This consists of BE and SEL. ICC Quiescent power supply current. This current represents the leakage current between the VCC and ground pins. It is measured when all control inputs are at logic high or low level and the switches are off. ICC Extra power supply current component for the EN control input when the input is not driven at the supplies. tPLH, tPHL Data propagation delay through the switch in the on state. Propagation delay is related to the RC time constant RON x CL, where CL is the load capacitance. tPZH, tPZL Bus enable times. These are the times taken to cross the VT in response to the control signal, BE. tPHZ, tPLZ Bus disable times. These are the times taken to place the switch in the high impedance off state in response to the control signal. They are measured as the time taken for the output voltage to change by V from the original quiescent level, with reference to the logic level transition at the control input. (See Figure 27 for enable and disable times.) Max Data Rate Maximum rate at which data can be passed through the switch. Channel Jitter Peak-to-peak value of the sum of the deterministic and random jitter of the switch channel.
Rev. A | Page 10 of 16
ADG3242 TIMING MEASUREMENT INFORMATION
For the following load circuit and waveforms, the notation that is used is VIN and VOUT where: VIN = VA and VOUT = VB, or VIN = VB and VOUT = VA
VCC SW1 2 x VCC
VIN = 0V VOUT SW1 @ 2VCC ENABLE CONTROL INPUT BE DISABLE VINH VT 0V
tPZL
VCC VT
tPLZ
VCC VL + V VL
VT 0V
RT
CL
RL
0V
Figure 27. Enable and Disable Times
NOTES 1. PULSE GENERATOR FOR ALL PULSES: tR 2.5ns, tF 2.5ns, FREQUENCY 10MHz. 2. CL INCLUDES BOARD, STRAY, AND LOAD CAPACITANCES. 3. RT IS THE TERMINATION RESISTOR, SHOULD BE EQUAL TO ZOUT OF THE PULSE GENERATOR.
Table 6. Switch Position
Test tPLZ, tPZL tPHZ, tPZH S1 2 x VCC GND
04309-024
Figure 25. Load Circuit
VIH CONTROL INPUT BE VT
tPLH
VOUT
tPLH
0V VH VL
04309-025
VT
Figure 26. Propagation Delay
Table 7. Test Conditions
Symbol RL V CL VT VCC = 3.3 V 0.3 V (SEL = VCC) 500 300 50 1.5 VCC = 2.5 V 0.2 V (SEL = VCC) 500 150 30 0.9 VCC = 3.3 V 0.3 V (SEL = 0 V) 500 150 30 0.9 Unit mV pF V
Rev. A | Page 11 of 16
04309-026
PULSE GENERATOR
VIN DUT
VOUT
RL
GND
VOUT SW1 @ GND
tPZH
VIN = VCC
tPHZ
VH VH - V
ADG3242 BUS SWITCH APPLICATIONS
MIXED VOLTAGE OPERATION, LEVEL TRANSLATION
Bus switches provide an ideal solution for interfacing between mixed voltage systems. The ADG3242 is suitable for applications where voltage translation from 3.3 V technology to a lower voltage technology is needed. This device translates from 3.3 V to 1.8 V, from 2.5 V to 1.8 V, or from a bidirectional 3.3 V directly to 2.5 V. Figure 28 shows a block diagram of a typical application in which a user needs to interface between a 3.3 V ADC and a 2.5 V microprocessor. The microprocessor does not have 3.3 V tolerant inputs, therefore, placing the ADG3242 between the two devices allows the devices to communicate easily. The bus switch directly connects the two blocks, therefore introducing minimal propagation delay, timing skew, or noise.
3.3V 3.3V 2.5V
2.5 V TO 1.8 V TRANSLATION
When VCC is 2.5 V (SEL = 2.5 V) and the input signal range is 0 V to VCC, the maximum output signal is also clamped within a voltage threshold below the VCC supply. In this case, the output is limited to approximately 1.8 V, as shown in Figure 32.
2.5V
2.5V
ADG3242
1.8V
04309-030
Figure 31. 2.5 V to 1.8 V Voltage Translation, SEL = 2.5 VCC
VOUT 1.8V 2.5V SUPPLY SEL = 2.5V
ADG3242
0V
3.3 V TO 2.5 V TRANSLATION
When VCC is 3.3 V (SEL = 3.3 V) and the input signal range is 0 V to VCC, the maximum output signal is clamped to within a voltage threshold below the VCC supply. In this case, the output is limited to 2.5 V, as shown in Figure 30. This device can be used for translation from 2.5 V to 3.3 V devices and also between two 3.3 V devices.
3.3V
SWITCH INPUT
2.5V
Figure 32. 2.5 V to 1.8 V Voltage Translation, SEL = VCC
3.3 V TO 1.8 V TRANSLATION
The ADG3242 offers the option of interfacing between a 3.3 V device and a 1.8 V device. This is possible through use of the SEL pin. The SEL pin is an active low control pin. SEL activates internal circuitry in the ADG3242 that allows voltage translation between 3.3 V devices and 1.8 V devices. When VCC is 3.3 V and the input signal range is 0 V to VCC, the maximum output signal is clamped to 1.8 V, as shown in Figure 34. To do this, the SEL pin must be tied to Logic 0. If SEL is unused, it can be tied directly to VCC.
3.3V
3.3V
2.5V
ADG3242
2.5V 2.5V
04309-028
Figure 29. 3.3 V to 2.5 V Voltage Translation, SEL = VCC
VOUT 2.5V 3.3V SUPPLY SEL = 3.3V
3.3V
ADG3242
04309-031
Figure 28. Level Translation Between a 3.3 V ADC and a 2.5 V Microprocessor
