View 67-21B-UPGC-A003-3-TR8_4171878.PDF datasheet online --- IC-ON-LINE

Datasheet File OCR Text:

EVERLIGHTELECTRONICS CO.,LTD. Technical Data Sheet TOP View LEDs With Lens
67-21BUPGC/A003-3/TR8
Features
P-LCC-2 package. High flux output. High current capability. White package. Optical indicator. Colorless clear window. Ideal for backlight and light pipe application. Inter reflector. Suitable for automatic placement equipment. Suitable for reflow and wave solder processes. Available on tape and reel (12mm Tape). Pb-free. The product itself will remain within RoHS compliant version. The 67-21B series is available in soft orange, red and yellow. Due to the package design, the LED has wide viewing angle and optimized light coupling by inter reflector. This feature makes the 67-21B series LED ideal for light pipe application. The low current requirement makes this device ideal for portable equipment or any other application where power is at a premium.
Descriptions
Applications
Automotive: dashboard, indicator and switch.
Indicator and backlight for audio and video equipment. Indicator and backlight in office and family equipment.
Flat backlight for LCD's, switches and symbols.
Light pipe application. General use.
Device Selection Guide
Chip Material AlGaInP Emitted Color Pale Green Lens Color Water Clear
Everlight Electronics Co., Ltd. Device No. :DSE-67B-047
http://www.everlight.com Prepared date:23-Apr-2006
Rev. 2
Page: 1 of 11
Prepared by : Ray Yuan
EVERLIGHTELECTRONICS CO.,LTD.
67-21BUPGC/A003-3/TR8
Package Dimensions
C L
2.2O 0.1 2.8O 0.2
+
Polarity
-
C L
3.250.2
3.0
Recommend soldering pad design
Note: The tolerances unless mentioned is O 0.1mm;Unit = mm
Everlight Electronics Co., Ltd. Device No. :DSE-67B-047
http://www.everlight.com Prepared date:23-Apr-2006
Rev. 2
Page: 2 of 11
Prepared by : Ray Yuan
EVERLIGHTELECTRONICS CO.,LTD.
67-21BUPGC/A003-3/TR8
Absolute Maximum Ratings (Ta=25J
Parameter Reverse Voltage Forward Current Peak Forward Current(Duty 1/10 @ 1KHz) Power Dissipation Electrostatic Discharge (HBM) Operating Temperature Storage Temperature Soldering Temperature
)
Symbol VR IF IFP Pd ESD Topr Tstg Tsol Rating 12 30 80 100 2000 -40 ~ +100 -40~ +110 Reflow Soldering : 260 J Hand Soldering : 350 J Typ. ----60 560 ----20 --------Max. 140 --------561 ----2.40 10 Unit mcd deg nm nm nm V A J for 10 sec. for 3 sec. Condition IF=30mA IF=30mA IF=30mA IF=30mA IF=30mA IF=30mA VR=12V J Unit V mA mA mW V
Electronic Optical Characteristics (Ta=25J
Parameter Luminous Intensity Viewing Angle Peak Wavelength Dominant Wavelength Spectrum Radiation Bandwidth
Forward Voltage Reverse Current
):
Symbol Iv 21/2 p d VF IR
Min. 71 --------557 ----1.80 -----
Notes:
1.Tolerance of Luminous Intensity 11% 2.Tolerance of Dominant Wavelength 1nm 3.Tolerance of Forward Voltage 0.1V
Everlight Electronics Co., Ltd. Device No. :DSE-67B-047
http://www.everlight.com Prepared date:23-Apr-2006
Rev. 2
Page: 3 of 11
Prepared by : Ray Yuan
EVERLIGHTELECTRONICS CO.,LTD.
67-21BUPGC/A003-3/TR8
Bin Range Of Dominant Wavelength
Bin Code A B Min. 557 559 Max. 559 561 Unit nm Condition IF=30mA
Bin Range Of Luminous Intensity
Bin Q1 Q2 R1 Bin 2B-1 3A 3B 4A-1 Notes: 1.Tolerance of Luminous Intensity 11% 2.Tolerance of Dominant Wavelength 1nm 3.Tolerance of Forward Voltage 0.1V Min 71 90 112 Min 1.80 1.90 2.05 2.20 Max 90 112 140 Max 1.90 2.05 2.20 2.40 Unit Condition mcd IF=30mA Unit Condition
Bin Range Of Forward Voltage
V
IF=30mA
Everlight Electronics Co., Ltd. Device No. :DSE-67B-047
http://www.everlight.com Prepared date:23-Apr-2006
Rev. 2
Page: 4 of 11
Prepared by : Ray Yuan
EVERLIGHTELECTRONICS CO.,LTD.
67-21BUPGC/A003-3/TR8
Typical Electro-Optical Characteristics Curves Typical curve of spectral distribution: V()=Standard eye response curve
100
Relative Intensity (%)
V(f )
50
UPG
0 400
450
500
550
600
650
700
Wp (nm)
Diagram characteristics of radiation:
20 30 40 50
o o o o
10
o
0
o
1.0
60 70 80 90
o o o
o
0.6 0.4 0.2 0
1.0
0.8
0.6
0.4
0.2
0
20
o
Relative Intensity
60 40 View Angle
o
o
80
o
Everlight Electronics Co., Ltd. Device No. :DSE-67B-047
http://www.everlight.com Prepared date:23-Apr-2006
Rev. 2
Page: 5 of 11
Prepared by : Ray Yuan
Relative Intensity
0.8
View Angle
EVERLIGHTELECTRONICS CO.,LTD.
67-21BUPGC/A003-3/TR8
Forward Current vs. Forward Voltage Ta=25J
100
Forward Curren t I F (mA)
10
1
0.1 1.5 1.6 1.7 1.8 1.9 2 2.1 2.2 2.3
Forward Voltage VF (V)
