 |
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
| Datasheet File OCR Text: |
| STE250NS10 N-channel 100V - 0.0045 - 220A - ISOTOP STripFETTM Power MOSFET General features Type STE250NS10 VDSS 100V RDS(on) <0.0055 ID 220A Standard threshold drive 100% avalanche tested Description This Power MOSFET is the latest development of STMicroelectronics unique "Single Feature SizeTM" strip-based process. The resulting transistor shows extremely high packing density for low on-resistance, rugged avalanche characteristics and less critical alignment steps therefore a remarkable manufacturing reproducibility. ISOTOP Internal schematic diagram Applications Switching application Order codes Part number STE250NS10 Marking E250NS10 Package ISOTOP Packaging Tube October 2006 Rev 2 1/12 www.st.com 12 Contents STE250NS10 Contents 1 2 Electrical ratings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 Electrical characteristics . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 2.1 Electrical characteristics (curves) ............................ 6 3 4 5 Test circuit ................................................ 8 Package mechanical data . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9 Revision history . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11 2/12 STE250NS10 Electrical ratings 1 Electrical ratings Table 1. Symbol VDS VGS ID ID IDM (1) Absolute maximum ratings Parameter Drain-source voltage (vgs = 0) Gate- source voltage Drain current (continuos) at TC = 25C Drain current (continuos) at TC = 100C Drain current (pulsed) Total dissipation at TC = 25C Derating factor Value 100 20 220 156 880 500 4 3.5 2500 150 -55 to 150 Unit V V A A A W W/C V/ns V C PTOT dv/dt(2) VISO TJ Tstg Peak diode recovery voltage slope Insulation winthstand voltage (DC) Operating junction temperature Storage temperature 1. Pulse width limited by safe operating area 2. ISD 220A, di/dt 200A/s, VDD V(BR)DSS, Tj TJMAX Table 2. Rthj-a Thermal data 0.25 50 CW CW Thermal resistance junction-ambient Max Rthj-case Thermal resistance junction-case Max Table 3. Symbol IAS EAS Avalanche characteristics Parameter Avalanche current, repetitive or not-repetitive (pulse width limited by Tj Max) Single pulse avalanche energy (starting Tj=25C, Id=Iar, Vdd=64V) Value 220 800 Unit A mJ 3/12 Electrical characteristics STE250NS10 2 Electrical characteristics (TCASE=25C unless otherwise specified) Table 4. Symbol V(BR)DSS On/off states Parameter Drain-source Breakdown voltage Zero gate voltage Drain current (VGS = 0) Gate-body leakage current (VDS = 0) Gate threshold voltage Static drain-source on resistance Test conditions ID = 1 mA, VGS = 0 VDS = Max rating VDS= Max rating, TC=125C VGS = 20V VDS = VGS, ID = 250A VGS = 10V, ID = 125A 2 3 Min. 100 50 500 400 4 Typ. Max. Unit V A A nA V IDSS IGSS VGS(th) RDS(on) 0.0045 0.0055 Table 5. Symbol gfs Ciss Coss Crss Qg Qgs Qgd Dynamic Parameter Forward transconductance Input capacitance Output capacitance Reverse transfer capacitance Total gate charge Gate-source charge Gate-drain charge VDD = 50V, ID = 22A, VGS = 10V VDS = 25V, f = 1 MHz, VGS = 0 Test conditions VDS = 20V, ID=70A Min. Typ. 60 31 4.3 1.2 900 160 330 Max. Unit S nF nF nF nC nC nC Table 6. Symbol td(on) tr Switching times Parameter Turn-on delay time Rise time Test conditions VDD=50 V, ID=125A, RG=4.7, VGS= 10V (see Figure 13) VDD=50 V, ID=125A, RG=4.7, VGS= 10V (see Figure 13) VDD=80V, ID=220A, RG=4.7, VGS=10V (see Figure 15) Min. Typ. 110 380 Max. Unit ns ns ns ns td(off) tf tr(Voff) tf tc Turn-off-delay time Fall time Off-voltage rise time fall time cross-over time 1100 300 950 330 600 ns ns ns 4/12 STE250NS10 Table 7. Symbol ISD ISDM VSD (1) (2) Electrical characteristics Source drain diode Parameter Source-drain current Source-drain current (pulsed) Forward on voltage Reverse recovery time Reverse recovery charge Reverse recovery current ISD = 220A, VGS = 0 ISD = 220A, VDD = 30V di/dt = 100A/s, Tj = 150C (see Figure 15) 200 1.35 13.5 Test conditions Min Typ. Max 220 880 1.5 Unit A A V ns C A trr Qrr IRRM 1. Pulse width limited by safe operating area. 2. Pulsed: Pulse duration = 300 s, duty cycle 1.5 % 5/12 Electrical characteristics STE250NS10 2.1 Figure 1. Electrical characteristics (curves) Safe operating area Figure 2. Thermal impedance Figure 3. Output characterisics Figure 4. Transfer characteristics Figure 5. Transconductance Figure 6. Static drain-source on resistance 6/12 STE250NS10 Figure 7. Gate charge vs gate-source voltage Figure 8. Electrical characteristics Capacitance variations Figure 9. Normalized gate threshold voltage vs temperature Figure 10. Normalized on resistance vs temperature Figure 11. Source-drain diode forward characteristics Figure 12. Normalized breakdown voltage vs