 |
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
| Datasheet File OCR Text: |
| DS21448DK 3.3V E1/T1/J1 Line Interface Design Kit Daughter Card www.maxim-ic.com GENERAL DESCRIPTION The DS21448DK is an easy-to-use evaluation board for the DS21448 quad E1/T1/J1 LIU. It is intended to be used as a daughter card with the DK101 motherboard or the DK2000 motherboard. A surfacemounted DS21448 and careful layout of the analog signal traces provide maximum signal integrity to demonstrate the transmit and receive capabilities of the DS21448. The DK101/DK2000 motherboard and Dallas' ChipView software give point-and-click access to configuration and status registers from a Windowsa-based PC. On-board LEDs indicate interrupt status and receive-carrier loss for all four ports. The evaluation board provides both RJ45 and BNC connectors for the line-side transmit and receive differential pairs on all four ports. Each DS21448DK is shipped with a free DK101 motherboard. For complex applications, the DK2000 high-performance demo kit motherboard can be purchased separately. Windows is a registered trademark of Microsoft Corp. FEATURES Demonstrates Key Functions of the DS21448 Quad LIU Includes Transformers, BNC, and RJ45 Network Connectors and Termination Passives Compatible with DK101 and DK2000 Demo Kit Motherboards DK101/DK2000 and ChipView Software Provide Point-and-Click Access to the DS21448 Register Set Memory-Mapped FPGA Provides Flexible Clock and Signal Routing LEDs for Receive-Carrier Loss and Interrupt Easy-to-Read Silk-Screen Labels Identify the Signals Associated with All Connectors, Jumpers, and LEDs ORDERING INFORMATION PART DS21448DK DESCRIPTION DS21448 Design Kit Daughter Card (with included DK101 Motherboard) DESIGN KIT CONTENTS DS21448DK Design Kit Daughter Card DK101 Demo Kit Motherboard CD-ROM ChipView Software DS21448DK Data Sheet DS21448 Data Sheet DK101 Data Sheet DS21448 Errata Sheet 1 of 17 REV: 121803 DS21448DK 3.3V E1/T1/J1 Line Interface Design Kit COMPONENT LIST DESIGNATION 1 C1, C2, C6, C10, C12, C22, C24 C3-C5, C7, C8, C11, C21, C23, C25, C26 C9 C13-C16 C17-C20 DS1-DS5 J1, J6-J13 J2 J3-J5 J14 J15, J16 R1-R16, R37-R41, R54-R57 R17, R20, R21, R25, R28-R36, R53 R18, R19, R22-R24, R26, R27 R42, R43 R44-R51 T1-T4 U1 QTY 1 7 DESCRIPTION 3.3V E1/T1/J1 line interface, 0C to +70C, 144-pin BGA 0.47mF, 25V, 10% ceramic capacitors (1206) SUPPLIER Dallas Semiconductor Digi-Key PART DS21448 PCC1891CT-ND 10 1 4 4 5 9 1 -- 1 2 25 0.1mF, 16V, 10% ceramic capacitors (0603) 10mF, 16V, 20% tantalum capacitor (B case) 0.1mF, 25V, 10% ceramic capacitors (1206) 1mF, 16V, 10% ceramic capacitors (1206) LED, red, SMD Connector BNC RA, 5-pin Connector, 10-pin, dual row, vertical 8-row by 2-column pin strip, 0.1" centers, 0.025" post RA RJ45, 8-pin, 4-port jack Socket, SMD, 50-pin, dual row, vertical 0W, 1/8W, 5% resistors (1206) Digi-Key Digi-Key Digi-Key Digi-Key Digi-Key Kruvand Digi-Key NA Molex Samtec Digi-Key 311-1088-1-ND PCS3106CT-ND PCC1883CT-ND PCC1882CT-ND P500CT-ND UCBJR220 S2012-05-ND Lab Stock 43223-8140 TFM-125-02-S-D-LC P0.0ETR-ND 14 10kW, 1/10W, 1% resistors (0805) Digi-Key P10.0KCCT-ND 7 2 8 4 1 51.1W, 1/10W, 1% resistors (0805) 1.0kW, 1/10W, 1% resistors (0805) 61.9W, 1/8W, 1% resistors (1206) XFMR, dual, 16-pin SMT Xilinx CPLD 72 macrocell, 100-pin TQFP, 3.3V Digi-Key Digi-Key Digi-Key Pulse Engineering Avnet P51.1CCT-ND P1.00KCCT-ND P61.9FCT-ND TX1099 XC95142XL-10TQ100C BASIC OPERATION Hardware Configuration Using the DK101 Processor Board * * * * Connect the daughter card to the DK101 processor board. Supply 3.3V to the banana-plug receptacles marked GND and VCC_3.3V. (The external 5V connector is unused. Additionally, the TIM 5V supply headers are unused.) All processor-board DIP switch settings should be in the ON position with the exception of the flashprogramming switch, which should be OFF. From the Programs menu, launch the host application named ChipView.EXE. Run the ChipView application. If the default installation options were used, click the Start button on the Windows toolbar and select Programs (R) ChipView (R) ChipView. Using the DK2000 Processor Board * * * Connect the daughter card to the DK2000 processor board. Connect J1 to the power supply that is delivered with the kit. Alternately, a PC power supply can be connected to connector J2. From the Programs menu, launch the host application named ChipView.EXE. Run the ChipView application. If the default installation options were used, click the Start button on the Windows toolbar and select Programs (R) ChipView (R) ChipView. 