View 2SC5906_4126085.PDF datasheet online --- IC-ON-LINE

Datasheet File OCR Text:

2SC5906
TOSHIBA Transistor Silicon NPN Epitaxial Type
2SC5906
High-Speed Switching Applications DC-DC Converter Applications Strobe Applications
* * * High DC current gain: hFE = 200 to 500 (IC = 0.5 A) Low collector-emitter saturation voltage: VCE (sat) = 0.2 V (max) High-speed switching: tf = 25 ns (typ.) Unit: mm
Absolute Maximum Ratings (Ta = 25C)
Characteristics Collector-base voltage Collector-emitter voltage Collector-emitter voltage Emitter-base voltage Collector current Base current Collector power dissipation Junction temperature Storage temperature range DC t = 10 s DC Pulse Symbol VCBO VCEX VCEO VEBO IC ICP IB PC (Note 1) Tj Tstg Rating 50 50 30 7 4 7 0.4 0.8 1.25 150 -55 to 150 Unit V V V V A A W C C
JEDEC JEITA TOSHIBA
2-3S1A
Weight: 0.01 g (typ.)
Note 1: Mounted on an FR4 board (glass epoxy, 1.6 mm thick, Cu area: 645 mm2) Note 2: Using continuously under heavy loads (e.g. the application of high temperature/current/voltage and the significant change in temperature, etc.) may cause this product to decrease in the reliability significantly even if the operating conditions (i.e. operating temperature/current/voltage, etc.) are within the absolute maximum ratings. Please design the appropriate reliability upon reviewing the Toshiba Semiconductor Reliability Handbook ("Handling Precautions"/Derating Concept and Methods) and individual reliability data (i.e. reliability test report and estimated failure rate, etc).
1
2006-11-13
2SC5906
Electrical Characteristics (Ta = 25C)
Characteristics Collector cut-off current Emitter cut-off current Collector-emitter breakdown voltage DC current gain Collector-emitter saturation voltage Base-emitter saturation voltage Collector output capacitance Rise time Switching time Storage time Fall time Symbol ICBO IEBO V (BR) CEO hFE (1) hFE (2) VCE (sat) VBE (sat) Cob tr tstg tf Test Condition VCB = 50 V, IE = 0 VEB = 7 V, IC = 0 IC = 10 mA, IB = 0 VCE = 2 V, IC = 0.5 A VCE = 2 V, IC = 1.6 A IC = 1.6 A, IB = 53 mA IC = 1.6 A, IB = 53 mA VCB = 10 V, IE = 0, f = 1 MHz See Figure 1. VCC 12 V, RL = 7.5 IB1 = -IB2 = 53 mA Min 30 200 120 Typ. 35 55 310 25 Max 0.1 0.1 500 0.20 1.10 ns V V pF Unit A A V
VCC 20 s IB1 IB1 RL Output
Input IB2
IB2 Duty cycle < 1%
Figure 1
Switching Time Test Circuit & Timing Chart
Marking
Part No. (or abbreviation code)
W
Lot code (year) Dot: even year No dot: odd year
P
Lot code (month)
2
2006-11-13
2SC5906
IC - VCE
8 Common emitter Ta = 25C 30000 20 16 10000
hFE - IC
(A)
DC current gain hFE
6 12 10 8 6 2 4 IB = 2mA 0 0 1 2 3 4 5 6
3000 1000 300 Ta = -55C 100 30 10 0.001 0.003 25 100
Collector current IC
4
Common emitter VCE = 2 V 0.01 0.03 0.1 0.3 1 3 10
Collector-emitter voltage VCE (V)
Collector current IC
(A)
VCE (sat) - IC
3 Common emitter 30 Common emitter 1 IC/IB = 30 0.3 0.1 0.03 Ta = -55C 0.01 0.003 0.001 0.001 0.003 25 100 10 IC/IB = 30 3 1 0.3 Ta = -55C
VBE (sat) - IC
Collector-emitter saturation voltage VCE (sat) (V)
Base-emitter saturation voltage VBE (sat) (V)
25 0.1 0.03 0.01 0.001 0.003 100
0.01
0.03
0.1
0.3
1
3
10
0.01
0.03
0.1
0.3
1
3
10
Collector current IC
(A)
Collector current IC
(A)
IC - VBE
7 6 Common emitter VCE = 2 V
(A)
5 4 3 Ta = 100C 2 1 0 0 25 -55
Collector current IC
0.4
0.8
1.2
1.6
Base-emitter voltage
VBE (V)
3
2006-11-13
2SC5906
rth - tw
1000 500
Transient thermal resistance rth (j-a) (C/W)
300
100 50 30
10 5 3 Curves should be applied in thermal limited area. Single no repetitive pulse Ta = 25C Mounted on an FR4 board 2 (glass epoxy, 1.6 mm thick, Cu area: 645 mm ) 0.01 0.1 1 10 100 1000
