 |
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
| Datasheet File OCR Text: |
| FREQUENCY QEUM5 / QEUM5-GW UM5 Crystal - Through Hole & Gull Wing SMD packaged Specification (Rev-C) Electrical Characteristics ......................................................P01 ESR vs. frequency range and Mode of vibration ..................P01 Mechanical Characteristics ...................................................P01 Ordering Information .............................................................P02 QEUM5-GW Tape Drawing ..................................................P02 Frequency QEUM5 / QEUM5-GW UM5 Crystal - Through Hole & Gull Wing SMD packaged Specification (rev-C) October 03rd, 2006 Electrical Characteristics Electrical Parameters Frequency range Temperature Stability Operating Temperature Range Storage temperature range Shunt capacitance C0 Load capacitance Drive level Aging (First Year) Insulator resistance Unit MHz ppm C C pF pF W ppm M 500 100 -40 Minimum Typical Maximum 10 10 10 30 30 -20/+70 200 50 50 -40/+85 +85 7.0 10pF ~ 32pF or series 500 3 Ref at 25C At 100VDC Customized specification upon request Refer to Ordering Information Refer to Ordering Information Refer to Ordering Information Refer to Ordering Information Test conditions Frequency Tolerance (at 25C) ppm ESR vs. frequency range and Mode of vibration Frequency range (MHz) Mode of vibration Max ESR () Frequency range (MHz) Mode of vibration Max ESR () 10.000 to 19.999 20.000 to 40.000 30.000 to 79.999 Fund. Fund. 3rd 60 40 100 80.000 to 105.000 60.000 to 129.999 130.000 to 200.000 3rd 5th 7th 80 200 180 Mechanical Characteristics QEUM5 QEUM5-GW O 0.35 0.05mm H 6 max [0.236] L 3.2 max [0.125] 1 TEMEX reserves the right to modify herein specifications and informations at any time when necessary to provide optimum performance and cost. Frequency QEUM5 / QEUM5-GW UM5 Crystal - Through Hole & Gull Wing SMD packaged Specification (rev-C) Marking for QEUM5 Line 1 VRDxxx (Temex code) Marking for QEUM5-GW VRSxxx (Temex code) October 03rd, 2006 Line 2 Frequency in MHz Frequency in MHz (6 digits) (6 digits) Line 3 YYWW - production code YYWW - production code Mechanical conditions Vibration 10g, 10Hz to 2KHz according to standard CEI 68-2-63 Shocks 100g, 6ms according to standard CEI 68-2-27 Note : QEUM5 & QEUM5-GW are fully RoHS compliant. Ordering Information QEUM5 1 30 Part numbering system HQ 50 16 25.000MHZ Package type Vibration mode 1 = Fundamental rd 3 = 3 Overtone th 5 = 5 Overtone th 7 = 7 Overtone Frequency tolerance Operating temperature range Frequency stability Load Capacitance 16=16pF Please, enter the value of load capacitance Nominal Frequency (MHz) Please enter the nominal frequency QEUM5 : UM5 Through Hole packaged QEUM5-GW : UM5 Gull Wing SMD packaged 10=10ppm 30=30ppm 50=30ppm D=-40C F= -30C H=-20C J=-10C L=0C M=+50C N=+55C O=+60C Q=+70C T=+85C 10=10ppm 30=20ppm 50=30ppm QEUM5-GW Tape Drawing Item Pitch of components Pitch of sprocket hole Length from hole to component center Width of carrier tape Width of adhesive tape Gap of hold down tape Diameter of feed hole Diameter of sprocket hole Symbol P PO P1 W W1 W2 DO D1 Dimensions 12 0.1 4 0.1 2 0.1 24 0.3 11.5 0.1 1.75 0.1 O 1.5 min O 1.5 0.1 Note 1 : Metal Clips are opposed to the the sprocket holes. Note 2 : Multiple is 1Kpcs per reel. 2 TEMEX reserves the right to modify herein specifications and informations at any time when necessary to provide optimum performance and cost. |
Price & Availability of QEUM5310DM1016
 |
|
|
|
|
All Rights Reserved © IC-ON-LINE 2003 - 2022 |
| [Add Bookmark] [Contact Us] [Link exchange] [Privacy policy] |
|
Mirror Sites : [www.datasheet.hk]
[www.maxim4u.com] [www.ic-on-line.cn]
[www.ic-on-line.com] [www.ic-on-line.net]
[www.alldatasheet.com.cn]
[www.gdcy.com]
[www.gdcy.net] |