View MCH3218_4115501.PDF datasheet online --- IC-ON-LINE

Datasheet File OCR Text:

Ordering number : ENN8184
MCH3218
MCH3218
Applications
*
NPN Epitaxial Planar Silicon Transistor
DC / DC Converter Applications
Relay drivers, lamp drivers, motor drivers, flash.
Features
* * * * * * *
Adoption of MBIT processes. Large current capacitance. Low collector-to-emitter saturation voltage. High-speed switching. Narrow hFE range. Ultrasmall package facilitates miniaturization in end products (mounting height : 0.85mm). High allowable power dissipation.
Specifications
Absolute Maximum Ratings at Ta=25C
Parameter Collector-to-Base Voltage Collector-to-Emitter Voltage Emitter-to-Base Voltage Collector Current Collector Current (Pulse) Base Current Collector Dissipation Junction Temperature Storage Temperature Symbol VCBO VCEO VEBO IC ICP IB PC Tj Tstg Mounted on a ceramic board (600mm2!0.8m) Conditions Ratings 40 30 6 1.5 3 300 0.7 150 --55 to +150 Unit V V V A A mA W C C
Electrical Characteristics at Ta=25C
Parameter Collector Cutoff Current Emitter Cutoff Current DC Current Gain Gain-Bandwidth Product Output Capacitance Symbol ICBO IEBO hFE fT Cob VCB=30V, IE=0 VEB=4V, IC=0 VCE=2V, IC=100mA VCE=10V, IC=300mA VCB=10V, f=1MHz 250 500 7 Conditions Ratings min typ max 0.1 0.1 400 MHz pF Unit A A
Marking : CN
Continued on next page.
Any and all SANYO products described or contained herein do not have specifications that can handle applications that require extremely high levels of reliability, such as life-support systems, aircraft's control systems, or other applications whose failure can be reasonably expected to result in serious physical and/or material damage. Consult with your SANYO representative nearest you before using any SANYO products described or contained herein in such applications. SANYO assumes no responsibility for equipment failures that result from using products at values that exceed, even momentarily, rated values (such as maximum ratings, operating condition ranges, or other parameters) listed in products specifications of any and all SANYO products described or contained herein.
SANYO Electric Co.,Ltd. Semiconductor Company
TOKYO OFFICE Tokyo Bldg., 1-10, 1 Chome, Ueno, Taito-ku, TOKYO, 110-8534 JAPAN
12505EA TS IM TB-00001033 No.8184-1/4
MCH3218
Continued from preceding page.
Parameter Collector-to-Emitter Saturation Voltage Base-to-Emitter Saturation Voltage Collector-to-Base Breakdown Voltage Collector-to-Emitter Breakdown Voltage Emitter-to-Base Breakdown Voltage Turn-ON Time Storage Time Fall Time Symbol VCE(sat) VBE(sat) V(BR)CBO V(BR)CEO V(BR)EBO ton tstg tf Conditions IC=750mA, IB=15mA IC=750mA, IB=15mA IC=10A, IE=0 IC=1mA, RBE= IE=10A, IC=0 See specified Test Circuit. See specified Test Circuit. See specified Test Circuit. 40 30 5 35 205 32 Ratings min typ 115 0.83 max 175 1.2 Unit mV V V V V ns ns ns
Package Dimensions
unit : mm 2194A
0.25
Switching Time Test Circuit
IB1 OUTPUT IB2 VR 50 RB + 100F VBE= --5V 3 + 470F VCC=12V
0.3 3
PW=20s D.C.1% 0.15 INPUT
RL
2.1
1.6
0.25
0.65 2.0
(Bottom view)
0.07
2
1
1 : Base 2 : Emitter 3 : Collector
1 2
(Top view)
IC=20IB1= --20IB2=750mA
0.85
SANYO : MCPH3
50mA 40mA 3 0mA
1.5
IC -- VCE
20 m
1.5
IC -- VBE
VCE=2V
1
5mA
A
1.2
Collector Current, IC -- A
5mA
Collector Current, IC -- A
10mA 8mA 6mA
4mA 3mA
1.0
0.9
0.6
Ta=75 C
0 0.1 0.2 0.3 0.4 0.5 0.6
2mA
0.5
1mA
0.3
0 0 0.2 0.4 0.6 0.8
IB=0
1.0 IT09005
0 0.7 0.8 0.9 1.0
Collector-to-Emitter Voltage, VCE -- V
Base-to-Emitter Voltage, VBE -- V
--25C
IT09006
25C
No.8184-2/4
MCH3218
1000
hFE -- IC
VCE=2V Collector-to-Emitter Saturation Voltage, VCE(sat) -- V
3 2
VCE(sat) -- IC
IC / IB=20
7 5
DC Current Gain, hFE
Ta=75C
25C
0.1 7 5 3 2
3
--25C
2
25
C
= Ta
--2
C 75
C 5
100 7 0.01
0.01 2 3 5 7 0.1 2 3 5 7 1.0 2 3 7 0.01 2 3 5 7 2 3 5 7 2 3
0.1
1.0
Collector Current, IC -- A