1 0.001
Pulse width
tw (s)
Safe Operating Area
10 IC max (pulsed) * 10 ms* 1 ms* 100 s* 10 s*
5 IC max (continuous) 100 ms* 3
(A)
1
IC
10 s* 0.5 0.3 DC operation* (Ta = 25C)
Collector current
0.1 *: Single pulse Ta = 25C Note that the curves for 100 ms, 10 s and DC operation will be 0.05 different when the devices aren't mounted on an FR4 0.03 board (glass epoxy, 1.6 mm 2 thick, Cu area: 645 mm ). These characteristic curves must be derated linearly with increase in temperature. 0.01 0.1 0.3 1 3
10
30
VCEO max 100
Collector-emitter voltage VCE (V)
4
2006-11-13
2SC5906
RESTRICTIONS ON PRODUCT USE
* The information contained herein is subject to change without notice.
20070701-EN
* TOSHIBA is continually working to improve the quality and reliability of its products. Nevertheless, semiconductor devices in general can malfunction or fail due to their inherent electrical sensitivity and vulnerability to physical stress. It is the responsibility of the buyer, when utilizing TOSHIBA products, to comply with the standards of safety in making a safe design for the entire system, and to avoid situations in which a malfunction or failure of such TOSHIBA products could cause loss of human life, bodily injury or damage to property. In developing your designs, please ensure that TOSHIBA products are used within specified operating ranges as set forth in the most recent TOSHIBA products specifications. Also, please keep in mind the precautions and conditions set forth in the "Handling Guide for Semiconductor Devices," or "TOSHIBA Semiconductor Reliability Handbook" etc. * The TOSHIBA products listed in this document are intended for usage in general electronics applications (computer, personal equipment, office equipment, measuring equipment, industrial robotics, domestic appliances, etc.).These TOSHIBA products are neither intended nor warranted for usage in equipment that requires extraordinarily high quality and/or reliability or a malfunction or failure of which may cause loss of human life or bodily injury ("Unintended Usage"). Unintended Usage include atomic energy control instruments, airplane or spaceship instruments, transportation instruments, traffic signal instruments, combustion control instruments, medical instruments, all types of safety devices, etc.. Unintended Usage of TOSHIBA products listed in his document shall be made at the customer's own risk. * The products described in this document shall not be used or embedded to any downstream products of which manufacture, use and/or sale are prohibited under any applicable laws and regulations. * The information contained herein is presented only as a guide for the applications of our products. No responsibility is assumed by TOSHIBA for any infringements of patents or other rights of the third parties which may result from its use. No license is granted by implication or otherwise under any patents or other rights of TOSHIBA or the third parties. * Please contact your sales representative for product-by-product details in this document regarding RoHS compatibility. Please use these products in this document in compliance with all applicable laws and regulations that regulate the inclusion or use of controlled substances. Toshiba assumes no liability for damage or losses occurring as a result of noncompliance with applicable laws and regulations.
5
2006-11-13

▲Up To Search▲

Price & Availability of 2SC5906

	To Download 2SC5906 Datasheet File
If you can't view the Datasheet, Please click here to try to view without PDF Reader .