temperature 7/12 Test circuit STE250NS10 3 Test circuit Figure 14. Gate charge test circuit Figure 13. Switching times test circuit for resistive load Figure 15. Test circuit for inductive load Figure 16. Unclamped Inductive load test switching and diode recovery times circuit Figure 17. Unclamped inductive waveform Figure 18. Switching time waveform 8/12 STE250NS10 Package mechanical data 4 Package mechanical data In order to meet environmental requirements, ST offers these devices in ECOPACK(R) packages. These packages have a Lead-free second level interconnect . The category of second level interconnect is marked on the package and on the inner box label, in compliance with JEDEC Standard JESD97. The maximum ratings related to soldering conditions are also marked on the inner box label. ECOPACK is an ST trademark. ECOPACK specifications are available at : www.st.com 9/12 Package mechanical data STE250NS10 ISOTOP MECHANICAL DATA DIM. MIN. A B C D E F G H J K L M N O 11.8 8.9 1.95 0.75 12.6 25.15 31.5 4 4.1 14.9 30.1 37.8 4 7.8 8.2 4.3 15.1 30.3 38.2 mm TYP. MAX. 12.2 9.1 2.05 0.85 12.8 25.5 31.7 MIN. 0.466 0.350 0.076 0.029 0.496 0.990 1.240 0.157 0.161 0.586 1.185 1.488 0.157 0.307 0.322 0.169 0.594 1.193 1.503 inch TYP. MAX. 0.480 0.358 0.080 0.033 0.503 1.003 1.248 G O B A N D E F J K L M H C 10/12 STE250NS10 Revision history 5 Revision history Table 8. Date 21-Jun-2004 04-Oct-2006 Revision history Revision 1 2 Complete version New template, no content change Changes 11/12 STE250NS10 Please Read Carefully: Information in this document is provided solely in connection with ST products. STMicroelectronics NV and its subsidiaries ("ST") reserve the right to make changes, corrections, modifications or improvements, to this document, and the products and services described herein at any time, without notice. All ST products are sold pursuant to ST's terms and conditions of sale. Purchasers are solely responsible for the choice, selection and use of the ST products and services described herein, and ST assumes no liability whatsoever relating to the choice, selection or use of the ST products and services described herein. No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted under this document. If any part of this document refers to any third party products or services it shall not be deemed a license grant by ST for the use of such third party products or services, or any intellectual property contained therein or considered as a warranty covering the use in any manner whatsoever of such third party products or services or any intellectual property contained therein. UNLESS OTHERWISE SET FORTH IN ST'S TERMS AND CONDITIONS OF SALE ST DISCLAIMS ANY EXPRESS OR IMPLIED WARRANTY WITH RESPECT TO THE USE AND/OR SALE OF ST PRODUCTS INCLUDING WITHOUT LIMITATION IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE (AND THEIR EQUIVALENTS UNDER THE LAWS OF ANY JURISDICTION), OR INFRINGEMENT OF ANY PATENT, COPYRIGHT OR OTHER INTELLECTUAL PROPERTY RIGHT. UNLESS EXPRESSLY APPROVED IN WRITING BY AN AUTHORIZED ST REPRESENTATIVE, ST PRODUCTS ARE NOT RECOMMENDED, AUTHORIZED OR WARRANTED FOR USE IN MILITARY, AIR CRAFT, SPACE, LIFE SAVING, OR LIFE SUSTAINING APPLICATIONS, NOR IN PRODUCTS OR SYSTEMS WHERE FAILURE OR MALFUNCTION MAY RESULT IN PERSONAL INJURY, DEATH, OR SEVERE PROPERTY OR ENVIRONMENTAL DAMAGE. ST PRODUCTS WHICH ARE NOT SPECIFIED AS "AUTOMOTIVE GRADE" MAY ONLY BE USED IN AUTOMOTIVE APPLICATIONS AT USER'S OWN RISK. Resale of ST products with provisions different from the statements and/or technical features set forth in this document shall immediately void any warranty granted by ST for the ST product or service described herein and shall not create or extend in any manner whatsoever, any liability of ST. ST and the ST logo are trademarks or registered trademarks of ST in various countries. Information in this document supersedes and replaces all information previously supplied. The ST logo is a registered trademark of STMicroelectronics. All other names are the property of their respective owners. (c) 2006 STMicroelectronics - All rights reserved STMicroelectronics group of companies Australia - Belgium - Brazil - Canada - China - Czech Republic - Finland - France - Germany - Hong Kong - India - Israel - Italy - Japan Malaysia - Malta - Morocco - Singapore - Spain - Sweden - Switzerland - United Kingdom - United States of America www.st.com 12/12 |
Price & Availability of STE250NS1006
 |
|
|
|
|
All Rights Reserved © IC-ON-LINE 2003 - 2022 |
| [Add Bookmark] [Contact Us] [Link exchange] [Privacy policy] |
|
Mirror Sites : [www.datasheet.hk]
[www.maxim4u.com] [www.ic-on-line.cn]
[www.ic-on-line.com] [www.ic-on-line.net]
[www.alldatasheet.com.cn]
[www.gdcy.com]
[www.gdcy.net] |