 |
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
| Datasheet File OCR Text: |
| PMP 7 Rectifier Module Description The Power-One PMP 7 rectifier module provides a cost-effective power solution in the highest possible density. Built on the latest advances in the resonance switch mode approach (soft-switching), the PMP 7 is the next evolution in our small convection cooled rectifier series. Optimized for telecom applications, the module is designed to work in a multitude of different subrack/shelf configurations incorporating the Power-One PCU controller and various distribution options. Features * 208/240 VAC input * 24V, 48V, or 60V DC output * Input overvoltage disconnection * Thermal protection * Active load sharing * Hot-swappable * Up to 92% efficient * International standards compliance * Natural convection cooling PPS 7 3500 System Shown * Low weight www.power-one.com PMP 7 Rectifier Module Input Model Input Voltage Current (max.) Soft Start PMP 7.24 PMP 7.48 PMP 7.60 205-250V AC 10% single phase, (44-66Hz) (-15% for PMP7.60) 185-160V at reduced output power <3.55A <11A peak max. 5ms <4.35A <15.5A peak max. 5ms <4.35A <20A peak max. 5ms Insulation Mechanical Dimensions Weight Cooling 62 x 129 x 232mm (2.4 x 5.1 x 9.1in.) 1.65kg (3.6lbs.) Natural convection Reinforced insulation tested at: 4.25 kV DC primary-secondary, 2.12 kV DC primary-ground, 0.75 kV DC secondary ground IP20 In 19" subrack up to 5 modules Harmonics Surge Immunity Fuse Connection EMC EN 61000-3-2 Power Factor >0.99 at max. load EN 61000-4-5 T 6,3A IEC-320/C14 Enclosure Mounting Other Technical Data Safety EN 60950 UL 1950 and IEC60950 , Class 1 CSA C22-2 No. 950 Short circuit proof, automatic current limiting, selective shutdown of modules at excessive output voltage. Thermal protection reduces the output power at environmental temperatures above maximum level. Shut down at >75C with an automatic restart.* Input over-voltage disconnection at >275VAC with automatic reset at >260VAC. Green LED Power ON High output voltage/ shutdown Low voltage/ module failure EN 61000-6-2, EN 61000-6-3, FCC Part 15 Class B Output Model Output Voltage Power (max.) Current (max.) Efficiency (at 40-90% load)* PMP 7.24 22.5-28VDC 560W 20A >89.5% Vout +/- 1% PMP 7.48 45-56VDC 672W 12A >92% PMP 7.60 Protection 56-70.5VDC 635W 9A >92% Indications Red LED Tolerance Transient Response Load Sharing Ripple Psophometric Connection EMC +/- 5% at load variation 10-90% or 90-10%, recovery time 10ms <5% of nominal current <100mV p-p (BW. 30MHz) <2mV, according to CCITT norms DIN 41612F Radiated EMC EN 61000-6-2, EN 61000-6-4 Environment Audible Noise Operating Temperature* Storage Temperature Red LED <35dBA -25 to +55C up to 2000m -25 to +45C above 2000m -40 to +85C EN 61000-6-2, EN 61000-6-3, FCC Part 15, Class B Storage: Transport: Operation: ETS 300 019-2-1 ETS 300 019-2-2 ETS 300 019-2-3 *Average performance for a single module. Note: All specifications are subject to change without notification. 11V0005-028 PMP 7 V3.0 www.power-one.com |
Price & Availability of PMP724
 |
|
|
|
|
All Rights Reserved © IC-ON-LINE 2003 - 2022 |
| [Add Bookmark] [Contact Us] [Link exchange] [Privacy policy] |
|
Mirror Sites : [www.datasheet.hk]
[www.maxim4u.com] [www.ic-on-line.cn]
[www.ic-on-line.com] [www.ic-on-line.net]
[www.alldatasheet.com.cn]
[www.gdcy.com]
[www.gdcy.net] |