View SVC704_4160057.PDF datasheet online --- IC-ON-LINE

Datasheet File OCR Text:

Ordering number : EN8997
SVC704
SANYO Semiconductors
DATA SHEET
SVC704
Features
* * *
Silicon Diffused Junction Type Varactor Diode
Varactor Diode for AFC, VCO
High capacitance ratio (VR=1.0 to 7.0V). Small-sized package. Low series resistance.
Specifications
Absolute Maximum Ratings at Ta=25C
Parameter Reverse Voltage Junction Temperature Storage Temperature Symbol VR Tj Tstg Conditions Ratings 16 150 --55 to +150 Unit V C C
Electrical Characteristics at Ta=25C
Parameter Breakdown Voltage Reverse Current Interterminal Capacitance Series Resistance Capacitance Ratio Symbol V(BR)R IR C1.0V C7.0V rs CR IR=10A VR=10V VR=1.0V, f=1MHz VR=7.0V, f=1MHz VR=1.0V, f=470MHz C1.0V / C7.0V Conditions Ratings min 16 50 26.0 3.4 6.0 30.0 4.6 0.8 typ max Unit V nA pF pF
Marking : V5
Any and all SANYO Semiconductor products described or contained herein do not have specifications that can handle applications that require extremely high levels of reliability, such as life-support systems, aircraft's control systems, or other applications whose failure can be reasonably expected to result in serious physical and/or material damage. Consult with your SANYO Semiconductor representative nearest you before usingany SANYO Semiconductor products described or contained herein in such applications. SANYO Semiconductor assumes no responsibility for equipment failures that result from using products at values that exceed, even momentarily, rated values (such as maximum ratings, operating condition ranges, or other parameters) listed in products specifications of any and all SANYO Semiconductor products described or contained herein.
TOKYO OFFICE Tokyo Bldg., 1-10, 1 Chome, Ueno, Taito-ku, TOKYO, 110-8534 JAPAN
82306 / 61506VC MS IM TB-00002374 No.8997-1/3
SVC704
Package Dimensions
unit : mm 7019A-001
3
2.0 0.25 0.15
Electrical Connection
3
2.1 1.6 0 to 0.02
1 : Anode 2 : No Contact 3 : Cathode
1 2
Top view
1
0.25 0.65
2
0.3
0.85
0.07
1 : Anode 2 : No Contact 3 : Cathode SANYO : MCPH3
1000 7 5
C, Q -- VR
VRF=20mVrms
1000 7 5
3 2
3 2
Interterminal Capacitance, C -- pF
100 7 5
al Qu
5
3 2
3 2
Inte
10 7 5
rter
min
al C
apa
cita
nce
10
,C
f=1
MH
7
z
5
3 2
3 2
1.0 0 1 2 3 4 5 6 7 8 9 10
1.0
Reverse Voltage, VR -- V
IT10665
No.8997-2/3
Quality Factor, Q
ity
F
Q or, act
f=
0 47
MH
z
100 7
SVC704
C -- Ta
1.20 1.18
VRF=20mVrms f=1MHz
1.16 1.14 1.12 1.10 1.08
=1 VR
.0V
Capacitance Ratio
1.06 1.04 1.02 1.00 0.98 0.96 0.94 0.92 0.90 --50
V 2.5 4.0V V 7.0
4.0V
V V R=7.0
2.5V
1.0 V
--25
0
25
Ambient Temperature, Ta -- C
50
75
100
125
150 IT10666
Specifications of any and all SANYO Semiconductor products described or contained herein stipulate the performance, characteristics, and functions of the described products in the independent state, and are not guarantees of the performance, characteristics, and functions of the described products as mounted in the customer's products or equipment. To verify symptoms and states that cannot be evaluated in an independent device, the customer should always evaluate and test devices mounted in the customer's products or equipment. SANYO Semiconductor Co., Ltd. strives to supply high-quality high-reliability products. However, any and all semiconductor products fail with some probability. It is possible that these probabilistic failures could give rise to accidents or events that could endanger human lives, that could give rise to smoke or fire, or that could cause damage to other property. When designing equipment, adopt safety measures so that these kinds of accidents or events cannot occur. Such measures include but are not limited to protective circuits and error prevention circuits for safe design, redundant design, and structural design. In the event that any or all SANYO Semiconductor products (including technical data,services) described or contained herein are controlled under any of applicable local export control laws and regulations, such products must not be exported without obtaining the export license from the authorities concerned in accordance with the above law. No part of this publication may be reproduced or transmitted in any form or by any means, electronic or mechanical, including photocopying and recording, or any information storage or retrieval system, or otherwise, without the prior written permission of SANYO Semiconductor Co., Ltd. Any and all information described or contained herein are subject to change without notice due to product/technology improvement, etc. When designing equipment, refer to the "Delivery Specification" for the SANYO Semiconductor product that you intend to use. Information (including circuit diagrams and circuit parameters) herein is for example only; it is not guaranteed for volume production. SANYO Semiconductor believes information herein is accurate and reliable, but no guarantees are made or implied regarding its use or any infringements of intellectual property rights or other rights of third parties.
This catalog provides information as of June, 2006. Specifications and information herein are subject to change without notice.
PS No.8997-3/3

▲Up To Search▲

Price & Availability of SVC704

	To Download SVC704 Datasheet File
If you can't view the Datasheet, Please click here to try to view without PDF Reader .