Forward current v.s. Ambient Temp.
40 35 30 25 20 15 10 5 0 0 20 40 60 80 100 T (degreeC)
Everlight Electronics Co., Ltd. Device No. :DSE-67B-047
IF(mA)
http://www.everlight.com Prepared date:23-Apr-2006
Rev. 2
Page: 6 of 11
Prepared by : Ray Yuan
EVERLIGHTELECTRONICS CO.,LTD.
67-21BUPGC/A003-3/TR8
Label explanation
CAT: Luminous Intensity Rank HUE: Dom. Wavelength Rank REF: Forward Voltage Rank
Reel Dimensions
Note: The tolerances unless mentioned is 0.1mm ,Unit = mm
Everlight Electronics Co., Ltd. Device No. :DSE-67B-047
http://www.everlight.com Prepared date:23-Apr-2006
Rev. 2
Page: 7 of 11
Prepared by : Ray Yuan
EVERLIGHTELECTRONICS CO.,LTD.
67-21BUPGC/A003-3/TR8
Carrier Tape Dimensions: Loaded quantity 2000 PCS per reel.
Note: The tolerances unless mentioned is 0.1mm Unit = mm
Moisture Resistant Packaging
+
Label
Everlight Electronics Co., Ltd. Device No. :DSE-67B-047
Polarity
Aluminum moisture-proof bag Desiccant Label
http://www.everlight.com Prepared date:23-Apr-2006 Rev. 2 Page: 8 of 11 Prepared by : Ray Yuan
EVERLIGHTELECTRONICS CO.,LTD.
67-21BUPGC/A003-3/TR8
Reliability Test Items And Conditions The reliability of products shall be satisfied with items listed below. Confidence levelG 90% LTPDG 10%
No.
Items
Test Condition Temp. : 260 5 J Min. 5sec. H : +100J 15min 5 min L : -40J 15min H : +100J 5min 10 sec L : -10J 5min Temp. : 100J J
Test Hours/Cycles
Sample Size 22 PCS.
Ac/Re
1
Reflow Soldering
6 Min.
0/1
2
Temperature Cycle
300 Cycles
22 PCS.
0/1
3
Thermal Shock High Temperature Storage Low Temperature Storage DC Operating Life High Temperature / High Humidity
300 Cycles 1000 Hrs.
22 PCS.
0/1
4
22 PCS.
0/1
5
Temp. : -40J
1000 Hrs.
22 PCS.
0/1
6
IF = 20 mA / 25J
1000 Hrs.
22 PCS.
0/1
7
85J / 85%RH
1000 Hrs.
22 PCS.
0/1
Everlight Electronics Co., Ltd. Device No. :DSE-67B-047
http://www.everlight.com Prepared date:23-Apr-2006
Rev. 2
Page: 9 of 11
Prepared by : Ray Yuan
EVERLIGHTELECTRONICS CO.,LTD.
67-21BUPGC/A003-3/TR8
Precautions For Use
1. Over-current-proof Customer must apply resistors for protection, otherwise slight voltage shift will cause big current change ( Burn out will happen ). 2. Storage 2.1 Do not open moisture proof bag before the products are ready to use. 2.2 Before opening the package: The LEDs should be kept at 30J or less and 90%RH or less. or less and 60% RH or less. 2.3 After opening the package: The LED's floor life is 1 year under 30J
If unused LEDs remain, it should be stored in moisture proof packages. 2.4 If the moisture absorbent material (silica gel) has faded away or the LEDs have exceeded the storage time, baking treatment should be performed using the following conditions. Baking treatment : 605J 3. Soldering Condition 3.1 Pb-free solder temperature profile
1~5 C / Sec. 260 C Max 10 Sec. Max. 1~5 C / Sec. Pre-heating 180~200C
for 24 hours.
60 Sec. Max. Above 220C
120 Sec. Max.
3.2 Reflow soldering should not be done more than two times. 3.3 When soldering, do not put stress on the LEDs during heating. 3.4 After soldering, do not warp the circuit board. 4.Soldering Iron Each terminal is to go to the tip of soldering iron temperature less than 350J for 3 seconds within once in less than the soldering iron capacity 25W. Leave two seconds and more intervals, and do soldering of each terminal. Be careful because the damage of the product is often started at the time of the hand solder.
Everlight Electronics Co., Ltd. Device No. :DSE-67B-047
http://www.everlight.com Prepared date:23-Apr-2006
Rev. 2
Page: 10 of 11
Prepared by : Ray Yuan
EVERLIGHTELECTRONICS CO.,LTD.
67-21BUPGC/A003-3/TR8
5.Repairing Repair should not be done after the LEDs have been soldered. When repairing is unavoidable, a double-head soldering iron should be used (as below figure). It should be confirmed beforehand whether the characteristics of the LEDs will or will not be damaged by repairing.
EVERLIGHT ELECTRONICS CO., LTD. Office: No 25, Lane 76, Sec 3, Chung Yang Rd, Tucheng, Taipei 236, Taiwan, R.O.C
Tel: 886-2-2267-2000, 2267-9936 Fax: 886-2267-6244, 2267-6189, 2267-6306 http://www.everlight.com
Everlight Electronics Co., Ltd. Device No. :DSE-67B-047
http://www.everlight.com Prepared date:23-Apr-2006
Rev. 2
Page: 11 of 11
Prepared by : Ray Yuan

▲Up To Search▲

Price & Availability of 67-21B-UPGC-A003-3-TR8

	To Download 67-21B-UPGC-A003-3-TR8 Datasheet File
If you can't view the Datasheet, Please click here to try to view without PDF Reader .