View 61-136-REGHB7C-B01-ET_4203069.PDF datasheet online --- IC-ON-LINE

Datasheet File OCR Text:

EVERLIGHT ELECTRONICS CO.,LTD.
Technical Data Sheet (Preliminary) Luminosity Full Color LED
61-136/REGHB7C-B01/ET
Features
Super-luminosity chip LED. White SMT package. Built in Red, Green, and Blue chips. Lead frame package with individual 6 pins. Wide viewing angle. Soldering methods: IR reflow soldering. Pb-free. The product itself will remain within RoHS compliant version.
Descriptions
Due to the package design, 61-136 has wide viewing angle , low power consumption and adjusting each color is possible thanks to serial connection by 6 terminal connection (Individual driving by each terminal) in case of using several number of LED. And makes it ideal for light pipe application.
Applications
Amusement equipment. Information boards. Flashlight for digital camera of cellular phone.
Device Selection Guide
Chip Type RE GH B7 Material AlGaInP InGaN InGaN Emitted Color Lens Color
Brilliant Red Brilliant Green Blue
Water Clear
Everlight Electronics Co., Ltd. Device No.:
http://www.everlight.com Prepared date: 18-Sep-2006
Rev. 1
Page: 1 of 13
Prepared by: Forrest
EVERLIGHT ELECTRONICS CO.,LTD.
61-136/REGHB7C-B01/ET Package Outline Dimensions
R+
-R
G-
+G
B+
-B
Polarity
Recommend solding pad design
Note: The tolerances unless mentioned is 0.1mm ,Unit = mm
Everlight Electronics Co., Ltd. Device No.:
http://www.everlight.com Prepared date: 18-Sep-2006
Rev. 1
Page: 2 of 13
Prepared by: Forrest
EVERLIGHT ELECTRONICS CO.,LTD.
61-136/REGHB7C-B01/ET
Absolute Maximum Ratings (Ta=25)
Parameter Reverse Voltage Symbol VR RE Forward Current IF GH B7 RE Peak Forward Current (Duty 1/10 @ 1KHZ) IFP GH B7 RE Power Dissipation Pd GH B7 RE Thermal resistance (Junction-Air) RthJ-A GH B7 RE Thermal resistance (Junction-Lead) RthJ-L GH B7 Electrostatic Discharge(HBM) Operating Temperature Storage Temperature Soldering Temperature ESD Topr Tstg Tsol Rating 5 30 30 30 120 110 110 80 110 110 230 240 240 150 160 160 150 -40 ~ +85 -40~ +90 V /W /W mW mA
mA
Unit V
Reflow Soldering : 260 for 10 sec. Hand Soldering : 350 for 3 sec.
Everlight Electronics Co., Ltd. Device No.:
http://www.everlight.com Prepared date: 18-Sep-2006
Rev. 1
Page: 3 of 13
Prepared by: Forrest
EVERLIGHT ELECTRONICS CO.,LTD.
61-136/REGHB7C-B01/ET
Electro-Optical Characteristics (Ta=25)
Parameter Symbol RE Luminous Intensity Iv GH B7 RE Luminous Flux V GH B7 Viewing Angle 21/2 RE Peak Wavelength p GH B7 RE Dominant Wavelength d GH B7 RE Spectrum Radiation Bandwidth GH B7 RE
Forward Voltage
Min. 500 700 110 ----------------------------619.5 519.5 450.0 ------------1.8 3.0 3.0 -------------
Typ. ------------1.75 2.87 0.58 120 632 518 468 ------------20 35 35 -------------------------
Max. 700 1300 210 ----------------------------631.5 530.5 460.5 ------------2.2 3.4 3.4 10 50 50
Unit
Condition IF=20mA
mcd
IF=20mA IF=20mA
lm
IF=20mA
deg
IF=20mA
nm
IF=20mA
nm
IF=20mA
nm
IF=20mA
VF
GH B7 RE
V
IF=20mA
Reverse Current
IR
GH B7
A
VR=5V
Notes:
1. Tolerance of Luminous Intensity 10%
2.
Tolerance of Dominant Wavelength 1 nm
3. Tolerance of Forward Voltage 0.1V
Everlight Electronics Co., Ltd. Device No.:
http://www.everlight.com Prepared date: 18-Sep-2006
Rev. 1
Page: 4 of 13
Prepared by: Forrest
EVERLIGHT ELECTRONICS CO.,LTD.
61-136/REGHB7C-B01/ET
Bin Range Of Luminous Intensity Symbol
RE
Bin Code R1 R2 G0
Min.
Max.
Unit
Condition
500 600 700 1000 110 160
600 700 1000 1300 160 210
mcd
IF =20mA
Iv
GH
G1
B7
B1 B2
Bin Range Of Dominant Wavelength Symbol Bin Code
RE
Min.
Max.
Unit
Condition
R1 R2 G0 G1 B0 B1
d
GH
B7
619.5 625.5 519.5 525.5 450.0 455.0
625.5 631.5 525.5 530.5 455.0 460.5
nm
IF =20mA
Notes:
1.Tolerance of Luminous Intensity 10% 2.Tolerance of Dominant Wavelength 1 nm
Everlight Electronics Co., Ltd. Device No.:
http://www.everlight.com Prepared date: 18-Sep-2006
Rev. 1
Page: 5 of 13
Prepared by: Forrest
EVERLIGHT ELECTRONICS CO.,LTD.
61-136/REGHB7C-B01/ET
Bin Range of Forward Voltage Symbol RE Bin Code VR0 VR1
VG0
Min.
Max.
Unit
Condition
1.80 2.00 3.00 3.20 3.40 3.00 3.20
2.00 2.20 3.20 3.40 3.60 3.20 3.40
V
IF =20mA
VF
GH
VG1 VG2
VB1 B7 Notes:
1. Tolerance of Forward Voltage 0.1V
VB2
Everlight Electronics Co., Ltd. Device No.:
http://www.everlight.com Prepared date: 18-Sep-2006
Rev. 1
Page: 6 of 13
Prepared by: Forrest
EVERLIGHT ELECTRONICS CO.,LTD.
61-136/REGHB7C-B01/ET
Typical Electro-Optical Characteristics Curves Typical curve of spectral distribution: V()=Standard eye response curve
100%
Relative Intensity (%)
B7
GH
V()
RE
50%
0% 400 450 500 550 600 650 700
Peak Wavelength (nm)
Diagram characteristics of radiation:
20 30 40 50 View Angle 60 70 80 90
o o o o o o o o
10
o
0
o
1.0 Relative Intensity 0.8 0.6 0.4 0.2 0
1.0
0.8
0.6
0.4
0.2
0
20
o
Relative Intensity
60 40 View Angle
o
o
80
o
Everlight Electronics Co., Ltd. Device No.:
http://www.everlight.com Prepared date: 18-Sep-2006
Rev. 1
Page: 7 of 13
Prepared by: Forrest
EVERLIGHT ELECTRONICS CO.,LTD.
61-136/REGHB7C-B01/ET
Forward Current vs. Forward Voltage
100
Ta=25
Forward Current I F (mA)
RE
GH
B7
10
1 1.7 2 2.3 2.6 2.9 3.2 3.5 3.8
Forward Voltage V F (V)
Forward Current v.s. Ambient Temp.
50 40
IF (mA)
30 20 10 0 0 20 40 60 80 100
T (degree C)
Everlight Electronics Co., Ltd. Device No.:
http://www.everlight.com Prepared date: 18-Sep-2006
Rev. 1
Page: 8 of 13
Prepared by: Forrest
EVERLIGHT ELECTRONICS CO.,LTD.
61-136/REGHB7C-B01/ET
Label explanation
CAT: Luminous Intensity Rank HUE: Dom. Wavelength Rank REF: Forward Voltage Rank
Reel Dimensions
Note: The tolerances unless mentioned is 0.1mm ,Unit = mm
Everlight Electronics Co., Ltd. Device No.:
http://www.everlight.com Prepared date: 18-Sep-2006
Rev. 1
Page: 9 of 13
Prepared by: Forrest
EVERLIGHT ELECTRONICS CO.,LTD.
61-136/REGHB7C-B01/ET
Carrier Tape Dimensions;Loaded quantity per reel 800 PCS/reel
B
G -
R
B
G
R
Polarity
Note: The tolerances unless mentioned is 0.1mm ,Unit = mm
Moisture Resistant Packaging
Label
Aluminum moisture-proof bag
Desiccant
Label
Everlight Electronics Co., Ltd. Device No.:
http://www.everlight.com Prepared date: 18-Sep-2006
Rev. 1
Page: 10 of 13
Prepared by: Forrest
EVERLIGHT ELECTRONICS CO.,LTD.
61-136/REGHB7C-B01/ET
Reliability Test Items And Conditions
The reliability of products shall be satisfied with items listed below. Confidence level90% LTPD10%
