![]() |
|
If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
Datasheet File OCR Text: |
HMC573LC3B v00.0906 SMT GaAs MMIC x2 ACTIVE FREQUENCY MULTIPLIER, 8 - 22 GHz OUTPUT Features High Output Power: +12 dBm Low Input Power Drive: 0 to +6 dBm Fo Isolation: >20 dBc @ Fout= 16 GHz 100 KHz SSB Phase Noise: -134 dBc/Hz Single Supply: +5V@ 92 mA RoHS Compliant 3x3 mm SMT Package Typical Applications The HMC573LC3B is suitable for: * Clock Generation Applications: SONET OC-192 & SDH STM-64 * Point-to-Point & VSAT Radios * Test Instrumentation 7 FREQUENCY MULTIPLIERS - SMT * Military & Space Functional Diagram General Description The HMC573LC3B is a x2 active broadband frequency multiplier utilizing GaAs PHEMT technology in a leadless RoHS compliant SMT package. When driven by a +5 dBm signal, the multiplier provides +12 dBm typical output power from 8 to 22 GHz. The Fo and 3Fo isolations are >20 dBc and >25 dBc respectively at 16 GHz. The HMC573LC3B is ideal for use in LO multiplier chains for Pt to Pt & VSAT Radios yielding reduced parts count vs. traditional approaches. The low additive SSB Phase Noise of -134 dBc/Hz at 100 kHz offset helps maintain good system noise performance. The RoHS packaged HMC573LC3B eliminates the need for wire bonding, and allows the use of surface mount manufacturing techniques. Electrical Specifications, TA = +25C, Vdd = +5V, 5 dBm Drive Level Parameter Frequency Range, Input Frequency Range, Output Output Power Fo Isolation (with respect to output level) 3Fo Isolation (with respect to output level) 4Fo Isolation (with respect to output level) Input Return Loss Output Return Loss SSB Phase Noise (100 kHz Offset) Supply Current (Idd) (Vdd = 5V, Vgg = -1.25V Typ.) *Adjust Vgg between -1.5 and ~1.1V to achieve Idd = 92 mA 9 Min. Typ. 4 - 11 8 - 22 12 20 25 15 10 10 -134 92 Max. Units GHz GHz dBm dBc dBc dBc dB dB dBc/Hz mA 7 - 88 For price, delivery, and to place orders, please contact Hittite Microwave Corporation: 20 Alpha Road, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373 Order On-line at www.hittite.com HMC573LC3B v00.0906 SMT GaAs MMIC x2 ACTIVE FREQUENCY MULTIPLIER, 8 - 22 GHz OUTPUT Output Power vs. Temperature @ 5 dBm Drive Level 20 18 OUTPUT POWER (dBm) Output Power vs. Drive Level 20 15 10 5 0 -5 -10 OUTPUT POWER (dBm) 16 14 12 10 8 6 4 2 0 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 FREQUENCY (GHz) +25C +85C -40C 7 -2 dBm 0 dBm 2 dBm 4 dBm 6 dBm 8 dBm 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 FREQUENCY (GHz) Output Power vs. Supply Voltage @ 5 dBm Drive Level 20 18 OUTPUT POWER (dBm) Isolation @ 5 dBm Drive Level 20 15 OUTPUT POWER (dBm) 10 5 0 -5 -10 -15 -20 -25 -30 -35 Fo 2Fo 3Fo 4Fo 16 14 12 10 8 6 4 2 0 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 FREQUENCY (GHz) 4.5V 5.0V 5.5V 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 FREQUENCY (GHz) Output Power vs. Input Power 20 15 OUTPUT POWER (dBm) 10 Supply Current vs. Input Power 105 100 95 Idd (mA) 90 85 80 75 70 -10 5 0 -5 -10 -15 -20 -10 8GHz 14GHz 20GHz -8 -6 -4 -2 0 2 4 6 8 10 -8 -6 -4 -2 0 2 4 6 8 10 INPUT POWER (dBm) INPUT POWER (dBm) For price, delivery, and to place orders, please contact Hittite Microwave Corporation: 20 Alpha Road, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373 Order On-line at www.hittite.com 7 - 89 FREQUENCY MULTIPLIERS - SMT HMC573LC3B v00.0906 SMT GaAs MMIC x2 ACTIVE FREQUENCY MULTIPLIER, 8 - 22 GHz OUTPUT Input Return Loss vs. Temperature 0 Output Return Loss vs. Temperature 0 OUTPUT RETURN LOSS (dB) +25C +85C -40C INPUT RETURN LOSS (dB) -4 -4 7 FREQUENCY MULTIPLIERS - SMT -8 -8 -12 +25C +85C -40C -12 -16 -16 -20 3 4 5 6 7 8 9 10 11 12 FREQUENCY (GHz) -20 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 FREQUENCY (GHz) 7 - 90 For price, delivery, and to place orders, please contact