04309-027
3.3V ADC
2.5V MICROPROCESSOR
SWITCH OUTPUT
VIN
1.8V
04309-032
SWITCH OUTPUT
Figure 33. 3.3 V to 1.8 V Voltage Translation, SEL = 0 V
04309-029
VIN 0V SWITCH INPUT 3.3V
VOUT 1.8V
3.3V SUPPLY SEL = 0V
SWITCH OUTPUT
Figure 30. 3.3 V to 2.5 V Voltage Translation, SEL = VCC
0V
SWITCH INPUT
3.3V
Figure 34. 3.3 V to 1.8 V Voltage Translation, SEL = 0 V
Rev. A | Page 12 of 16
04309-033
VIN
ADG3242
ADG3242 ADG3242
BUS ISOLATION
A common requirement of bus architectures is low capacitance loading of the bus. Such systems require bus bridge devices that extend the number of loads on the bus without exceeding the specifications. Because the ADG3242 is designed specifically for applications that do not need drive, yet require simple logic functions, it solves this requirement. The device isolates access to the bus, thus minimizing capacitance loading.
CPU
PLUG-IN CARD (1)
CARD I/O
RAM
PLUG-IN CARD (2)
CARD I/O
BUS
Figure 36. ADG3242 in a Hot Plug Application
LOAD A LOAD C
BUS/ BACKPLANE
04309-034
BUS SWITCH LOCATION
LOAD B
LOAD D
Figure 35. Location of Bus Switched in a Bus Isolation Application
HOT PLUG AND HOT SWAP ISOLATION
The ADG3242 is suitable for hot swap and hot plug applications. The output signal of the ADG3242 is limited to a voltage that is below the VCC supply, as shown in Figure 30, Figure 32, and Figure 34. Thus, the switch acts like a buffer to take the impact from the hot insertion, protecting vital and expensive chipsets from damage. In hot plug applications, the system cannot be shut down when new hardware is being added. To overcome this, a bus switch can be positioned on the backplane between the bus devices and the hot plug connectors. The bus switch is turned off during hot plug. Figure 36 shows a typical example of this type of application.
There are many systems, such as docking stations, PCI boards for servers, and line cards for telecommunications switches, that require the ability to handle hot swapping. If the bus can be isolated prior to insertion or removal, there is more control over the hot swap event. This isolation can be achieved using bus switches. The bus switches are positioned on the hot swap card between the connector and the devices. During hot swap, the ground pin of the hot swap card must connect to the ground pin of the backplane before connecting to any other signal or power pins.
ANALOG SWITCHING
Bus switches are used in many analog switching applications, for example, video graphics. Bus switches can have lower on resistance, smaller on and off channel capacitance, and better frequency performance than their analog counterparts. The bus switch channel itself, consisting solely of an NMOS switch, limits the operating voltage (see Figure 4 for a typical plot), but in many cases, this does not present an issue.
HIGH IMPEDANCE DURING POWER-UP/POWERDOWN
To ensure the high impedance state during power-up or powerdown, BE must be tied to VCC through a pull-up resistor. The minimum value of the resistor is determined by the current sinking capability of the driver.
Rev. A | Page 13 of 16
04309-035
ADG3242 OUTLINE DIMENSIONS
2.90 BSC
8 7 6 5
1.60 BSC
1 2 3 4
2.80 BSC
PIN 1 INDICATOR 0.65 BSC 1.30 1.15 0.90 1.95 BSC
1.45 MAX 0.38 0.22
0.22 0.08 8 4 0
0.15 MAX
SEATING PLANE
0.60 0.45 0.30
COMPLIANT TO JEDEC STANDARDS MO-178-BA
Figure 37. 8-Lead Small Outline Transistor Package [SOT-23] (RJ-8) Dimensions shown in millimeters
ORDERING GUIDE
Model ADG3242BRJ-R2 ADG3242BRJ-REEL ADG3242BRJ-REEL7 ADG3242BRJZ-REEL71 ADG3242BCZ-SF31
1
Temperature Range -40C to +85C -40C to +85C -40C to +85C -40C to +85C -40C to +85C
Package Description 8-Lead Small Outline Transistor [SOT-23] 8-Lead Small Outline Transistor [SOT-23] 8-Lead Small Outline Transistor [SOT-23] 8-Lead Small Outline Transistor [SOT-23] Die
Package Option RJ-8 RJ-8 RJ-8 RJ-8 Chip
Branding SCA SCA SCA SOU
Z = Pb-free part.
Rev. A | Page 14 of 16
ADG3242 NOTES
Rev. A | Page 15 of 16
ADG3242 NOTES
(c)2006 Analog Devices, Inc. All rights reserved. Trademarks and registered trademarks are the property of their respective owners. C04309-0-9/06(A)
Rev. A | Page 16 of 16


▲Up To Search▲   

 
Price & Availability of ADG3242BCZ-SF3

All Rights Reserved © IC-ON-LINE 2003 - 2022  

[Add Bookmark] [Contact Us] [Link exchange] [Privacy policy]
Mirror Sites :  [www.datasheet.hk]   [www.maxim4u.com]  [www.ic-on-line.cn] [www.ic-on-line.com] [www.ic-on-line.net] [www.alldatasheet.com.cn] [www.gdcy.com]  [www.gdcy.net]


 . . . . .
  We use cookies to deliver the best possible web experience and assist with our advertising efforts. By continuing to use this site, you consent to the use of cookies. For more information on cookies, please take a look at our Privacy Policy. X