No. 1
Items Reflow Soldering
Test Condition Temp. : 2605 Min. 5sec. H : +100 15min 5 min L : -40 15min H : +100 5min 10 sec L : -10 5min Temp. : 100 Temp. : -40 IF = 20 mA 85/ 85%RH
Test Sample Hours/Cycles Size 6 Min. 300 Cycles 22 PCS.
Ac/Re 0/1
2
Temperature Cycle
22 PCS.
0/1
3
Thermal Shock High Temperature Storage Low Temperature Storage DC Operating Life
300 Cycles 1000 Hrs. 1000 Hrs. 1000 Hrs. 1000 Hrs.
22 PCS.
0/1
4 5 6 7
22 PCS. 22 PCS. 22 PCS. 22 PCS.
0/1 0/1 0/1 0/1
High Temperature / High Humidity * For each die
Everlight Electronics Co., Ltd. Device No.:
http://www.everlight.com Prepared date: 18-Sep-2006
Rev. 1
Page: 11 of 13
Prepared by: Forrest
EVERLIGHT ELECTRONICS CO.,LTD.
61-136/REGHB7C-B01/ET
Precautions For Use
1. Over-current-proof Customer must apply resistors for protection, otherwise slight voltage shift will cause big current change ( Burn out will happen ). 2. Storage 2.1 Do not open moisture proof bag before the products are ready to use.
2.2 Before opening the package: The LEDs should be kept at 30 or less and 90%RH or less. 2.3 After opening the package: The LED's floor life is 1 year under 30 deg C or less and 60% RH or less. If unused LEDs remain, it should be stored in moisture proof packages. 2.4 If the moisture absorbent material (silica gel) has faded away or the LEDs have exceeded the storage time, baking treatment should be performed using the following conditions. Baking treatment : 605 for 24 hours. 3. Soldering Condition 3.1 Pb-free solder temperature profile
1~5 C / Sec. 260C. Max. 10 Sec. Max. 1~5 C / Sec. Pre-heating 180~200C
60 Sec. Max. Above 220C
120 Sec. Max.
3.2 Reflow soldering should not be done more than two times. 3.3 When soldering, do not put stress on the LEDs during heating. 3.4 After soldering, do not warp the circuit board. 4.Soldering Iron Each terminal is to go to the tip of soldering iron temperature less than 350 for 3 seconds within once in less than the soldering iron capacity 25W. Leave two seconds and more intervals, and do soldering of each terminal. Be careful because the damage of the product is often started at the time of the hand solder.
Everlight Electronics Co., Ltd. Device No.:
http://www.everlight.com Prepared date: 18-Sep-2006
Rev. 1
Page: 12 of 13
Prepared by: Forrest
EVERLIGHT ELECTRONICS CO.,LTD.
61-136/REGHB7C-B01/ET
5.Repairing Repair should not be done after the LEDs have been soldered. When repairing is unavoidable, a double-head soldering iron should be used (as below figure). It should be confirmed beforehand whether the characteristics of the LEDs will or will not be damaged by repairing.
EVERLIGHT ELECTRONICS CO., LTD. Office: No 25, Lane 76, Sec 3, Chung Yang Rd, Tucheng, Taipei 236, Taiwan, R.O.C
Tel: 886-2-2267-2000, 2267-9936 Fax: 886-2267-6244, 2267-6189, 2267-6306 http://www.everlight.com
Everlight Electronics Co., Ltd. Device No.:
http://www.everlight.com Prepared date: 18-Sep-2006
Rev. 1
Page: 13 of 13
Prepared by: Forrest

▲Up To Search▲

Price & Availability of 61-136-REGHB7C-B01-ET

	To Download 61-136-REGHB7C-B01-ET Datasheet File
If you can't view the Datasheet, Please click here to try to view without PDF Reader .