|
If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
Datasheet File OCR Text: |
HWS415 GaAs DC-6 GHz DPDT Switch September 2006 V4 Features * Low Insertion Loss : 0.8 dB @ 2.5 GHz * * * * * QFN12L (3 x 3 mm) 1.0 dB @ 4.9 to 6.0 GHz High Isolation: 43 dB @ 2.5 GHz 36 dB @ 4.9 to 6.0 GHz Low DC Power Consumption Miniature QFN12L (3x3 mm) Plastic Lead (Pb) Free Package PHEMT process Lead Free and RoHS Compliant Version of HWS411 Description The HWS415 is a GaAs PHEMT MMIC DPDT switch operating at DC-6 GHz in a low cost miniature QFN12L (3 x 3 mm) plastic lead (Pb) free package. The HWS415 features low insertion loss and high isolation up to 6 GHz with very low DC power consumption. This switch can be used in IEEE 802.11a/b/g WLAN systems for combination of transmit/receive and antenna diversity functions. Electrical Specifications at 25 with 0, +3V Control Voltages C Parameter Insertion Loss Isolation (on/off or off/on) Isolation (off/off) Return Loss Input Power for One dB Compression Second Harmonic Third Harmonic Input Third Order Intermodulation Intercept Point Switching Time Control Current Test Conditions 0.1-6.0 GHz 2.4-2.5 GHz 4.9-6.0 GHz 0.1-6.0 GHz 2.4-2.5 GHz 4.9-6.0 GHz 2.4-2.5 GHz 4.9-6.0 GHz 0.1-6.0 GHz 2.4-2.5 GHz 4.9-6.0 GHz 2.0-6.0 GHz Pin=20 dBm Pin=20 dBm 20 dBm Per Tone @ 5.85 GHz Min. Typ. 1.0 0.8 1.0 36 43 36 10 17 15 20 18 30 -75 -75 45 50 5 Max. Unit dB dB dB dB dB dB dB dB dB dB dB dBm dBc dBc dBm ns uA 1.3 26 100 Note: All measurements made in a 50 ohm system with 0/+3.0V control voltages, unless otherwise specified. Hexawave Inc. 2 Prosperity Road II, Science-Based Industrial Park, Hsinchu, Taiwan. TEL 886-3-578-5100 FAX 886-3-577-0512 http://www.hw.com.tw All specifications are subject to change without notice. HWS415 GaAs DC-6 GHz DPDT Switch September 2006 V4 Typical Performance Data with 8pF Capacitors @ +25C Insertion Loss vs Frequency -0.2 -0.4 -0.6 -0.8 -1.0 Absolute Maximum Ratings Parameter RF Input Power Control Voltage Absolute Maximum +32 dBm @ +3V +6V -40 to +85C C -65 to +150 C C Insertion Loss(dB) Operating Temperature Storage Temperature Pin Out (Top View) TX RX 11 CB 2.0 2.5 3.0 3.5 4.0 4.5 5.0 Frequency(GHz) 5.5 6.0 12 GND 10 9 8 7 Isolation vs Frequency -20 GND 1 GND 2 CB GND GND VC2 6 -1.2 -30 Isolation(dB) VC1 3 4 5 -40 GND -50 CB -60 ANT1 -70 -80 2.0 2.5 3.0 3.5 4.0 4.5 5.0 Frequency(GHz) 5.5 6.0 Return Loss vs Frequency 0 -10 Return Loss(dB) Note: 1. DC blocking capacitors CB=8pF are required on all RF ports. 2. Exposed pad in the bottom must be connected to ground by via holes. 3. TX and RX ports can be used interchangeably. Logic Table for Switch On-Path VC1 1 0 VC2 0 1 1 0 ANT1-RX ANT1-TX ANT2-TX ANT2-RX On Off Off Off Off On Off Off On Off Off Off Off On Off Off -20 -30 1 -40 -50 2.0 2.5 3.0 3.5 4.0 4.5 5.0 Frequency(GHz) 5.5 6.0 0 `1' = +3V to +5V `0' = 0V to +0.2V Hexawave Inc. 2 Prosperity Road II, Science-Based Industrial Park, Hsinchu, Taiwan. TEL 886-3-578-5100 FAX 886-3-577-0512 http://www.hw.com.tw All specifications are subject to change without notice. ANT2 CB |
Price & Availability of HWS415 |
|
|
All Rights Reserved © IC-ON-LINE 2003 - 2022 |
[Add Bookmark] [Contact Us] [Link exchange] [Privacy policy] |
Mirror Sites : [www.datasheet.hk]
[www.maxim4u.com] [www.ic-on-line.cn]
[www.ic-on-line.com] [www.ic-on-line.net]
[www.alldatasheet.com.cn]
[www.gdcy.com]
[www.gdcy.net] |