Hittite Microwave Corporation: 20 Alpha Road, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373 Order On-line at www.hittite.com HMC573LC3B v00.0906 SMT GaAs MMIC x2 ACTIVE FREQUENCY MULTIPLIER, 8 - 22 GHz OUTPUT Absolute Maximum Ratings RF Input (Vdd = +5V) Supply Voltage (Vdd) Channel Temperature Continuous Pdiss (T= 85 C) (derate 8.0 mW/C above 85 C) Thermal Resistance (channel to ground paddle) Storage Temperature Operating Temperature +10 dBm +6.0 Vdc 175 C 719 mW 125 C/W -65 to +150 C -40 to +85 C Typical Supply Current vs. Vdd Vdd (Vdc) 4.5 5.0 5.5 Idd (mA) 90 92 94 7 FREQUENCY MULTIPLIERS - SMT 7 - 91 Note: Multiplier will operate over full voltage range shown above. ELECTROSTATIC SENSITIVE DEVICE OBSERVE HANDLING PRECAUTIONS Outline Drawing NOTES: 1. PACKAGE BODY MATERIAL: ALUMINA 2. LEAD AND GROUND PADDLE PLATING: 30-80 MICROINCHES GOLD OVER 50 MICROINCHES MINIMUM NICKEL. 3. DIMENSIONS ARE IN INCHES [MILLIMETERS]. 4. LEAD SPACING TOLERANCE IS NON-CUMULATIVE 5. PACKAGE WARP SHALL NOT EXCEED 0.05mm DATUM -C6. ALL GROUND LEADS AND GROUND PADDLE MUST BE SOLDERED TO PCB RF GROUND. 7. CLASSIFIED AS MOISTURE SENSITIVITY LEVEL (MSL) 1. For price, delivery, and to place orders, please contact Hittite Microwave Corporation: 20 Alpha Road, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373 Order On-line at www.hittite.com HMC573LC3B v00.0906 SMT GaAs MMIC x2 ACTIVE FREQUENCY MULTIPLIER, 8 - 22 GHz OUTPUT Pin Description Pin Number Function Description Package bottom must also be connected to RF/DC ground. Interface Schematic 7 FREQUENCY MULTIPLIERS - SMT 1, 3, 7, 9 GND 2 RFIN Pin is AC coupled and matched to 50 Ohms. These pins are internally not connected; however, this product was specified with these pins connected to RF/ DC ground. Pin is AC coupled and matched to 50 Ohms. 4 - 6, 11 N/C 8 RFOUT 10 Vdd Supply voltage 5V 0.5V. External bypass capacitors of 100 pF, 1,000 pF and 2.2 F are required. 12 Vgg Gate control for amplifier. Adjust to achieve Idd of 92 mA. Please follow "MMIC Amplifier Biasing Procedure" Application note. Application Circuit Component C1, C2 C3, C4 C5, C6 Value 100 pF 1,000 pF 2.2 F 7 - 92 For price, delivery, and to place orders, please contact Hittite Microwave Corporation: 20 Alpha Road, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373 Order On-line at www.hittite.com HMC573LC3B v00.0906 SMT GaAs MMIC x2 ACTIVE FREQUENCY MULTIPLIER, 8 - 22 GHz OUTPUT Evaluation PCB 7 FREQUENCY MULTIPLIERS - SMT List of Materials for Evaluation PCB 115739 [1] Item J1, J2 J3 - J5 C1, C2 C3, C4 C5, C6 U1 PCB [2] Description PCB Mount SRI K Connector DC Pin 100 pF Capacitor, 0402 Pkg. 1,000 pF Capacitor, 0603 Pkg. 2.2 F Tantalum Capacitor HMC573LC3B x2 Active Multiplier 115864 Eval Board [1] Reference this number when ordering complete evaluation PCB [2] Circuit Board Material: Rogers 4350 The circuit board used in the final application should be generated with proper RF circuit design techniques. Signal lines should have 50 ohm impedance while the package ground leads and exposed paddle should be connected directly to the ground plane similar to that shown. A sufficient number of via holes should be used to connect the top and bottom ground planes. The evaluation circuit board shown is available from Hittite upon request. For price, delivery, and to place orders, please contact Hittite Microwave Corporation: 20 Alpha Road, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373 Order On-line at www.hittite.com 7 - 93 |
Price & Availability of HMC573LC3B
![]() |
|
|
All Rights Reserved © IC-ON-LINE 2003 - 2022 |
[Add Bookmark] [Contact Us] [Link exchange] [Privacy policy] |
Mirror Sites : [www.datasheet.hk]
[www.maxim4u.com] [www.ic-on-line.cn]
[www.ic-on-line.com] [www.ic-on-line.net]
[www.alldatasheet.com.cn]
[www.gdcy.com]
[www.gdcy.net] |