 |
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
| Datasheet File OCR Text: |
| TLP160G TOSHIBA Photocoupler GaAs Ired & Photo-Triac TLP160G Triac Drive Programmable Controllers AC-Output Module Solid State Relay Unit in mm The TOSHIBA mini flat coupler TLP160G is a small outline coupler, suitable for surface mount assembly. The TLP160G consists of a photo triac, optically coupled to a gallium arsenide infrared emitting diode. * * * * * Peak off-state voltage: 400 V (min.) Trigger LED current: 10 mA (max.) On-state current: 70 mA (max.) Isolation voltage: 2500 Vrms (min.) UL recognized: UL1577, file No. E67349 TOSHIBA Weight: 0.09 g 11-4C3 Trigger LED Current Classi- fication* (IFT5) (IFT7) Standard Trigger LED Current (mA) VT=3V, Ta=25C Min. Max. 5 7 10 Marking of Classification T5 T5, T7 T5, T7, blank Pin Configurations 1 6 *Ex. (IFT5); TLP160G (IFT5) (Note) Application type name for certification test, please use standard product type name, i.e. TLP160G(IFT5): TLP160G 3 1. Anode 3. Cathode 4. Terminal 1 6. Terminal 2 4 1 2007-10-01 TLP160G Absolute Maximum Ratings (Ta = 25C) Characteristics Forward current Forward current derating (Ta 53C) LED Peak forward current (100s pulse, 100 pps) Reverse voltage Junction temperature Off- state output terminal voltage On-state RMS current Detector Ta=25C Ta=70C Symbol IF IF / C IFP VR Tj VDRM IT(RMS) IT / C ITP ITSM Tj Tstg Topr Tsol (Note) BVS Rating 50 -0.7 1 5 125 400 70 40 -0.67 2 1.2 115 -55~125 -40~100 260 2500 Unit mA mA / C A V C V mA mA / C A A C C C C Vrms On-state current derating (Ta 25C) Peak on-state current (100s pulse, 120 pps) Peak nonrepetitive surge current (PW=10ms, DC=10%) Junction temperature Storage temperature range Operating temperature range Lead soldering temperature (10s) Isolation voltage (AC, 1 min., R.H. 60%) Note: Using continuously under heavy loads (e.g. the application of high temperature/current/voltage and the significant change in temperature, etc.) may cause this product to decrease in the reliability significantly even if the operating conditions (i.e. operating temperature/current/voltage, etc.) are within the absolute maximum ratings. Please design the appropriate reliability upon reviewing the Toshiba Semiconductor Reliability Handbook ("Handling Precautions"/"Derating Concept and Methods") and individual reliability data (i.e. reliability test report and estimated failure rate, etc). (Note) Device considered a two terminal device: Pins 1 and 3 shorted together and pins 4 and 6 shorted together. Recommended Operating Conditions Characteristics Supply voltage Forward current Peak on-state current Operating temperature Symbol VAC IF ITP Topr Min. 15 -25 Typ. 20 Max. 120 25 1 85 Unit Vac mA A C Note: Recommended operating conditions are given as a design guideline to obtain expected performance of the device. Additionally, each item is an independent guideline respectively. In developing designs using this product, please confirm specified characteristics shown in this document. 2 2007-10-01 TLP160G Individual Electrical Characteristics (Ta = 25C) Characteristics Forward voltage LED Reverse current Capacitance Peak off-state current Peak on-state voltage Detector Holding current Critical rate of rise of off-state voltage Critical rate of rise of commutating voltage Symbol VF IR CT IDRM VTM IH dv / dt dv / dt(c) IF=10mA VR=5V V=0, f=1MHz VDRM=400V ITM=70mA Vin=120Vrms, Ta=85C IT=15mA, Vin=30Vrms (Fig.1) (Fig.1) Test Condition Min. 1.0 200 Typ. 1.15 30 10 1.7 0.6 500 0.2 Max. 1.3 10 1000 2.8 Unit V A pF nA V mA V / s V / s Coupled Electrical Characteristics (Ta = 25C) Characteristics Trigger LED current Capacitance input to output Isolation resistance Symbol IFT Cs RS VT=3V VS=0, f=1MHz VS=500V, R.H. 60% AC, 1 minute Isolation voltage BVS AC, 1 second, in oil DC, 1 minute, in oil Turn-on time tON VD=64V, RL = 100 IF=rated IFTx1.5 Test Condition Min. 1x10 12 Typ. 5 0.8 10 14 Max. 10 100 Unit mA pF Vrms Vdc s 2500 5000 5000 30 Fig.1 dv / dt Test Circuit Rin VCC + 120 1 3 6 4 Vin RL 2k 5VVCC 0V dv / dt (c) dv / dt 3 2007-10-01 TLP160G IF - Ta 60 120 IT(RMS) - Ta 50 100 Allowable forward current IF (mA) R.m.s. on-state current IT(RMS) (mA) 0 20 40 60 80 100 120 40 80 30 60 20 40 10 20 0 20 0 20 0 20 40 60 80 100 120 Ambient temperature Ta (C) Ambient temperature Ta (C) IFP - DR 3000 Pulse width 100s Ta = 25C 50 1000 500 100 Ta = 25C IF - V F Allowable pulse forward current IFP (mA) (mA) IF Forward current 103 3 102 3 101 3 