2 of 17 DS21448DK 3.3V E1/T1/J1 Line Interface Design Kit General * * * Upon power-up, the RCL LEDs are lit, and the INT LED is off. After power-up, the RCL LEDs extinguish upon external loopback. Due to the dual winding transformer, only the 120W line build-out (LBO) configuration setting is needed to cover both 75W E1 and 120W E1. Miscellaneous * * Clock frequencies are provided by a register-mapped CPLD, which is on the DS21448 daughter card. The definition file for this CPLD is named DS21448DK02A0_CPLD.def. See the CPLD Register Map definitions. Quick Setup (Register View) * * * * The PC loads the program, offering a choice between DEMO MODE, REGISTER VIEW, and TERMINAL MODE. Select Register View. The program requests a definition file. Select DS21448DK02A0_CPLD.DEF. The Register View Screen appears, showing the register names, acronyms, and values. Note the CPLD def file contains a link such that the def file for the DS21448 is also loaded. Selection among the def files is accomplished using the drop-down box on the right-hand side of the program window. From the drop-down box, select the DS21448 def file and configure register CCR3 of ports 1 through 4 with a 90h. - The device begins transmitting a pseudo-random bit sequence. Upon external loopback, the RCL LED extinguishes, denoting that the device has found a carrier and has successfully decoded the pseudorandom bit sequence. For more advanced configurations, please refer to the DS21448 data sheet. 3 of 17 DS21448DK 3.3V E1/T1/J1 Line Interface Design Kit ADDRESS MAP The DK101 daughter card address space begins at 0x81000000. The DK2000 daughter card address space begins at: 0x30000000 for slot 0 0x40000000 for slot 1 0x50000000 for slot 2 0x60000000 for slot 3 All offsets in the Daughter Card Address Map table are relative to the beginning of the Daughter Card address space. Daughter Card Address Map OFFSET 0X0000 to 0X0015 0X2000 to 0X2015 0X3000 to 0X3015 0X4000 to 0X4015 0X5000 to 0X5015 DEVICE CPLD LIU Port 1 LIU Port 2 LIU Port 3 LIU Port 4 FUNCTION Board ID, clock and signal routing Board is populated with either the DS21Q348 or the DS21448. Please see the factory data sheet for details. Registers in the CPLD can be easily modified using ChipView, a host-based user-interface software with the definition file named DS21448DK02A0_CPLD.DEF. This file is included as part of the design kit documentation download (accessed through the DS21448's quick view data sheet) or the included CD-ROM. The definition file for the LIU is named DS21448.def. CPLD Register Map OFFSET 0X0000 0X0001 0X0002 0X0003 0X0004 0X0005 0X0006 0X0007 0X0011 0X0012 0X0013 0X0014 0X0015 REGISTER BID -- XBIDH XBIDM XBIDL BREV AREV PREV MCLK_SRC TCLK1_SRC TCLK2_SRC TCLK3_SRC TCLK4_SRC TYPE Read-Only -- Read-Only Read-Only Read-Only Read-Only Read-Only Read-Only Read-Write Read-Write Read-Write Read-Write Read-Write FUNCTION Board ID Unused High Nibble Extended Board ID Middle Nibble Extended Board ID Low Nibble Extended Board ID Board FAB Revision Board Assembly Revision PLD Revision MCLK Source Register TCLK1 Source Register TCLK2 Source Register TCLK3 Source Register TCLK4 Source Register ID Registers OFFSET 0X0000 0X0002 0X0003 0X0004 0X0005 0X0006 0X0007 NAME BID XBIDH XBIDM XBIDL BREV AREV PREV FUNCTION Board ID. BID is read-only with a value of 0xD. High Nibble Extended Board ID. XBIDH is read-only with a value of 0x00. Middle Nibble Extended Board ID. XBIDM is read-only with a value of 0x02. Low Nibble Extended Board ID. XBIDL is read-only with a value of 0x00. Board FAB Revision. BREV is read-only and displays the current fab revision. Board Assembly Revision. AREV is read-only and displays the assembly revision. PLD Revision. PREV is read-only and displays the current PLD firmware revision. 