5 3 2
IT09007 2
VCE(sat) -- IC
Collector Current, IC -- A
IT09008
VBE(sat) -- IC
IC / IB=50 Collector-to-Emitter Saturation Voltage, VCE(sat) -- V Base-to-Emitter Saturation Voltage, VBE(sat) -- V
IC / IB=50
1.0
25C
Ta= --25C
75C
0.1 7 5 3 2
25C
T
7 a=
5C
7
5
5C --2
3
0.01 0.01
2
3
5
7 0.1
2
3
5
7 1.0
2
3
2 0.01
2
3
5
7
0.1
2
3
5
7
1.0
2 IT09010
Collector Current, IC -- A
1000
IT09009 5
f T -- IC
Collector Current, IC -- A
Cob -- VCB
VCE=10V Gain-Bandwidth Product, f T -- MHz
7 5
f=1MHz Output Capacitance, Cob -- pF
3 2
3 2
10 7 5
100 7 5 0.01
3 2 0.1
2
3
5
7
0.1
2
3
5
7
Collector Current, IC -- A
5 3 2
2 1.0 IT09011
2
3
5
7 1.0
2
3
5
7 10
2
3
5
ASO
Collector-to-Base Voltage, VCB -- V
0.8
IT09012
PC -- Ta
ICP=3A IC=1.5A
1m s 10
10s
0.7
Collector Dissipation, PC -- W
10
s s 00 0 5
M
0.6 0.5 0.4 0.3 0.2 0.1 0
Collector Current, IC -- A
1.0 7 5 3 2 0.1 7 5 3 2
m
DC
10
op era
s
ou
nt
0m
n
ed
s
on
ac
er
tio
am
ic
bo
ar
d
(6
00
m
m2 !
0.01 0.1
Ta=25C Single pulse Mounted on a ceramic board (600mm2!0.8mm)
2 3 5 7 1.0 2 3 5 7 10 2 3 5
0.
8m
m
)
160
0
20
40
60
80
100
120
140
Collector-to-Emitter Voltage, VCE -- V
IT09013
Ambient Temperature, Ta -- C
IT09004
No.8184-3/4
MCH3218
Specifications of any and all SANYO products described or contained herein stipulate the performance, characteristics, and functions of the described products in the independent state, and are not guarantees of the performance, characteristics, and functions of the described products as mounted in the customer's products or equipment. To verify symptoms and states that cannot be evaluated in an independent device, the customer should always evaluate and test devices mounted in the customer's products or equipment. SANYO Electric Co., Ltd. strives to supply high-quality high-reliability products. However, any and all semiconductor products fail with some probability. It is possible that these probabilistic failures could give rise to accidents or events that could endanger human lives, that could give rise to smoke or fire, or that could cause damage to other property. When designing equipment, adopt safety measures so that these kinds of accidents or events cannot occur. Such measures include but are not limited to protective circuits and error prevention circuits for safe design, redundant design, and structural design. In the event that any or all SANYO products(including technical data,services) described or contained herein are controlled under any of applicable local export control laws and regulations, such products must not be exported without obtaining the export license from the authorities concerned in accordance with the above law. No part of this publication may be reproduced or transmitted in any form or by any means, electronic or mechanical, including photocopying and recording, or any information storage or retrieval system, or otherwise, without the prior written permission of SANYO Electric Co., Ltd. Any and all information described or contained herein are subject to change without notice due to product/technology improvement, etc. When designing equipment, refer to the "Delivery Specification" for the SANYO product that you intend to use. Information (including circuit diagrams and circuit parameters) herein is for example only ; it is not guaranteed for volume production. SANYO believes information herein is accurate and reliable, but no guarantees are made or implied regarding its use or any infringements of intellectual property rights or other rights of third parties. This catalog provides information as of January, 2005. Specifications and information herein are subject to change without notice.
PS No.8184-4/4

▲Up To Search▲

Price & Availability of MCH3218

	To Download MCH3218 Datasheet File
If you can't view the Datasheet, Please click here to try to view without PDF Reader .