View HT82M39A05_4111934.PDF datasheet online --- IC-ON-LINE

Datasheet File OCR Text:

HT82M39A 3-Key 3D PS/2 Mouse Controller
Feature
* Microsoft Intelli 3D PS/2 and IBM PS/2 mouse com* Z axis can support two kinds of scroller input
patible
* Supports rolling buttons in PS/2 mouse mode * X/Y axis photo input with built-in Holteks special dy-
(optomechanical and mechanical)
* 2MHz RC oscillator for system frequency with an ex-
ternal pull-high resistor
* 16-pin DIP package
namic photo-input resistor
* Supports three buttons and three axis (X, Y, Z) in-
puts
General Description
The HT82M39A is a Plug and Play PS/2 3D mouse controller. It is compatible with Microsoft Intelli 3D PS/2 mouse. The Z axis can support two kinds of scroller input, namely; optomechanical and mechanical.
Pin Assignment
Z1 1 2 3 4 5 6 7 8 H T82M 39A 1 6 D IP -A Z2 VDD NC VSS OSCI CLK DATA 16 15 14 13 12 11 10 9 Y2 Y1 X2 X1 TEST LB R0 RB
Pin Description
Pin No. 1, 2 3 4 5 6 7 8 Pin Name Z1, Z2 VDD NC VSS OSCI CLK DATA I/O I Description Z axis input supports two kinds of scroller input; optomechanical and mechanical.
3/4 Positive power supply 3/4 No connection 3/4 Negative power supply, ground I I/O I/O 2MHz RC oscillator for system frequency with external pull-high resistor and built-in C CLK I/O: PS/2 mouse CLK line. NMOS open drain output with 5kW pull-high resistor. DATA I/O: PS/2 mouse DATA line. NMOS open drain output with 5kW pull-high resistor. Right Button: Normal pull-low (50kW), Pressing the button connects to high. Rolling Button: Normal pull-low (50kW), Pressing the button connects to high. Left Button: Normal pull-low (50kW), Pressing the button connects to high. For IC manufacture testing, user should leave it floating. X/Y axis photo input with built-in Holteks special dynamic photo input resistor
9~11
RB, RO, LB
I
12 13~16
TEST X1, X2, Y1, Y2
I I
Rev. 1.40
1
September 23, 2005
HT82M39A
Absolute Maximum Ratings
Supply Voltage .........................................-0.3V to 6.5V Input Voltage..............................VSS-0.3V to VDD+0.3V Storage Temperature ............................-50C to 125C Operating Temperature...........................-25C to 70C
Note: These are stress ratings only. Stresses exceeding the range specified under Absolute Maximum Ratings may cause substantial damage to the device. Functional operation of this device at other conditions beyond those listed in the specification is not implied and prolonged exposure to extreme conditions may affect device reliability.
Electrical Characteristics
Symbol VDD IOP fOSC VIL1 VIH1 VIL2 VIH2 RPH2 Isink VIL3 VIH3 RPL3 VIL4 VIH4 RPL5 Parameter Operating Voltage Operating Current RC Oscillator Input Low Voltage (Z1, Z2) Input High Voltage (Z1, Z2) Input Low Voltage (CLK, DATA) Input High Voltage (CLK, DATA) Pull-high Resistor (CLK, DATA) Sink Current (CLK, DATA) Input Low Voltage (RB, Ro, LB) Input High Voltage (RB, Ro, LB) Pull-low Resistor (RB, Ro, LB) Input Low Voltage (X1,X2,Y1,Y2) Input high Voltage (X1, X2, Y1, Y2) Dynamic Photo-resistor (X1, X2, Y1, Y2, Z1, Z2) Test Conditions VDD 3/4 5V 5V 5V 5V 5V 5V 5V 5V 5V 5V 5V 5V 5V 5V VIL=0V 3/4 3/4 3/4 VIL=0V VOH=0.4V 3/4 3/4 Conditions 3/4 ROSC=130kW ROSC=130kW 3/4 3/4 3/4 3/4 Min. 4.75 3/4 1.6 0 2.2 0 2.0 2 4 0 1.8 3.0 0 2.2 Typ. 5.0 3/4 2 3/4 3/4 3/4 3/4 5 3/4 3/4 3/4 60 3/4 3/4 Max. 5.25 15 2.4 1.5 5 0.8 5.0 10 3/4 1.0 5 125 1.5 5