4 of 17 DS21448DK 3.3V E1/T1/J1 Line Interface Design Kit Control Registers The control registers are used set the clock frequency on the MCLK and TCLK pins. Options are 1.544MHz, 2.048MHz, external source (through AUX CLK BNC), and tri-state. MCLK_SRC: MCLK SOURCE (OFFSET = 0x0011) INITIAL VALUE = 0x1 (MSB) -- NAME HI_Z EXTOSC 2048MHZ 1544MHZ -- -- POSITION MCLK_SRC.3 MCLK_SRC.2 MCLK_SRC.1 MCLK_SRC.0 -- HI_Z EXTOSC FUNCTION 1 = Tri-state MCLK. 1 = Connect MCLK to the external oscillator. 1 = Connect MCLK to the 2.048MHz clock. 1 = Connect MCLK to the 1.544MHz clock. 2048MHZ (LSB) 1544MHZ TCLK1_SRC: TCLK SOURCE (OFFSET = 0x0012) INITIAL VALUE = 0x1 (MSB) -- NAME HI_Z EXTOSC 2048MHZ 1544MHZ -- -- POSITION TCLK1_SRC.3 TCLK1_SRC.2 TCLK1_SRC.1 TCLK1_SRC.0 -- HI_Z EXTOSC FUNCTION 1 = Tri-state TCLK1. 1 = Connect TCLK1 to the external oscillator. 1 = Connect TCLK1 to the 2.048MHz clock. 1 = Connect TCLK1 to the 1.544MHz clock. 2048MHZ (LSB) 1544MHZ TCLK2_SRC: TCLK SOURCE (OFFSET = 0x0013) INITIAL VALUE = 0x1 (MSB) -- NAME HI_Z EXTOSC 2048MHZ 1544MHZ -- -- POSITION TCLK2_SRC.3 TCLK2_SRC.2 TCLK2_SRC.1 TCLK2_SRC.0 -- HI_Z EXTOSC FUNCTION 1 = Tri-state TCLK2. 1 = Connect TCLK2 to the external oscillator. 1 = Connect TCLK2 to the 2.048MHz clock. 1 = Connect TCLK2 to the 1.544MHz clock. 2048MHZ (LSB) 1544MHZ TCLK3_SRC: TCLK SOURCE (OFFSET = 0x0014) INITIAL VALUE = 0x1 (MSB) -- NAME HI_Z EXTOSC 2048MHZ 1544MHZ -- -- POSITION TCLK3_SRC.3 TCLK3_SRC.2 TCLK3_SRC.1 TCLK3_SRC.0 -- HI_Z EXTOSC FUNCTION 1 = Tri-state TCLK3. 1 = Connect TCLK3 to the external oscillator. 1 = Connect TCLK3 to the 2.048MHz clock. 1 = Connect TCLK3 to the 1.544MHz clock. 2048MHZ (LSB) 1544MHZ 5 of 17 DS21448DK 3.3V E1/T1/J1 Line Interface Design Kit TCLK4_SRC: TCLK SOURCE (OFFSET = 0x0015) INITIAL VALUE = 0x1 (MSB) -- NAME HI_Z EXTOSC 2048MHZ 1544MHZ -- -- POSITION TCLK4_SRC.3 TCLK4_SRC.2 TCLK4_SRC.1 TCLK4_SRC.0 -- HI_Z EXTOSC FUNCTION 1 = Tri-state TCLK4. 1 = Connect TCLK4 to the external oscillator. 1 = Connect TCLK4 to the 2.048MHz clock. 1 = Connect TCLK4 to the 1.544MHz clock. 2048MHZ (LSB) 1544MHZ DS21448 INFORMATION For more information about the DS21448, please consult the DS21448 data sheet available on our website, www.maxim-ic.com/telecom. TECHNICAL SUPPORT For additional technical support, please email your questions to telecom.support@dalsemi.com. SCHEMATICS The D21448DK schematics are featured in the following pages. Maxim/Dallas Semiconductor cannot assume responsibility for use of any circuitry other than circuitry entirely embodied in a Maxim/Dallas Semiconductor product. No circuit patent licenses are implied. Maxim/Dallas Semiconductor reserves the right to change the circuitry and specifications without notice at any time. Maxim Integrated Products, 120 San Gabriel Drive, Sunnyvale, CA 94086 408-737-7600 (c) 2003 Maxim Integrated Products * Printed USA 6 of 17 (c) 2003 Maxim Integrated Products * Printed USA (c) 2003 Maxim Integrated Products * Printed USA (c) 2003 Maxim Integrated Products * Printed USA (c) 2003 Maxim Integrated Products * Printed USA (c) 2003 Maxim Integrated Products * Printed USA (c) 2003 Maxim Integrated Products * Printed USA (c) 2003 Maxim Integrated Products * Printed USA (c) 2003 Maxim Integrated Products * Printed USA (c) 2003 Maxim Integrated Products * Printed USA (c) 2003 Maxim Integrated Products * Printed USA (c) 2003 Maxim Integrated Products * Printed USA This datasheet has been download from: www..com Datasheets for electronics components. |
Price & Availability of DS21448DK
 |
|
|
|
|
All Rights Reserved © IC-ON-LINE 2003 - 2022 |
| [Add Bookmark] [Contact Us] [Link exchange] [Privacy policy] |
|
Mirror Sites : [www.datasheet.hk]
[www.maxim4u.com] [www.ic-on-line.cn]
[www.ic-on-line.com] [www.ic-on-line.net]
[www.alldatasheet.com.cn]
[www.gdcy.com]
[www.gdcy.net] |