100 30 10 5 3 100 50 1 0.5 0.3 10 0.1 0.6 0.8 1.0 1.2 1.4 1.6 1.8 Duty cycle ratio DR Forward voltage VF (V) VF / Ta 3.2 - IF 1000 500 300 IFP - VFP Forward voltage temperature coefficient VF / Ta (mV / C) 2.8 2.4 2.0 1.6 1.2 Pulse forward current IFP (mA) 100 50 30 10 5 3 1 0.6 Pulse width 10 s Repetitive frequency = 100 Hz Ta = 25C 0.8 0.4 0.1 0.3 0.5 1 3 5 10 30 50 1.0 1.4 1.8 2.2 2.6 3.0 Forward current IF (mA) Pulse forward voltage VFP (V) 4 2007-10-01 TLP160G Normalized IFT - Ta 3 VT3V 2 2 3 Normalized IH - Ta Trigger LED current IFT (arbitrary unit) 0.5 Holding current IH (arbitray unit) 20 60 80 100 1.2 1 1.2 1 0.5 0.3 0.3 0.1 40 20 0 40 0.1 40 20 0 20 40 60 80 100 Ambient temperature Ta (C) Ambient temperature Ta (C) Normalized IDRM - Ta 103 VDRM=Rated 1.4 Normalized VDRM - Ta 102 Off-state output terminal voltage VDRM(arbitrary unit) 1.2 Peak off-state current IDRM (Arbitrary unit) 1.0 0.8 101 0.6 0.4 100 0.2 40 20 0 20 40 60 80 100 0 20 40 60 80 100 Ambient temperature Ta (C) Ambient temperature Ta (C) Normalized LED Current LED Current Pulse Width 10 Normalized LED current IF / IFT 5 3 2 1.8 1.6 1.4 1.2 1 10 30 50 100 300 500 1000 LED current pulse width Pw (s) 5 2007-10-01 TLP160G RESTRICTIONS ON PRODUCT USE * The information contained herein is subject to change without notice. 20070701-EN * TOSHIBA is continually working to improve the quality and reliability of its products. Nevertheless, semiconductor devices in general can malfunction or fail due to their inherent electrical sensitivity and vulnerability to physical stress. It is the responsibility of the buyer, when utilizing TOSHIBA products, to comply with the standards of safety in making a safe design for the entire system, and to avoid situations in which a malfunction or failure of such TOSHIBA products could cause loss of human life, bodily injury or damage to property. In developing your designs, please ensure that TOSHIBA products are used within specified operating ranges as set forth in the most recent TOSHIBA products specifications. Also, please keep in mind the precautions and conditions set forth in the "Handling Guide for Semiconductor Devices," or "TOSHIBA Semiconductor Reliability Handbook" etc. * The TOSHIBA products listed in this document are intended for usage in general electronics applications (computer, personal equipment, office equipment, measuring equipment, industrial robotics, domestic appliances, etc.).These TOSHIBA products are neither intended nor warranted for usage in equipment that requires extraordinarily high quality and/or reliability or a malfunction or failure of which may cause loss of human life or bodily injury ("Unintended Usage"). Unintended Usage include atomic energy control instruments, airplane or spaceship instruments, transportation instruments, traffic signal instruments, combustion control instruments, medical instruments, all types of safety devices, etc.. Unintended Usage of TOSHIBA products listed in his document shall be made at the customer's own risk. * The products described in this document shall not be used or embedded to any downstream products of which manufacture, use and/or sale are prohibited under any applicable laws and regulations. * The information contained herein is presented only as a guide for the applications of our products. No responsibility is assumed by TOSHIBA for any infringements of patents or other rights of the third parties which may result from its use. No license is granted by implication or otherwise under any patents or other rights of TOSHIBA or the third parties. * GaAs(Gallium Arsenide) is used in this product. The dust or vapor is harmful to the human body. Do not break, cut, crush or dissolve chemically. * Please contact your sales representative for product-by-product details in this document regarding RoHS compatibility. Please use these products in this document in compliance with all applicable laws and regulations that regulate the inclusion or use of controlled substances. Toshiba assumes no liability for damage or losses occurring as a result of noncompliance with applicable laws and regulations. 6 2007-10-01 |
Price & Availability of TLP160G07
 |
|
|
|
|
All Rights Reserved © IC-ON-LINE 2003 - 2022 |
| [Add Bookmark] [Contact Us] [Link exchange] [Privacy policy] |
|
Mirror Sites : [www.datasheet.hk]
[www.maxim4u.com] [www.ic-on-line.cn]
[www.ic-on-line.com] [www.ic-on-line.net]
[www.alldatasheet.com.cn]
[www.gdcy.com]
[www.gdcy.net] |