Ta=25C Unit V mA MHz V V V V kW mA V V kW V V
See Dynamic resistor characteristics
Dynamic Resistor Characteristics
* R-V curve
Photo_R: R-V
R
V
Rev. 1.40
2
September 23, 2005
HT82M39A
Functional Description
PS/2 Mouse
* PS/2 status byte
The x/y data report is 9-bit 2s complement The z data report is 8-bit 2s complement X movement towards the right is positive, moving towards the left is negative Y upward movement is positive, moving down is negative Z rolling towards the user is positive, else negative Button status: 1=pressed, 0=released
* Mouse mode changes between Standard and 3D
Byte 1 bit 7: Reserved 6: 0=Stream Mode, 1=Remote Mode 5: 0=Disabled, 1=Enabled 4: 0=Scaling 1:1, 1=Scaling 2:1 3: 1=Wrap Mode, 0=Stream or Remote (different from IBM specs.) 2: 1=Left Button Pressed 1: 1=Middle Button Pressed 0: 1=Right Button Pressed Byte 2 Bit 0~7 current resolution setting (Bit 0=LSB) Byte 3 Bit 0~7 current sampling rate (Bit 0=LSB)
* Standard PS/2 data format
PS/2 mode Sending the commands in the following sequence will set the mouse to 3D PS/2 mode. Command F3h C8h F3h 64h 0 L X0 Y0
Response From Mouse FAh FAh FAh FAh FAh FAh FAh, 03h
Variable rps, 0, 8, 1, bidirectional, synchronous Bit No. 1st word 2nd word 3rd word 7 6 5 4 3 1 X3 Y3 2 M X2 Y2 1 R X1 Y1
F3h 50h F2h
YV XV YS XS X7 Y7 X6 Y6 X5 Y5 X4 Y4
Any time the PC sends a reset FFh command to the mouse, it will reset the mouse to Standard PS/2 mode. After power-on reset is initiated, the mouse is set to Standard PS/2 mode.
* Data format for 3D PS/2
Variable rps, 0, 8, 1, bidirectional, synchronous Bit No. 1st word 2nd word 3rd word 4th word 7 YV X7 Y7 Z7 6 XV X6 Y6 Z6 5 YS X5 Y5 Z5 4 XS X4 Y4 Z4 3 1 X3 Y3 Z3 2 Ro X2 Y2 Z2 1 R X1 Y1 Z1 0 L X0 Y0 Z0
Rev. 1.40
3
September 23, 2005
HT82M39A
Timing Diagrams
X, Y Axis Photo-Coupler Crossed Width
X 1 (Y 1 ) (Z 1 ) X 2 (Y 2 ) (Z 2 ) tr tp tf
N o te : F o r X , Y - a x is tr, tp , tf > 3 0 m s F o r Z - a x is tr, tp , tf > 1 m s
X/Y/Z Axis Counting
X1 X2 +1 Z1 Z2 +1 +1 -1 -1 +1 +1 +1 -1 -1 -1 -1
Rev. 1.40
4
September 23, 2005
HT82M39A
PS/2 Mouse
* Data output
(1 ) CLK
(3 )
1st CLK
(3 )
2nd CLK
(3 )
(3 )
1 0 th CLK
(4 )
1 1 th CLK
T6
T3 (2 ) DATA T1 S ta r t B it T2
T4 B it 0 P a r ity B it
T5
(5 )
(7 )
S to p B it (6 )
T im in g P a r a m e te r
M in ./M a x . 5 /2 5 m s e c 5 /T 4 -5 m s e c 3 0 /5 0 m s e c 3 0 /5 0 m s e c >0 msec <50 msec
T1 T2 T3 T4 T5
T6
D A T A tr a n s itio n to th e fa llin g e d g e o f C L K R is in g e d g e o f C L K to D A T A tr a n s itio n In a c tiv e C L K D u r a tio n A c tiv e C L K D u r a tio n M in im u m tim e to in h ib it M O U S E a fte r c lo c k 1 1 M a x im u m tim e to in h ib it M O U S E a fte r c lo c k 1 1 to e n s u r e M O U S E d o e s n o t s ta r t a n o th e r tr a n s m is s io n
* Data input
(1 ) CLK (2 ) I/O In h ib it (4 ) 1 s t CLK 2nd CLK 9 th CLK 1 0 th CLK 1 1 th CLK (8 ) (6 ) P a r ity B it (5 ) S to p B it (7 )
T7 T9 DATA S ta r t B it (3 )
T8 B it 0 (5 )
T im in g P a r a m e te r T7 T8 T9 C L K D u r a tio n , lo w C L K D u r a tio n , h ig h T im e fr o m lo w to h ig h C L K tr a n s itio n to tim e w h e n M O U S E s a m p le s D A T A lin e
M in ./M a x . 3 0 /5 0 m s e c 3 0 /5 0 m s e c 5 /2 5 m s e c
Rev. 1.40
5
September 23, 2005
HT82M39A
Application Circuits
HT82M39A Z Axis Optomechanical (This Application Circuit is for Reference Only)
V 0 .1 m F IR 130kW IR R 1 2 3 4 5 6 7 8 470pF CLK DATA 68W 68W 470pF 16 15 14 13 12 11 10 9 IR 100mF
DD
Z1 Z2 VDD NC VSS OSCI CLK DATA H T82M 39A
Y2 Y1 X2 X1 TEST LB Ro RB
S1 S2 S3
R
HT82M39A Z Axis Mechanical (This Application Circuit is for Reference Only)
V 0 .1 m F 130kW IR Z - a x is M e c h n ic a l E encoder 1 2 3 4 5 6 7 8 470pF CLK DATA 68W 68W 470pF Z1 Z2 VDD NC VSS OSCI CLK DATA H T82M 39A Y2 Y1 X2 X1 TEST LB Ro RB 9 16 15 14 13 12 11 10 IR 100mF
DD
S1 S2 S3
R
Note:
R depends on IR characteristics, R=1K for reference only
Rev. 1.40
6
September 23, 2005
HT82M39A
Package Information
16-pin DIP (300mil) Outline Dimensions
A 16 B 1 9 8
H C D E F G
a
I
Symbol A B C D E F G H I a
Dimensions in mil Min. 745 240 125 125 16 50 3/4 295 335 0 Nom. 3/4 3/4 3/4 3/4 3/4 3/4 100 3/4 3/4 3/4 Max. 775 260 135 145 20 70 3/4 315 375 15
Rev. 1.40
7
September 23, 2005
HT82M39A
Holtek Semiconductor Inc. (Headquarters) No.3, Creation Rd. II, Science Park, Hsinchu, Taiwan Tel: 886-3-563-1999 Fax: 886-3-563-1189 http://www.holtek.com.tw Holtek Semiconductor Inc. (Taipei Sales Office) 4F-2, No. 3-2, YuanQu St., Nankang Software Park, Taipei 115, Taiwan Tel: 886-2-2655-7070 Fax: 886-2-2655-7373 Fax: 886-2-2655-7383 (International sales hotline) Holtek Semiconductor Inc. (Shanghai Sales Office) 7th Floor, Building 2, No.889, Yi Shan Rd., Shanghai, China 200233 Tel: 021-6485-5560 Fax: 021-6485-0313 http://www.holtek.com.cn Holtek Semiconductor Inc. (Shenzhen Sales Office) 5/F, Unit A, Productivity Building, Cross of Science M 3rd Road and Gaoxin M 2nd Road, Science Park, Nanshan District, Shenzhen, China 518057 Tel: 0755-8616-9908, 8616-9308 Fax: 0755-8616-9533 Holtek Semiconductor Inc. (Beijing Sales Office) Suite 1721, Jinyu Tower, A129 West Xuan Wu Men Street, Xicheng District, Beijing, China 100031 Tel: 010-6641-0030, 6641-7751, 6641-7752 Fax: 010-6641-0125 Holtek Semiconductor Inc. (Chengdu Sales Office) 709, Building 3, Champagne Plaza, No.97 Dongda Street, Chengdu, Sichuan, China 610016 Tel: 028-6653-6590 Fax: 028-6653-6591 Holmate Semiconductor, Inc. (North America Sales Office) 46729 Fremont Blvd., Fremont, CA 94538 Tel: 510-252-9880 Fax: 510-252-9885 http://www.holmate.com
Copyright O 2005 by HOLTEK SEMICONDUCTOR INC. The information appearing in this Data Sheet is believed to be accurate at the time of publication. However, Holtek assumes no responsibility arising from the use of the specifications described. The applications mentioned herein are used solely for the purpose of illustration and Holtek makes no warranty or representation that such applications will be suitable without further modification, nor recommends the use of its products for application that may present a risk to human life due to malfunction or otherwise. Holteks products are not authorized for use as critical components in life support devices or systems. Holtek reserves the right to alter its products without prior notification. For the most up-to-date information, please visit our web site at http://www.holtek.com.tw.
Rev. 1.40
8
September 23, 2005

▲Up To Search▲

Price & Availability of HT82M39A05

	To Download HT82M39A05 Datasheet File
If you can't view the Datasheet, Please click here to try to view without PDF Reader .